Theophylline‐loaded pectin‐based hydrogels. I. Effect of medium pH and preparation conditions on drug release profile

In this study, a series of theophylline‐loaded calcium pectin gel films were prepared in three different Ca⁺² concentrations with three different methods for wound dressing applications. Drug release performance of the films were investigated in four different medium pH in order to mimic wound healing pH conditions. Hydrogel films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy and atomic force microscopy. Their absorbency (fluid handling), swelling behavior, dehydration rate, dispersion characteristic, dressing pH determination, water vapor permeability, oxygen permeability, surface contact angle, flexibility, Shore A hardness, mean mass per unit area and thickness were determined. The effect of the hydrogels on wound healing was evaluated with an in vitro wound healing assay. After evaluating all data, we suggested that the hydrogel film prepared with swelling method using 7% or 10% crosslinker and dried at 26 °C is more suitable for controlled drug release process. We showed that between pH 3.25 and 7.12 the form of the hydrogel did not change, and drug release was continuous. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46731.     

Theophylline-loaded pectin-based hydrogels. II. Effect of concentration of initial pectin solution,crosslinker type and cation concentration of external solution on drug release profile

A series of drug-loaded pectin hydrogels were prepared by mixing method in two ion types, Ca⁺² or Zn⁺², for wound dressing applications and their drug release performances were investigated at pH 6.4 in four different calcium ion concentrations of external solution. Pectin hydrogels were synthesized in three different concentrations of initial pectin solution and theophylline was used as a model drug. Fourier transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy were used for hydrogel characterization. Additionally, fluid handling capacity, swelling behavior, dehydration rate, dispersion characteristic, dressing pH determination, water vapor permeability, oxygen permeability, surface contact angle, flexibility, mass per unit area, and thickness were determined for selected hydrogels. One of the most valuable contributions of our study is that the concentration of initial pectin solution and calcium ion concentration of external solution are very important parameters to obtain an effective drug release. After evaluating all data, we have shown that flexible and transparent pectin-based wound dressings can be synthesized as a controlled drug release system. Zinc-containing hydrogel was antibacterial against Staphylococcus aureus and Escherichia coli but not suitable for cell migration. On the other hand, calcium-based hydrogel was nontoxic on the fibroblast cells and it had no negative effect on cell migration. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48155.     

Development of microbial protective Kolliphor‐based nanocomposite hydrogels

In this scientific work, a novel class of antimicrobial nanocomposite hydrogels were designed and synthesized by chemical and environmentally bioprocess using Kolliphor, acrylamide, and mint leafs in order to achieve antiseptic property for wound applications. In the bioprocess approach, silver nitrate and gold chloride were nucleated with mint leafs in order to obtain effective free individual nano‐inorganic compounds to provide superior antibacterial assets. The formations of dual inorganic nanoparticles were confirmed by transmission electron microscopy, which indicated the size of nanoparticles in the range of approximately 3 ± 2 nm and without agglomeration. The formations of biomaterials were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopic–energy dispersive spectrometric studies and their swelling properties were determined. Furthermore, the pure hydrogel and the dual inorganic nanocomposite hydrogels developed were tested for antibacterial activities. When compared with the neat hydrogel, the nanocomposite hydrogels significantly improved their anti‐bacterial activities on Bacillus bacterium. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42781.     

Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle

This article deals with the synthesis of hybrid nanocomposite hydrogels through the combination of cellulose (C), polypropylene oxide/poly ethylene oxide (PPO/PEO), and silver nanoparticles (AgNPs) by in situ polymerization technique for the in vitro release of ornidazole drugs. The structure of the resulted materials is identified using SEM, XRD, FTIR, XPS, and TGA spectroscopic techniques. The resulting structure, morphology, thermo responsive property, water retention, and swelling behavior of hydrogels are investigated. The rheological measurement is studied to establish the enhancement of the viscoelasticity and stiffness of hydrogels. The antibacterial activity of the biodegradable silver hybrid nanocomposite hydrogel is investigated by inhibition zone method against gram positive and negative bacteria. Maximum drug release of 96.4% is recorded at 7.4 pH in 5 h. The biocompatibility and cytotoxicity of the hybrid nanocomposite hydrogel are verified using mouse fibroblast cell line L-929 (ATCC CCL-1) cells for their possible use as controlled drug delivery vehicles. The nontoxic nature makes the materials more biocompatible and suitable to apply in the biological systems. Therefore, nontoxic and biocompatible natures of present materials with improved thermal and rheological properties support for their possible uses as drug delivery vehicles.     

Development of pH-sensitive and antibacterial gelatin/citric acid/Ag nanocomposite hydrogels with potential for biomedical applications

This work aimed to prepare pH-sensitive and antibacterial drug releasing systems through a completely green route. To achieve this, the gelatin natural biopolymer was crosslinked with citric acid in the presence of Ag nanoparticles (NPs). Interestingly, Ag NPs formation and gelatin crosslinking were simultaneously occurred during annealing of samples without need for any toxic chemicals, which were confirmed by FTIR, UV-vis spectra, SEM and TEM observations. In addition, potential of the citric acid crosslinked-gelatin/Ag nanocomposite hydrogels was successfully explored for drug delivery applications using cefixime as a model drug. It was found that these hydrogels have pH-dependent swelling and drug release behavior with higher drug release at pH 7.4 compared to pH 1.2. Also, an antibacterial effect against the E. coli and S. aureus microorganisms was achieved by incorporation of Ag NPs into hydrogels. These hydrogels can be considered as stimuli responsive materials for oral drug delivery and wound dressing applications.     

Preparation and characterization of PVA/PVP/glycerin/antibacterial agent hydrogels using <Emphasis Type="Italic">γ</Emphasis>-irradiation followed by freeze-thawing

Hydrogels for wound dressings from a mixture of poly(vinyl alcohol) (PVA), poly(N-vinylpyrrolidone) (PVP), glycerin and an antibacterial agent were obtained by a γ-irradiation combined with freeze-thawing. The physical properties such as the gelation and swelling degree of the hydrogels were examined. When the PVP/PVA ratio was 6: 4 (wt%) and prepared by combined irradiation and freeze-thawing, it showed an excellent swelling capacity (>1,200%). The antibacterial effect of the hydrogels containing the antibacterial agents was observed to be effective as the concentration of antibacterial agents increased. The results demonstrated that hydrogel in a proper blending ratio could be used as a wound dressing that can accelerate wound healing with an antibacterial effect.     

Bioactive Carboxymethyl Starch-Based Hydrogels Decorated with CuO Nanoparticles: Antioxidant and Antimicrobial Properties and Accelerated Wound Healing In Vivo

In this study, nanocomposite hydrogels composed of sodium carboxymethylated starch (CMS)-containing CuO nanoparticles (CMS@CuO) were synthesized and used as experimental wound healing materials. The hydrogels were fabricated by a solution-casting technique using citric acid as a crosslinking agent. They were characterized by Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and thermogravimetric analysis (TGA) to evaluate their physicochemical properties. In addition, swelling, antibacterial activities, antioxidant activities, cytotoxicity, and in vivo wound healing were investigated to evaluate the wound healing potential of the CMS@CuO nanocomposite hydrogels. Growth inhibition of the Gram-positive and Gram-negative pathogens, antioxidant activity, and swelling were observed in the CMS@CuO nanocomposite hydrogels containing 2 wt.% and 4 wt.% CuO nanoparticles. The hydrogel containing 2 wt.% CuO nanoparticles displayed low toxicity to human fibroblasts and exhibited good biocompatibility. Wounds created in rats and treated with the CMS@2%CuO nanocomposite hydrogel healed within 13 days, whereas wounds were still present when treated for the same time-period with CMS only. The impact of antibacterial and antioxidant activities on accelerating wound healing could be ascribed to the antibacterial and antioxidant activities of the nanocomposite hydrogel. Incorporation of CuO nanoparticles in the hydrogel improved its antibacterial properties, antioxidant activity, and degree of swelling. The present nanocomposite hydrogel has the potential to be used clinically as a novel wound healing material.     

Synthesis,characterization and swelling behavior of chitosan‐sucrose as a novel full‐polysaccharide superabsorbent hydrogel

A novel full‐polysaccharide hydrogel was prepared by crosslinking of chitosan with periodate‐oxidized sucrose. A tetraaldehyde molecule is synthesized via periodate oxidation of sucrose and then applied as a crosslinking agent to form a new hydrogel network. A mechanism for the superabsorbent hydrogel formation via reductive N‐alkylation was also suggested. The structure of the hydrogel was confirmed by FTIR spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). It is shown that crosslinking of chitosan can improve its thermal stability. The effects of crosslinker concentration, pH, and inorganic salt on the swelling behavior of the hydrogel were studied. The results indicate that the hydrogel has good pH sensitivity and pH reversible response. The smart hydrogels may have potential applications in the controlled delivery of bioactive agents and for wound‐dressing application © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Hydrogels containing silver nanoparticles for burn wounds show antimicrobial activity without cytotoxicity

This research introduces a novel dressing for burn wounds, containing silver nanoparticles in hydrogels for infected burn care. The 2‐acrylamido‐2‐methylpropane sulfonic acid sodium salt hydrogels containing silver nanoparticles have been prepared via ultraviolet radiation. The formation of silver nanoparticles was monitored by surface plasmon bands and transmission electron microscopy. The concentration of silver nitrate loaded in the solutions slightly affected the physical properties and mechanical properties of the neat hydrogel. An indirect cytotoxicity study found that none of the hydrogels were toxic to tested cell lines. The measurement of cumulative release of silver indicated that 70%–82% of silver was released within 72 hr. The antibacterial activities of the hydrogels against common burn pathogens were studied and the results showed that 5 mM silver hydrogel had the greatest inhibitory activity. The results support its use as a potential burn wound dressing. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40215.     

Temperature/pH/magnetic triple‐sensitive nanogel–hydrogel nanocomposite for release of anticancer drug

Hydrogels, nanogels and nanocomposites show increasing potential for application in drug delivery systems due to their good chemical and physical properties. Therefore, we were encouraged to combine them to produce a new compound with unique properties for a long‐term drug release system. In this regard, the design and application of a nanocomposite hydrogel containing entrapped nanogel for drug delivery are demonstrated. To this aim, we first prepared an iron oxide nanocomposite nanogel based on poly(N‐isopropylacrylamide)‐co‐((2‐dimethylaminoethyl) methacrylate) (PNIPAM‐co‐PDMA) grafted onto sodium alginate (NaAlg) as a biocompatible polymer and iron oxide nanoparticles (ION) as nanometric base (PND/ION‐NG). This was then added into a solution of PDMA grafted onto NaAlg. Through dropwise addition of mixed aqueous solution of iron salts into the prepared polymeric solution, a novel hydrogel nanocomposite with excellent pH, thermal and magnetic responsivity was fabricated. The synthesized samples were fully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy with energy‐dispersive X‐ray analysis, vibrating sample magnetometry and atomic force microscopy. A mechanism for the formation of PNIPAM‐co‐PDMA/NaAlg‐ION nanogel–PDMA/NaAlg‐ION hydrogel and PND/ION nanogel is suggested. Swelling capacity was measured at various temperatures (25 to 45 °C), pH values (from 2 to 11) and magnetic field and under load (0.3 psi) and the dependence of swelling properties of the nanogel–hydrogel nanocomposite on these factors was well demonstrated. The release rate of doxorubicin hydrochloride (DOX) as an anticancer drug was studied at different pH values and temperatures in the presence and absence of a magnetic field. The results showed that these factors have a high impact on drug release from this nanocomposite. The result showed that DOX release could be sustained for up to 12.5 days from these nanocomposite hydrogels, significantly longer than that achievable using the constituent hydrogel or nanogel alone (<1 day). The results indicated that the nanogel–hydrogel nanocomposite can serve as a novel nanocarrier for anticancer drug delivery. © 2019 Society of Chemical Industry     

The release of cefazolin from chitosan/polyvinyl alcohol/sepiolite nanocomposite hydrogel films

Films of chitosan/polyvinyl alcohol (PVA)/sepiolite nanocomposite were prepared by a simple and “green” route through solution mixing; followed by freezing–thawing cycles. The structures of nanocomposites were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetric analysis, X-ray diffractometry, and Fourier transform infrared spectroscopy. The SEM and TEM micrographs confirmed a needle-type dispersion of sepiolite nanoclay in the hydrogel nanocomposites. The effects of sepiolite and chitosan/PVA weight ratio on the swelling of nanocomposites were investigated. The water absorbency of nanocomposites was decreased by introducing sepiolite nanoclay. The nanocomposites with high content of chitosan showed high swelling capacity. The nanocomposite films showed pH-dependent swelling behavior with a maximum water absorbency under acidic pH. The cefazolin with a broad-spectrum activity toward gram-positive and gram-negative bacteria was loaded in hydrogels. The release of cefazolin from nanocomposites was evaluated at pH 7.4. The content of released drug was affected by both sepiolite amount and chitosan/PVA weight ratio. The nanocomposites films released more cefazolin than the neat hydrogel film. Cefazolin-loaded nanocomposites showed the antibacterial activity with a large zone of inhibition against gram-positive Bacillus cereus bacterium.     

Radiation synthesis and characterization of poly(vinyl alcohol)/poly(N-vinyl-2-pyrrolidone) based hydrogels containing silver nanoparticles

A series of PVA/PVP based hydrogels at different compositions were prepared by gamma irradiation. The gel fraction degree of swelling were investigated. Highly stable and uniformly distributed silver nanoparticles have been obtained onto hydrogel networks. The morphology and structure of (PVA/PVP) hydrogel and dispersion of the silver nanoparticles in the polymeric matrix were examined by scanning electron microscopy (SEM) and infrared spectroscopy (FT-IR), respectively. The formation of silver nanoparticles has been confirmed by ultraviolet visible (UV–vis) spectroscopy. A strong characteristic absorption peak was found to be around 420 nm for the silver nanoparticles in the hydrogel nanocomposite. The X-ray diffraction pattern confirmed the formation of silver nanoparticles with average particle size of 12 nm. The diameter distribution of silver nanoparticles was determined by dynamic light scattering DLS. Transmission electron microscope (TEM) showed almost spherical and uniform distribution of silver nanoparticles through the hydrogel network and the mean size of silver nanoparticles ranging is 23 nm. The good swelling properties and antibacterial of PVA/PVP-Ag hydrogel suggest that it can be a good candidate as wound dressing.     

Low-methoxyl pectin–zeolite hydrogels controlling drug release promote in vitro wound healing

This study presents the design of novel hydrogel films, based on low-methoxyl (LM) pectin and NaA- or ZnA-zeolite particles, to serve as wound dressing materials with controlled drug delivery properties. We studied the effects of the preparation method of hydrogels, the amounts of crosslinker, drug and zeolite, and the type of cation in zeolites on the drug release mechanisms from the hydrogels. Ionic strengths of both film and external medium dictated the drug release behavior of the films, while the other parameters also played essential roles. NaA-zeolite hydrogels prepared using membrane diffusion controlled system, could reach a drug release ratio of 86% within 5 h. The drug-free hydrogels displayed no cytotoxicity while supporting cell proliferation and migration. Our cost-effective LM pectin–zeolite hydrogels promise to be effective wound dressing materials with controlled drug delivery ability, transparency, good swelling properties, ability to hold fluids, good oxygen transmission rate, and biocompatibility. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47640.     

On the preparation and swelling properties of hydrogel nanocomposite based on Sodium alginate-g-Poly (acrylic acid-co-acrylamide)/Clinoptilolite and its application as slow release fertilizer

A novel slow release fertilizer hydrogel nanocomposite was prepared via free radical polymerization of sodium alginate, acrylic acid, acrylamide, and clinoptilolite using N, N?-methylene bisacrylamide as a crosslinker and ammonium persulfate as an initiator. Evidence of grafting and component interactions was obtained by a comparison of the Fourier transform infrared spectra of the initial substrates and hydrogel without clinoptilolite with that of the hydrogel nanocomposite containing clinoptilolite. The swelling behavior of both hydrogels in solutions of various pHs (2-12) and various saline solutions such as NaCl, KCl, CaCl₂ and FeCl₃ as well as swelling kinetics were investigated. Results showed that the swelling of hydrogels depends on the solution pH value. Also, the swelling of both hydrogels in all salt solutions is significantly lower than that of the values in distilled water. After those characterizations, the potential application was verified through sorption and fertilizer releasing from the hydrogel with and without clinoptilolite zeolite. The presence of the clinoptilolite zeolite in the hydrogel caused the system to liberate the nutrient in a more controlled manner than that with the neat hydrogel. The results of the fertilizer release of hydrogel nanocomposite were also encouraging in order to find applications in agriculture. Consequently, the good slow release fertilizer property as well as the good water adsorption capacity showed that this formulation is potentially viable to be used in agriculture as a nutrient carrier vehicle.     

Synthesis and controlled release of curcumin-β-cyclodextrin inclusion complex from nanocomposite poly(N-isopropylacrylamide/sodium alginate) hydrogels

Inclusion complex of curcumin with β-cyclodextrin (Cur-β-CD) was prepared using coprecipitation method. Stoichiometric ratio between curcumin and β-cyclodextrin was found to be 1:2 with an association constant of 3.80 × 10⁸ M⁻² using Benesi–Hildebrand method. Inclusion complex formation was confirmed by FTIR and DSC analyses. Water solubility of curcumin increased from 0.00122 to 0.721 mg mL⁻¹ with the inclusion complex formation. Release of the inclusion complex from the nanocomposite and conventional poly(N-isopropylacrylamide/sodium alginate hydrogels crosslinked by nanoclay and N,N′-methylenebis(acrylamide) (BIS), respectively, were investigated in simulated gastrointestinal conditions. Swelling ratio and cumulative release were dependent on the hydrogel composition and pH. At pH = 1.2, hydrogels showed the lowest release ratio, but at pH = 6.8 highest swelling ratios were attained. The swelling ratio and cumulative release decreased with increasing the nanoclay content in nanocomposite hydrogels. On the contrary, as the ratio of BIS in the conventional hydrogels increased, the swelling ratio and cumulative release increased. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47554.     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Gamma irradiation synthesis and characterization of AgNP/gelatin/PVA hydrogels for antibacterial wound dressings

An antibacterial hydrogel wound dressing was successfully synthesized by the gamma irradiation method. A gelatin solution was mixed with a poly(vinyl alcohol) (PVA) solution of similar concentrations at different weight ratios of 100 : 0, 80 : 20, and 60 : 40 w/w, and irradiated at 30, 40, or 50 kGy. The testing of physical properties showed that the addition of PVA could improve both durability and mechanical integrity. The 60 : 40 hydrogels irradiated at 30 kGy were optimal, and chosen to add silver nitrate at 0.25, 0.50, 0.75, or 1.00 wt % (based on the solid content) to improve the antibacterial properties. After gamma irradiation, silver nanoparticles (AgNPs) were formed. The AgNP/gelatin/PVA hydrogels were characterized for physical properties, cytotoxicity, and antibacterial activity. The AgNP/gelatin/PVA hydrogels could be used as antibacterial wound dressings because they exhibited appropriate physical properties, noncytotoxicity, and could inhibit the growth of tested bacteria. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41138.     

Synthesis and characterization of poly{N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid} hydrogels for drug delivery

A novel pH‐sensitive hydrogel system composed of itaconic acid (IA) and N‐[3‐(dimethylamino) propyl] methacrylamide was designed. This system was prepared by aqueous copolymerization with N,N‐methylene bisacrylamide as a chemical crosslinker. The chemical structure of the hydrogels was characterized by Fourier transform infrared (FTIR) spectroscopy. The microstructure and morphology of the hydrogels were evaluated by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The SEM study of hydrogels on higher magnification revealed a highly porous morphology with uniformly arranged pores ranging from 40 to 200 μm in size. XRD analysis revealed the amorphous nature of the hydrogels, and it was found that an increase in the IA content in the monomer feed greatly reduced the crystallinity of the hydrogels. Swelling experiments were carried out in buffer solutions at different pH values (1.2–10) at 37°C ± 1°C to investigate their pH‐dependent swelling behavior and dimensional stability. An increase in the acid part (IA) increased the swelling ratio of the hydrogels. Temperature‐sensitive swelling of the hydrogels was investigated at 20–70°C in simulated intestinal fluid. The hydrogels swelled at higher temperatures and shrank at lower temperatures. 5‐Aminosalicylic acid (5‐ASA) was selected as a model drug, and release experiments were carried out under simulated intestinal and gastric conditions. 5‐ASA release from the poly N‐[3‐(dimethylamino) propyl] methacrylamide‐co‐itaconic acid‐80 (PDMAPMAIA‐80) hydrogel was found to follow non‐Fickian diffusion mechanism under gastric conditions, and a super case II transport mechanism was found under intestinal conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Characterization and in vitro drug release properties of chitosan/acrylamide/gold nanocomposite prepared by gamma irradiation

A nanocomposite of (chitosan/polyacrylamide/gold) (Cs/AAm/Au) and (chitosan/polyacrylamide) (Cs/AAm) hydrogel were performed using gamma radiation and employed as a carrier for Cisplatin cancer drug. The structure and morphology were studied by FTIR and FE-SEM, respectively. XRD and TEM confirmed the formation of the nanoconposite. The average particle size ranged between 13 to 27?nm. EDX estimated that the concentration of Au⁰ nanoparticles in (Cs/AAm/Au) nanocomposite was 0.20%. Both (Cs/AAm) and (Cs/AAm/Au) have higher swelling percent and reached the swelling equilibrium within 6?h. The optimum pH of swelling was at pH 7.2. The maximum Cisplatin drug released was 33% for Cs/AAm hydrogel and 96% for Cs/AAm/Au nanocomposite at pH 7.2 through 320 and 410?min, respectively. The release mechanism was found to be followed the non-Fickian diffusion mechanism for both systems. The cytotoxicity against liver cancer (HepG2) was investigated. Cisplatin drug loaded samples (Cs/AAm) drug loaded hydrogel of concentration 100?μg/ml killed 76.4% of the cells and IC₅₀ reached 29?μg/ml whereas (Cs/AAm/Au) drug loaded nanocomposite killed 84.9 of the cells and IC₅₀ reached 22.7?μg/ml.     

Preparation and characterization of pH-sensitive hydrogel microparticles as a biological on–off switch

The pH-responsive swelling and release behaviors of anionic P(MAA-co-EGMA) hydrogel microparticles having various MAA and EG contents were investigated as a biological on–off switch for the design of an intelligent drug delivery system triggered by external pH changes. When DC was used as a dispersion stabilizer, well-dispersed hydrogel microparticles having an average diameter of approximately 4 μm were obtained. There was a drastic change of the equilibrium weight swelling ratio of P(MAA-co-EGMA) hydrogels at a pH of around 5, which is the pK _a of PMAA. When the MAA content in the hydrogel increased, the swelling ratio increased at a pH above 5 due to the more electrostatic repulsion between the charged groups of MAA. The P(MAA-co-EGMA) hydrogel microparticles showed a pH-responsive release behavior. At low pH (pH 4.0) small amounts of Rh-B were released while at high pH (pH 6.0) relatively large amounts of Rh-B were released from the hydrogels. The difference in the released amount of Rh-B from the hydrogels between pH 4.0 and 6.0 decreased when the MAA content in the hydrogels decreased, which means that the pH-responsive release behavior of the P(MAA-co-EGMA) hydrogel microparticles is closely related to the pH-responsive swelling property of the hydrogel.