Morphology and particle size of nanograde polyurethane/polyacrylate hybrid emulsions

Poly(urethane acrylate) (PUA) composite particles were prepared by seeded surfactant‐free emulsion polymerization. The aqueous polyurethane (PU) dispersions were used as seed particles. The diameters of the seed particles of the aqueous PU dispersions and PUA composite latexes were measured by dynamic light scattering. The microstructures of the PUA composite emulsion particles were observed by transmission electron microscopy. The influences of the amount of the hydrophilic chain extender, the types of initiators, and the PU/polyacrylate (PA) weight ratios on the diameters of the aqueous PU and composite emulsions were also studied. The results showed that the PUA composite emulsions formed a core–shell structure with PU as the shell and with PA as the core. The diameter of the PU seed particles and the particle size of the PUA composite emulsions greatly depended on the amounts of the hydrophilic chain extender used in the preparation of the PU seed; when the hydrophilic chain extender concentration was 7.4%, the average diameter of the PUA composite emulsion particles showed the minimum value. The types of initiators and PU/PA weight ratios did not have a significant influence on the diameter of the PUA composite latex particles. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

种子聚合法制备PS/PAA核壳微球的研究

设计制备了以疏水性聚苯乙烯(PS)为核、以亲水性聚丙烯酸(PAA)为壳的PS/PAA核壳结构复合微球。首先利用无皂乳液聚合法制备了亚微米级的PS微球,再以其为种子,利用种子无皂乳液聚合法制备PS/PAA核壳微球。在种子聚合阶段,选用AIBN当引发剂,经过红外光谱(IR)表征,表明当使用油溶性引发剂偶氮二异丁腈(AIBN),使其最终形成PS/PAA核壳结构微球。这种方法解决了亲水性较强的单体在以水为介质时在PS微球溶于少量的苯乙烯(St),并在引发聚合之前经过充分的吸附溶胀,可使亲水性单体AAc在PS种子微球表面聚合生成壳层,解决表面不容易直接聚合生成壳层的问题。     

Structure and property characterization of nanograde core‐shell polyurethane/polyacrylate composite emulsion

Anionic aqueous polyurethane dispersion was synthesized through self‐emulsifing method from cycloaliphatic isophorone diisocyanate (IPDI) and dimethylolpropionic acid (DMPA). The carboxyl acid group in DMPA was used to make the polyurethane dispersible. The polyurethane/polyacrylate (PU/PA) composite particles were also prepared by seeded surfactant‐free emulsion polymerization; the cycloaliphatic polyurethane aqueous dispersion was used as seed particles. The structures and properties of the composite emulsion as well as the physical mixture of polyurethane dispersion and polyacrylate emulsion were characterized by FTIR, DSC, dynamic light scattering, TEM, X‐ray photoelectron spectroscopy (ESCA), and electronic tensile machine. The results showed that the synthesized PU/PA composite emulsion was found to form inverted core‐shell structure with polyacrylate as the core and with polyurethane as the shell, and its diameter of particles is in the range of nanograde, the crosslinking reaction was existed in composite emulsion. The intimate molecular mixing of crosslinking polymers are also claims to result in a superior balance of properties compared to physical blends of polyurethane dispersion and acrylate emulsion. The crosslinking mechanism of PU/PA composite emulsion was also discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Particle morphology and NMR structure of polymethylmethacrylate/polystyrene emulsifier‐free core–shell cationic latices in the presence of DBMEA

In the absence of emulsifier, we prepared stable emulsifier‐free polymethylmethacrylate/polystyrene (PMMA/PSt) copolymer latex by batch method with comonomer N,N‐dimethyl, N‐butyl, N‐methacryloloxylethyl ammonium bromide (DBMEA) by using A1BN as initiator. The size distribution of the latex particles was very narrow and the copolymer particles were spherical and very uniform. Under the same recipe and polymerization conditions, PMMA/PSt and PSt/PMMA composite polymer particle latices were prepared by a semicontinuous emulsifier‐free seeded emulsion polymerization method. The sizes and size distributions of composite latex particles were determined both by quasi‐elastic light scattering and transmission electron microscopy (TEM). The effects of feeding manner and staining agents on the morphologies of the composite particles were studied. The results were as follows: the latex particles were dyed with pH 2.0 phosphotungestic acid solution and with uranyl acetate solution, respectively, revealing that the morphologies of the composite latex particles were obviously core–shell structures. The core–shell polymer structure of PMMA/PSt was also studied by ¹H, ¹³C, 2D NMR, and distortionless enhancement by polarization transfer, or DEPT, spectroscopy. Results showed that PMMA/PSt polymers are composed of PSt homopolymer, PMMA homopolymer, and PMMA‐g‐PSt graft copolymers; results by NMR are consistent with TEM results. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1681–1687, 2005     

New approach to hybrid materials: Functional sub-micrometer core/shell particles coated with NiS clusters by γ-irradiation

Functional sub-micrometer core/shell hybrid particles coated with inorganic components have many promising applications as new materials based on their multiphase structures with unusual features. Herein we demonstrate a novel approach to produce such particles with potential applications in the fields of magnetic materials. PSt seed latex was prepared through emulsion polymerization. Core-shell P(St-co-Am) particles with polyacryamide (PAm)-rich shell were formed through interfacial-initiated seeded emulsion polymerization. Then spherical P(St-co-AM)/NiS sub-micrometer composites were successfully prepared by the reaction of nickelous sulfate (NiSO₄) and thioacetamide (CH₃CSNH₂) under ⁶⁰Co γ-irradiation at ambient temperature and pressure. P(St-co-AM)/NiS hybrid particles were confirmed with electron microscopy, X-ray diffraction and X-ray photo-electron spectroscopy. The properties of P(St-co-Am) hybrid particles were studied with UV-vis spectroscopy, photoluminescence spectroscopy and magnetic hysteresis loop analysis.     

Core–shell latex particles consisting of polysiloxane–poly(styrene-methyl methacrylate-acrylic acid): Preparation and pore generation

Latexes with a poly(dimethyl siloxane) core and a poly(styrene-methyl methacrylate-acrylic acid) [poly(St-MMA-AA)] shell have been prepared in two steps in order to generate particles that have a core with a very low glass transition temperature. In the first step, poly(dimethyl siloxane) particles were obtained via the ring-opening emulsion polymerization of octamethyl tetracyclosiloxane (D₄). The polymerization was carried out using either an anionic or a cationic catalyst. In the first case, sodium hydroxide was used as catalyst and sodium dodecylbenzene sulfonate as surfactant, while in the second, the alkylbenzene sulfonic acid (ABSA) was used both as catalyst and surfactant. Using a PD₄ latex as seed, a seeded emulsion polymerization of St-MMA-AA was conducted to obtain PD₄–P(St-MMA-AA) core–shell particles. Numerous recipes were attempted and the most successful were those in which the seed was prepared with a cationic catalyst (ABSA) at a relatively low temperature (75°C). The core–shell structure of the particles was identified by transmission electron microscopy, but also via wetting angle, water absorption, and T_g measurements. Finally, pores were generated in the core–shell particles via an alkali–acid treatment. Because PD₄ has a very low glass transition temperature, it cannot be easily handled. However, protected by a shell, it could be used as a constituent of composite materials with enhanced impact strength, even at very low temperatures. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2235–2245, 1999     

Synthesis and characterization of poly(butyl acrylate–methyl methacrylate)/polyaniline core–shell latexes

Poly(butyl acrylate–methyl methacrylate) [P(BA–MMA]/polyaniline (PANI) core–shell complex particles were synthesized with a two‐step emulsion polymerization method with P(BA–MMA) as the core and PANI as the shell. The first step was to prepare P(BA–MMA) latex particles as the core via soapless emulsion polymerization. The second step was to prepare P(BA–MMA)/PANI core–shell particles. Sodium dodecyl sulfate was fed into the P(BA–MMA) emulsion as a surfactant, and this was followed by the addition of the aniline monomer. A bilayer structure of the surfactant over the surfaces of the core particles was desired so that the aniline monomer could be attracted near the outer surface of the core particles. In some cases, dodecyl benzene sulfonic acid was added after 2 h when the polymerization of aniline was started. The final product was the desired core–shell particles. The morphology of P(BA–MMA) and P(BA–MMA)/PANI particles was observed with transmission electron microscopy. The thermal properties were studied with thermogravimetric analysis and differential scanning calorimetry. Furthermore, conductive films made from the core–shell latexes were prepared, and the electrical conductivities of the films were studied. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 823–830, 2007     

Preparation and characterization of core–shell polystyrene–polydimethylsiloxane particles by seeded polymerization

Nanometer scale particles of seed latex were successfully prepared by polymerization induced by gamma rays. By modification of the coupling agent 3‐methacryloxylpropyltrimethoxylsilane (MPS) at the surface of polystyrene (PSt) particles, polydimethylsiloxane (PDMS) was introduced outside the PSt particles and composite latex particles with a core–shell (PSt–PDMS) structure were successfully prepared. Because of the chemical bond linkage between the core and the shell, such a structure is stable. Direct evidence of the core–shell structure was observed by transmission electron microscopy (TEM). In addition the chemical bond linkage was confirmed by Fourier‐transfer infrared (FT‐IR) spectroscopy. An indirect proof of the core–shell structure was given by water absorption ratio determination of the different samples. Copyright © 2004 Society of Chemical Industry     

Preparation and structure control of hollow polymer particles: Influence of seeded emulsion polymerization and alkalization treatment process

Hollow polymer latex particles containing a hydrophilic core were prepared by seeded emulsion polymerization with MAA/BA/MMA/St as comonomers, followed by stepwise alkalization treatment with ammonia. The size and morphology of composite latex particles was determined by TEM. The effects of the seeded emulsion polymerization conditions and alkalization treatment on the size and hollow structure of latex were investigated. The results showed that the optimum content of crosslinking agent in the shell polymers was about 0.5–1.0 wt %, emulsifier was about 0.8–1.1 wt %, and the core/shell weight ratio was 1/7. To obtain uniform hollow latex particles with large size, the starved feeding technique should be adopted in seeded emulsion polymerization, and the neutralization temperature should equal to the T_g of the shell polymer. Then, the obtained polymer particles under this condition had an excellent hollow structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Study on synthesis and morphology control of poly(4‐vinylpyridine‐co‐butyl acrylate)/poly(styrene‐co‐butyl acrylate) composite microspheres

Monodispersed crosslinked cationic poly(4‐vinylpyridine‐co‐butyl acrylate) [P(4VP‐BA)] seed latexes were prepared by soapless emulsion polymerization, using 2,2′‐azobismethyl(propionamidine)dihydrochloride (V₅₀) as an initiator and divinylbenzene (DVB) or ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The optimum condition to obtain monodispersed stable latex was investigated. It was found that the colloidal stability of the P4VP latex can be improved by adding an adequate amount of BA (BA/4VP = 1/4, w/w), and adopting a semicontinuous monomer feed mode. Subsequently, poly(4‐vinylpyridine‐co‐butyl acrylate)/Poly(styrene‐co‐butyl acrylate) [P(4VP‐BA)/P(ST‐BA)] composite microspheres were synthesized by seeded polymerization, using the above latex as a seed and a mixture of ST and BA as the second‐stage monomers. The effects of the type of crosslinker, the degree of crosslinking, and the initiators (AIBN and V₅₀) on the morphology of final composite particles are discussed in detail. It was found that P(4VP‐BA)/P(ST‐BA) composite microspheres were always surrounded by a PST‐rich shell when V₅₀ was used as initiator, while sandwich‐like or popcorn‐like composite particles were produced when AIBN was employed. This is because the polarity of the polymer chains with AIBN fragments is lower than for the polymer with V₅₀ fragments, hence leading to higher interfacial tension between the second‐stage PST‐rich polymer and the aqueous phase, and between PST‐rich polymer and P4VP‐rich seed polymer. As a result, the seed cannot be engulfed by the PST‐rich polymer. Furthermore, the decrease of T_g of the second‐stage polymer promoted phase separation between the seeds and the PST‐rich polymer: sandwich‐like particles formed more preferably than popcorn‐like particles. It is important knowledge that various morphologies different from PST‐rich core/P4VP‐rich shell morphology, can be obtained only by changing the initiator, considering P4VP is much more hydrophilic than PST. The zeta potential of composite particles initiated by AIBN in seeded polymerization shifted from a positive to a negative charge. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1190–1203, 2002     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

Strategies for the production of high solids acrylic/methacrylic core‐shell latices

Well‐defined poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) core shell particles with a moderately high solid content (49%) and particle diameters of less than 200 nm were prepared via seeded emulsion polymerization with a redox initiator and an anionic surfactant. Low‐viscosity (less than 150 cps at 20 s^?1) latex products were obtained by controlling the particle size distribution to within certain limits. Polymerization conversion and kinetics were followed gravimetrically and were adjusted so as to obtain recipes that could be scaled‐up for industrial production. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

New route to monodispersed amphiphilic core‐shell polymer nanoparticles: Polymerization of styrene from α‐methylstyrene‐containing macroinitiator

A novel method has been developed to prepare amphiphilic core‐shell polymer nanoparticles via polymerizations of styrene (St) initiated by hydrophilic α‐methylstyrene (AMS)‐containing prepolymers. AMS‐containing prepolymers were first synthesized by soap‐free emulsion copolymerization of AMS, butyl acrylate (BA), and acrylic acid (AA) and then were kept at 90°C to generate free radicals on the AMS segments, which subsequently initiate the polymerization of St. Thus, well‐defined, amphiphilic core‐shell nanoparticles, ranging from 126 to 282 nm in diameter, were produced in the absence of surfactant. The St conversion, molecular weights, and size of products strongly depended on the AMS‐containing prepolymer concentration and the AMS content of it. Transmission electron microscopic (TEM) images of the particles clearly show well‐defined core‐shell morphologies where PSt cores are coated with hydrophilic AMS‐containing prepolymer shells. The amphiphilic core‐shell nanoparticles can be produced in high concentrations (up to 25% solids content). This new method is scientifically and technologically significant because it provides a commercially viable route to a wide variety of novel amphiphilic core‐shell nanoparticles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Morphological prediction and its application to the synthesis of polyacrylate/polysiloxane core/shell latex particles

A theoretical analysis and a morphological prediction of polyacrylate (PA)/polysiloxane (PSi) latex particles with core/shell morphologies were first conducted based on interfacial tensions and relative volumes of the two polymers in the latex system. The results indicated that the normal core/shell morphology particles (PSi/PA), with hydrophobic polysiloxane as the core and with hydrophilic polyacrylate as the shell, can be easily formed. Although the inverted core/shell morphology particles (PA/PSi) with polyacrylate as the core could not be formed in most cases, even if the fraction volume of polysiloxane was larger than 0.872, which is the smallest value of forming a PA/PSi particle, the PSi/PA particles were unavoidably formed simultaneously with PA/PSi particle formation. The synthesis of PA/PSi particles containing equal amounts of polyacrylate and polysiloxane was then carried out using seeded emulsion polymerization. Before the cyclosiloxane cationic polymerization, 3‐methacryloyloxypropyl trimethoxysilane (MATS) was introduced into the polyacrylate seed latex to form an intermediate layer and chemical bonds between the core and the shell polymers. The characterization by transmission electron microscopy (TEM) demonstrated that the perfect PA/PSi core/shell particle is successfully synthesized when both the core and the shell polymers are crosslinked. The experiments showed that both the hardness and water adsorption ratio characteristics of latex films of the PA/PSi particles are in good agreement with those of the polysiloxane film. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2251–2258, 2001     

Morphology of micron‐sized,monodisperse, nonspherical polystyrene/poly(n‐butyl methacrylate) composite particles produced by seeded dispersion polymerization

Nonspherical polystyrene (PS)/poly(n‐butyl methacrylate) (PBMA) composite particles with uneven surfaces were produced by seeded dispersion polymerization of BMA with 1.65‐μm, monodisperse, spherical PS seed particles. The composite particles consisted of a PS core and an incomplete PBMA shell. The formation mechanism of such nonspherical particles was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2013–2021, 2002     

Synthesis and characterization of poly(butyl acrylate)/silica and poly(butyl acrylate)/silica/poly(methyl methacrylate) composite particles

Poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) core–shell particles embedded with nanometer‐sized silica particles were prepared by emulsion polymerization of butyl acrylate (BA) in the presence of silica particles preabsorbed with 2,2′‐azobis(2‐amidinopropane)dihydrochloride (AIBA) initiator and subsequent MMA emulsion polymerization in the presence of PBA/silica composite particles. The morphologies of the resulting PBA/silica and PBA/silica/PMMA composite particles were characterized, which showed that AIBA could be absorbed effectively onto silica particles when the pH of the dispersion medium was greater than the isoelectric potential point of silica. The critical amount of AIBA added to have stable dispersion of silica particles increased as the pH of the dispersion medium increased. PBA/silica composite particles prepared by in situ emulsion polymerization using silica preabsorbed with AIBA showed higher silica absorption efficiency than did the PBA/silica composite particles prepared by direct mixing of PBA latex and silica dispersion or by emulsion polymerization in which AIBA was added after the mixing of BA and silica. The PBA/silica composite particles exhibited a raspberrylike morphology, with silica particles “adhered” to the surfaces of the PBA particles, whereas the PBA/silica/PMMA composite latex particles exhibited a sandwich morphology, with silica particles mainly at the interface between the PBA core and the PMMA shell. Subsequently, the PBA/silica/PMMA composite latex obtained had a narrow particle size distribution and good dispersion stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3425–3432, 2006     

A study on the synthesis of acrylic composite particles and investigation of their characterization

Core-shell latexes were synthesized by sequential emulsion polymerization of methyl methacrylate (MMA), styrene (St), and ethyl acrylate (EA) in the presence of anionic surfactant, and the characteristics of these latexes were evaluated. The core latex had to be synthesized carefully to avoid the formation of secondary particles. The sequential polymerization method adopted for this synthesis took advantage of stabilizing particles grown during shell polymerization. In core-shell latex polymerization, to suppress the generation of new particles and to minimize the gelation during the shell polymerization, the amount of surfactant (Sodium dodecyl benzene sulfonate: SDBS) should be reduced to the minimum, 0.01 wt% and 0.02 wt% of SDBS to amount of monomer, respectively, when the Polymethyl methacrylate (PMMA) and Polystyrene (PSt) core latexes are prepared. In addition, the monomer pre-emulsion method is better than monomer-add method. The core-shell structure for composite latex synthesized was demonstrated by Particle Size Analysis (PSA), Differential Scanning Calorimeter (DSC), Transmission Electron Microscope (TEM), formability of film, and hydrolysis under NaOH solution.     

Surface modification of temperature‐responsive polymer particles by an electrically conducting polyaniline shell layer

In this research an attempt was made to prepare biocompatible electrically conductive composite polymer particles in view of their wide applications in biotechnology. Temperature‐sensitive polymer particles have applications as drug carriers, bioseparators, bioreactor cell activators and diagnostic reagents. So a combination of diverse properties in a single polymer composite is expected to increase its application potential. Here temperature‐responsive poly(N‐isopropyl acrylamide‐methyl methacrylate‐N,N′‐methylene‐bis‐acrylamide) (P(NIPAM‐MMA‐MBAAm)) core particles were prepared by emulsion copolymerization without using any stabilizer. In a second step seeded chemical oxidative polymerization of different amounts of aniline was carried out in the presence of submicron‐sized core particles to obtain P(NIPAM‐MMA‐MBAAm)/polyaniline composite particles. For a comparative study, reference polyaniline particles were prepared by chemical oxidative polymerization. Fourier transform IR spectroscopy, UV?visible spectroscopy, thermal and X‐ray diffraction analyses showed that composite particles prepared with higher aniline content (0.8 g) per unit mass (g) of core particles had high surface coverage compared with lower aniline content (0.1 g). © 2013 Society of Chemical Industry     

Preparation of spherical nanocomposites consisting of silica core and polyacrylate shell by emulsion polymerization

Nanocomposite particles consisting of silica (inorganic core) and polyacrylate (organic shell) were prepared in a form of emulsion by a new and simple method—the emulsion polymerization of acrylic monomers in the presence of silica sol. The key technique of the present emulsion polymerization, which made the formation of the nanocomposites successful, is the usage of nonionic surfactant above its cloud point. The morphology of the composite was investigated by DLS, AFM, and TEM, which clearly showed formation of the core‐shell‐type particles. A transparent film was prepared by casting the emulsion, which showed high resistibility against organic solvents. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 659–669, 2006     

Monodispersed composite particles prepared via emulsifier‐free emulsion polymerization using waterborne polyurethane as microreactors

Monodispersed polystyrene particles in submicrometer size were intriguingly prepared through emulsifier‐free batch‐seeded emulsion polymerization using nonmonodispersed waterborne polyurethane (WBPU) beads as microreactors. Different feed ratios of styrene (St)/WBPU for the preparation of composite particles were investigated, and the size–growth course was experimentally followed. The morphology and dispersity of the particles were characterized by scanning electron microscopy together with dynamic laser scattering particle size analyzer. Their inside structure was further characterized by transmission electron microscopy with ultramicrotomy combined with X‐ray photoelectron spectroscopy for the composite particles' surface analysis. The probable grafting polymerization of St from WBPU was verified by Fourier transform infrared spectroscopy and nuclear magnetic resonance instrument. The obtained composite particles were again employed as the seeds in the emulsion copolymerization of methyl methacrylate. As a result, the formed multilayered composite particles with reverse core–shell structure were also monodispersed and spherical. The mechanism of the formation of the monodispersed particles was proposed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40985.