Reversible addition–fragmentation chain transfer polymerization of styrene with benzoimidazole dithiocarbamate as a reversible addition–fragmentation chain transfer agent

Two novel dithiocarbamates [2‐Y‐benzoimidazole‐1‐carbodithioic acid benzyl esters: Y = methyl (1b) or phenyl (1c)] were synthesized and successfully used in the reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene in bulk with thermal initiation. The effects of the temperatures and concentration ratios of the styrene and RAFT agents on the polymerization were investigated. The results showed that the polymerization of styrene could be well controlled in the presence of 1b or 1c. The linear relationships between ln([M]₀/[M]) and the polymerization time (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) indicated that the polymerizations were first‐order reactions with respect to the monomer concentration. The molecular weights increased linearly with the monomer conversion and were close to the theoretical values. The molecular weight distributions [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] were very narrow from 5.3% conversion up to 94% conversion (M_w/M_n < 1.3). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 560–564, 2006     

Reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene using novel heterocycle‐containing chain transfer agents

BACKGROUND: Controlled/‘living’ radical polymerization is a new and robust method to synthesize polymers with predetermined molecular weight, narrow polydispersity and tailored architecture. Several methods have been developed but reversible addition‐fragmentation chain transfer (RAFT) has several advantages over the other methods. It has been reported that the effectiveness of RAFT agents depends strongly on the nature of the Z and R groups. RESULTS: Three new dithiocarbamates, namely (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrrole‐1‐carbodithioate (CTA‐A), (1‐phenyl ethyl)‐pyrazole‐1‐carbodithioate (CTA‐B) and (2‐ethoxy carbonyl)‐prop‐2‐yl‐pyrazole‐1‐carbodithioate (CTA‐C), were synthesized for studying the effect of the Z and R group of a chain transfer agent on the RAFT polymerization of styrene, initiated by 2,2′‐azobisisobutyronitrile. Well‐controlled molecular weight with narrow polydispersity (1.10–1.46) was achieved. The increase in molecular weight with conversion is linear and follows first‐order kinetics. CONCLUSION: The detailed kinetic results show that the structure of the activating (Z) group of dithiocarbamates has significant effects on the reactivity of dithiocarbamates towards the polymerization of styrene. In the homopolymerization of styrene it was found that, from the polydispersity index of polystyrenes obtained and the kinetic results, the pyrazole‐based dithiocarbamates (CTA‐B and CTA‐C) are very effective compared to the pyrrole‐based dithiocarbamate (CTA‐A). All the polymerizations show controlled living characters. Copyright © 2007 Society of Chemical Industry     

Modeling analysis of chain transfer in reversible addition‐fragmentation chain transfer polymerization

The validity of simplifying the reversible addition‐fragmentation chain transfer (RAFT) polymerization as a degenerative chain transfer process was verified in this work. The simplified chain transfer mechanism enabled the direct modeling investigation of chain transfer coefficient in the RAFT polymerization. It also gave the analytical expressions for concentration, chain length, and polydispersity of various chain species. The comparison between the simulations based on chain transfer mechanism and those from general RAFT mechanism showed that this simplified mechanism can accurately predict RAFT polymerization in the absence of side reactions to adduct radicals other than fragmentation. However, significant errors are introduced at high conversion when side reactions to adduct are present. The chain transfer coefficient of RAFT agent is the key factor in RAFT polymerization. The polydispersity is more sensitive to chain transfer coefficient at low conversion. At high conversion, however, the polydispersity is mainly determined by termination, which can be controlled by RAFT agent concentration and the selection of initiator. At last, an analytical equation is derived to directly estimate chain transfer coefficient of RAFT agent from the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synthesis of polydimethylsiloxane‐containing block copolymers via reversible addition fragmentation chain transfer (RAFT) polymerization

Low polydispersity polydimethylsiloxane (PDMS) was end functionalized with a reversible addition fragmentation chain transfer (RAFT) agent by the esterification of hydroxyl terminated PDMS with a carboxylic acid functional RAFT agent. These PDMS‐RAFT agents were able to control the free radical polymerization of styrene and substituted styrene monomers to produce PDMS‐containing block copolymers with low polydispersities and targeted molecular weights. A thin film of polydimethylsiloxane‐block‐polystyrene was prepared by spin coating and exhibited a microphase separated morphology from scanning force microscopy measurements. Controlled swelling of these films in solvent vapor produced morphologies with significant long‐range order. This synthetic route will allow the straightforward production of PDMS‐containing block copolymer libraries that will be useful for investigating their thin film morphological behavior, which has applications in the templating of nanostructured materials.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation of poly(tert‐butyl acrylate)‐poly(acrylic acid) amphiphilic copolymers via radiation‐induced reversible addition–fragmentation chain transfer mediated polymerization of tert‐butyl acrylate

Poly(tert‐butyl acrylate) (PtBA) is a versatile hydrophobic macromolecule usually preferred in the development of new materials for a host of applications. PtBA homopolymers with well‐defined structure and controlled molecular weight in a wide range were successfully synthesized via radiation‐induced reversible addition–fragmentation chain transfer (RAFT) polymerization in the presence of a trithiocarbonate type RAFT agent. The polymerization of tBA was performed under ⁶⁰Co γ‐irradiation in the presence of 2‐(dodecylthiocarbonothioylthio)‐2‐methylpropionic acid (DDMAT) as the RAFT agent in toluene at room temperature with three [tBA]/[DDMAT] ratios (400, 600 and 1000) and different irradiation times. Radiation‐induced polymerization of tBA displayed controlled free radical polymerization characteristics: a narrow molecular weight distribution (M_w/M_n ~ 1.1), pseudo first order kinetics and controlled molecular weights. The system followed the RAFT polymerization mechanism even at very low amounts of RAFT agent ([tBA]/[DDMAT] = 1000), and molecular weights up to 113 900 with narrow dispersity (Ð =1.06) were obtained. PtBA was further hydrolysed into different amphiphilic PtBA‐co‐poly(acrylic acid) (PAA) copolymers by low (27.5%) and high (77.3%) degrees of hydrolysis. The pH sensitivity of the two copolymers was investigated by dynamic light scattering at pH 2 and pH 9 (above and below the pK_a value of PAA) and their hydrodynamic diameters and zeta potential values were determined. © 2020 Society of Chemical Industry     

Grafting of poly(acrylic acid) onto poly(amidoamine)-functionalized graphene oxide via surface-mediated reversible addition-fragmentation chain transfer polymerization

Graphene oxide was modified with third-generation poly(amidoamine) (PAMAM) to obtain dendrimer-grafted GO (DGO) with high content of functional groups. DGO's amine groups were conjugated with S-(thiobenzoyl)thioglycolic acid as proved by XPS and poly(acrylic acid) was grafted onto surface via RAFT polymerization (DGO@PAA). FT-IR results approved the synthesis of samples whereas TGA revealed 40.3% grafting of PAA. XRD patterns showed that with further modification, d-spacing increased. According to Raman spectra, modification resulted in more disordered structure whereas DGO@PAA showed a high value of I_D/I_G. Morphological studies were performed by SEM and TEM that showed a polymeric layer covered the surface of nanosheets.     

Functionalization of poly(ester‐urethane) surface by radiation‐induced grafting of N‐isopropylacrylamide using conventional and reversible addition–fragmentation chain transfer‐mediated methods

The functionalization of poly(ester‐urethane) (PUR) surface was conducted using radiation‐induced grafting. A thermosensitive layer constructed from N‐isopropylacrylamide (NIPAAm) was introduced onto a polyurethane film and characterized using attenuated total reflection Fourier transform infrared and X‐ray photoelectron spectroscopies and contact angle measurements. Size exclusion chromatography was used to analyse the PUR‐graft‐PNIPAAm copolymers and homopolymers formed in solution. Additionally, reversible addition–fragmentation chain transfer (RAFT) polymerization was performed in order to obtain PNIPAAm‐grafted surfaces with well‐defined properties. Atomic force microscopy was used to evaluate the surfaces synthesized via conventional and RAFT‐mediated grafting methods. The results of various techniques confirmed the successful grafting of NIPAAm from PUR film. © 2015 Society of Chemical Industry     

Influence of reaction parameters on the synthesis of hyperbranched polymers via reversible addition fragmentation chain transfer (RAFT) polymerization

The synthesis of hyperbranched poly(methyl methacrylate) (PMMA) via reversible addition fragmentation chain transfer (RAFT) polymerization was investigated by varying the ratio chain transfer agent (CTA): monomer (methyl methacrylate, MMA): brancher (ethylene glycol dimethyl methacrylate, EGDMA): free radical initiator (AIBN) at various temperatures (50, 55, 60, 65, 70 °C). The rate of polymerization was observed to increase with temperature and concentration in brancher, whilst it was lowered by an increase in chain transfer agent concentration. The molecular weight of the samples increased with the ratios brancher: CTA and monomer: CTA. The polydispersity of the samples increase with conversion, as the level of branching increases. At fixed concentration in brancher, an increase of CTA concentration led to polymers with lower PDI. The variation of enthalpy and entropy relative to the monomer reaction were calculated, and it was observed that an increase in the brancher concentration induced an increase in both and , whilst lower CTA concentrations led to an increase in . The variation in Gibbs energy for the monomer reaction was calculated at 60 °C, and results confirmed the presence of a retardation effect when increasing CTA concentration generally observed in RAFT polymerization.     

Preparation and properties of poly(ethylene oxide) star polymers

Poly(ethylene oxide) (PEO) star polymers were prepared by anionic polymerization of methacryloyl chloride and glyceryl trimethacrylate with sec‐butyllithium in cyclohexane. The ensuing polymers were grafted with poly(ethylene glycol) of molecular weight 400. The final product was washed with methylene chloride and analyzed with infrared spectroscopy, differential scanning calorimetry, and thermogravimetry. Star polymers of PEO were also prepared by anionic polymerization of glycidol with sec‐butyllithium in cyclohexane. The initiator was chosen so as to yield a polymer of 10,000 molecular weight. The resulting polymers were analyzed by nuclear magnetic resonance, infrared spectroscopy, and thermogravimetry. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 322–327, 2003     

Surface grafting of poly(pentafluorostyrene) on the iron and iron oxide particles via reversible addition fragmentation chain transfer (RAFT) polymerization

A surface grafting technique is reported for synthesis of poly(pentafluorostyrene) via reversible addition fragmentation chain transfer onto iron (iron oxide) particles. 4‐Methoxydithiobenzoate is used for the RAFT chain transfer agent. The molecular weight, surface morphology, thickness, thermal properties, and monomer conversion of the grafted polymer are reported. The grafted poly(pentafluorostyrene)–iron particles show a higher thermal transition temperature compared to the nongrafted polymer because it is speculated that the covalent bond between the polymer backbone and the surface of the iron particles restricts the molecular mobility. The monomer conversion increases in proportion to the amount of chain transfer agent (CTA) concentration at early polymerization time. The grafted poly(pentafluorostyrene) shows a “hairy” like polymer architecture with fibril thickness in the range of 80 to 100 nm. A thin coating is expected to maintain the magnetic saturation properties of iron particles. To the best of our knowledge, this is the first time that poly(pentafluorostyrene) has been grafted onto the iron particles utilizing RAFT and 4‐methoxydithiobenzoate as a CTA. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44898.     

Effect of poly(ethylene glycol) on the solid‐state polymerization of poly(ethylene terephthalate)

Poly(ethylene glycol) (PEG) and end‐capped poly(ethylene glycol) (poly(ethylene glycol) dimethyl ether (PEGDME)) of number average molecular weight 1000 g mol^?1 was melt blended with poly(ethylene terephthalate) (PET) oligomer. NMR, DSC and WAXS techniques characterized the structure and morphology of the blends. Both these samples show reduction in T_g and similar crystallization behavior. Solid‐state polymerization (SSP) was performed on these blend samples using Sb₂O₃ as catalyst under reduced pressure at temperatures below the melting point of the samples. Inherent viscosity data indicate that for the blend sample with PEG there is enhancement of SSP rate, while for the sample with PEGDME the SSP rate is suppressed. NMR data showed that PEG is incorporated into the PET chain, while PEGDME does not react with PET. Copyright © 2005 Society of Chemical Industry     

Effect of monomer composition on apparent chain transfer coefficient in reversible addition fragmentation transfer (RAFT) copolymerization

The effects of monomer composition on the apparent chain transfer coefficient (〈C_tr〉) in reversible addition fragmentation transfer (RAFT) copolymerization were investigated. The studied RAFT systems included methyl methacrylate (MMA)/butyl acrylate (BA) mediated by 1-phenylethyl phenyldithioacetate (PEPDTA) (i.e. MMA/BA-PEPDTA), MMA/BA by 2-cyanoprop-2-yl dithiobenzoate (i.e. MMA/BA-CPDTB), and styrene (St)/BA by benzyl dithioisobutyrate (i.e. St/BA-BDTiB). The R groups of the RAFT agents were first converted to the corresponding copolymer oligomers having the same composition to facilitate the measurement of the main RAFT equilibrium transfer coefficients. It was found that there exist minimum values in the 〈C_tr〉 ∼ f₁ curves in MMA/BA-CPDTB and St/BA-BDTiB at f₁ = 0.75 and 0.25, respectively. The apparent transfer coefficients of the copolymerization systems within some composition range were lower than their homopolymerization values. The lower 〈C_tr〉 values resulted in broader copolymer molecular weight distributions. The composition dependence of 〈C_tr〉 was determined by the comonomer reactivity ratios and the Z group functionality of the RAFT agent. The experimental data could be well described by a simple equation derived from the terminal model:

     

Kinetics of RAFT emulsion polymerization of styrene mediated by oligo(acrylic acid‐b‐styrene) trithiocarbonate

The kinetics of ab initio reversible addition‐fragmentation chain transfer (RAFT) emulsion polymerization of styrene using oligo(acrylic acid‐b‐styrene) trithiocarbonate as both polymerization mediator and surfactant were systematically investigated. The initiator concentration was set much lower than that in the conventional emulsion polymerization to significantly suppress the irreversible termination reaction. It was found that decreased rapidly but the nucleation efficiency of micelles increased with the decrease of the initiator concentrations due to the significant radical exit. The particle number ( ) did not follow the classic Smith–Eward equation but was proportional to [I]^?0.4[S]^0.7. It was suggested that RAFT emulsion polymerization could be fast enough for commercial use even at extremely low initiator concentrations and low macro‐RAFT agent concentrations due to the higher particle nucleation efficiency at lower initiator concentration. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2126–2134, 2016     

Surface immobilization of star‐shaped poly(ethylene oxide) on poly(dimethylsiloxane)

A thin layer of star‐shaped poly(ethylene oxide) (PEO) (starPEO), on the polydimethylsiloxane (PDMS) membrane was prepared by a simple immobilization procedure. Photoreactive molecules were introduced on the surface of the polymeric support to achieve the formation of thin starPEO film from the materials having no functional groups. This novel technique enabled us to immobilize any kind of chemical, especially one that had no functional groups, and readily to control the amount of immobilization. The gas permeation properties of the starPEO‐immobilized PDMS membranes were investigated for pure propane and propylene. The permeance of gases were found to decrease in the starPEO‐immobilized PDMS membranes, although the ideal separation factors for propylene/propane were increased with the loading amount of silver ions, because of the facilitation action of silver ions in the immobilized PEO unit on the PDMS membranes, as propylene carriers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2369–2373, 2002     

Nanoencapsulation via interfacially confined reversible addition fragmentation transfer (RAFT) miniemulsion polymerization

Oligomer of styrene and maleic anhydride synthesized by bulk RAFT polymerization (SMA-RAFT) was used to construct a novel strategy for robust nanoencapsulation via interfacially confined controlled/living radical miniemulsion polymerization. After ammonolysis, SMA-RAFT becomes amphiphilic and can be used as a surfactant to prepare miniemulsion. The ammonolyzed SMA-RAFT molecules would self-assemble on the interface of water/droplets. This self-assembly property combining with the RAFT living polymerization chemistry demands the polymer chains to grow inwards gradually in particles, leading to the formation of a polymer shell. The hydrophilicity of ammonolyzed SMA-RAFT agent tuned by the ammonolyzed degree or structures of SMA-RAFT agent was found to play a key role in the final morphology. The well-defined nanocapsules with little solid particles can be obtained by using partially ammonolyzed SMA-RAFT with 0.5 wt% SDS as a co-surfactant.     

Ab initio reversible addition–fragmentation chain transfer emulsion polymerization of styrene/butyl acrylate mediated by poly(acrylic acid)‐block‐polystyrene trithiocarbonate

Ab initio reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of styrene/butyl acrylate was investigated with the trithiocarbonate macro‐RAFT agent poly(acrylic acid)‐block‐polystyrene (PAA‐b‐PS) as a stabilizer and a RAFT agent. Influences of the amount of ammonium persulfate (APS), the amount of PAA‐b‐PS and the mass ratio of monomers on emulsion polymerization and film properties are discussed. The particle morphology exhibited spherical‐like structure with particles of about 90 nm in diameter and relatively narrow particle size distribution characterized using transmission electron microscopy and dynamic laser scattering. Fourier transform infrared and ¹H NMR spectra showed that the styrene/butyl acrylate emulsion was successfully synthesized. The monomer conversion increased initially with increasing amount of APS, from 0.4 up to 0.8 wt%, and then decreased. The particle size increased and its distribution decreased gradually with increasing amount of APS. The monomer conversion increased from 76.83 to 94.21% as the amount of PAA‐b‐PS increased from 3 to 4 wt%, and then decreased with further increase of PAA‐b‐PS. The particle size decreased and its distribution increased with increasing amount of PAA‐b‐PS. The water resistance and solvent resistance of the polymer films initially increased and then decreased with decreasing mass ratio of butyl acrylate to styrene. © 2014 Society of Chemical Industry     

Phase separation phenomena in aqueous solutions of amphiphilic poly(ethylene oxide) star polymers

Three- and four-armed star polymers with poly(ethylene oxide) arms capped with hydrophobic end-groups were synthesized from nonylphenoxypoly(ethylene glycol)s and well defined tri- and tetraisocyanates. The latter were hydrosilylation products of m-isopropenyl-,-dimethylbenzyl isocyanate (m-TMI). In aqueous solution the arm ends associate, and above a critical star concentration the mixture phase separates into a dilute phase and a condensed gel phase. Their respective polymer concentrations remain constant as long as the two phases coexist, their volume fractions being proportional to the total polymer concentration. Brookfield viscosity measurements confirm the formation of the gel phase which resembles an amphiphilic hydrogel. It exhibits a high affinity for hydrophobic compounds.     

Emulsifier‐free reversible addition–fragmentation chain transfer emulsion polymerization of alkyl acrylates mediated by symmetrical trithiocarbonates based on poly(acrylic acid)

Emulsifier‐free batch emulsion polymerization of n‐butyl acrylate and its semi‐batch copolymerization with 2,2,3,3,4,4,5,5‐octafluoropentyl acrylate and 2,2,3,4,4,4‐hexafluorobutyl acrylate both mediated by poly(acrylic acid) containing the trithiocarbonate group in the chain was employed to produce amphiphilic triblock copolymers. The polymerization‐induced self‐assembly of these copolymers in aqueous media gave rise to spherical core–shell particles. Irrespective of the experimental conditions, the polymeric product was characterized by a bimodal molecular weight distribution. The apparent violation of the reversible addition–fragmentation chain transfer polymerization mechanism may be attributed to restricted accessibility of the trithiocarbonate group in the self‐assembled block copolymers for propagating radicals that enter into the particle. Mean‐field theoretical arguments were employed to explain the exclusively spherical morphology of the particles observed in the experiment. © 2019 Society of Chemical Industry