Ultralight and Binder‐Free All‐Solid‐State Flexible Supercapacitors for Powering Wearable Strain Sensors

Flexible energy storage devices play a pivotal role in realizing the full potential of flexible electronics. This work presents high‐performance, all‐solid‐state, flexible supercapacitors by employing an innovative multilevel porous graphite foam (MPG). MPGs exhibit superior properties, such as large specific surface area, high electric conductivity, low mass density, high loading efficiency of pseudocapacitive materials, and controlled corrugations for accommodating mechanical strains. When loaded with pseudocapacitive manganese oxide (Mn₃O₄), the MPG/Mn₃O₄ (MPGM) composites achieve a specific capacitance of 538 F g^?1 (1 mV s^?1) and 260 F g^?1 (1 mV s^?1) based on the mass of pure Mn₃O₄ and entire electrode composite, respectively. Both are among the best of Mn₃O₄‐based supercapacitors. The MPGM is mechanically robust and can go through 1000 mechanical bending cycles with only 1.5% change in electric resistance. When integrated as all‐solid‐state symmetric supercapacitors, they offer a full cell specific capacitance as high as 53 F g^?1 based on the entire electrode and retain 80% of capacitance after 1000 continuous mechanical bending cycles. Furthermore, the all‐solid‐state flexible supercapacitors are incorporated with strain sensors into self‐powered flexible devices for detection of both coarse and fine motions on human skins, i.e., those from finger bending and heart beating.     

Wood‐Inspired Morphologically Tunable Aligned Hydrogel for High‐Performance Flexible All‐Solid‐State Supercapacitors

Oriented microstructures are widely found in various biological systems for multiple functions. Such anisotropic structures provide low tortuosity and sufficient surface area, desirable for the design of high‐performance energy storage devices. Despite significant efforts to develop supercapacitors with aligned morphology, challenges remain due to the predefined pore sizes, limited mechanical flexibility, and low mass loading. Herein, a wood‐inspired flexible all‐solid‐state hydrogel supercapacitor is demonstrated by morphologically tuning the aligned hydrogel matrix toward high electrode‐materials loading and high areal capacitance. The highly aligned matrix exhibits broad morphological tunability (47–12 µm), mechanical flexibility (0°–180° bending), and uniform polypyrrole loading up to 7 mm thick matrix. After being assembled into a solid‐state supercapacitor, the areal capacitance reaches 831 mF cm^?2 for the 12 µm matrix, which is 259% times of the 47 µm matrix and 403% times of nonaligned matrix. The supercapacitor also exhibits a high energy density of 73.8 µWh cm^?2, power density of 4960 µW cm^?2, capacitance retention of 86.5% after 1000 cycles, and bending stability of 95% after 5000 cycles. The principle to structurally design the oriented matrices for high electrode material loading opens up the possibility for advanced energy storage applications.     

High Electroactive Material Loading on a Carbon Nanotube@3D Graphene Aerogel for High‐Performance Flexible All‐Solid‐State Asymmetric Supercapacitors

Freestanding carbon‐based hybrids, specifically carbon nanotube@3D graphene (CNTs@3DG) hybrid, are of great interest in electrochemical energy storage. However, the large holes (about 400 µm) in the commonly used 3D graphene foams (3DGF) constitute as high as 90% of the electrode volume, resulting in a very low loading of electroactive materials that is electrically connected to the carbon, which makes it difficult for flexible supercapacitors to achieve high gravimetric and volumetric energy density. Here, a hierarchically porous carbon hybrid is fabricated by growing 1D CNTs on 3D graphene aerogel (CNTs@3DGA) using a facile one‐step chemical vapor deposition process. In this architecture, the 3DGA with ample interconnected micrometer‐sized pores (about 5 µm) dramatically enhances mass loading of electroactive materials comparing with 3DGF. An optimized all‐solid‐state asymmetric supercapacitor (AASC) based on MnO₂@CNTs@3DGA and Ppy@CNTs@3DGA electrodes exhibits high volumetric energy density of 3.85 mW h cm^?3 and superior long‐term cycle stability with 84.6% retention after 20 000 cycles, which are among the best reported for AASCs with both electrodes made of pseudocapacitive electroactive materials.     

Capacitive Enhancement Mechanisms and Design Principles of High‐Performance Graphene Oxide‐Based All‐Solid‐State Supercapacitors

Graphene oxide (GO)‐based all‐solid‐state supercapacitors (GO‐A3Ss) are superior over liquid electrolyte‐based supercapacitors and capable of being integrated on a single chip in various geometry shapes for the use of future smart wearable electronics field as a fast energy storage device, but their capacitance need to be improved. Here, a new approach has been developed for enhancing the capacitive capability of the supercapacitors through molecular dynamics simulations with the first‐principle input. A theoretical model of charge storage is developed to understand the unique capacitive enhancement mechanism and to predict the capacitance of the GO‐A3Ss, which agrees well with the experimental observations. A novel supercapacitor with GO and reduced graphene oxide (rGO) alternatively layered structures is designed based on the model, and its energy density is the highest among conventional supercapacitors using liquid electrolytes and all‐solid‐state supercapacitors using aerogels or hydrogels as the solid‐state electrolyte. Based on the predictions, two new types of high‐performance GO/rGO multilayered capacitors are proposed to meet different practical applications. The results of this work provide an approach for the design of high‐performance all‐solid‐state supercapacitors based on GO and rGO materials.     

All‐Printed Flexible and Stretchable Electronics with Pressing or Freezing Activatable Liquid‐Metal–Silicone Inks

Liquid‐metal (LM)‐based flexible and stretchable electronics have attracted widespread interest in wearable computing, human–machine interaction, and soft robotics. However, many current examples are one‐off prototypes, whereas future implementation requires mass production. To address this critical challenge, an integrated multimaterial 3D printing process composed of direct ink writing (DIW) of sealing silicone elastomer and special LM‐silicone (LMS) inks for manufacturing high‐performance LM‐based flexible and stretchable electronics is presented. The LMS ink is a concentrated mixture of LM microdroplets and silicone elastomer and exhibits excellent printability for DIW printing. Guided by a verified theoretical model, a printing process with high resolution and high speed can be easily implemented. Although LMS is not initially conductive, it can be activated by pressing or freezing. Activated LMS possesses good conductivity and significant electrical response to strain. Owing to LMS's unique structure, LMS‐embedded flexible electronics exhibit great damage mitigation, in that no leaking occurs even when damaged. To demonstrate the flexibility of this process in fabricating LM‐based flexible electronics, multilayer soft circuits, strain sensors, and data gloves are printed and investigated. Notably, utilizing LMS's unique activating property, some functional circuits such as one‐time pressing/freezing‐on switch can be printed without any structural design.     

Conductive Metal–Organic Framework Nanowire Array Electrodes for High‐Performance Solid‐State Supercapacitors

The application of conventional metal–organic frameworks (MOFs) as electrode materials in supercapacitors is largely hindered by their conventionally poor electrical conductivity. This study reports the fabrication of conductive MOF nanowire arrays (NWAs) and the application of them as the sole electrode material for solid‐state supercapacitors. By taking advantage of the nanostructure and making full use of the high porosity and excellent conductivity, the MOF NWAs in solid‐state supercapacitor show the highest areal capacitance and best rate performance of all reported MOF materials for supercapacitors, which is even comparable to most carbon materials.     

All‐Solid‐State Asymmetric Supercapacitors with Metal Selenides Electrodes and Ionic Conductive Composites Electrolytes

All‐solid‐state flexible asymmetric supercapacitors (ASCs) are developed by utilization of graphene nanoribbon (GNR)/Co_0.85Se composites as the positive electrode, GNR/Bi₂Se₃ composites as the negative electrode, and polymer‐grafted‐graphene oxide membranes as solid‐state electrolytes. Both GNR/Co_0.85Se and GNR/Bi₂Se₃ composite electrodes are developed by a facile one‐step hydrothermal growth method from graphene oxide nanoribbons as the nucleation framework. The GNR/Co_0.85Se composite electrode exhibits a specific capacity of 76.4 mAh g^?1 at a current density of 1 A g^?1 and the GNR/Bi₂Se₃ composite electrode exhibits a specific capacity of 100.2 mAh g^?1 at a current density of 0.5 A g^?1. Moreover, the stretchable membrane solid‐state electrolytes exhibit superior ionic conductivity of 108.7 mS cm^?1. As a result, the flexible ASCs demonstrate an operating voltage of 1.6 V, an energy density of 30.9 Wh kg^?1 at the power density of 559 W kg^?1, and excellent cycling stability with 89% capacitance retention after 5000 cycles. All these results demonstrate that this study provides a simple, scalable, and efficient approach to fabricate high performance flexible all‐solid‐state ASCs for energy storage.     

Novel Core–Shell FeOF/Ni(OH)2 Hierarchical Nanostructure for All‐Solid‐State Flexible Supercapacitors with Enhanced Performance

Well‐controlled core–shell hierarchical nanostructures based on oxyfluoride and hydroxide are for the first time rationally designed and synthesized via a simple solvothermal and chemical precipitation route, in which FeOF nanorod acts as core and porous Ni(OH)₂ nanosheets as shell. When evaluated as electrodes for supercapacitors, a high specific capacitance of 1452 F g^?1 can be obtained at a current density of 1 A g^?1. Even as the current density increases to 10 A g^?1, the core–shell hybrid still reserves a noticeable capacitance of 1060 F g^?1, showing an excellent rate capacity. Furthermore, all‐solid‐state flexible asymmetric supercapacitor based on the FeOF/Ni(OH)₂ hybrid as a positive electrode and activated carbon as a negative electrode shows high power density, high energy density, and long cycling lifespan. The excellent electrochemical performance of the FeOF/Ni(OH)₂ core–shell hybrid is ascribed to the unique microstructure and synergistic effects. FeOF nanorod from FeF₃ by partial substitution of fluorine with oxygen behaves as a low intrinsic resistance, thus facilitating charge transfer processes. While the hierarchical Ni(OH)₂ nanosheets with large surface area provide enough active sites for redox chemical reactions, leading to greatly enhanced electrochemical activity. The well‐controllable oxyfluoride/hydroxide hybrid is inspiring, opening up a new way to design new electrodes for next‐generation all‐solid‐state supercapacitors.     

Self‐Powered Electronics by Integration of Flexible Solid‐State Graphene‐Based Supercapacitors with High Performance Perovskite Hybrid Solar Cells

To develop high‐capacitance flexible solid‐state supercapacitors and explore its application in self‐powered electronics is one of ongoing research topics. In this study, self‐stacked solvated graphene (SSG) films are reported that have been prepared by a facile vacuum filtration method as the free‐standing electrode for flexible solid‐state supercapacitors. The highly hydrated SSG films have low mass loading, high flexibility, and high electrical conductivity. The flexible solid‐state supercapacitors based on SSG films exhibit excellent capacitive characteristics with a high gravimetric specific capacitance of 245 F g^?1 and good cycling stability of 10 000 cycles. Furthermore, the flexible solid‐state supercapacitors are integrated with high performance perovskite hybrid solar cells (pero‐HSCs) to build self‐powered electronics. It is found that the solid‐state supercapacitors can be charged by pero‐HSCs and discharged from 0.75 V. These results demonstrate that the self‐powered electronics by integration of the flexible solid‐state supercapacitors with pero‐HSCs have great potential applications in storage of solar energy and in flexible electronics, such as portable and wearable personal devices.     

High‐Performance Ultrathin Flexible Solid‐State Supercapacitors Based on Solution Processable Mo1.33C MXene and PEDOT:PSS

MXenes, a young family of 2D transition metal carbides/nitrides, show great potential in electrochemical energy storage applications. Herein, a high performance ultrathin flexible solid‐state supercapacitor is demonstrated based on a Mo_1.33C MXene with vacancy ordering in an aligned layer structure MXene/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) composite film posttreated with concentrated H₂SO₄. The flexible solid‐state supercapacitor delivers a maximum capacitance of 568 F cm^?3, an ultrahigh energy density of 33.2 mWh cm^?3 and a power density of 19 470 mW cm^?3. The Mo_1.33C MXene/PEDOT:PSS composite film shows a reduction in resistance upon H₂SO₄ treatment, a higher capacitance (1310 F cm^?3) and improved rate capabilities than both pristine Mo_1.33C MXene and the nontreated Mo_1.33C/PEDOT:PSS composite films. The enhanced capacitance and stability are attributed to the synergistic effect of increased interlayer spacing between Mo_1.33C MXene layers due to insertion of conductive PEDOT, and surface redox processes of the PEDOT and the MXene.     

Printed and Electrochemically Gated,High‐Mobility,Inorganic Oxide Nanoparticle FETs and Their Suitability for High‐Frequency Applications

Solution‐processed or printed n‐channel field‐effect transistors (FETs) with high performance are not reported very often in the literature due to the scarcity of high‐mobility n‐type organic semiconductors. On the other hand, low‐temperature processed n‐channel metal oxide semiconductor (NMOS) transistors from electron conducting inorganic‐oxide nanoparticles show reduced‐performance and low mobility because of large channel roughness at the channel‐dielectric interface. Here, a method to produce ink‐jet printed high performance NMOS transistor devices using inorganic‐oxide nanoparticles as the transistor channel in combination with a 3D electrochemical gating (EG) via printed composite solid polymer electrolytes is presented. The printed FETs produced show a device mobility value in excess of 5 cm² V^?1 s^?1, even though the root mean square (RMS) roughness of the nanoparticulate channel exceeds 15 nm. Extensive studies on the frequency dependent polarizability of composite polymer electrolyte capacitors show that the maximum attainable speed in such printed, long channel transistors is not limited by the ionic conductivity of the electrolytes. Therefore, the approach of combining printable, high‐quality oxide nanoparticles and the composite solid polymer electrolytes, offers the possibility to fully utilize the large mobility of oxide semiconductors to build all‐printed and high‐speed devices. The high polarizability of printable polymer electrolytes brings down the drive voltages to ≤1 V, making such FETs well‐suited for low‐power, battery compatible circuitry.     

Sustainable Synthesis and Assembly of Biomass‐Derived B/N Co‐Doped Carbon Nanosheets with Ultrahigh Aspect Ratio for High‐Performance Supercapacitors

The practical application of graphene has still been hindered by high cost and scarcity in supply. It boosts great interest in seeking for low‐cost substitute of graphene for upcoming usage where extremely physical properties are not absolutely critical. The conversion of renewable biomass offers a great opportunity for sustainable and economic fabrication of 2D carbon nanostructures. However, large‐scale production of carbon nanosheets with ultrahigh aspect ratio, satisfied electronic properties, and the capability of organized assembly like graphene has been rarely reported. In this work, a facile yet efficient approach for mass production of flexible boric/nitrogen co‐doped carbon nanosheets with very thin thickness of 5–8 nm and ultrahigh aspect ratio of over 6000–10 000 is demonstrated by assembling the biomass molecule in long‐range order on 2D hard template and subsequent annealing. The advantage of these doped carbon nanosheets over conventional products lies in that they can be readily assembled to multilevel architectures such as freestanding flexible thin film and ultralight aerogels with better electrical properties, which exhibit exceptional capacitive performance for supercapacitor application. The recyclability of boric acid template further reduces the discharge of the waste and processing cost, rendering high cost‐effectiveness and environmental benignity for scalable production.     

3D Printed Supercapacitor: Techniques,Materials, Designs,and Applications

Supercapacitors (SCs) offer broad possibilities in the rising domain of military and civilian owing to their intrinsic properties of superior power density, long lifetime, and safety features. Despite of low-cost, facile manufacture, and time-saving, 3D printing technology unleashes the potential of SCs in terms of achieving desirable capacitance with high mass loading, fabrication of well-designed complicated structures, and direct construction of on-chip integration systems. In this review, first, the representative printing technologies for SCs and advanced printable materials are scrutinized for SCs and advanced printable materials. Then the structure design principles of electrodes and devices are respectively highlighted and reported cases are systematically summarized. Next, configurations of the SCs and their applications in various areas are described in detail. Finally, the promising research directions for the future are discussed. The perspectives reviewed here are expected to provide a comprehensive understanding of 3D-printed SCs and guidance in realizing their promise in various applications.     

Controlled Incorporation of Ni(OH)2 Nanoplates Into Flowerlike MoS2 Nanosheets for Flexible All‐Solid‐State Supercapacitors

In this work, self‐supporting three‐dimensional hierarchical nanostructured MoS₂@Ni(OH)₂ nanocomposites are synthesized via a facile single‐mode microwave hydrothermal technique. The fabricated MoS₂@Ni(OH)₂ nanocomposites for supercapacitors in aqueous electrolyte exhibit higher specific capacitance and better cyclic stability than those of MoS₂ and Ni(OH)₂ due to the pronounced synergistic effect between MoS₂ and Ni(OH)₂. Further, the flexible all‐solid‐state supercapcitor is readily constructed by composing the PVA/KOH gel electrolyte in between two MoS₂@Ni(OH)₂ electrodes on the flexible PET substrates. The resulting supercapacitors can operate at high rate up to 1000 V/s, have excellent long‐life cycling stability, retaining 94.2% of the initial capacitance after 9000 cycles, and mechanical flexibility during extreme bending, respectively. Thereby, the MoS₂@Ni(OH)₂ nanocomposites are a promising electrode materials for flexible long‐life cycling all‐solid‐sate supercapacitors.     

A Low‐Cost,Self‐Standing NiCo2O4@CNT/CNT Multilayer Electrode for Flexible Asymmetric Solid‐State Supercapacitors

The demand for a new generation of flexible, portable, and high‐capacity power sources increases rapidly with the development of advanced wearable electronic devices. Here we report a simple process for large‐scale fabrication of self‐standing composite film electrodes composed of NiCo₂O₄@carbon nanotube (CNT) for supercapacitors. Among all composite electrodes prepared, the one fired in air displays the best electrochemical behavior, achieving a specific capacitance of 1,590 F g^?1 at 0.5 A g^?1 while maintaining excellent stability. The NiCo₂O₄@CNT/CNT film electrodes are fabricated via stacking NiCo₂O₄@CNT and CNT alternately through vacuum filtration. Lightweight, flexible, and self‐standing film electrodes (≈24.3 µm thick) exhibit high volumetric capacitance of 873 F cm^?3 (with an areal mass of 2.5 mg cm^?2) at 0.5 A g^?1. An all‐solid‐state asymmetric supercapacitor consists of a composite film electrode and a treated carbon cloth electrode has not only high energy density (≈27.6 Wh kg^?1) at 0.55 kW kg^?1 (including the weight of the two electrodes) but also excellent cycling stability (retaining ≈95% of the initial capacitance after 5000 cycles), demonstrating the potential for practical application in wearable devices.     

Phthalocyanine‐Based 2D Conjugated Metal‐Organic Framework Nanosheets for High‐Performance Micro‐Supercapacitors

2D conjugated metal‐organic frameworks (2D c‐MOFs) are emerging as a novel class of conductive redox‐active materials for electrochemical energy storage. However, developing 2D c‐MOFs as flexible thin‐film electrodes have been largely limited, due to the lack of capability of solution‐processing and integration into nanodevices arising from the rigid powder samples by solvothermal synthesis. Here, the synthesis of phthalocyanine‐based 2D c‐MOF (Ni₂[CuPc(NH)₈]) nanosheets through ball milling mechanical exfoliation method are reported. The nanosheets feature with average lateral size of ≈160 nm and mean thickness of ≈7 nm (≈10 layers), and exhibit high crystallinity and chemical stability as well as a p‐type semiconducting behavior with mobility of ≈1.5 cm² V^?1 s^?1 at room temperature. Benefiting from the ultrathin feature, the nanosheets allow high utilization of active sites and facile solution‐processability. Thus, micro‐supercapacitor (MSC) devices are fabricated mixing Ni₂[CuPc(NH)₈] nanosheets with exfoliated graphene, which display outstanding cycling stability and a high areal capacitance up to 18.9 mF cm^?2; the performance surpasses most of the reported conducting polymers‐based and 2D materials‐based MSCs.     

Hierarchical NiMoS and NiFeS Nanosheets with Ultrahigh Energy Density for Flexible All Solid‐State Supercapacitors

Highly flexible supercapacitors (SCs) have great potential in modern electronics such as wearable and portable devices. However, ultralow specific capacity and low operating potential window limit their practical applications. Herein, a new strategy for the fabrication of free‐standing Ni?Mo?S and Ni?Fe?S nanosheets (NSs) for high‐performance flexible asymmetric SC (ASC) through hydrothermal and subsequent sulfurization technique is reported. The effect of Ni²⁺ is optimized to attain hierarchical Ni?Mo?S and Ni?Fe?S NS architectures with high electrical conductivity, large surface area, and exclusive porous networks. Electrochemical properties of Ni?Mo?S and Ni?Fe?S NS electrodes exhibit that both have ultrahigh specific capacities (≈312 and 246 mAh g^?1 at 1 mA cm^?2), exceptional rate capabilities (78.85% and 78.46% capacity retention even at 50 mA cm^?2, respectively), and superior cycling stabilities. Most importantly, a flexible Ni?Mo?S NS//Ni?Fe?S NS ASC delivers a high volumetric capacity of ≈1.9 mAh cm^?3, excellent energy density of ≈82.13 Wh kg^?1 at 0.561 kW kg^?1, exceptional power density (≈13.103 kW kg^?1 at 61.51 Wh kg^?1) and an outstanding cycling stability, retaining ≈95.86% of initial capacity after 10 000 cycles. This study emphasizes the potential importance of compositional tunability of the NS architecture as a novel strategy for enhancing the charge storage properties of active electrodes.     

Inkjet Printed Negative Supercapacitors: Synthesis of Polyaniline‐Based Inks,Doping Agent Effect,and Advanced Electronic Devices Applications

Low frequency negative supercapacitors and high frequency negative capacitors are realized developing a polyaniline (PANI) based ink for piezoelectric inkjet printers, water based. PANI is synthesized by oxidation polymerization starting from the aniline dimer, thus avoiding the use of a toxic/mutagen substance such as aniline. In order to work in aqueous phase, the reverse addition of the dimer in the oxidative solution is made. The chlorinated emeraldine salt of PANI is produced and emeraldine base is prepared by dedoping. Two different doped PANI solutions are produced by solubilization of the emeraldine salt in dimethylsulphoxide and addition of respectively trifluorosulfonic acid and camporsulfonic acid, and then used as inks for the fabrication of inkjet‐printed tracks of different geometries. The properties of inkjet‐printed devices are characterized both in DC and AC regimes, showing very good performances under specific measurement conditions in terms of conductivity, as well as extremely interesting phenomena whose origin is still under debate, such as low frequency negative supercapacitance, high frequency negative capacitance and negative resistance. The realization of the highest negative supercapacitance realized so far, of –2.3 mF @ 30 Hz, corresponding to a specific mass capacity of –799 F g^?1, is reported.