Effect of octa(aminopropyl) polyhedral oligomeric silsesquioxane (OapPOSS) functionalized graphene oxide on the mechanical,thermal, and hydrophobic properties of waterborne polyurethane composites

A novel graphene nanomaterial functionalized by octa(aminopropyl) polyhedral oligomeric silsesquioxane (OapPOSS) was synthesized and then confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), Raman spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy with energy‐dispersive X‐ray spectroscopy (SEM EDX), atomic force microscopy, and X‐ray diffraction. The obtained functionalized graphene (OapPOSS‐GO) was used to reinforce waterborne polyurethane (WPU) to obtain OapPOSS‐GO/WPU nanocomposites by in situ polymerization. The thermal, mechanical, and hydrophobic properties of nanocomposites as well as the dispersion behavior of OapPOSS‐GO in the polymer were investigated by TGA, a tensile testing machine, water contact angle tests, and field emission SEM, respectively. Compared with GO/WPU and OapPOSS/WPU composites, the strong interfacial interaction between OapPOSS‐GO and the WPU matrix facilitates a much better dispersion and load transfer from the WPU matrix to the OapPOSS‐GO. It was found that the tensile strength of the OapPOSS‐GO/WPU composite film with 0.20 wt % OapPOSS‐GO exhibited a 2.5‐fold increase in tensile strength, compared with neat WPU. Better thermal stability and hydrophobicity of nanocomposites were also achieved by the addition of OapPOSS‐GO. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44440.     

Preparation of heat resisting poly(methyl methacrylate)/graphite composite microspheres used as ultra‐lightweight proppants

Ultra‐lightweight heat resisting poly(methyl methacrylate) (PMMA)/graphite microspheres were successfully prepared via in situ suspension polymerization. The Fourier transform infrared and X‐ray powder diffraction results confirmed the successful preparation of the composite microspheres. Field emission scanning electron microscope analysis illustrated that the graphite particles were dispersed in microspheres and the PMMA/graphite composite microspheres had good sphericity and roundness. Furthermore, density analysis indicated that the apparent density of composites microspheres was about 1.055–1.135g/cm³ which was suitable for the transmission with water carrying. The results from thermodynamic test revealed that the thermal stability of the composite was significantly improved with increasing graphite content, which could be used as ultra‐lightweight proppant in deep underground. In addition, the crushing rate decreased to 0.5% with graphite ratio of 3.0% at the pressure of 69 MPa. Therefore, PMMA/Graphite composite microspheres exhibit a promising application in petroleum or gas exploitation as water carrying fracturing proppants. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41924.     

Preparation and electrochemical properties of polyaniline/reduced graphene oxide composites

Polyaniline (PANI)/reduced graphene oxide (rGO) composites were synthesized by in situ oxidative polymerization of aniline on reduced graphene sheets. Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, transmission electron microscopy, and scanning electron microscopy were used to characterize the composites. The results indicated PANI/rGO composites were produced and contained covalent bonds between the functional groups of PANI and rGO. A uniform coating of PANI on the rGO sheets had a synergistic effect on the properties of the composites. The electrochemical properties of the PANI/rGO composites produced using different feed ratios of aniline to rGO were studied. The results showed that the composites exhibited a maximum specific capacitance of 797.5 F/g at 0.5 A/g and minimum charge transfer resistance of 0.98 Ω when the feed ratio of aniline to rGO was 2:1. These values were superior to those of pure PANI and rGO. The composites also displayed excellent cycling stability, with specific capacitance retention of 92.43% after 1000 cycles. These stable structural composites show promise for the development of new supercapacitor applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46103.     

Synthesis of polythiophene/graphene oxide composites by interfacial polymerization and evaluation of their electrical and electrochemical properties

We report a new method for the synthesis of polythiophene (PTh)/graphene oxide (GO) nanocomposites by interfacial polymerization. Polymerization occurred at the interface of two immiscible solvents, i.e. n‐hexane containing thiophene and nitromethane containing GO and an initiator. Characterizations were done using Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and electrochemical and electrical conductivity measurements. Spectroscopic analyses showed successful incorporation of GO in the PTh matrix. Morphological analysis revealed good dispersion of GO sheets in the polymer matrix. The PTh/GO composites showed marked improvements in thermal stability and electrical conductivity (2.7 × 10^?4 S cm^?1) compared to pure PTh. The composites exhibited excellent electrochemical reversibility compared to pure PTh at a scan rate of 0.1 V s^?1. The composites were stable even up to 100 electrochemical cycles, indicating good cycle performance. The specific capacitance of the composites was calculated using cyclic voltammetry and was found to be 99 F g^?1. © 2014 Society of Chemical Industry     

Thermal and mechanical properties of liquid silicone rubber composites filled with functionalized graphene oxide

To improve the thermal and mechanical properties of liquid silicone rubber (LSR) for application, the graphene oxide (GO) was proposed to reinforce the LSR. The GO was functionalized with triethoxyvinylsilane (TEVS) by dehydration reaction to improve the dispersion and compatibility in the matrix. The structure of the functionalized graphene oxide (TEVS‐GO) was evaluated by Thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectra, X‐ray diffraction (XRD), and energy dispersive X‐ray spectroscopy (EDX). It was found that the TEVS was successfully grafted on the surface of GO. The TEVS‐GO/LSR composites were prepared via in situ polymerization. The structure of the composites was verified by FTIR, XRD, and scanning electron microscopy (SEM). The thermal properties of the composites were characterized by TGA and thermal conductivity. The results showed that the 10% weight loss temperature (T₁₀) increased 16.0°C with only 0.3 wt % addition of TEVS‐GO and the thermal conductivity possessed a two‐fold increase, compared to the pure LSR. Furthermore, the mechanical properties were studied and results revealed that the TEVS‐GO/LSR composites with 0.3 wt % TEVS‐GO displayed a 2.3‐fold increase in tensile strength, a 2.79‐fold enhancement in tear strength, and a 1.97‐fold reinforcement in shear strength compared with the neat LSR. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42582.     

Mechanical and piezo‐resistive properties of styrene–butadiene–styrene copolymer covalently modified with graphene/styrene–butadiene–styrene composites

As novel piezoelectric materials, carbon‐reinforced polymer composites exhibit excellent piezoelectric properties and flexibility. In this study, we used a styrene–butadiene–styrene triblock copolymer covalently grafted with graphene (SBS‐g‐RGO) to prepare SBS‐g‐RGO/styrene–butadiene–styrene (SBS) composites to enhance the organic solubility of graphene sheets and its dispersion in composites. Once exfoliated from natural graphite, graphene oxide was chemically modified with 1,6‐hexanediamine to functionalize with amino groups (GO–NH₂), and this was followed by reduction with hydrazine [amine‐functionalized graphene oxide (RGO–NH₂)]. SBS‐g‐RGO was finally obtained by the reaction of RGO–NH₂ and maleic anhydride grafted SBS. After that, X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and other methods were applied to characterize SBS‐g‐RGO. The results indicate that the SBS molecules were grafted onto the graphene sheets by covalent bonds, and SBS‐g‐RGO was dispersed well. In addition, the mechanical and electrical conductivity properties of the SBS‐g‐RGO/SBS composites showed significant improvements because of the excellent interfacial interactions and homogeneous dispersion of SBS‐g‐RGO in SBS. Moreover, the composites exhibited remarkable piezo resistivity under vertical compression and great repeatability after 10 compression cycles; thus, the composites have the potential to be applied in sensor production. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46568.     

Polymer nanocomposites: In situ polymerization of polyamide 6 in the presence of graphene oxide

Polyamide 6 (PA6)/graphene oxide (GO) nanocomposites were prepared via in situ , ring opening polymerization of ε‐caprolactam in the presence of both dried powder and colloidally dispersed single layer GO. Characterization of the composites and GO (both as received and after removal from the composites) was carried out using atomic force microscopy (AFM), Fourier transform infra‐red spectroscopy (FTIR), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), thermogravimetric analysis, differential scanning calorimetry and tensile testing. Reduction in the GO during polymerization was observed. So too was functionalization of the GO flakes with PA6 chains. FTIR demonstrates the retention of some carbonyl oxygen functionalities after polymerization. AFM imaging indicated the presence of single layer GO and the sheet height increased to ∼4 nm for graphene sheets after polymerization. This suggests the graphene acts as a base for polymer chain formation, leading to good interfacial interaction between the filler and matrix. Raman data show no evidence of the restoration of sp2 hybrid as a result of polymerization. The nanocomposites are thermally stable while molecular weight and crystallinity have both been affected by GO inclusion. A percentage linear increase in Young's modulus was observed as colloidally dispersed GO content increased. POLYM. COMPOS., 38:528–537, 2017. © 2015 Society of Plastics Engineers     

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

To avoid introduction of milling media during ball‐milling process and ensure uniform distribution of SiC and graphite in ZrB₂ matrix, ultrafine ZrB₂–SiC–C composite powders were in‐situ synthesized using inorganic–organic hybrid precursors of Zr(OPr)₄, Si(OC₂H₅)₄, H₃BO₃, and excessive C₆H₁₄O₆ as source of zirconium, silicon, boron, and carbon, respectively. To inhabit grain growth, the ZrB₂–SiC–C composite powders were densified by spark plasma sintering (SPS) at 1950°C for 10 min with the heating rate of 100°C/min. The precursor powders were investigated by thermogravimetric analysis–differential scanning calorimetry and Fourier transform infrared spectroscopy. The ceramic powders were analyzed by X‐ray diffraction, X‐ray photoelectron spectroscopy, and scanning electron microscopy. The lamellar substance was found and determined as graphite nanosheet by scanning electron microscopy, Raman spectrum, and X‐ray diffraction. The SiC grains and graphite nanosheets distributed in ZrB₂ matrix uniformly and the grain sizes of ZrB₂ and SiC were about 5 μm and 2 μm, respectively. The carbon converted into graphite nanosheets under high temperature during the process of SPS. The presence of graphite nanosheets alters the load‐displacement curves in the fracture process of ZrB₂–SiC–G composite. A novel way was explored to prepare ZrB₂–SiC–G composite by SPS of in‐situ synthesized ZrB₂–SiC–C composite powders.     

Thermogravimetric and resistivity study of Ex situ and In situ poly(methyl methacrylate)/carboxylic acid group functionalized multiwall carbon nanotubes composites

Polymer composites based on poly(methyl methacrylate) (PMMA)/carboxylic acid group functionalized multiwall carbon nanotubes (MWCNT) were prepared by the ex situ and in situ techniques with 0.05% loading by weight. Composite films were fabricated by solvent casting method. Electrical conductivity of the composites as well as of the neat PMMA polymer was measured in the temperature range 333 K to 423 K. Neat PMMA samples prepared by the same method showed complete insulating behavior. Ex situ technique leads to a lower value of percolation threshold. Infrared spectroscopy was used to analyze the effect of functionalization of MWCNT on the interfacial bonding of PMMA and MWCNT. Thermogravimetric analysis revealed that the maximum degradation temperature has been shifted to higher region for in situ composites compared to PMMA itself—and the ex situ composites indicated better thermal stability. X‐ray diffraction study of composites also indicates that in situ composites functionalization incorporated MWCNT particles in the polymer chain. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(methyl methacrylate)‐grafted cellulose nanocrystals: One‐step synthesis,nanocomposite preparation,and characterization

Cellulose nanocrystals (CNCs) are ideal reinforcing agents for polymer nanocomposites because they are lightweight and nano‐sized with a large aspect ratio and high elastic modulus. To overcome the poor compatibility of hydrophilic CNCs in non‐polar composite matrices, we grafted poly(methyl methacrylate) (PMMA) from the surface of CNCs using an aqueous, one‐pot, free radical polymerization method with ceric ammonium nitrate as the initiator. The hybrid nanoparticles were characterized by CP/MAS NMR, X‐ray photoelectron spectroscopy, infrared spectroscopy, contact angle, thermogravimetric analysis, X‐ray diffraction, and atomic force microscopy. Spectroscopy demonstrates that 0.11 g/g (11 wt %) PMMA is grafted from the CNC surface, giving PMMA‐g‐CNCs, which are similar in size and crystallinity to unmodified CNCs but have an onset of thermal degradation 45 °C lower. Nanocomposites were prepared by compounding unmodified CNCs and PMMA‐g‐CNCs (0.0025–0.02 g/g (0.25–2 wt %) loading) with PMMA using melt mixing and wet ball milling. CNCs improved the performance of melt‐mixed nanocomposites at 0.02 g/g (2 wt %) loading compared to the PMMA control, while lower loadings of CNCs and all loadings of PMMA‐g‐CNCs did not. The difference in Young's modulus between unmodified CNC and polymer‐grafted CNC composites was generally insignificant. Overall, ball‐milled composites had inferior mechanical and rheological properties compared to melt‐mixed composites. Scanning electron microscopy showed aggregation in the samples with CNCs, but more pronounced aggregation with PMMA‐g‐CNCs. Despite improving interfacial compatibility between the nanoparticles and the matrix, the effect of PMMA‐g‐CNC aggregation and decreased thermal stability dominated the composite performance.     

Preparation and thermal conductivity of novolac/Ni/graphite nanosheet composites

A high thermal conductivity novolac/nickel/graphite nanosheet (novolac/Ni/NanoG) composite was synthesized through in situ polymerization. Graphite nanosheet (NanoG) was prepared by sonicating expanded graphite (EG) in an aqueous alcohol solution and was plated with nickel through an electrodeposition method. The X‐ray diffraction spectrum shows that nickel was successfully plated onto the graphite surface and the nickel thickness is about 27.89 nm. The microstructures of the Ni/NanoG were characterized by scanning electron microscopy and transmission electron microscopy. The results reveal that nickel particles with the average diameter of 25 nm are coated on NanoG surface homogeneously and densely. Energy dispersive spectrometry spectrum confirms that the Ni content coated on NanoG surface, whose atomic percentage is 61%, is much higher than that of C element. The values predicted by theoretical model were underestimated the thermal conductivity of novolac/Ni/NanoG composites. Among NG, EG, NanoG, and Ni/NanoG four kinds of particles, the Ni/NanoG improved the thermal conductivity of novolac resin significantly. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Evaluation of polymethacrylic ionomer as compatibilizers for MCPA6/clay composites

The compatibilization effects provided by polymethacrylic ionomer (PMMA ionomer) on monomer‐casting polyamide6 (MCPA6)/clay (pristine sodium montmorillonite) composites were studied in this work. The PMMA ionomer used in this study was sodium polymethacrylate ionomer (PMMA Na⁺‐ionomer), which is a copolymer of methyl methacrylate and sodium methacrylate, prepared using emulsion polymerization. MCPA6/clay/PMMA Na⁺‐ionomer composites were prepared by in situ anionic ring‐opening polymerization (AROP) of ε‐caprolactam (CLA). X‐ray diffraction (XRD) and transmission electron microscopy (TEM) plus rheological measurement were used to characterize those composites. The results indicated that PMMA Na⁺‐ionomer is a good compatibilizer for this system. With increasing PMMA Na⁺‐ionomer content, a better dispersion of clay layers was successfully achieved in the MCPA6 matrix. Furthermore, differential scanning calorimetry (DSC) and XRD results indicated that well dispersed silicate layers limit the mobility of the MCPA6 molecule chains to crystallize, reduce the degree crystalline, and favor the formation of the γ‐crystalline form of the MCPA6 matrix. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation of highly thermally conducting polyamide 6/graphite composites via low‐temperature in situ expansion

Highly thermally conducting polyamide 6 (PA6) composites with high loadings of low‐temperature expandable graphite (LTEG) were prepared by an in situ exfoliation melting process, and the thermal conductivity of the composites was measured by a hot‐disk method. A two‐point method was applied to evaluate the electrical conductivity of the composites with various graphite loadings, and the thermal percolation was observed in the vicinity of the electrical percolation threshold concentration. Dynamic rheology analysis was used to define the geometric change caused by the interconnection of the in situ exfoliated graphite flakes. X‐ray diffraction measurement confirmed that the exfoliation of LTEG was crucial to the overall thermal conductivity of the composites. Dynamic mechanical analysis revealed that the incorporation of LTEG significantly improved the damping properties of PA6. Thermogravimetric analysis and differential scanning calorimetry measurements were applied to study the thermal properties of the investigated PA6/LTEG composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39596.     

Preparation and Characterization of Insensitive HMX/Graphene Oxide Composites

To improve the safety of HMX, a two‐dimensional (2D) graphene oxide (GO) was introduced to HMX by the solvent nonsolvent method. The morphology, composition, thermal decomposition characteristic were characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), thermogravimetry (TG) and differential scanning calorimetry (DSC). Compared to the previous reports, GO sheets exhibited better desensitizing effect than [60]Fullerene and CNTs. When 2.0 wt‐% GO sheets were added, the impact sensitivity of raw HMX decreased from 100 to 10 %, and the friction sensitivity reduced from 100 to 32 %. The DSC results proved that GO sheets were compatible with HMX. In addition, by determining the thermal decomposition kinetic parameters of the samples, it was found that the activation energy (E_a) of HMX with 2.0 wt‐% GO increased by 23.5 kJ mol⁻¹, suggesting that GO sheets could improve the thermal stability of HMX.     

Preparation and properties of octadecylamine modified graphene oxide/styrene‐butadiene rubber composites through an improved melt compounding method

Octadecylamine modified graphene oxide/styrene‐butadiene rubber (GO‐ODA/SBR) composites are prepared by a novel and environmental‐friendly method called “Improved melt compounding”. A GO‐ODA/ethanol paste mixture is prepared firstly, and then blended with SBR by melt compounding. GO‐ODA sheets are uniformly dispersed in SBR as confirmed by scanning electron microscope, transmission electron microscopy, and X‐ray diffraction. The interfacial interaction between GO‐ODA and SBR is weaker than that between GO and SBR, which is proved by equilibrium swelling test and dynamic mechanical analysis. GO‐ODA/SBR show more pronounced “Payne effect” than GO/SBR composites, indicating enhanced filler networks resulted from the modification of GO with ODA. GO‐ODA/SBR composite has higher tensile strength and elongation at break than SBR and GO/SBR composite. The tensile strength and elongation at break for the composite with 5 parts GO‐ODA per hundred parts of rubber increase by 208% and 172% versus neat SBR, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42907.     

Epoxy/p‐phenylenediamine functionalized graphene oxide composites and evaluation of their fracture toughness and tensile properties

In an attempt to enhance the mechanical properties of epoxy/graphene‐based composites, the interface was engineered through the functionalization of graphene oxide (GO) sheets with p‐phenylenediamine; this resulted in p‐phenylenediamine functionalized graphene oxide (GO–pPDA). The morphology and chemical structure of the GO–pPDA sheets were studied by spectroscopic methods, thermal analysis, X‐ray diffraction, and transmission electron microscopy. The characterization results show the successful covalent functionalization of GO sheets through the formation of amide bonds. In addition, p‐phenylenediamine were polymerized on graphene sheets to form crystalline nanospheres; this resulted in a GO/poly(p‐phenylenediamine) hybrid. The mechanical properties of the epoxy/GO–pPDA composite were assessed. Although the Young's modulus showed improvement, more significant improvements were observed in the strength, fracture strain, and plane‐strain fracture toughness. These improvements were attributed to the unique microstructure and strong interface between GO–pPDA and the epoxy matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43821.     

Electroconductive and catalytic performance of polypyrrole/montmorillonite/silver composites synthesized through in situ oxidative polymerization

The present study demonstrates a simple approach to the formation of polypyrrole/montmorillonite/silver (PPy/Mt/Ag) composites via in situ oxidative polymerization of pyrrole (Py) in the presence of AgNO₃ acting as a direct oxidant. The polymerization was performed in the presence of dodecylbenzenesulfonic acid, which acts as a stabilizing and doping agent. The morphological, structural, and thermal properties of PPy/Mt/Ag composites are discussed in detail and a possible formation mechanism is proposed. The electrical conductivities of the composites pressed at different pressing pressures were investigated using four‐probe analyzer. X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy results indicated the partially exfoliated structure of the composites and Fourier transforms infrared results suggested the strong interactions between Si? O? Si groups in Mt and N? H groups in PPy chains. The addition of Mt in the PPy polymer enhanced thermal property of the polymer. The conductivity of 1.08 S cm^?1 was observed in the sample with 20 wt % Mt loading and applied pressure of 5 MPa. The composites obtained in the present study catalyze the reduction of methylene blue by sodium borohydride, achieving 92% conversion of MB to colorless within a few minutes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45986.     

Comparative studies of the properties of poly(methyl methacrylate)–clay nanocomposite materials prepared by in situ emulsion polymerization and solution dispersion

A series of polymer–clay nanocomposite (PCN) materials consisting of organic poly(methyl methacrylate) (PMMA) and inorganic montmorillonite (MMT) clay platelets were prepared successfully by the effective dispersion of nanolayers of the MMT clay in the PMMA framework through both in situ emulsion polymerization and solution dispersion. The as‐prepared PCN materials obtained with both approaches were subsequently characterized with wide‐angle powder X‐ray diffraction and transmission electron microscopy. For a comparison of the anticorrosion performance, a PCN material (e.g., 3 wt % clay loading) prepared by in situ emulsion polymerization, showing better dispersion of the clay platelets in the polymer matrix, exhibited better corrosion protection in the form of a coating on a cold‐rolled steel coupon than that prepared by solution dispersion, which showed a poor dispersion of the clay nanolayers according to a series of electrochemical corrosion measurements. Comparative studies of the optical clarity, molecular barrier properties, and thermal stability of samples prepared in both ways, as membranes and fine powders, were also performed with ultraviolet–visible transmission spectroscopy, molecular permeability analysis, thermogravimetric analysis, and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1936–1946, 2004     

Vinyl ester/clay based nanocomposites: a complementary study of vinyl ester polymerization by hyphenated rheo‐Fourier transform infrared and separate rheology/Fourier transform infrared measurements

This work is focused on the complementary information obtained from advanced in situ Fourier transform infrared (FTIR) spectroscopy and rheological measurements to correlate the structural changes with rheological properties upon polymerization of different organically modified montmorillonite clay/vinyl ester composites prepared by in situ polymerization. The microstructure and morphology of the nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The effect exerted by the presence of organic clay on the polymerization reaction of a vinyl ester based polymer matrix was evaluated. In situ and ex situ rheo‐FTIR measurements were compared to demonstrate the accuracy of this technique. © 2013 Society of Chemical Industry     

Mechanical,thermal conductive,and dielectric properties of fluoroelastomer/reduced graphene oxide composites in situ prepared by solvent thermal reduction

Fluoroelastomer (FKM)/reduced graphene oxide (rGO) composites are in situ prepared by solvent thermal reduction method in N,N‐dimethylformamide (DMF) solution. The reduction of graphene oxide (GO) is characterized by X‐Ray photoelectron (XPS), ultraviolet–visible (UV–vis), and Fourier transform infrared (FTIR) spectra. GO and rGO are both efficient fillers to improve the mechanical properties of FKM. The dispersibility of rGO is improved after solvent thermal reduction which is confirmed by scanning electron micrograph (SEM) and X‐ray diffraction (XRD). The homogenous suspension of FKM/rGO composites in DMF can stay stable for more than a month. The dielectric permittivity of FKM/rGO (5 phr) is 26.4 at the frequency of 10⁻¹ Hz, higher than the pure FKM (8.1). The thermal conductivity of rGO/FKM composites increases. POLYM. COMPOS., 35:1779–1785, 2014. © 2013 Society of Plastics Engineers