Polymerization of 1,3‐dienes containing functional groups: 8. Free‐radical polymerization of 2‐triethoxysilyl‐ 1,3‐butadiene

The presence of a bulky substituent at the 2‐position of 1,3‐butadiene derivatives is known to affect the polymerization behavior and microstructure of the resulting polymers. Free‐radical polymerization of 2‐triethoxysilyl‐1,3‐butadiene ( 1 ) was carried out under various conditions, and its polymerization behavior was compared with that of 2‐triethoxymethyl‐ and other silyl‐substituted butadienes. A sticky polymer of high 1,4‐structure ( ) was obtained in moderate yield by 2,2′‐azobisisobutyronitrile (AIBN)‐initiated polymerization. A smaller amount of Diels–Alder dimer was formed compared with the case of other silyl‐substituted butadienes. The rate of polymerization (R_p) was found to be R_p = k[AIBN]^0.5[ 1 ]^1.2, and the overall activation energy for polymerization was determined to be 117 kJ mol^?1. The monomer reactivity ratios in copolymerization with styrene were r ₁ = 2.65 and r_st = 0.26. The glass transition temperature of the polymer of 1 was found to be ?78 °C. Free‐radical polymerization of 1 proceeded smoothly to give the corresponding 1,4‐polydiene. The 1,4‐E content of the polymer was less compared with that of poly(2‐triethoxymethyl‐1,3‐butadiene) and poly(2‐triisopropoxysilyl‐1,3‐butadiene) prepared under similar conditions. Copyright © 2010 Society of Chemical Industry     

Synthesis of polydimethylsiloxane‐block‐polystyrene‐block‐polydimethylsiloxane via polysiloxane‐based macroinitiator in supercritical CO2

Polydimethylsiloxane‐block‐polystyrene‐block‐polydimethylsiloxane (PDMS‐b‐PS‐b‐PDMS) was synthesized by the radical polymerization of styrene using a polydimethylsiloxane‐based macroazoinitiator (PDMS MAI) in supercritical CO₂. PDMS MAI was synthesized by reacting hydroxy‐terminated PDMS and 4,4′‐azobis(4‐cyanopentanoyl chloride) (ACPC) having a thermodegradable azo‐linkage at room temperature. The polymerization of styrene initiated by PDMS MAI was investigated in a batch system using supercritical CO₂ as the reaction medium. PDMS MAI was found to behave as a polyazoinitiator for radical block copolymerization of styrene, but not as a surfactant. The response surface methodology was used to design the experiments. The parameters used were pressure, temperature, PDMS MAI concentration and reaction time. These parameters were investigated at three levels (?1, 0 and 1). The dependent variable was taken as the polymerization yield of styrene. PDMS MAI and PDMS‐b‐PS‐b‐PDMS copolymers obtained were characterized by proton nuclear magnetic resonance and infrared spectroscopy. The number‐ and weight‐average molecular weights of block copolymers were determined by gel permeation chromatography. Copyright © 2004 Society of Chemical Industry     

Effect of acrylic acid neutralization on ‘livingness’ of poly[styrene‐ran‐(acrylic acid)] macro‐initiators for nitroxide‐mediated polymerization of styrene

BACKGROUND: The effect of acrylic acid neutralization on the degradation of alkoxyamine initiators for nitroxide‐mediated polymerization (NMP) was studied using styrene/acrylic acid and styrene/sodium acrylate random copolymers (20 mol% initial acrylate feed concentration) as macro‐initiators. The random copolymers were re‐initiated with fresh styrene in 1,4‐dioxane at 110 °C at SG1 mediator/BlocBuilder^® unimolecular initiator ratios of 5 and 10 mol%. RESULTS: The value of k_pK (k_p = propagation rate constant, K = equilibrium constant) was not significantly different for styrene/acrylic acid and styrene/sodium acrylate compositions at 110 °C (k_pK = 2.4 × 10^?6–4.6 × 10^?6 s^?1) and agreed closely with that for styrene homopolymerization at the same conditions (k_pK = 2.7 × 10^?6–3.0 × 10^?6 s^?1). All random copolymers had monomodal, narrow molecular weight distributions (polydispersity index M?_w/M?_n = 1.10–1.22) with similar number‐average molecular weights M?_n = 19.3–22.1 kg mol^?1. Re‐initiation of styrene/acrylic acid random copolymers with styrene resulted in block copolymers with broader molecular weight distributions (M?_w/M?_n = 1.37–2.04) compared to chains re‐initiated by styrene/sodium acrylate random copolymers (M?_w/M?_n = 1.33). CONCLUSIONS: Acrylic acid degradation of the alkoxyamines was prevented by neutralization of acrylic acid and allowed more SG1‐terminated chains to re‐initiate the polymerization of a second styrenic block by NMP. Copyright © 2008 Society of Chemical Industry     

Synthesis of poly(β‐pinene)‐g‐polystyrene from allylic brominated poly(β‐pinene)

Poly(β‐pinene) was brominated by N‐bromosuccinimide on the allylic carbons. Then the brominated product was activated by AlEt₂Cl to initiate the polymerization of styrene to give a β‐pinene/styrene graft copolymer. AlEt₂Cl was selected because it alone could not initiate the polymerization of styrene. The obtained graft copolymer was characterized by GPC, ¹H‐NMR, and DSC measurements, respectively. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 599–603, 2000     

Synthesis,characterization and conformational transitions in copolymers of 2‐(o‐chlorophenyl)‐4‐methylene‐1,3‐dioxolane with vinyl monomers

Copolymers of 2‐(o‐chlorophenyl)‐4‐methylene‐1,3‐dioxolane with methyl methacrylate and styrene were synthesized in benzene at 85 °C in the presence of 2,2′‐azobisisobutyronitrile as initiator. The structure of the resulting copolymers was investigated and a polymerization mechanism was proposed. The intrinsic viscosity of the copolymers in dilute solutions of carbon tetrachloride was determined as a function of temperature and conformational transitions were investigated. Copyright © 2004 Society of Chemical Industry     

Using aluminium triflate as a co‐catalyst for the polymerization of o‐phenylenediamine and its derivatives

Aromatic diamine monomers, including o‐phenylenediamine (oPD), 4‐methyl‐o‐phenylenediamine (4Me‐oPD), 4,5‐dimethyl‐o‐phenylenediamine (dMe‐oPD) and 4‐(tert‐butyl)‐o‐phenylenediamine (tBu‐oPD), were polymerized by chemical oxidation using ammonium persulfate as an oxidant. Aluminium triflate (Al(OTf)₃) was also used for the first time as a co‐catalyst under various reaction conditions for the polymerization of oPD derivatives. The polymerization yield was improved when Al(OTf)₃ was introduced to the polymerization reaction for most polymers. The solubility of poly(4‐methyl‐o‐phenylenediamine) (P(4Me‐oPD)), poly(4,5‐dimethyl‐o‐phenylenediamine) (P(dMe‐oPD)) and poly(4‐(tert‐butyl)‐o‐phenylenediamine) (P(tBu‐oPD)) polymers was improved compared with the poly(o‐phenylenediamine) (P(oPD)) polymers in most common solvents. The homopolymers obtained were characterized by Fourier transform IR spectroscopy, UV?visible spectroscopy, ¹H and ¹³C NMR, wide‐angle X‐ray diffraction, DSC and TGA. The results showed that the yield, solubility and structure of the polymers are significantly dependent on the polymerization conditions. DSC measurements indicated that the polymers exhibited melting and crystallization transitions. The polymers also showed good thermal stability and decompose above 400 °C in nitrogen. © 2013 Society of Chemical Industry     

Synthesis and characterization of poly(o‐anisidine)/V2O5 and poly(o‐anthranilic acid)/V2O5 nanocomposites

Poly(o‐anisidine)/V₂O₅ and poly(o‐anthranilic acid)/V₂O₅ nanocomposites were prepared by in situ intercalative polymerization, and the structure and electrical properties of these nanocomposites were investigated using GPC, TGA, XRD, TEM, FTIR, UV‐vis as well as conductivity measurement. The results show that the steric effect and nature of the substituting groups in the aromatic ring has an influence on the structure and electrical properties of the nanocomposites. Poly(o‐anisidine) or poly(o‐anthranilic acid) exists as a monolayer of outstretched chains in the gallery of the V₂O₅ xerogel owing to the confined environment in the nanometer‐size gallery. And intercalation of poly(o‐anisidine) or poly(o‐anthranilic acid) can improve the conductivity of V₂O₅ xerogel. Copyright © 2005 Society of Chemical Industry     

Nitroxide‐terminated poly(styrene‐co‐diethyl fumarates) and derived block copolymers

Copolymerization of styrene (S) and diethyl fumarate (DEF) at 125°C in the presence of 2,2,6,6‐ tetramethylpiperidin‐1‐yloxyl radical (TEMPO) and initiated with a thermal initiator, 2,2′‐azobisisobutyronitrile (AIBN), was studied. The molar fraction of DEF in the feed, F_DEF, varied within 0.1–0.9. An azeotropic composition, (F_DEF)_A = 0.38, was found for the copolymerization under study. At F_DEF = 0.1–0.4, a quasi‐living process was observed, transforming to a retarded conventional radical copolymerization at a higher content of DEF in the initial mixtures. The obtained TEMPO‐terminated S‐DEF copolymers were used to initiate polymerization of styrene. Poly(styrene‐ co‐diethyl fumarate)‐block‐polystyrene copolymers were prepared with molecular weight distributions depending on the amount of inactive polymer chains in macroinitiators, as indicated by size‐exclusion chromatography. A limited miscibility of the blocks in the synthesized block copolymers was revealed by using differential scanning calorimetry. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2432–2439, 2002     

Preparation and application of sulfonated poly(1‐octene‐co‐styrene)

In this article, 1‐octene and styrene was copolymerized by the supported catalyst (TiCl₄/ID/MgCl₂). Subsequently, by sulfonation reaction, sulfonated poly(1‐octene‐co‐styrene)s which were amphiphilic copolymers were prepared. The copolymerization behavior between 1‐octene and styrene is moderate ideal behavior. Copolymers prepared by this catalyst contain appreciable amounts of both 1‐octene and styrene. Increase in the feed ratio of styrene/1‐octene leads to increase in styrene content in copolymer and decrease in molecular weight. As the polymerization temperature increases, the styrene content in the copolymers increases, however, the molecular weight decreases. Hydrogen is an efficient regulator to lower the molecular weights of poly(1‐octene‐co‐styrene)s. The sulfonation degree of the sulfonated poly(1‐octene‐co‐styrene)s increased as the styrene content in copolymer increased or the molecular weight decreased. Thirty‐six hour is long enough for sulfonation reaction. The sulfonated poly(1‐octene‐co‐styrene)s can be used as effective and durable modifying agent to improve the wettability of polyethylene film and have potential application in emulsified fuels and for the stabilization of dispersions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Anthranilic acid assisted preparation of Fe3O4–poly(aniline‐co‐o‐anthranilic acid) nanoparticles

Magnetic Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles were prepared by a novel and simple method: anthranilic acid assisted polymerization. The synthetic strategy involved two steps. First, Fe₃O₄ nanoparticles capped by anthranilic acid were obtained by a chemical precipitation method, and then the aniline and oxidant were added to the modified Fe₃O₄ nanoparticles to prepare well‐dispersed Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles. Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles exhibited a superparamagnetic behavior (i.e., no hysteresis loop) and high‐saturated magnetization (M_s = 21.5 emu/g). The structure of the composite was characterized by Fourier‐transform infrared spectra, X‐ray powder diffraction patterns, and transmission electron microscopy, which proved that the Fe₃O₄–poly(aniline‐co‐o‐anthranilic acid) nanoparticles were about 20 nm. Moreover, the thermal properties of the composite were evaluated by thermogravimetric analysis, and it showed excellent thermal stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1666–1671, 2006     

Remarkable improvement of thermal stability of main‐chain benzoxazine oligomer by incorporating o‐norbornene as terminal functionality

A new main‐chain benzoxazine oligomer with o‐norbornene functionality as end groups has been designed and synthesized. As compared to traditional main‐chain type benzoxazine polymers, this benzoxazine oligomer with o‐norbornene terminal functionality can undergo further crosslinking polymerization after general ring‐opening polymerization of oxazine rings. Another main‐chain benzoxazine oligomer has also been designed based on the reaction of bisphenol‐A, 4,4′‐diaminodiphenylmethane, paraformaldehyde, and phenol for comparison. The structure of the synthesized oligomers is confirmed by ¹H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy (FTIR). The molecular weight has been determined by using gel permeation chromatography (GPC). The benzoxazine oligomer containing o‐norbornene functionality can polymerize with multiple polymerization mechanisms rather than the single mechanism common to traditional 1,3‐benzoxazine resins. The polymerization mechanisms are monitored by in situ FTIR and differential scanning calorimetry (DSC). Moreover, the thermoset derived from the benzoxazine oligomer containing o‐norbornene functionality exhibits high thermal stability with the transition temperature of 360 °C and a high T_d5 of 404 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45408.     

Nitroxide‐mediated synthesis of styrenic‐based segmented and tapered block copolymers using poly(lactide)‐functionalized TEMPO macromediators

Poly(styrene)‐poly(lactide) (PS‐PLA), poly (tert‐butyl styrene)‐poly(lactide) (PtBuS‐PLA) diblocks, and poly(tert‐butyl styrene)‐poly(styrene)‐poly(lactide) (PtBuS‐PS‐PLA) segmented and tapered triblocks of controlled segment lengths were synthesized using nitroxide‐mediated controlled radical polymerization. Well‐defined PLA‐functionalized macromediators derived from hydroxyl terminated TEMPO (PLA_T) of various molecular weights mediated polymerizations of the styrenic monomers in bulk and in dimethylformamide (DMF) solution at 120–130°C. PS‐PLA and PtBuS‐PLA diblocks were characterized by narrow molecular weight distributions (polydispersity index (M_w/M_n) < 1.3) when using the PLA_T mediator with the lowest number average molecular weight M_n= 6.1 kg/mol while broader molecular weight distributions were exhibited (M_w/M_n = 1.47‐1.65) when using higher molecular weight mediators (M_n = 7.4 kg/mol and 11.3 kg/mol). Segmented PtBuS‐PS‐PLA triblocks were initiated cleanly from PtBuS‐PLA diblocks although polymerizations were very rapid with PS segments ～ 5–10 kg/mol added within 3–10 min of polymerization at 130°C in 50 wt % DMF solution. Tapering from the PtBuS to the PS segment in semibatch mode at a lower temperature of 120°C and in 50 wt % DMF solution was effective in incorporating a short random segment of PtBuS‐ran‐PS while maintaining a relatively narrow monomodal molecular weight distribution (M_w/M_n ≈ 1.5). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

Potent,Metabolically Stable 2‐Alkyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐adenines as Adenosine A2A Receptor Ligands

Inhibition of adenosine A_2A receptors has been shown to elicit a therapeutic response in preclinical animal models of Parkinson’s disease (PD). We previously identified the triazolo‐9H‐purine, ST1535, as a potent A_2AR antagonist. Studies revealed that ST1535 is extensively hydroxylated at the ω‐1 position of the butyl side chain. Here, we describe the synthesis and evaluation of derivatives in which the ω‐1 position has been substituted (F, Me, OH) in order to block metabolism. The stability of the compounds was evaluated in human liver microsomes (HLM), and the affinity for A_2AR was determined. Two compounds, (2‐(3,3‐dimethylbutyl)‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐6‐amine ( 3 b ) and 4‐(6‐amino‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐2‐yl)‐2‐methylbutan‐2‐ol ( 3 c ), exhibited good affinity against A_2AR (K_i=0.4 nM and 2 nM , respectively) and high in vitro metabolic stability (89.5 % and 95.3 % recovery, respectively, after incubation with HLM for two hours).     

Bio‐Based Hybrid Magnetic Latex Particles Containing Encapsulated γ ‐Fe2O3 by Miniemulsion Copolymerization of Soybean Oil‐Acrylated Methyl Ester and Styrene

This work reports the use of acrylated fatty acid methyl ester (AFAME) as a biomonomer for the synthesis of bio‐based hybrid magnetic particles poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ produced by miniemulsion polymerization. Poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ can be tailored for use in various fields by varying the content of AFAME. The strategy employed is to encapsulate superparamagnetic iron oxide nanoparticles (SPIONs) as γ‐Fe₂O₃ into a styrene/AFAME‐based copolymer matrix. Raman spectroscopy is employed to ensure the formation of the SPIONs (γ‐Fe₂O₃) obtained by a co‐precipitation technique followed by oxidation of Fe₃O₄. The functionalization of SPIONs with oleic acid (OA) is carried out to increase the SPIONs–monomer affinity. The presence of OA on the surface of γ‐Fe₂O₃ is certified by identification of main absorption bands by fourier‐transform infrared spectroscopy (FTIR). Thermal analysis (differential thermogravimetry/differential thermo analysis and differential scanning calorimetry) results of poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ show an increase in AFAME content leading to a lower copolymer glass transition temperature (T _g). Dynamic light scattering (DLS) measurements result in poly(styrene‐co‐AFAME)/γ‐Fe₂O₃ particles with diameter in the range of 100–150 nm. It is also observed by transmission electron microscopy (TEM) and cryo‐TEM techniques that γ‐Fe₂O₃ particles are successfully encapsulated into the poly(styrene‐co‐AFAME) matrix.     

Atom transfer radical polymerization grafting of highly functionalized polystyrene and poly(4‐methylstyrene) macroinitiators with tert‐butyl acrylate

Two monodisperse graft copolymers, poly(4‐methylstyrene)‐graft‐poly(tert‐butyl acrylate) [number‐average molecular weight (M_n) = 37,500, weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.12] and polystyrene‐graft‐poly(tert‐butyl acrylate) (M_n = 72,800, M_w/M_n = 1.12), were prepared by the atom transfer radical polymerization of tert‐butyl acrylate catalyzed with Cu(I) halides. As macroinitiators, poly{(4‐methylstyrene)‐co‐[(4‐bromomethyl)styrene]} and poly{styrene‐co‐[4‐(1‐(2‐bromopropionyloxy)ethyl)styrene]}, carrying 40% of the bromoalkyl functionalities along the chain, were used. The dependencies of molecular parameters on monomer conversion fulfilled the criteria for controlled polymerizations. In contrast, the dependencies of monomer conversion versus time were nonideal; possible causes were examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2930–2936, 2002     

Surface‐active amphiphilic poly[(2‐acrylamido‐2‐methylpropanesulfonic acid)‐co‐(N‐isopropylacrylamide)] nanoparticles as stabilizer in aqueous emulsion polymerization

This work reports the effect of nanogel solid particles on the surface and interfacial tension of water/air and water/styrene interfaces. Moreover, the work aimed to use nanogels as a stabilizer for miniemulsion aqueous polymerization. A series of amphiphilic crosslinked N‐isopropylacrylamide (NIPAm) and 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) copolymer nanogels were synthesized based on an aqueous copolymerization batch method. Divinylbenzene and N,N‐methylene bisacrylamide were used as crosslinkers. The morphologies of the prepared nanogels were investigated using transmission and scanning electron microscopies. The lower critical transition temperatures were determined using differential scanning calorimetry. The surface tension of colloidal NIPAm/AMPS dispersions was measured as functions of surface age, temperature and the morphology of the NIPAm/AMPS nanogels. The NIPAm/AMPS nanogels reduced the surface tension of water to about 30.1 mN m^?1 at 298 K with a small increase at 313 K. Surface activities of these nanogels in water were determined by surface tension measurements. The NIPAm/AMPS dispersions had high surface activity and were used as a stabilizer to prepare a crosslinked poly(styrene‐co‐AMPS) microgel based on emulsion crosslinking polymerization. © 2013 Society of Chemical Industry     

Influence of the comonomers (styrene and methyl acrylate) on the rate of photocrosslinking of 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}‐ phenyl acrylate

[2,6‐Bis(4‐hydroxybenzylidene)cyclohexanone] (HBC) was prepared by reacting cyclohexanone and p‐hydroxybenzaldehyde in the presence of acid catalyst. Acrylated derivative of HBC, 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA), was prepared by reacting HBC with acryloyl chloride in the presence of triethylamine. Copolymers of HBA with styrene (S) and methyl acrylate (MA) of different feed compositions were carried out by solution polymerization technique by using benzoyl peroxide (BPO) under nitrogen atmosphere. All monomers and polymers were characterized by using IR and NMR techniques. Reactivity ratios of the monomers present in the polymer chain were evolved by using Finnman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (ex‐KT) methods. Average values of reactivity were achieved by the following three methods: r₁ (S) = 2.36 ± 0.45 and r₂ (HBA) = 0.8 ± 0.31 for poly(S‐co‐HBA); r₁ = 1.62 ± 0.06 (MA); and r₂ = 0.12 ± 0.07 (HBA) for poly(MA‐co‐HBA). The photocrosslinking property of the polymers was done by using UV absorption spectroscopic technique. The rate of photocrosslinking was enhanced compared to that of the homopolymers, when the HBA was copolymerized with S and MA. Thermal stability and molecular weights (M_w and M_n) were determined for the polymer samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2494–2503, 2004     

Preparation of poly(styrene‐b‐2‐hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization

Reverse iodine transfer polymerizations (RITP) of 2‐h‐ydroxyethyl acrylate (HEA) were performed in N,N‐dimethylformamide at 75°C using AIBN as initiator. Poly(2‐hydroxyethyl acrylate) (PHEA) with M_n = 3300 g mol^?1 and M_w/M_n <1.5 were obtained. Homopolymerization of styrene in RITP was also carried out under similar conditions using toluene as solvent. The resulting iodo‐polystyrene (PS‐I) with (M_{n, SEC} = 607 g mol^?1, polydispersity index (PDI) = 1.31) was used as a macroinitiator for the synthesis of amphiphilic block copolymers based on HEA with controlled well‐defined structure. Poly(styrene‐b‐2‐hydroxyethyl acrylate) (PS‐b‐PHEA) with M_n = 13,000 g mol^?1 and polydispersity index (M_w/M_n) = 1.4 was obtained, copolymer composition was characterized using ¹H‐NMR and FTIR, whereas SEC and gradient HPLC were used to confirm the formation of block copolymer and the living character of polymer chains. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of ultra‐high molecular weight polystyrene with rare earth–magnesium alkyl catalyst system: general features of bulk polymerization

Bulk polymerization of styrene (St) with an in‐situ‐activated Ziegler‐catalyst containing neodymium 2‐ethylhexyl phosphonate [Nd(P₂₀₄)₃], magnesium–aluminum alkyls and hexamethyl phosphoramide (HMPA) was studied. The new rare‐earth catalyst exhibited high activity for polymerization of styrene, and its catalytic efficiency reached 14 730 g PSt/g Nd. The influence of reaction parameters, such as Mg/Nd, Mg/Al, St/Nd molar ratios, temperature, etc, on the catalyst performance was examined in detail. The molecular weight of the resulting polystyrene is ultra‐high (M_W = 40 × 10⁴ ∼ 120 × 10⁴ g mol⁻¹) and the distribution of molecular weight is broad (M_W/M_n = 2.1 ∼ 2.8). The microstructure of the polystyrene was characterized by IR and ¹³C NMR spectroscopies and found to be atactic. © 2001 Society of Chemical Industry