Achieving High‐Performance Nondoped OLEDs with Extremely Small Efficiency Roll‐Off by Combining Aggregation‐Induced Emission and Thermally Activated Delayed Fluorescence

Luminescent materials with thermally activated delayed fluorescence (TADF) can harvest singlet and triplet excitons to afford high electroluminescence (EL) efficiencies for organic light‐emitting diodes (OLEDs). However, TADF emitters generally have to be dispersed into host matrices to suppress emission quenching and/or exciton annihilation, and most doped OLEDs of TADF emitters encounter a thorny problem of swift efficiency roll‐off as luminance increases. To address this issue, in this study, a new tailor‐made luminogen (dibenzothiophene‐benzoyl‐9,9‐dimethyl‐9,10‐dihydroacridine, DBT‐BZ‐DMAC) with an unsymmetrical structure is synthesized and investigated by crystallography, theoretical calculation, spectroscopies, etc. It shows aggregation‐induced emission, prominent TADF, and interesting mechanoluminescence property. Doped OLEDs of DBT‐BZ‐DMAC show high peak current and external quantum efficiencies of up to 51.7 cd A^?1 and 17.9%, respectively, but the efficiency roll‐off is large at high luminance. High‐performance nondoped OLED is also achieved with neat film of DBT‐BZ‐DMAC, providing excellent maxima EL efficiencies of 43.3 cd A^?1 and 14.2%, negligible current efficiency roll‐off of 0.46%, and external quantum efficiency roll‐off approaching null from peak values to those at 1000 cd m^?2. To the best of the authors' knowledge, this is one of the most efficient nondoped TADF OLEDs with small efficiency roll‐off reported so far.     

High‐Performance Hybrid White Organic Light‐Emitting Diodes with Superior Efficiency/Color Rendering Index/Color Stability and Low Efficiency Roll‐Off Based on a Blue Thermally Activated Delayed Fluorescent Emitter

Thermally activated delayed fluorescence (TADF)‐based white organic light‐emitting diodes (WOLEDs) are highly attractive because the TADF emitters provide a promising alternative route to harvest triplet excitons. One of the major challenges is to achieve superior efficiency/color rendering index/color stability and low efficiency roll‐off simultaneously. In this paper, high‐performance hybrid WOLEDs are demonstrated by employing an efficient blue TADF emitter combined with red and green phosphorescent emitters. The resulting WOLED shows the maximum external quantum efficiency, current efficiency, and power efficiency of 23.0%, 51.0 cd A^?1, and 51.7 lm W^?1, respectively. Moreover, the device exhibits extremely stable electroluminescence spectra with a high color rendering index of 89 and Commission Internationale de L'Eclairage coordinates of (0.438, 0.438) at the practical brightness of 1000 cd m^?2. The achievement of these excellent performances is systematically investigated by versatile experimental and theoretical evidences, from which it is concluded that the utilization of a blue‐green‐red cascade energy transfer structure and the precise manipulation of charges and excitons are the key points. It can be anticipated that this work might be a starting point for further research towards high‐performance hybrid WOLEDs.     

Engineering Efficiency Roll‐Off in Organic Light‐Emitting Devices

Previous studies have identified triplet‐triplet annihilation and triplet‐polaron quenching as the exciton density‐dependent mechanisms which give rise to the efficiency roll‐off observed in phosphorescent organic light‐emitting devices (OLEDs). In this work, these quenching processes are independently probed, and the impact of the exciton recombination zone width on the severity of quenching in various OLED architectures is examined directly. It is found that in devices employing a graded‐emissive layer (G‐EML) architecture the efficiency roll‐off is due to both triplet‐triplet annihilation and triplet‐polaron quenching, while in devices which employ a conventional double‐emissive layer (D‐EML) architecture, the roll‐off is dominated by triplet‐triplet annihilation. Overall, the efficiency roll‐off in G‐EML devices is found to be much less severe than in the D‐EML device. This result is well accounted for by the larger exciton recombination zone measured in G‐EML devices, which serves to reduce exciton density‐driven loss pathways at high excitation levels. Indeed, a predictive model of the device efficiency based on the quantitatively measured quenching parameters shows the role a large exciton recombination zone plays in mitigating the roll‐off.     

High‐Efficiency Near‐Infrared Fluorescent Organic Light‐Emitting Diodes with Small Efficiency Roll‐Off: A Combined Design from Emitters to Devices

The simultaneous realization of high quantum yield and exciton utilizing efficiency (η_r) is still a formidable challenge in near‐infrared (NIR) fluorescent organic light‐emitting diodes (FOLEDs). Here, to achieve a high quantum yield, a novel NIR dye, 4,9‐bis(4‐(diphenylamino)phenyl)‐naphtho[2,3‐c ][1,2,5]selenadiazole, is designed and synthesized with a large highest occupied molecular orbital/lowest unoccupied molecular orbital overlap and an aggregation‐induced emission property, which demonstrates a high photoluminescence quantum yield of 27% at 743 nm in toluene and 29% at 723 nm in a blend film. For a high η_r, an orange‐emitting thermally activated delayed fluorescent material, 1,2‐bis(9,9‐dimethyl‐9,10‐dihydroacridine)‐4,5‐dicyanobenzene, is chosen as the sensitizing host to harvest triplet excitons in devices. The optimized devices achieve a good η_r of 45.7% and a high external quantum efficiency up to 2.65% at 730 nm, with a very small efficiency roll‐off of 2.41% at 200 mA cm^?2, which are among the most efficient values for NIR‐FOLEDs over 700 nm. The effective utilization of triplet excitons via the thermally activated delayed fluorescence‐sensitizing host will pave a way to realize high‐efficiency NIR‐FOLEDs with small efficiency roll‐off.     

Flexible all fluorescence white organic light emitting device with over 22% EQE by stepped reverse intersystem crossing channels based on ternary exciplex

Improvement of the utilization of triplet excitons for thermally activated delayed fluorescence (TADF) emitter-based white organic light emitting devices (WOLEDs) is a key scientific challenge. In this study, a new strategy with stepped reverse intersystem crossing (RISC) channels induced by new ternary exciplex was proposed to enhance up-conversion of non-radiative triplet excitons. A flexible TADF WOLED with external quantum efficiency (EQE) of 22.7% and a power efficiency of 62.5 lmW⁻¹ was demonstrated. At 1000 cdm⁻², the EQE still remained at 21.4%, showing low efficiency roll-off of 5.7%. It is attributed to the reduced non-radiative triplet excitons stack, which suppressed the triplet–triplet quenching. Moreover, the new ternary exciplex-based WOLED system mCP: DMAC-DPS:PO-T2T:4CZPNPh exhibited rate constant of RISC process of 2.5 × 10⁶ s⁻¹, and about 2 times photoluminescence quantum yield over binary exciplex. The high efficiency effectively demonstrated that the proposed multiple triplet excitons capture process is an effective strategy to improve the utilization of triplet excitons. Moreover, the novel strategy can be a promising approach for the further development of WOLED.     

Exciplex‐Forming Co‐host for Organic Light‐Emitting Diodes with Ultimate Efficiency

Phosphorescent organic light‐emitting diodes (OLEDs) with ultimate efficiency in terms of the external quantum efficiency (EQE), driving voltage, and efficiency roll‐off are reported, making use of an exciplex‐forming co‐host. This exciplex‐forming co‐host system enables efficient singlet and triplet energy transfers from the host exciplex to the phosphorescent dopant because the singlet and triplet energies of the exciplex are almost identical. In addition, the system has low probability of direct trapping of charges at the dopant molecules and no charge‐injection barrier from the charge‐transport layers to the emitting layer. By combining all these factors, the OLEDs achieve a low turn‐on voltage of 2.4 V, a very high EQE of 29.1% and a very high power efficiency of 124 lm W^?1. In addition, the OLEDs achieve an extremely low efficiency roll‐off. The EQE of the optimized OLED is maintained at more than 27.8%, up to 10 000 cd m^?2.     

Thermally Activated Delayed Fluorescence Conjugated Polymers with Backbone‐Donor/Pendant‐Acceptor Architecture for Nondoped OLEDs with High External Quantum Efficiency and Low Roll‐Off

Most thermally activated delayed fluorescence (TADF) emitters have to be doped in the host for fabricating efficient organic light‐emitting diodes (OLEDs) and always suffer from quick efficiency roll‐off at high brightness, which severely affect their commercial application in display and lighting fields. In the work, a series of the polymers are synthesized by copolymerization of two carbazole monomers and one acridine derivative monomer containing benzophenone acceptor group. The obtained polymers therefore possess a conjugated backbone with carbazole/acridine moieties and benzophenone pendant to form the twisted donor/acceptor structure. Consequently, the TADF features inherited from the acridine derivative are maintained and improved by managing the content of acridine derivative monomer in the polymers. Solution‐processed OLEDs obtained from using neat polymer films exhibit comparable performance with organic TADF small molecules, achieving a maximum external quantum efficiency (EQE) of 18.1% and a very slow roll‐off with EQE of 17.8% at the luminance of 1000 cd m⁻².     

Efficiency Roll‐Off in Blue Emitting Phosphorescent Organic Light Emitting Diodes with Carbazole Host Materials

The efficiency roll‐off in blue phosphorescent organic light emitting diodes (OLEDs) using different carbazole compounds as the host is systematically studied. While there is no significant difference in device efficiency, OLEDs using ter‐carbazole as the host show a reduction in efficiency roll‐off at high luminance. Data from transient photoluminescence and electroluminescence measurements show that the lower triplet–triplet annihilation (TTA) and triplet–polaron quenching (TPQ) rates in devices with the ter‐carbazole host compared with other carbazole hosts are the reasons for this reduced efficiency roll‐off. It is also found that the host materials with low glass transition temperatures are more susceptible to the efficiency roll‐off problem.     

Low Roll‐Off and High Efficiency Orange Organic Light Emitting Diodes with Controlled Co‐Doping of Green and Red Phosphorescent Dopants in an Exciplex Forming Co‐Host

An exciplex forming co‐host is introduced in order to fabricate orange organic light‐emitting diodes (OLEDs) with high efficiency, low driving voltage and an extremely low efficiency roll‐off, by the co‐doping of green and red emitting phosphorescence dyes in the host. The orange OLEDs achieves a low turn‐on voltage of 2.4 V, which is equivalent to the triplet energy gap of the phosphorescent‐green emitting dopant, and a very high external quantum efficiency (EQE) of 25.0%. Moreover, the OLEDs show low efficiency roll‐off with an EQE of over 21% at 10 000 cdm^?2. The device displays a very good orange color (CIE of (0.501, 0.478) at 1000 cdm^?2) with very little color shift with increasing luminance. The transient electroluminescence of the OLEDs indicate that both energy transfer and direct charge trapping takes place in the devices.     

Exciton–Exciton Annihilation in Thermally Activated Delayed Fluorescence Emitter

Recent studies have demonstrated that in thermally activated delayed fluorescence (TADF) materials, efficient reverse intersystem crossing occurs from nonradiative triplet exited states to radiative singlet excited states due to a small singlet–triplet energy gap. This reverse intersystem crossing significantly influences exciton annihilation processes and external quantum efficiency roll‐off in TADF based organic light‐emitting diodes (OLEDs). In this work, a comprehensive exciton quenching model is developed for a TADF system to determine singlet–singlet, singlet–triplet, and triplet–triplet annihilation rate constants. A well‐known TADF molecule, 3‐(9,9‐dimethylacridin‐10(9H)‐yl)‐9H‐xanthen‐9‐one (ACRXTN), is studied under intensity‐dependent optical and electrical pulse excitation. The model shows singlet–singlet annihilation dominates under optically excited decays, whereas singlet–triplet annihilation and triplet–triplet annihilation have strong contribution in electroluminescence decays under electrical pulse excitation. Furthermore, the efficiency roll‐off characteristics of ACRXTN OLEDs at steady state is investigated through simulation. Finally, singlet and triplet diffusion length are calculated from annihilation rate constants.     

High Performance p‐ and n‐Type Light‐Emitting Field‐Effect Transistors Employing Thermally Activated Delayed Fluorescence

Light‐emitting field‐effect transistors (LEFETs) are an emerging type of devices that combine light‐emitting properties with logical switching function. One of the factors limiting their efficiency stems from the spin statistics of electrically generated excitons. Only 25% of them, short lived singlet states, are capable of light emission, with the other 75% being long lived triplet states that are wasted as heat due to spin‐forbidden processes. Traditionally, the way to overcome this limitation is to use phosphorescent materials as additional emission channel harnessing the triplet excitons. Here, an alternative strategy for triplet usage in LEFETs in the form of thermally activated delayed fluorescence (TADF) is presented. Devices employing a TADF capable material, 4CzIPN (2,4,5,6‐tetra[9H‐carbazol‐9‐yl]isophthalonitrile), in both n‐type and p‐type configurations are shown. They manifest excellent electrical characteristics, consistent brightness in the range of 100–1,000 cd m^‐2 and external quantum efficiency (EQE) of up to 0.1%, which is comparable to the equivalent organic light‐emitting diode (OLED) based on the same materials. Simulation identifies the poor light out‐coupling as the main reason for lower than expected EQEs. Transmission measurements show it can be partially alleviated using a more transparent top contact, however more structural optimization is needed to tap the full potential of the device.     

Exciton and Polaron Quenching in Doping‐Free Phosphorescent Organic Light‐Emitting Diodes from a Pt(II)‐Based Fast Phosphor

By introducing a neat Pt(II)‐based phosphor with a remarkably short decay lifetime, a simplified doping‐free phosphorescent organic light‐emitting diode (OLED) with a forward viewing external quantum efficiency (EQE) and power efficiency of 20.3 ± 0.5% and 63.0 ± 0.4 lm W^?1, respectively, is demonstrated. A quantitative analysis of how triplet‐triplet annihilation (TTA) and triplet‐polaron annihilation (TPA) affect the device EQE roll‐off at high current densities is performed. The contributions from loss of charge balance associated with charge leakage and field‐induced exciton dissociation are found negligible. The rate constants k_TTA and k_TPA are determined by time‐resolved photoluminescence experiments of a thin film and an electrically‐driven unipolar device, respectively. Using the parameters extracted experimentally, the EQE is modeled versus electric current characteristics of the OLEDs by taking both TTA and TPA into account. Based on this model, the impacts of the emitter lifetime, quenching rate constants, and exciton formation zone upon device efficiency are analyzed. It is found that the short lifetime of the neat emitter is key for the reduction of triplet quenching.     

Thermally Activated Delayed Fluorescence Material as Host with Novel Spiro‐Based Skeleton for High Power Efficiency and Low Roll‐Off Blue and White Phosphorescent Devices

Efficiency roll‐off in blue organic light‐emitting diodes especially at high brightness still remains a vital issue for which the excitons density‐dependent mechanism of host materials takes most responsibility. Additionally, the efficiency roll‐off leads to high power consumption and reduces the operating lifetime because higher driving voltage and current are required. Here, by subtly modifying the triphenylamine to oxygen‐bridged quasi‐planar structure, a novel thermally activated delayed fluorescence type blue host Tri‐o‐2PO is successfully developed. Efficiency roll‐off based on Tri‐o‐2PO is ultralow with external quantum efficiency (EQE) just dropping by around 2% in the high luminance range from 1000 cd m^?2 to 10 000 cd m^?2. As expected, low turn‐on voltage (≈2.9 V) of device is also achieved, which is close to the theory limit value (≈2.62 V). Super‐high power efficiency (≈60 lm W^?1) and EQE (>22%) are also achieved when utilizing Tri‐o‐2PO as host. Furthermore, two‐color warm‐white light with CIE of (0.45, 0.43) and correlated color temperature of 2921 K is also fabricated and a champion EQE of 21% is delivered. These excellent performances prove the strategy of bridging the triphenylamine to reduce ΔE_st is validated and suggest the great potential of this novel skeleton.     

Management of Host–Guest Triplet Exciton Distribution for Stable,High-Efficiency,Low Roll-Off Solution-Processed Blue Organic Light-Emitting Diodes by Employing Triplet-Energy-Mediated Hosts

High-quality hosts are indispensable for simultaneously realizing stable, high efficiency, and low roll-off blue solution-processed organic light-emitting diodes (OLEDs). Herein, three solution processable bipolar hosts with successively reduced triplet energies approaching the T₁ state of thermally activated delayed fluorescence (TADF) emitter are developed and evaluated for high-performance blue OLED devices. The smaller T₁ energy gap between host and guest allows the quenching of long-lived triplet excitons to reduce exciton concentration inside the device, and thus suppresses singlet-triplet and triplet-triplet annihilations. Triplet-energy-mediated hosts with high enough T₁ and better charge balance in device facilitate high exciton utilization efficiency and uniform triplet exciton distribution among host and TADF guest. Benefited from these synergetic factors, a high maximum external quantum efficiency (EQE_max) of 20.8%, long operational lifetime (T₅₀ of 398.3 h @ 500 cd m⁻²), and negligible efficiency roll-off (EQE of 20.1% @ 1000 cd m⁻²) are achieved for bluish-green TADF OLEDs. Additionally introducing a narrowband emission multiple-resonance TADF material as terminal emitter to accelerate exciton dynamic and improve exciton utilization, a higher EQE_max of 23.1%, suppressed roll-off and extended lifetime of 456.3 h are achieved for the sky-blue sensitized OLEDs at the same brightness.     

All‐Fluorescence White Organic Light‐Emitting Diodes Exceeding 20% EQEs by Rational Manipulation of Singlet and Triplet Excitons

White organic light‐emitting diodes (WOLEDs) composed of conventional fluorophores possess color purity, low efficiency roll‐off, and rare metal absence, but suffer from theoretical limits due to the lack of triplet utilization. Due to the different diffusion distance for singlets and triplets, multiple Förster resonance energy transfer (FRET) channels can be adequately built up. Herein, besides the complementary component, a blue fluorescence layer, hosted by pure hydrocarbon material SF4‐TPE, is put forward as the spatial exciton manipulating layer to rationally allocate singlets and triplets to the corresponding channels. Hence, singlets are captured by the blue fluorophore, diffused triplets subsequently undergo energy resonance between the blue fluorophore and green assistant, and up‐conversion effect for eventual emission from the yellow fluorophore. Owing to the utilization of singlets and triplets, all‐fluorescence WOLEDs exhibit high efficiency exceeding 20%, with slight efficiency roll‐off even under high luminance of 5000 cd cm^?2. Moreover, CIE coordinates can be surrounding and precisely inside the American National Standard Institute (ANSI) quadrangles, as well as outstanding color stability (ΔCIE‐(x, y) within (0.001, 0.012)) from 300 to 13000 cd cm^?2.     

Novel Strategy to Develop Exciplex Emitters for High‐Performance OLEDs by Employing Thermally Activated Delayed Fluorescence Materials

To develop high‐performance thermally activated delayed fluorescence (TADF) exciplex emitters, a novel strategy of introducing a single‐molecule TADF emitter as one of the constituting materials has been presented. Such a new type of exciplex TADF emitter will have two reverse intersystem crossing (RISC) routes on both the pristine TADF molecules and the exciplex emitters, benefiting the utilization of triplet excitons. Based on a newly designed and synthesized single‐molecule TADF emitter MAC, a highly efficient exciplex emitter MAC:PO‐T2T has been obtained. The device based on MAC:PO‐T2T with a weight ratio of 7:3 exhibits a low turn‐on voltage of 2.4 V, high maximum efficiency of 52.1 cd A^?1 (current efficiency), 45.5 lm W^?1 (power efficiency), and 17.8% (external quantum efficiency, EQE), as well as a high EQE of 12.3% at a luminance of 1000 cd m^?2. The device shows the best performance among reported organic light‐emitting devices based on exciplex emitters. Such high‐efficiency and low‐efficiency roll‐off should be ascribed to the additional reverse intersystem crossing process on the MAC molecules, showing the advantages of the strategy described in this study.     

Versatile,Benzimidazole/Amine‐Based Ambipolar Compounds for Electroluminescent Applications: Single‐Layer,Blue, Fluorescent OLEDs,Hosts for Single‐Layer,Phosphorescent OLEDs

A series of compounds containing arylamine and 1,2‐diphenyl‐1H‐benz[d]imidazole moieties are developed as ambipolar, blue‐emitting materials with tunable blue‐emitting wavelengths, tunable ambipolar carrier‐transport properties and tunable triplet energy gaps. These compounds possess several novel properties: (1) they emit in the blue region with high quantum yields; (2) they have high morphological stability and thermal stability; (3) they are capable of ambipolar carrier transport; (4) they possess tunable triplet energy gaps, suitable as hosts for yellow‐orange to green phosphors. The electron and hole mobilities of these compounds lie in the range of 0.68–144 × 10^?6 and 0.34–147 × 10^?6 cm² V^?1 s^?1, respectively. High‐performance, single‐layer, blue‐emitting, fluorescent organic light‐emitting diodes (OLEDs) are achieved with these ambipolar materials. High‐performance, single‐layer, phosphorescent OLEDs with yellow‐orange to green emission are also been demonstrated using these ambipolar materials, which have different triplet energy gaps as the host for yellow‐orange‐emitting to green‐emitting iridium complexes. When these ambipolar, blue‐emitting materials are lightly doped with a yellow‐orange‐emitting iridium complex, white organic light‐emitting diodes (WOLEDs) can be achieved, as well by the use of the incomplete energy transfer between the host and the dopant.     

Towards High Efficiency and Low Roll‐Off Orange Electrophosphorescent Devices by Fine Tuning Singlet and Triplet Energies of Bipolar Hosts Based on Indolocarbazole/1, 3, 5‐Triazine Hybrids

Orange‐emitting phosphorescent organic light‐emitting diodes (PHOLEDs) are drawing more and more attention; however, high‐performance hosts designed for orange PHOLEDs are rare. Here, four indolocarbazole/1, 3, 5‐triazine hybrids are synthesized to optimize the singlet and triplet energies, as well as transporting properties, for ideal orange PHOLEDs. By introducing moieties with different electronegativity, a graded reduction of the singlet and triplet energies is achieved, resulting in minimum injection barrier and minimum energy loss. Besides, the charge transporting abilities are also tuned to be balanced on the basis of the bipolar features of those materials. The optimized orange PHOLED shows a maximum external quantum efficiency (EQE) of 24.5% and a power efficiency of 64 lm W^–1, both of which are among the best values for orange PHOLEDs. What is more, the efficiency roll‐off is extremely small, with an EQE of 24.4% at 1000 cd m^–2 and 23.8% at 10 000 cd m^–2, respectively, which is the lowest efficiency roll‐off for orange PHOLEDs to date, resulting in the highest EQE for orange PHOLEDs when the luminance is above 1000 cd m^–2. Besides the balanced charges, the small roll‐off is also attributed to the wide recombination zone resulting from the bipolar features of the hosts.     

Correlation Between Triplet–Triplet Annihilation and Electroluminescence Efficiency in Doped Fluorescent Organic Light‐Emitting Devices

Triplet–triplet annihilation (TTA) is studied in a wide range of fluorescent host:guest emitter systems used in organic light‐emitting devices (OLEDs). Strong TTA is observed in host:guest systems in which the dopant has a limited charge‐trapping capability. On the other hand, systems in which the dopant can efficiently trap charges show insignificant TTA, an effect that is due, in part, to the efficient quenching of triplet excitons by the trapped charges. Fluorescent host:guest systems with the strongest TTA are found to give the highest OLED electroluminescence efficiency, a phenomenon attributed to the role of TTA in converting triplet excitons into additional singlet excitons, thus appreciably contributing to the light output of OLEDs. The results shed light on and give direct evidence for the phenomena behind the recently reported very high efficiencies attainable in fluorescent host:guest OLEDs with quantum efficiencies exceeding the classical 25% theoretical limit.     

An Indolocarbazole‐Based Thermally Activated Delayed Fluorescence Host for Solution‐Processed Phosphorescent Tandem Organic Light‐Emitting Devices Exhibiting Extremely Small Efficiency Roll‐Off

The study reports the development of a solution‐processed phosphorescent tandem organic light‐emitting device (OLED) exhibiting extremely small efficiency roll‐off. The OLED comprises two light‐emitting units (LEUs) connected by an interconnecting unit and employs a thermally activated delayed fluorescence host material. One of the most difficult tasks in the fabrication of OLEDs is to form a multilayer structure without dissolving the underlayer during the coating of the upper layer. The developed host materials exhibit high tolerance to methanol. The upper‐layer adjacent to the light‐emitting layer consists of ZnO nanoparticles, which could be dispersed in methanol by improving the preparation method. This results in the successful fabrication of a solution‐processed phosphorescent tandem OLED comprising two LEUs. The maximum external quantum efficiency (EQE) of the tandem device is 22.8%, and the EQE is 21.9% even at a high luminance of 10 000 cd m^?2. The suppression of efficiency roll‐off is among the best of those previously reported. Moreover, the operational stability of the tandem device is much higher compared with single‐LEU devices.