Energy, economic and environmental analysis on RET-hydrogen systems in residential buildings

The aim of this study was to analyze energy, economic and environmental performances of a set of scenarios dealing with the production and the use of hydrogen as energy carriers in residential applications in combination with renewable energy (RE).The authors also made an investigation into the required economic conditions necessary for making H₂–RE residential systems competitive with conventional ones, which are based on the use of grid electricity and natural gas.A case study was enacted in a small residential district in Palermo (Italy) made by five multi-storey buildings.Many energy systems have been considered according to several fuel-device combinations (electric grid, fuel cell, PV panels, wind turbines, boiler etc.).The software HOMER (hybrid optimization model for electric renewables), developed by NREL and Midwest Research Institute (USA), was used, in order to study the energy balance of the system and its components. Moreover, it was possible to simulate the hourly operation of each system and to calculate technical, economic and environmental performance parameters.The net present cost and the cost of energy are the two main parameters used to compare economic performances of the systems with both actual and expected costs in the medium term.A sensitivity analysis was carried out in order to appreciate the most important parameters influencing the economic performances of the systems and to define possible future scenarios of competitiveness between technologies.Emissions of CO₂ (the most important greenhouse gas) and other pollutants have been considered for an environmental benefits analysis.     

The utility of energy storage to improve the economics of wind–diesel power plants in Canada

Wind energy systems have been considered for Canada's remote communities in order to reduce their costs and dependence on diesel fuel to generate electricity. Given the high capital costs, low-penetration wind–diesel systems have been typically found not to be economic. High-penetration wind–diesel systems have the benefit of increased economies of scale, and displacing significant amounts of diesel fuel, but have the disadvantage of not being able to capture all of the electricity that is generated when the wind turbines operate at rated capacity.Two representative models of typical remote Canadian communities were created using HOMER, an NREL micro-power simulator to model how a generic energy storage system could help improve the economics of a high-penetration wind–diesel system. Key variables that affect the optimum system are average annual wind speed, cost of diesel fuel, installed cost of storage and a storage systems overall efficiency. At an avoided cost of diesel fuel of 0.30 $Cdn/kWh and current installed costs, wind generators are suitable in remote Canadian communities only when an average annual wind speed of at least 6.0 m/s is present. Wind energy storage systems become viable to consider when average annual wind speeds approach 7.0 m/s, if the installed cost of the storage system is less than 1000 $Cdn/kW and it is capable of achieving at least a 75% overall energy conversion efficiency. In such cases, energy storage system can enable an additional 50% of electricity from wind turbines to be delivered.     

Interfacing wind energy conversion equipment with utility systems

Technical interface issues between utility systems and solar technology devices are receiving increasing attention from government and industry. These issues arise from the intermittent power generation characteristics of solar systems, in contrast to most utility generation equipment. This paper explores the interface issues for wind energy systems, a solar technology likely to achieve early commercialization. Described are government- and industry-sponsored assessments of the impact of wind energy devices on industry operations, controls, and protective subsystems. The conclusions drawn indicate that: there does not appear to be any major technical interface problem in applying wind energy devices to utility power systems; current utility control and protection design methods are adequate for interfacing wind energy units with a utility system; and, the cost of control and protection for large (over 1 Mw) wind machines appears acceptable but may prove prohibitive for small machines. Several advanced technology options with the potential for reducing the costs for protection and control are also described, for both the wind machines and the utility system.     

Pricing district heating by marginal cost

A vital measure for industries when redirecting the energy systems towards sustainability is conversion from electricity to district heating (DH). This conversion can be achieved for example, by replacing electrical heating with DH and compression cooling with heat-driven absorption cooling. Conversion to DH must, however, always be an economically attractive choice for an industry. In this paper the effects for industries and the local DH supplier are analysed when pricing DH by marginal cost in combination with industrial energy efficiency measures. Energy audits have shown that the analysed industries can reduce their annual electricity use by 30% and increase the use of DH by 56%. When marginal costs are applied as DH tariffs and the industrial energy efficiency measures are implemented, the industrial energy costs can be reduced by 17%. When implementing the industrial energy efficiency measures and also considering a utility investment in the local energy system, the local DH supplier has a potential to reduce the total energy system cost by 1.6 million EUR. Global carbon dioxide emissions can be reduced by 25,000 tonnes if the industrial energy efficiency measures are implemented and when coal-condensing power is assumed to be the marginal electricity source.     

Analysis and techno-economic assessment of renewable hydrogen production and blending into natural gas for better sustainability

In this study, comprehensive thermodynamic analysis and techno-economic assessment studies of the renewable hydrogen production and its blending with natural gas in the existing pipelines are performed. Solar and wind energy-based on-grid and off-grid power systems are designed and compared in energy, exergy, and cost. Solar PV panels and wind turbines are particularly considered for electricity and hydrogen production for residential applications in an environmentally benign way. Fuel cell units are included to supply continuous electricity in the off-grid system. Here, the heat required for a community consisting of 100 houses is provided by hydrogen and natural gas mixture as a more environmentally benign fuel. The costs of capital, fuel, operation, and maintenance are calculated and evaluated in detail. The total net present costs are calculated as $6.95 million and $2.47 million for the off-grid and on-grid power systems, respectively. For the off-grid system, energy and exergy efficiencies are calculated as 32.64% and 40.73%, respectively. Finally, the energy and exergy efficiencies of the on-grid system are determined as 26.58% and 35.25%, respectively.     

Economical evaluation of electricity generation considering externalities

The economics of renewable energy are the largest barrier to renewable penetration. Nevertheless, the strong desire to reduce environmental emissions is considered a great support for renewable energy sources. In this paper, a full analysis for the cost of the kWh of electricity generated from different systems actually used in Egypt is presented. Also renewable energy systems are proposed and their costs are analyzed. The analysis considers the external cost of emissions from different generating systems. A proposed large scale PV plant of 3.3 MW, and a wind farm 11.25 MW grid connected at different sites are investigated. A life cycle cost analysis for each system was performed using the present value criterion. The comparison results showed that wind energy generation has the lowest cost, followed by a combined cycle–natural gas fired system. A photovoltaic system still uses comparatively expensive technology for electricity generation; even when external costs are considered the capital cost of photovoltaic needs to be reduced by about 60% in order to be economically competitive.     

Steps toward the hydrogen economy

The hydrogen economy is defined as the industrial system in which one of the universal energy carriers is hydrogen (the other is electricity) and hydrogen is oxidized to water that may be reused by applying an external energy source for dissociation of water into its component elements hydrogen and oxygen. There are three different primary energy-supply system classes which may be used to implement the hydrogen economy, namely, fossil fuels (coal, petroleum, natural gas, and as yet largely unused supplies such as shale oil, oil from tar sands, natural gas from geo-pressured locations, etc.), nuclear reactors including fission reactors and breeders or fusion nuclear reactors over the very long term, and renewable energy sources (including hydroelectric power systems, wind-energy systems, ocean thermal energy conversion systems, geothermal resources, and a host of direct solar energy-conversion systems including biomass production, photovoltaic energy conversion, solar thermal systems, etc.). Examination of present costs of hydrogen production by any of these means shows that the hydrogen economy favored by people searching for a non-polluting gaseous or liquid energy carrier will not be developed without new discoveries or innovations. Hydrogen may become an important market entry in a world with most of the electricity generated in nuclear fission or breeder reactors when high-temperature waste heat is used to dissociate water in chemical cycles or new inventions and innovations lead to low-cost hydrogen production by applying as yet uneconomical renewable solar techniques that are suitable for large-scale production such as direct water photolysis with suitably tailored band gaps on semiconductors or low-cost electricity supplies generated on ocean-based platforms using temperature differences in the tropical seas.     

Simulation and optimization of stand-alone hybrid renewable energy systems

Stand-alone hybrid renewable energy systems usually incur lower costs and demonstrate higher reliability than photovoltaic (PV) or wind systems. The most usual systems are PV–Wind–Battery and PV–Diesel–Battery. Energy storage is usually in batteries (normally of the lead-acid type). Another possible storage alternative, such as hydrogen, is not currently economically viable, given the high cost of the electrolyzers and fuel cells and the low efficiency in the electricity–hydrogen–electricity conversion. When the design of these systems is carried out, it is usually done resolve an optimization problem in which the Net Present Cost (NPC) is minimized or, in some cases, in relation to the Levelized Cost of Energy (LCE). The correct resolution of this optimization problem is a complex task because of the high number of variables and the non-linearity in the performance of some of the system components. This paper revises the simulation and optimization techniques, as well as the tools existing that are needed to simulate and design stand-alone hybrid systems for the generation of electricity.     

The financial viability of an SOFC cogeneration system in single-family dwellings

In the near future, fuel cell-based residential micro-CHP systems will compete with traditional methods of energy supply. A micro-CHP system may be considered viable if its incremental capital cost compared to its competitors equals to cumulated savings during a given period of time. A simplified model is developed in this study to estimate the operation of a residential solid oxide fuel cell (SOFC) system. A comparative assessment of the SOFC system vis-à-vis heating systems based on gas, oil and electricity is conducted using the simplified model for a single-family house located in Ottawa and Vancouver. The energy consumption of the house is estimated using the HOT2000 building simulation program. A financial analysis is carried out to evaluate the sensitivity of the maximum allowable capital cost with respect to system sizing, acceptable payback period, energy price and the electricity buyback strategy of an energy utility. Based on the financial analysis, small (1–2 kW_e) SOFC systems seem to be feasible in the considered case. The present study shows also that an SOFC system is especially an alternative to heating systems based on oil and electrical furnaces.     

Integration of wind power into the British system in 2020

This paper investigates the integration of renewable electricity into the UK system in 2020. The purpose is to find the optimal wind generation that can be integrated based on total cost of supply. Using EnergyPLAN model and the Department of Energy and Climate Change (DECC) energy projections as inputs, this paper simulates the total cost of electricity supply with various levels of wind generation considering two systems: a reference and an alternative system. The results show that 80 TWh of wind electricity is most preferable in both systems, saving up to 0.9% of total cost when compared to a conventional system without wind electricity production. The alternative system, with decentralized generation and active demand management, brings relatively more cost saving, and higher wind utilisation, compared to the reference case. The sensitivity analysis with alternative fuel and capital costs again confirms the superiority of the alternative over the reference system.     

Economic optimization and sensitivity analysis of photovoltaic system in residential buildings

This paper deals with the problem of optimal size of grid-connected photovoltaic (PV) system for residential application. It is assumed the PV system can input or output liberally the electricity to the utility electricity grid. A simple linear programming model is developed. The objective is to minimize the annual energy cost of a given customer, including PV investment cost, maintenance cost, utility electricity cost, subtracting the revenue from selling the excess electricity. The model reports the optimal PV capacity that customers adopt with their electricity requirements. Using this model, an investigation is conducted of economically optimal PV investment under several conditions for a typical residential building. Additionally, the sensitivity of levelized cost and simple payback period to various economic and technical circumstances has been analyzed.     

Small wind power generation using automotive alternator

The objective of this paper is to evaluate the feasibility of using claw pole automotive alternator as a generator for small wind turbine and to compare its energy yield and generated electricity cost with commercially available systems. The comparison is based on the energy yield per swept area and cost per energy produced in a low wind speed climate. Concepts such as the selection of suitable turbine parameters and gear ratio were used to achieve good matching of the turbine characteristics with measured alternator performance in order to improve the energy yield from the alternator in battery charging application. The energy yield from the alternator integrated to a 3.9 m diameter turbine is comparable with many commercially available turbines. The generated electricity cost of a commercially available turbine can be reduced by more than a factor of 2 by replacing its generator with our proposed alternator. The alternator-based turbine system is therefore a low cost solution aimed at making wind energy available to areas where the current cost of wind technology makes it prohibitive.     

Renewable energy as a natural gas price hedge: the case of wind

Electric utilities use natural gas to fuel many of their power plants, especially those plants which provide electricity at peak and intermediate hours. Natural gas prices are highly volatile and have shown a general upward trend. Wind energy can provide a cost-effective hedge against natural gas price volatility or price increases. This conclusion is based on analysis of the costs of marginal conventional generation given the historical probability distribution of natural gas prices, the cost of wind energy, wind integration costs, transmission costs for wind energy, the capacity value of wind, and environmental benefits of wind energy for a hypothetical utility in the Southwestern United States. The efficacy of using wind energy as a hedge at a particular utility will depend on site specific conditions.     

Representation of variable renewable energy sources in TIMER,an aggregated energy system simulation model

The power system is expected to play an important role in climate change mitigation. Variable renewable energy (VRE) sources, such as wind and solar power, are currently showing rapid growth rates in power systems worldwide, and could also be important in future mitigation strategies. It is therefore important that the electricity sector and the integration of VRE are correctly represented in energy models. This paper presents an improved methodology for representing the electricity sector in the long-term energy simulation model TIMER using a heuristic approach to find cost optimal paths given system requirements and scenario assumptions. Regional residual load duration curves have been included to simulate curtailments, storage use, backup requirements and system load factor decline as the VRE share increases. The results show that for the USA and Western Europe at lower VRE penetration levels, backup costs form the major VRE cost markup. When solar power supplies more than 30% of the electricity demand, the costs of storage and energy curtailments become increasingly important. Storage and curtailments have less influence on wind power cost markups in these regions, as wind power supply is better correlated with electricity demand. Mitigation scenarios show an increasing VRE share in the electricity mix implying also increasing contribution of VRE for peak and mid load capacity. In the current scenarios, this can be achieved by at the same time installing less capital intensive gas fired power plants. Sensitivity analysis showed that greenhouse gas emissions from the electricity sector in the updated model are particularly sensitive to the availability of carbon capture and storage (CCS) and nuclear power and the costs of VRE.     

Development of a thermoelectric self-powered residential heating system

Self-powered heating equipment has the potential for high overall energy efficiency and can provide an effective means of providing on site power and energy security in residential homes. It is also attractive for remote communities where connection to the grid is not cost effective. Self-powered residential heating systems operate entirely on fuel combustion and do not need externally generated electricity. Excess power can be provided for other electrical loads. To realize this concept, one must develop a reliable and low maintenance means of generating electricity and integrate it into fuel-fired heating equipment. In the present work, a self-powered residential heating system was developed using thermoelectric power generation technology. A thermoelectric module with a power generation capacity of 550 W was integrated into a fuel-fired furnace. The thermoelectric module has a radial configuration that fits well with the heating equipment. The electricity generated is adequate to power all electrical components for a residential central heating system. The performance of the thermoelectric module was examined under various operating conditions. The effects of heat transfer conditions were studied in order to maximize electric power output. A mathematical model was established and used to look into the influence of heat transfer coefficients and other parameters on electric power output and efficiency.     

Economic assessment of the engineering basis for wind power: Perspective of a vertically integrated utility

If wind park configurations are globally coordinated across the service area of a power utility, then electricity can be generated for the grid with substantial cost advantages. Based on this premise, the paper introduces a model by which large scale assessment of grid connected wind based power generation may be undertaken for a utility service area. The model can be useful to the policy maker for decisions regarding suitable wind portfolio standards (WPS) definition. The utility on the other hand, may use the model to study its service area for prospective wind based generation. Aspects of the problem modelled include cost-of-energy from individual generating units, daily load variations for the utility with emphasis on limited penetration, features of wind at prospective installation sites, makes of wind energy conversion systems (WECS) available, and recovery of expenditure through revenue. Application of the model to an assessment exercise for the state of Andhra Pradesh (India) is presented as an example.     

Economics of off-shore/on-shore wind energy systems in Qatar

This work presents an assessment of the potential and economical feasibility of adopting off-shore/on-shore wind energy as a renewable source of energy in Qatar. An analysis is presented for the long term measured on-shore wind speed (1976–2000) at Doha International Airport. A similar analysis is presented for the measured off-shore wind speed at the Qatari Haloul Island. For the on-shore measurements, the average annual wind speed (at 20 m height) was found to be about 5.1 m/s. On the other hand, for the off-shore measurements at Haloul, the average annual wind speed was found to be about 6.0 m/s. This result indicates the suitability of utilizing small to medium-size wind turbine generators, efficiently. Such generators can be implemented for water pumping and to produce sufficient electricity to meet vital, limited needs of remote locations, such as isolated farms, which do not have access to the national electricity grid. An economical assessment is presented which takes into consideration the interest recovery factor, the lifetime of the wind energy conversion system (WECS), the investment rate and operation and maintenance costs. The results indicate that the cost of electricity generation from the wind in Qatar compares favorably to that from fossil fuel resources. The feasibility of utilizing off-shore wind turbine systems to meet the power requirements of the island of Haloul and possibly provide additional power for nearby on-shore areas is discussed.     

Solar thermal power plants in the world: The experience of development and operation

The main areas of large-scale development of solar energy are: —conversion of solar energy into low-grade heat, and using the latest in heating systems of residential, municipal facilities, public and industrial buildings that consume energy such as temperature capacity; —conversion of solar energy into electricity through photovoltaic and thermodynamic converters. This report provides short information of the dynamics of the creation and operation of solar power plants (SPP) with the thermodynamic conversion, and the criteria for reducing cost of electricity produced from them.     

Steady-state performance of a grid-connected rooftop hybridwind-photovoltaic power system with battery storage

This paper reports the performance of a 4-kW grid-connected residential wind-photovoltaic system (WPS) with battery storage located in Lowell, MA, USA. The system was originally designed to meet a typical New-England (TNE) load demand with a loss of power supply probability (LPSP) of one day in ten years as recommended by the Utility Company. The data used in the calculation was wind speed and irradiance of Login Airport Boston (LAB) obtained from the National Climate Center in North Carolina. The present performance study is based on two-year operation. (May 1996-Apr 1998) of the WPS. Unlike conventional generation, the wind and the sunrays are available at no cost and generate electricity pollution-free. Around noontime the WPS satisfies its load and provides additional energy to the storage or to the grid. On-site energy production is undoubtedly accompanied with minimization of environmental pollution, reduction of losses in power systems transmission and distribution equipment, and supports the utility in demand side management. This paper includes discussion on system reliability, power quality, loss of supply and effects of the randomness of the wind and the solar radiation on system design