Preparation and characterization of anionically polymerized butadiene‐isoprene copolymer/clay nanocomposites

Butadiene‐isoprene copolymer/montmorillonite (BIR/MMT) nanocomposites were synthesized successfully via in situ anionic polymerization. The results of transmission electron microscopy and X‐ray diffractometer showed that the clay layers were exfoliated and high reaction temperature benefited the exfoliation of layers in BIR/MMT. The polymerization still exhibited “living” characteristics with the addition of organophilic montmorillonite (OMMT). However, the contents of 1,2‐polybutadiene and 3,4‐polyisoprene of the copolymer decreased with the addition of OMMT, because of its absorption effect on N,N,N′,N′‐tetramethylethanediamine as revealed by ¹H NMR. Moreover, it was observed that the glass‐transition temperature of the BIR/MMT nanocomposites also decreased when compared with the BIR copolymers. The thermal stability of the nanocomposites was improved, because of the barrier property of exfoliated clay layers. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 1167–1172, 2006     

Preparation and characteristics of nitrile rubber (NBR) nanocomposites based on organophilic layered clay

The effect of clay modification on organo‐montmorillonite/NBR nanocomposites has been studied. Organo‐montmorillonite/NBR nanocomposites were prepared through a melt intercalation process. NBR nanocomposites were characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), dynamic mechanical thermal analysis (DMTA) and a universal testing machine (UTM). XRD showed that the basal spacing in the clay increased, which means that the NBR matrix was intercalated in the clay layer galleries. On TEM images, organo‐montmorillonite (MMT) particles were clearly observed, having been exfoliated into nanoscale layers of about 10–20 nm thickness from their original 40 µm particle size. These layers were uniformly dispersed in the NBR matrix. The DMTA test showed that for these nanocomposites the plateau modulus and glass transition temperature (T_g) increased with respect to the corresponding values of pure NBR (without clay). UTM test showed that the nanocomposites had superior mechanical properties, ie strength and modulus. These improved properties are due to the nanoscale effects and strong interactions between the NBR matrix and the clay interface. Copyright © 2003 Society of Chemical Industry     

Preparation and characterization of polyurethane–organoclay nanocomposites

Nanocomposite polyurethane (PU)–organoclay materials have been synthesized via in‐situ polymerization. The organoclay is first prepared by intercalation of tyramine into montmorillonite (MMT)‐clay through ion exchange process. The syntheses of polyurethane–organoclay hybrid films containing different ratios of clay were carried out by swelling the organoclay into diol and diamine followed by addition of diisocyanate and then cured. The nanocomposites with dispersed and exfoliated structure of MMT were obtained as evidenced by X‐ray diffraction and scanning electron microscope. X‐ray diffraction showed that there is no peak corresponding to d₀₀₁ spacing in organoclay with the ratios up to 20 wt%. SEM images confirmed the dispersion of nanometer silicate layers in the polyurethane matrix. Also, it was found that the presence of organoclay leads to improvement in the mechanical properties. The tensile strength was increased with increasing the organoclay contents to 20 wt% by 221% in comparision to the PU with 0% organoclay. POLYM. COMPOS. 28:108–115, 2007. © 2007 Society of Plastics Engineers     

Novel polylactide/vermiculite nanocomposites by in situ intercalative polymerization. I. Preparation,characterization, and properties

Polylactide (PLA)/vermiculite nanocomposites were prepared by in situ intercalative polymerization of L,L ‐lactide (LLA) in the presence of organomodified vermiculite (VMT). The d‐spacings of both the organomodified VMT and the exfoliated nanocomposites were investigated by X‐ray diffraction (XRD) analysis, and the morphology of exfoliated nanocomposites was examined by transmission electron microscopy (TEM). Thermogravimetric analysis (TGA) indicated that there is some enhancement in degradation behavior between the nanocomposites and the PLA matrix. Dynamic mechanical analysis (DMA) confirmed the constraint effect of exfoliated VMT layers on PLA chains, which is beneficial to the increased storage and loss modulus and increased glass transition temperature. The tensile strength showed that the exfoliated nanocomposites are reinforced and toughened by the addition of nanometer‐size vermiculite layers. POLYM. COMPOS., 28:545–550, 2007. © 2007 Society of Plastics Engineers     

Effective preparation and characterization of montmorillonite/poly(ε‐caprolactone)‐based polyurethane nanocomposites

In this study, montmorillonite (MMT)/poly(?‐caprolactone)‐based polyurethane cationomer (MMT/PCL‐PUC) nanocomposites were prepared and their mechanical properties, thermal stability, and biodegradability were investigated. PCL‐PUC has 3 mol % of quaternary ammonium groups in the main chain. The MMT was successfully exfoliated and well dispersed in the PCL‐PUC matrix for up to 7 wt % of MMT. The 3 mol % of quaternary ammonium groups facilitated exfoliation of MMT. The 1 wt % MMT/PCL‐PUC nanocomposites showed enhanced tensile properties relative to the pure PCL‐PU. As the MMT content increased in the MMT/PCL‐PUC nanocomposites, the degree of microphase separation of PCL‐PUC decreased because of the strong interactions between the PCL‐PUC chains and the exfoliated MMT layers. This resulted in an increase in the Young's modulus and a decrease in the elongation at break and maximum stress of the MMT/PCL‐PUC nanocomposites. Biodegradability of the MMT/PCL‐PUC nanocomposites was dramatically increased with increasing content of MMT, likely because of the less phase‐separated morphology of MMT/PCL‐PUC. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mechanical and dynamic mechanical properties of nylon 66/montmorillonite nanocomposites fabricated by melt compounding

Nylon 66 nanocomposites were prepared by melt compounding of nylon 66 with organically modified montmorillonite (MMT). The organic MMT was pre‐modified with about 14 wt% of ammonium surfactant, much lower than the 35–46 wt% in most commercial organic MMT powders. Transmission electron microscope observation indicated that the MMT layers were well exfoliated in nylon 66 matrix. Dynamic mechanical analysis confirmed the constraint effect of exfoliated MMT layers on nylon 66 chains, which benefited the increased storage modulus, increased glass transition temperature and reduced magnitude of alpha relaxation peak. The effects of organic MMT loading levels on reinforcement and fracture behaviour of the nanocomposites were evaluated using tensile and three‐point bending tests. The addition of the organic MMT clearly increased Young's modulus and tensile strength but decreased ductility and fracture toughness of nylon 66. Copyright © 2004 Society of Chemical Industry     

High performance epoxy resin nanocomposites containing both organic montmorillonite and castor oil-polyurethane

Summary Epoxy resin/polyurethane interpenetrating polymer network nanocomposites with various contents of organophilic montmorillonite (oM-EP/PU nanocomposites) were prepared by a sequential polymeric technique and an in situ intercalation method. X-ray diffraction(XRD), and transmission electronic microscopy(TEM) analysis showed that organophilic montmorillonite (oMMT) disperses uniformly in epoxy resin/polyurethane interpenetrating networks(IPNs), and the intercalated or exfoliated microstructures of oMMT are formed. Differential scanning calorimetry(DSC) test proved that oMMT promotes the compatibility of EP phase and PU phase, and glass transition temperature(T_g) of oM-EP/PU nanocomposites improves with increasing oMMT content. Mechanical properties tests and thermal gravity analysis (TGA) indicated that oMMT and the IPNs of EP and PU exhibit synergistic effect on improving mechanical and thermal properties of pure EP. The mechanism of toughing and reinforcing of oM-EP/PU nanocomposites was further discussed by scanning electronic microscope(SEM).     

Effect of organoclays on the properties of polyurethane/clay nanocomposite coatings

Linear, one‐binding‐site or two‐binding‐site (N⁺) organifiers with two hydroxyl end groups were synthesized, and novel organoclays were prepared through a cation‐exchange reaction between pristine sodium montmorillonite and the synthesized organifiers. After sonication of the as‐prepared organoclay in N,N′‐dimethylformamide for 10 min, the average size of the clay decreased to about 1 μm. The X‐ray diffraction patterns confirmed that the d‐spacing of the silicate layers of the organoclay expanded from 1.1 to about 1.9 nm and the peak intensity decreased with the molecular weight of the organifier increasing. Polyurethane/clay nanocomposites were synthesized by a one‐shot polymerization method. Both intercalated and exfoliated structures of the layered silicates in the polyurethane matrix were observed from transmission electron microscopy micrographs, and the d‐spacing ranged from 4 to 10 nm. The thermal and mechanical properties of the nanocomposite were enhanced by the introduction of the organoclay into the polyurethane matrix. An approximately 40–46°C increase in the onset decomposition temperature, a 200% increase in the tensile strength with a 0.5 wt % clay loading, and a 49% increase in Young's modulus with a 3 wt % clay loading were achieved. The effects of the molecular weight and the number of binding sites of the organifier on the properties of the nanocomposites were also evaluated. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of exfoliated organic montmorillonite/poly(3,4‐ethyldioxythiophene) nanocomposites

Montmorillonite, organically modified by octadecylammine salt, has been adopted to successfully fabricate the exfoliated organic montmorillonite/poly(3,4‐ethyldioxythiophene) (OMMT/PEDOT) nanocomposites by in situ polymerization in aqueous media. Hydrochloric acid, 1,5‐naphthalenedisulfonic acid, and sodium benzenesulphonate have been employed to activate the polymerization of 3,4‐ethyldioxythiophene by offering active sites on the layers of montmorillonite. The resulting exfoliated nanocomposites have been characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, thermogravimetric analysis, and electrical conductivity measurement and showed controllable conductivity in the range of 10^?7 to 10^?2 S/cm and improved thermal stability compared with pure PEDOT. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Toughened nylon66/nylon6 ternary nanocomposites by elastomers

The elastomer toughening of PA66/PA6 nanocomposites prepared from the organic modified montmorillonite (OMMT) was examined as a means of balancing stiffness/strength versus toughness/ductility. Several different formulations varying in OMMT content were made by mixing of PA6 and OMMT as a master‐batch and then blending it with PA66 and different elastomers in a twin screw extruder. In this sequence, the OMMT layers were well exfoliated in the nylon alloy matrix. The introduction of silicate layers with PA6 induced the appearance of the γ crystal phase in the nanocomposites, which is unstable and seldom appears in PA66 at room temperature and it further affected the morphology and dispersion of rubber phase resulting in much smaller rubber particles. The incorporation of POE‐g‐MA particles toughened the nanocomposites markedly, but the tensile modulus and strength were both reduced. Conversely, the use of OMMT increased the modulus but decreased the fracture toughness. The nanocomposites exhibited balanced stiffness and toughness. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Rectorite/thermoplastic polyurethane nanocomposites: Preparation,characterization, and properties

A newly developed kind of layered clay, rectorite (REC), has been used to yield intercalated or exfoliated thermoplastic polyurethane rubber (TPUR) nanocomposites by melt‐processing intercalation. Because of the swollen layered structure of REC, similar to that of montmorillonite, organic rectorites (OREC) can also be obtained through ion‐exchange reaction with two different quaternary ammonium salts (QAS1, QAS2) and benzidine (QAS3). The microstructure and dispersibility of OREC layers in TPUR matrix were examined by X‐ray diffraction and transmission electron microscopy, which revealed not only that the composites with lower amounts of clay are intercalation or part exfoliation nanocomposites, but also that the mechanical properties of the composites were substantially enhanced. The maximum ultimate tensile strength for TPUR/OREC nanocomposites appeared at 2 wt % OREC loading. With increasing OREC contents, the tear strength of the composites increased significantly. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 608–614, 2004     

Effect of clay modification on the morphological,mechanical, and thermal properties of polyamide 6/polypropylene/montmorillonite nanocomposites

Polyamide 6/polypropylene (PA6/PP = 70/30 parts) blends containing 4 phr (parts per hundred resin) of organophilic montmorillonite (OMMT) were prepared by melt compounding. The sodium montmorillonite (Na‐MMT) was modified using three different types of alkyl ammonium salts, namely dodecylamine, 12‐aminolauric acid, and stearylamine. The effect of clay modification on the morphological and mechanical properties of PA6/PP nanocomposites was investigated using x‐ray diffraction (XRD), transmission electron microscopy (TEM), tensile, flexural, and impact tests. The thermal properties of PA6/PP nanocomposites were characterized using thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and heat distortion temperature (HDT). XRD and TEM results indicated the formation of exfoliated structure for the PA6/PP nanocomposites prepared using stearylamine modified montmorillonite. On the other hand, a mixture of intercalated and exfoliated structures was found for the PA6/PP nanocomposites prepared using 12‐aminolauric acid and dodecylamine modified montmorillonite. Incorporation of OMMT increased the stiffness but decreased the ductility and toughness of PA6/PP blend. The PA6/PP nanocomposite containing stearylamine modified montmorillonite showed the highest tensile, flexural, and thermal properties among all nanocomposites. This could be attributed to better exfoliated structure in the PA6/PP nanocomposite containing stearylamine modified montmorillonite. The storage modulus and HDT of PA6/PP blend were increased significantly with the incorporation of both Na‐MMT and OMMT. The highest value in both storage modulus and HDT was found in the PA6/PP nanocomposite containing stearylamine modified montmorillonite due to its better exfoliated structure. POLYM. COMPOS., 31:1156–1167, 2010. © 2009 Society of Plastics Engineers     

The effect of nano‐sized silicate layers from montmorillonite on glass transition,dynamic mechanical,and thermal degradation properties of segmented polyurethane

The glass transition temperature of the hard‐segment phase and the storage modulus of segmented polyurethane increased substantially in the presence of a small amount of tethered nano‐sized layered silicates from montmorillonite compared with their pristine state (by 44°C and by 2.8‐fold, respectively). Furthermore, the heat resistance and degradation kinetics of these montmorillonite/polyurethane nanocomposites were enhanced, as shown by thermogravimetric analysis. In particular, a 40°C increase in the degradation temperature and a 14% increase in the degradation activation energy occurred in polyurethane containing 1 wt % trihydroxyl swelling agent‐modified montmorillonite compared to that of the pristine polyurethane. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1741–1748, 2002     

梳状支链水性聚氨酯/蒙脱土复合材料结构与性能

以自制的新型梳状支链聚合物二醇和蒙脱土为原料,采用原位插层聚合技术制备了梳状支链结构水性聚氨酯/蒙脱土（CWPU/MMT）复合材料,着重考察了蒙脱土对CWPU/MMT复合材料力学性能、耐热性能和耐水性能的影响。结果表明,在CWPU/MMT复合材料中,Na⁺ -MMT以团聚体存在于CWPU中,分散不均匀,观察不到Na⁺ -MMT的插层结构,对材料的力学性能和耐热性没有明显的影响,反而显著降低了材料的耐水性;2T-MMT和C₁₈-MMT在CWPU中分散均匀,可同时观察到OMMT的插层结构和OMMT的剥离片层,能明显提高材料的力学性能、耐热性和耐水性,其中以2T-MMT对CWPU力学性能、耐热性和耐水性的提高最为显著。     

Novel preparation and properties of EPDM/montmorillonite nanocomposites

This article reports on a novel route to develop ethylene–propylene–diene rubber (EPDM)/montmorillonite nanocomposites Modification of the MMT was carried out with maleic anhydride (MA), which acts as the intercalation agent for MMT and the vulcanizing agent for EPDM matrix, as well as the compatibilizer for the EPDM and MMT phases. The effect of MA‐modified MMT in nanocomposites was investigated by focusing on three major aspects: structural analysis, thermal properties, and material properties. The d‐spacings of both the MA modified MMT and exfoliated nanocomposites were investigated by X‐ray diffraction (XRD), and the morphology of these nanocomposites was examined by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Dynamic mechanical analysis confirms the constraint effect of exfoliated MMT layers on EPDM chains, which benefited the increased storage modulus, increased glass transition temperature. Thermogravimetric analysis indicates that there is some enhancement in degradation behavior between the nanocomposites and EPDM matrix. The nanocomposites exhibit great improvement in tensile strength and modulus, as well as elongation‐at‐break. The effects of MA addition on the formation of nano‐metric reinforcement and on the mechanical properties of nanocomposites are discussed. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 2578–2585, 2006     

Synthesis and characterization of polyurethane cationomer/MMT hybrid composite

BACKGROUND: The development of polymeric nanocomposites incorporating intercalated or exfoliated layered silicate clays into the organic matrix has been substantially motivated by the significant improvements induced by the presence of the inorganic component. Moreover, understanding and controlling the dispersion of inorganic layers into segmented polyurethane matrices by means of ionic interactions, and exploiting these interactions to enhance physicomechanical behaviour, could be of great interest in the field of polymer nanocomposites. RESULTS: New cationic polyurethane elastomers were prepared starting from poly(butylene adipate)diol (M_n = 1000 g mol^?1), 4,4′‐diphenylmethane diisocyanate, 1,4‐butanediol and N‐methyldiethanolamine or N,N′‐β‐hydroxyethylpiperazine, used as potential quaternizable moieties. The characterization of the polymers was achieved using specific analyses employed for the macromolecular samples (Fourier transform infrared and ¹H NMR spectroscopy, thermogravimetric analysis (TGA), gel permeation chromatography). An extension of our research on polymers reinforced with organically modified montmorillonite (OM‐MMT) in order to prepare hybrid composites with improved properties was performed and the resulting materials were characterized using TGA, X‐ray diffraction, atomic force microscopy and scanning electron microscopy. Also, the mechanical properties of the cationic polyurethane/OM‐MMT composites were investigated in comparison with the pristine ionic/non‐ionic polymers and their composites containing non‐ionic polymer blended with OM‐MMT or ionic polymer and unmodified MMT. CONCLUSION: The insertion of the organically modified clay into the polymeric matrix gave an improvement of the mechanical properties of the polyurethane composites, especially the tensile strength and stiffness of the hybrid materials. Copyright © 2009 Society of Chemical Industry     

Comprehensive high‐performance epoxy nanocomposites co‐reinforced by organo‐montmorillonite and nano‐SiO2

Comprehensive high‐performance epoxy nanocomposites were successfully prepared by co‐incorporating organo‐montmorillonite (o‐MMT) and nano‐SiO₂ into epoxy matrix. Because of the strong interaction between nanoscale particles, the MMT layers were highly exfoliated, and the exfoliated nanoscale MMT monoplatelets took an interlacing arrangement with the nano‐SiO₂ particles in the epoxy matrix, as evidenced by X‐ray diffraction measurement and transmission electron microscopy inspection. Mechanical tests and thermal analyses showed that the resulting epoxy/o‐MMT/nano‐SiO₂ nanocomposites improved substantially over pure epoxy and epoxy/o‐MMT nanocomposites in tensile modulus, tensile strength, flexural modulus, flexural strength, notch impact strength, glass transition temperature, and thermal decomposition temperature. This study suggests that co‐incorporating two properly selected nanoscale particles into polymer is one pathway to success in preparing comprehensive high‐performance polymer nanocomposites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of poly(butyl acrylate‐co‐methyl methacrylate)/montmorillonite waterborne nanocomposite via semibatch emulsion polymerization

Poly(butyl acrylate‐co‐methyl methacrylate)‐montmorillonite (MMT) waterborne nanocomposites were successfully synthesized by semibatch emulsion polymerization. The syntheses of the nanocomposites were performed in presence of sodium montmorillonite (Na‐MMT) and organically modified montmorillonite (O‐MMT). O‐MMT was used directly after the modification of Na‐MMT with dimethyl dioctadecyl ammonium chloride. Both Na‐MMT and O‐MMT were sonified to obtain nanocomposites with 47 wt % solids and 3 wt % Na‐MMT or O‐MMT content. Average particle sizes of Na‐MMT nanocomposites were measured as 110–150 nm while O‐MMT nanocomposites were measured as 200–350 nm. Both Na‐MMT and O‐MMT increased thermal, mechanical, and barrier properties (water vapor and oxygen permeability) of the pristine copolymer explicitly. X‐ray diffraction and transmission electron microscope studies show that exfoliated morphology was obtained. The gloss values of O‐MMT nanocomposites were found to be higher than that of the pristine copolymer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42373.     

原位聚合法制备聚氨酯/蒙脱土复合材料研究

采用原位聚合方法制备了蒙脱土( MMT)在聚氨酯(PUR)基体内呈不同分散状态的PUR/MMT复合材料.PUR预聚反应结束后加入MMT制备的PUR/MMT,MMT片层间距增大,基本以插层状态存在;利用异氰酸酯与MMT上的羟基官能团反应,使部分PUR分子链的硬段部分连接在MMT片层之上,可以使MMT片层在PUR基体内几乎...     

New aramid‐based nanocomposites: Synthesis and characterization

New type of nanocomposites containing various proportions of montmorillonite in aromatic polyamide was prepared via solution intercalation method. Aramid chains were synthesized by reacting 4,4′‐oxydianiline with isophthaloyl chloride in N,N′‐dimethyl acetamide. Dodecylamine was used as swelling agent to change the hydrophilic nature of montmorillonite into organophilic. Appropriate amounts of organoclay were mixed in the polymer solution using high‐speed mixer for complete dispersion of the clay. Thin films cast from these materials after evaporating the solvent were characterized by XRD, TEM, mechanical, thermal, and water absorption measurements. The structure and morphology of the nanocomposites determined by XRD and TEM revealed the formation of exfoliated and intercalated clay platelets in the aramid matrix. Mechanical data indicated improvement in the tensile strength and modulus of the nanocomposites with clay loading up to 6 wt%. The glass transition temperature increased up to 12 wt% clay content and thermal stability amplified with increasing clay loading. The water absorption reduced gradually as a function of organoclay and approached to zero with 20 wt% organoclay in the aramid. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers