Crab walking of quadruped robots with a locked joint failure

Fault tolerance is an important aspect in the development of control systems for multi-legged robots since a failure in a leg may lead to a severe loss of static stability of a gait. In this paper, an algorithm for tolerating a locked joint failure is described in gait planning for a quadruped robot with crab walking. A locked joint failure is one for which a joint cannot move and is locked in place. If a failed joint is locked, the workspace of the resulting leg is constrained, but legged robots have fault tolerance capability to continue walking maintaining static stability. A strategy for fault-tolerant gaits is described and, especially, a periodic gait is presented for crab walking of a quadruped. The leg sequence and the formula of the stride length are analytically driven based on gait study and robot kinematics. The adjustment procedure from a normal gait to the proposed fault-tolerant crab gait is shown to demonstrate the applicability of the proposed scheme.     

Fault-Tolerant Gait Planning for a Hexapod Robot Walking over Rough Terrain

Multi-legged robots need fault-tolerant gaits if one of attached legs suffers from a failure and cannot have normal operation. Moreover, when the robots with a failed leg are walking over rough terrain, fault-tolerance should be combined with adaptive gait planning for successful locomotion. In this paper, a strategy of fault-tolerant gaits is proposed which enables a hexapod robot with a locked joint failure to traverse two-dimensional rough terrain. This strategy applies a Follow-The-Leader (FTL) gait in post-failure walking, having the advantages of both fault-tolerance and terrain adaptability. The proposed FTL gait can produce the maximum stride length for a given foot position of a failed leg and better ditch-crossing ability than the previous fault-tolerant gaits. The applicability of the proposed FTL gait is verified using computer graphics simulations.     

Construction of a Gait Adaptation Model in Human Split-Belt Treadmill Walking Using a Two-Dimensional Biped Robot

A number of studies have measured kinematics, dynamics and oxygen uptake while a person walks on a treadmill. In particular, during walking on a split-belt treadmill, in which the left and right belts have different speeds, remarkable differences in kinematics are observed between normal subjects and subjects with cerebellar disease. In order to construct a gait adaptation model of such human split-belt treadmill walking, we proposed a simple control model and developed a new two-dimensional biped robot walk on a split-belt treadmill. We combined the conventional limit-cycle-based control consisting of joint PD control, cyclic motion trajectory planning and a stepping reflex with a newly proposed adjustment of P-gain at the hip joint of the stance leg. The data obtained in experiments on the robot (normal subject model and cerebellum disease subject model) have highly similar ratios and patterns to data obtained in experiments on normal subjects and subjects with cerebellar disease carried out by Bastian et al. We also showed that the P-gain at the hip joint of the stance leg was the control parameter of adaptation for symmetric gaits in split-belt walking and that P-gain adjustment corresponded to muscle stiffness adjustment by the cerebellum. Consequently, we successfully proposed a gait adaptation model for human split-belt treadmill walking, and confirmed the validity of our hypotheses and the proposed model using the biped robot.     

Fault-tolerant locomotion of the hexapod robot

In this paper, we propose a scheme for fault detection and tolerance of the hexapod robot locomotion on even terrain. The fault stability margin is defined to represent potential stability which a gait can have in case a sudden fault event occurs to one leg. Based on this, the fault-tolerant quadruped periodic gaits of the hexapod walking over perfectly even terrain are derived. It is demonstrated that the derived quadruped gait is the optimal one the hexapod can have maintaining fault stability margin nonnegative and a geometric condition should be satisfied for the optimal locomotion. By this scheme, when one leg is in failure, the hexapod robot has the modified tripod gait to continue the optimal locomotion.     

A fault tolerant gait for a hexapod robot over uneven terrain

The fault tolerant gait of legged robots in static walking is a gait which maintains its stability against a fault event preventing a leg from having the support state. In this paper, a fault tolerant quadruped gait is proposed for a hexapod traversing uneven terrain with forbidden regions, which do not offer viable footholds but can be stepped over. By comparing performance of straight-line motion and crab walking over even terrain, it is shown that the proposed gait has better mobility and terrain adaptability than previously developed gaits. Based on the proposed gait, we present a method for the generation of the fault tolerant locomotion of a hexapod over uneven terrain with forbidden regions. The proposed method minimizes the number of legs on the ground during walking, and foot adjustment algorithm is used for avoiding steps on forbidden regions. The effectiveness of the proposed strategy over uneven terrain is demonstrated with a computer simulation.     

Demonstration and Analysis of Quadrupedal Passive Dynamic Walking

Animals, including human beings, can travel in a variety of environments adaptively. Legged locomotion makes this possible. However, legged locomotion is temporarily unstable and finding out the principle of walking is an important matter for optimum locomotion strategy or engineering applications. As one of the challenges, passive dynamic walking has been studied on this. Passive dynamic walking is a walking phenomenon in which a biped walking robot with no actuator walks down a gentle slope. The gait is very smooth (like a human) and much research has been conducted on this. Passive dynamic walking is mainly about bipedalism. Considering that there are more quadruped animals than bipeds and a four-legged robot is easier to control than a two-legged robot, quadrupedal passive dynamic walking must exist. Based on the above, we studied saggital plane quadrupedal passive dynamic walking simulation. However, it was not enough to attribute the result to the existence of quadrupedal passive dynamic walking. In this research, quadrupedal passive dynamic walking is experimentally demonstrated by the four-legged walking robot 'Quartet 4'. Furthermore, changing the type of body joint, slope angle, leg length and variety of gaits (characteristics in four-legged animals) was observed passively. Experimental data could not have enough walking time and could not change parameters continuously. Then, each gait was analyzed quantitatively by the experiment and three-dimensional simulation.     

Bionic Quadruped Robot Dynamic Gait Control Strategy Based on Twenty Degrees of Freedom

Quadruped robot dynamic gaits have much more advantages than static gaits on speed and efficiency, however high speed and efficiency calls for more complex mechanical structure and complicated control algorithm. It becomes even more challenging when the robot has more degrees of freedom. As a result, most of the present researches focused on simple robot, while the researches on dynamic gaits for complex robot with more degrees of freedom are relatively limited. The paper is focusing on the dynamic gaits control for complex robot with twenty degrees of freedom for the first time. Firstly, we build a relatively complete 3D model for quadruped robot based on spring loaded inverted pendulum (SLIP) model, analyze the inverse kinematics of the model, plan the trajectory of the swing foot and analyze the hydraulic drive. Secondly, we promote the control algorithm of one-legged to the quadruped robot based on the virtual leg and plan the state variables of pace gait and bound gait. Lastly, we realize the above two kinds of dynamic gaits in ADAMS-MATLAB joint simulation platform which testify the validity of above method.      

Gait and foot trajectory planning for versatile motions of a six-legged robot

This article deals with the problem of planning and controlling a radially symmetric six-legged walker on an uneven terrain when a smooth time-varying body motion is required. The main difficulties lie on the planning of gaits and foot trajectories. As for the gaits, this article discusses the forward wave gait of a variable duty factor and a variable wave direction. With the commanded body motion, the maximum possible duty factor is computed using the speed limit of the leg swing motion. Guaranteeing this maximum duty factor contributes to obtain higher stability. We prove the “continuity” of this forward wave gait planning algorithm adds the versatility to gaits planned. The foot trajectory planning algorithm dynamically generates a smooth foot trajectory as a function of the instantaneous body motions by modifying standard leg motion templates. The robot can negotiate an uneven terrain by modifying a vertical leg motion by a signal of tactile sensors on the foot. The experiments prove that the robot can successfully track smooth curves with body rotations on an uneven terrain, and thus prove the robustness of the algorithms. © 1997 John Wiley & Sons, Inc.     

Two walking gaits for a planar bipedal robot equipped with a four-bar mechanism for the knee joint

The design of a knee joint is a key issue in robotics and biomechanics to improve the compatibility between prosthesis and human movements, and to improve the bipedal robot performances. We propose a novel design for the knee joint of a planar bipedal robot, based on a four-bar linkage. The dynamic model of the planar bipedal robot is calculated. Two kinds of cyclic walking gaits are considered. The first gait is composed of successive single support phases with stance flat-foot on the ground separated by impacts. The second gait is a succession of finite time double support phases, single support phases, and impacts. During the double support phase, both feet rotate. This phase is ended by an impact of the toe of the forward foot, while the rear foot is taking off. The single support phase is ended by an impact of the swing foot heel, the other foot keeping contact with the ground through its toe. For both gaits, the reference trajectories of the rotational joints are prescribed by cubic spline functions in time. A parametric optimization problem is presented for the determination of the parameters corresponding to the optimal cyclic walking gaits. The main contribution of this paper is the design of a dynamical stable walking gait with double support phases with feet rotation, impacts, and single support phases for this bipedal robot.     

Translational Crawl and Path Tracking of a Quadruped Robot

Translational crawl and path tracking are presented for a quadruped robot, named TITAN‐VIII, to walk on rough ground. The generalized and explicit formulation is derived to generate the translational crawl gait in an arbitrary direction automatically, to control the joint positions, and to estimate the robot localization in a walking environment. Compared to conventional gaits, the proposed gait is characterized by a natural and continuous transition between any successive gait cycles, by a maximized stride of the robot in each gait cycle, and by different foot trajectories corresponding to the uneven terrain. Especially, the proposed approach enables the quadruped robot to track a reference path in a complex walking environment, based on dead‐reckoning localization for the robot. The effectiveness of the proposed method is demonstrated through the experimental results. © 2002 Wiley Periodicals, Inc.     

Planar legged walking of a passive-spine hexapod robot

This paper proposes a new legged walking method for a novel passive-spine hexapod robot. This robot consists of several body segments connected by passive body joints. Each of the body segments carries two 1-DoF (degree of freedom) actuated legs. The robot is capable of achieving planar legged walking by rapidly abducting and adducting its legs. To model the mobility of a robot based on this simple design, the candidate configurations from all possible configurations are first selected in a mobility analysis of the robot based on the screw theory. All the feasible sequences of these candidate configurations are then searched to form planar locomotion gaits. Next, locomotive performance of the gaits is analyzed. Finally, the proposed locomotion design and gait planning methods are verified through simulations and experiments.     

Synchronization of a class of cyclic discrete-event systems describing legged locomotion

It has been shown that max-plus linear systems are well suited for applications in synchronization and scheduling, such as the generation of train timetables, manufacturing, or traffic. In this paper we show that the same is true for multi-legged locomotion. In this framework, the max-plus eigenvalue of the system matrix represents the total cycle time, whereas the max-plus eigenvector dictates the steady-state behavior. Uniqueness of the eigenstructure also indicates uniqueness of the resulting behavior. For the particular case of legged locomotion, the movement of each leg is abstracted to two-state circuits: swing and stance (leg in flight and on the ground, respectively). The generation of a gait (a manner of walking) for a multi-legged robot is then achieved by synchronizing the multiple discrete-event cycles via the max-plus framework. By construction, different gaits and gait parameters can be safely interleaved by using different system matrices. In this paper we address both the transient and steady-state behavior for a class of gaits by presenting closed-form expressions for the max-plus eigenvalue and max-plus eigenvector of the system matrix and the coupling time. The significance of this result is in showing guaranteed stable gaits and gait switching, and also a systematic methodology for synthesizing controllers that allow for legged robots to change rhythms fast.     

Body Workspace of Quadruped Walking Robot and its Applicability in Legged Locomotion

This paper discusses on determination of the workspace of the body of a quadruped walking robot, called “body workspace”, and its applicability in legged locomotion. The body workspace represents the set of all valid body configurations for a next step by considering three constraints of a body position: existence of the inverse kinematic solutions, reach-ability of the next swing leg to the next desired foothold, and static equilibrium of the robot when the next swing leg is lifted. The space contains all the body positions that ensure the existence of inverse kinematic solutions, is calculated in the first. Then, a subspace inside the determined space that allows the robot to reach the next desired foothold is analyzed. Finally, the workspace is obtained by excluding all the positions inside the subspace that do not ensure the equilibrium of the robot when the next swing leg is lifted. Therefore, the workspace shows all possible solutions for choosing the next body configuration of a given static walking problem. It is significant in improving the robot’s performances since moving body takes an intrinsic role in static walking, besides swinging a leg. The algorithm runs fast in real-time because it is a pure geometric method. The body workspace of a quadruped walking robot is visualized to help the understanding of the algorithm. In addition, applications of using the body workspace in improving the robot’s ability are presented to show potential applicability of the workspace.     

Implementation of omnidirectional crawl for a quadruped robot

As a reptile animal crawls in a cluttered environment, so a quadruped robot should be able to crawl on an irregular ground profile with its static stability by adopting the straightgoing and standstill-turning free gaits. The generalized and explicit formulations for the automatic generation of straight-going gaits and various standstill-turning gaits are presented in this paper. The maximized stride for the straight-going gait and the maximum turning angle for the turning gait of a quadruped robot named TITAN-VIII in a gait cycle are discussed by considering the robot's mechanism constraints and the irregularities of the ground profile. The control algorithm, including control of the joint positions of the robot, is described to implement the desired walking path of the quadruped robot. The effectiveness of the proposed method is demonstrated through experimental result.     

Autonomous evolution of dynamic gaits with two quadruped robots

A challenging task that must be accomplished for every legged robot is creating the walking and running behaviors needed for it to move. In this paper we describe our system for autonomously evolving dynamic gaits on two of Sony's quadruped robots. Our evolutionary algorithm runs on board the robot and uses the robot's sensors to compute the quality of a gait without assistance from the experimenter. First, we show the evolution of a pace and trot gait on the OPEN-R prototype robot. With the fastest gait, the robot moves at over 10 m/min, which is more than forty body-lengths/min. While these first gaits are somewhat sensitive to the robot and environment in which they are evolved, we then show the evolution of robust dynamic gaits, one of which is used on the ERS-110, the first consumer version of AIBO.     

六足步行机横向行走最佳步态及其运动特性初探

本文分别以纵向稳定裕量和一般稳定裕量为准则,通过对六足步行机横向行走几何模型的分析和计算机优化计算,得出六足步行机横向运动时的最佳步态为广义三角步态.此外,文中对广义三角步态的运动特性(包括静态稳定性、爬坡能力、越沟能力等)进行了初步研究,阐明了这些运动特性与步行机若干几何参数间的内在联系,为六足步行机的总体尺寸设计提供了理论依据。     

Kinematic and dynamic analysis of a hexapod walking-running-bounding gaits robot and control actions

Kinematic and dynamic analysis, and control actions of a hexapod robot were realized for walking, running and bounding gaits in this study. If biological inspiration can be used to build robots that deal robustly with complex environments, it should be possible to demonstrate that legged biorobots can function in natural environments. Firstly, we tried to report on theoretic work with a six legged robot designed to emulate spider behavior like walking, running and bounding. We demonstrated theoretically that it can successfully walk, run and bound like a spider over natural terrain. Secondly, limitations in its capability were evaluated, and many biologically based important improvements were obtained for future experimental work. Thirdly, the hexapod robot with bounding gait was controlled by proportional-derivative control algorithm and was carried out by using spring loaded inverted pendulum model. Consequently, the developed kinematic and dynamic methods, and control action method makes both the system control easy and the system performance is improved by decreasing the run time for each loop.     

Biped robots: Correlations between technological design and dynamic behavior

The authors of the paper have collaborated in a joint project involving four French control, mechanics and computer-science laboratories. In the paper, various mechanical architectures of biped robots are examined in detail, showing that their walking capabilities are closely linked to the kinematic characteristics of the mechanical structure. Then, it is shown that the geometrical and inertial parameters of the mechanical systems strongly affect the gait. In particular, the influence of the biped inertia on the lateral stability of the system, as well as the conditions of the existence of passive pendular gaits during the swing phase, are computationally analyzed. Extending the ideas previously developed, some characteristics of the mechanical architecture and design of the BIP project can be clearly justified. It turns out that a kinematic structure with 15 degrees of freedom is necessary in order for the biped robot to develop anthropomorphic gaits. Furthermore, as an anthropometric mass distribution can improve the walking abilities of the robot, special transmitters have been designed in order to help to fulfil this requirement.     

电动并联六轮足机器人的运动驱动与多模态控制方法

提出一种并联六轮足移动机器人．该机器人设有多模式Stewart型腿结构,其负载能力大,集成了轮式运动和足式运动的优点,可实现足式、轮式、轮足复合式运动．首先,阐述了机器人设计思路,对电动并联六轮足机器人的硬件系统和控制系统进行设计．其次,针对足式运动模式,设计了一套完整的足式“三角”步态和稳定行走算法,该算法可降低足端与地面之间的垂直方向冲击,防止足式运动拖腿或打滑;针对轮式运动模式,设计并介绍了6轮协同控制和轮式协同转向原理;针对轮足复合式运动模式,介绍了变高度、变支撑面、变轮距、主动隔振控制原理,重点分析了主动隔振控制和变轮距控制,可实现主动隔振及姿态平稳控制,提高了机器人在崎岖颠簸地形下的轮足复合式运动的稳定性．最后,对电动并联六轮足机器人的足式、轮式、轮足复合式运动模式进行实验,实验结果验证了本文提出的并联六轮足移动机器人设计的可行性和各运动模式下驱动与控制算法的有效性．     

Gait optimization of step climbing for a hexapod robot

RHex-style hexapod robot is a type of legged robot which can perform multiple moving gaits according to different applications, due to its simple structure and strong mobility. However, traversing high obstacles has always been a big challenge for legged robots. In this paper, gait optimization of a hexapod robot is proposed for climbing steps at different heights, which even enables the robot to climb the step 3.9 times of the leg length. First, a previous step-climbing gait is optimized by adjusting body inclination when placing front legs on top of the step, which enables RHex with different sizes to perform the rising stage of the gait. Second, to improve the climbing heights, a novel quasi-static climbing gait is proposed by using the reversed claw-shape legs to reach the higher step. The nondeformable legs are used to raise the center of mass (COM) of the body by lifting the front and rear legs alternately so that the front legs can reach the top of the step, then the front and middle legs are lifted alternately to maneuver COM up onto the step. The simulations and dynamic analysis of climbing steps are utilized to verify the feasibility of the improved gait. Finally, the step-climbing experiments at different heights are performed with the optimized gaits to compare with the existing gaits. The results of simulations and experiments show the superiority of the proposed gaits due to climbing higher steps.