Adsorption of IgG on spacer‐arm and L‐arginine ligand attached poly(GMA/MMA/EGDMA) beads

This work presents data on human immunoglobulin G (HIgG) adsorption onto L ‐arginine ligand attached poly(GMA/MMA/EGDMA)‐based affinity beads which were synthesized from methyl methacrylate (MMA) and glycidiyl methacrylate (GMA) in the presence of a crosslinker (i.e., ethylene glycol dimethacrylate; EGDMA) by suspension polymerization. The epoxy groups of the poly(GMA/MMA/EGDMA) beads were converted into amino groups after reaction with ammonia or 1,6‐diaminohexane (i.e., spacer‐arm). With L ‐arginine as a ligand, it was covalently immobilized on the aminated (poly(GMA/MMA/EGDMA)‐ AA) and/or the spacer‐arm attached (poly(GMA/MMA/EGDMA)‐SA) beads, using glutaric dialdehyde as a coupling agent. Both affinity poly(GMA/MMA/EGDMA)‐based beads were used in HIgG adsorption/desorption studies under defined pH, ionic strength, or temperature conditions in a batch reactor, using acid‐treated poly(GMA/MMA/EGDMA) beads as a control system. The poly(GMA/MMA/EGDMA)‐SA affinity beads resulted in an increase in the adsorption capacity to HIgG compared with the aminated counterpart (i.e., poly(GMA/MMA/EGDMA)‐AA). The maximum adsorption capacities of the poly(GMA/MMA/EGDMA)‐AA and poly(GMA/MMA/EGDMA)‐SA affinity beads were found to be 112.36 and 142 mg g^?1, and the affinity constants (K_d), evaluated by the Langmuir model, were 2.48 × 10^?7 and 6.98 × 10^?7M, respectively. Adsorption capacities of the poly(GMA/MMA/EGDMA)‐AA and poly(GMA/MMA/EGDMA)‐SA were decreased with HIgG by increasing the ionic strength adjusted with NaCl. Adsorption kinetic of HIgG onto both affinity adsorbents was analyzed with first‐ and second‐order kinetic equations. The first‐order equation fitted well with the experimental data. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 672–679, 2007     

Polyethylenimine‐grafted and HSA‐immobilized poly(GMA–MMA) affinity adsorbents for bilirubin removal

The epoxy‐group‐containing microspheres from cross‐linked glycidyl methacrylate and methyl methacrylate, poly(GMA–MMA), were prepared by suspension polymerisation. The epoxy groups of the poly(GMA–MMA) microspheres were used for grafting with an anionic polymer polyethylenimine (PEI) to prepare non‐specific affinity adsorbents (poly(GMA–MMA)–PEI) for bilirubin removal. The specificity of the poly(GMA–MMA)–PEI adsorbent to bilirubin was further increased by immobilization of human serum albumin (HSA) via adsorption onto PEI‐grafted poly(GMA–MMA) adsorbent. Various amounts of HSA were immobilized on the poly(GMA–MMA)–PEI adsorbent by changing the medium pH and initial HSA concentration. The maximum HSA content was obtained at 68.3 mg g^?1 microspheres. The effects of pH, ionic strength, temperature and initial bilirubin concentration on the adsorption capacity of both adsorbents were investigated in a batch system. Separation of bilirubin from human serum was also investigated in a continuous‐flow system. The bilirubin adsorption on the poly(GMA–MMA)–PEI and poly(GMA–MMA)–PEI–HSA was not well described by the Langmuir model, but obeyed the Freundlich isotherm model. The poly(GMA–MMA)–PEI affinity microspheres are stable when subjected to sanitization with sodium hydroxide after repeated adsorption–desorption cycles. Copyright © 2004 Society of Chemical Industry     

Cibacron Blue F3GA‐attached magnetic poly(2‐hydroxyethyl methacrylate) beads for human serum albumin adsorption

An affinity dye ligand, Cibacron Blue F3GA, was covalently attached onto magnetic poly(2‐hydroxyethyl methacrylate) (mPHEMA) beads for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. The mPHEMA beads, in the size range of 80 to 120 µm, were prepared by a modified suspension technique. Cibacron Blue F3GA molecules were incorporated on to the mPHEMA beads. The maximum amount of Cibacron Blue F3GA attachment was obtained as 68.3 µmol g^?1. HSA adsorption onto unmodified and Cibacron Blue F3GA‐attached mPHEMA beads was investigated batchwise. The non‐specific adsorption of HSA was very low (1.8 mg g^?1). Cibacron Blue F3GA attachment onto the beads significantly increased the HSA adsorption (94.5 mg g^?1). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (138.3 mg HSA g^?1). Desorption of HSA from Cibacron Blue F3GA‐attached mPHEMA beads was obtained by using 0.1 M Tris/HCl buffer containing 0.5 M NaSCN. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to re‐use Cibacron Blue F3GA‐attached mPHEMA beads without any significant decreases in their adsorption capacities. Copyright © 2004 Society of Chemical Industry     

N‐acetyl‐D‐galactosamine‐specific lectin isolation from soyflour with poly(HPMA‐GMA) beads

Soybean lectin was purified from seeds of Glycine max L.Merrill SA88. Poly(hydroxypropyl methacrylate‐glycidyl methacrylate) [poly(HPMA‐GMA)] beads were used as an affinity matrix and N‐acetyl‐D ‐galactosamine (GalNAc) was used as an affinity ligand. Soybean lectin adsorption with GalNAc attached poly(HPMA‐GMA) beads from soybean lectin solution (in phosphate buffered saline) was 5.0 mg/g. Maximum adsorption capacity for soybean lectin from the soy flour extract was 26.0 mg/g. Elution of soybean lectin from adsorbent was accomplished by 0.5M galactose solution. Purity of soybean lectin was determined by SDS‐PAGE. It was observed that soybean lectin could be repeatedly adsorbed and desorbed with GalNAc‐attached poly(HPMA‐GMA) beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Affinity adsorption of recombinant human interferon‐α on monosize dye‐affinity beads

Monosize, nonporous poly(glycidyl methacrylate) [poly(GMA)] beads were prepared by dispersion polymerization. Cibacron Blue F3GA was covalently attached onto the poly(GMA) beads for adsorption of recombinant interferon‐α (rHuIFN‐α). Monosize poly(GMA) beads were characterized by scanning electron microscopy. Dye‐carrying beads (1.73 mmol/g) were used in the adsorption–elution studies. The effect of initial concentration of rHuIFN‐α, pH, ionic strength, and temperature on the adsorption efficiency was studied in a batch system. Nonspecific adsorption of rHuIFN‐α on the beads was 0.78 mg/g. Dye attachment significantly increased the rHuIFN‐α adsorption up to 181.7 mg/g. Equilibrium adsorption of rHuIFN‐α onto the dye‐carrying beads increased with increasing temperature. Negative change in free energy (ΔG⁰ < 0) indicated that the adsorption was a thermodynamically favorable process. ΔS and ΔH values were 146.1 J/mol K and ?37.39 kJ/mol, respectively. Significant amount of the adsorbed rHuIFN‐α (up to 97.2%) was eluted in the elution medium containing 1.0M NaCl in 1 h. To determine the effects of adsorption conditions on possible conformational changes of rHuIFN‐α structure, fluorescence spectrophotometry was employed. We concluded that dye‐affinity beads can be applied for rHuIFN‐α adsorption without causing any significant conformational changes. Repeated adsorption–elution processes showed that these beads are suitable for rHuIFN‐α adsorption. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 975–981, 2007     

Synthesis and characterization of magnetic beads containing aminated fibrous surfaces for removal of Reactive Green 19 dye: kinetics and thermodynamic parameters

BACKGROUND: Poly(HEMA‐co‐MMA) beads were prepared from 2‐hydroxyethyl‐methacrylate (HEMA) and methylmethacrylate (MMA) in the presence of FeCl₃. Thermal co‐precipitation of Fe(III) ions containing beads with Fe(II) ions was carried out under alkaline conditions. The magnetic beads were grafted with poly(glycidylmethacrylate; p(GMA)), and the epoxy groups of the grafted p(GMA) brushes were converted into amino groups by reaction with ammonia. RESULTS: The magnetic beads were characterized by surface area measurement, electron spin resonance (ESR), Mössbauer spectroscopy and scanning electron microscopy (SEM). The maximum adsorption of Reactive Green‐19 (RG‐19) dye on the p(GMA) grafted and amine modified magnetic beads was around pH 3.0. The adsorption capacity of magnetic beads was 84.6 mg dye g^?1. The effects of adsorbent dosage, ionic strength and temperature have also been reported. Batch kinetic sorption experiments showed that a pseudo‐second‐order rate kinetic model was applicable. CONCLUSION: The p(GMA) grafted and amine modified magnetic beads (adsorbent) were expected to have the advantage of mobility of the grafted chains in the removal of acidic dyes from aqueous solutions. The magnetic beads have potential as an adsorbent for removal of pollutants under various experimental conditions without significant reduction in their initial adsorption capacity. Copyright © 2011 Society of Chemical Industry     

Immobilization of glucoamylase on the plain and on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres

Immobilization glucoamylase onto plain and a six‐carbon spacer arm (i.e., hexamethylene diamine, HMDA) attached poly(2‐hydroxyethylmethacrylate‐ethyleneglycol dimethacrylate) [poly(HEMA‐EGDMA] microspheres was studied. The microspheres were prepared by suspension polymerization and the spacer arm was attached covalently by the reaction of carbonyl groups of poly(HEMA‐EGDMA). Glucoamylase was then covalently immobilized either on the plain of microspheres via CNBr activation or on the spacer arm‐attached microspheres via CNBr activation and/or using carbodiimide (CDI) as a coupling agent. Incorporation of the spacer arm resulted an increase in the apparent activity of the immobilized enzyme with respect to enzyme immobilized on the plain of the microspheres. The activity yield of the immobilized glucoamylase on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres was 63% for CDI coupling and 82% for CNBr coupling. This was 44% for the enzyme, which was immobilized on the plain of the unmodified poly(HEMA‐EGDMA) microspheres via CNBr coupling. The K_m values for the immobilized glucoamylase preparations (on the spacer arm‐attached microspheres) via CDI coupling 0.9% dextrin (w/v) and CNBr coupling 0.6% dextrin (w/v) were higher than that of the free enzyme 0.2% dextrin (w/v).The temperature profiles were broader for both immobilized preparations than that of the free enzyme. The operational inactivation rate constants (k_iop) of immobilized enzymes were found to be 1.42 × 10^?5 min^?1 for CNBr coupled and 3.23 × 10^?5 min^?1 for CDI coupled glucoamylase. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2702–2710, 2001     

Immobilization of β-galactosidase onto magnetic poly(GMA–MMA) beads for hydrolysis of lactose in bed reactor

In the present study, novel magnetic beads were prepared from glycidylmethacrylate and methylmethacrylate via suspension polymerization in the presence of a cross-linker (i.e. ethylenedimethylmethacrylate). The magnetic poly(GMA–MMA) beads were characterized with scanning electron microscope, FT-IR and ESR spectrophotometers. The reactive character of the epoxy groups allowed the attachment of the amino groups. The aminated magnetic beads were used for the covalent immobilization of β-galactosidase via glutaric dialdehyde activation. The maximum amount of immobilized β-galactosidase on the magnetic poly(GMA–MMA) beads was 9.87 mg/g support. The values of Michaelis constants K_m for immobilized β-galactosidase was significant larger, indicating decreased affinity by the enzyme for its substrate, whereas V_max values were smaller for the immobilized β-galactosidase. However, the β-galactosidase immobilized on the magnetic poly(GMA–MMA) beads resulted in an increase in enzyme stability with time. Optimum operational temperature for immobilized enzyme was 5 °C higher than that of the free enzyme and was significantly broader. Finally, a bed reactor with β-galactosidase immobilized was used for hydrolysis of lactose. The enzyme reactor operated continuously at 35 °C for 60 h and the immobilized enzyme lost about 12% of its initial activity after this period.     

Synthesis and characterization of butyl acrylate/methyl methacrylate/glycidyl methacrylate latexes

The butyl acrylate (BA)/methyl methacrylate (MMA), and glycidyl methacrylate (GMA) composite copolymer latex was synthesized by seeded emulsion polymerization technique taking poly(methyl methacrylate) (PMMA) latex as the seed. Four series of experiments were carried out by varying the ratio of BA : MMA (w/w) (i.e. 3.1 : 1, 2.3 : 1, 1.8 : 1, and 1.5 : 1) and in each series GMA content was varied from 1 to 5% (w/w). The structural properties of the copolymer were analyzed by FTIR, ¹H‐, and ¹³C‐NMR. Morphological characterization was carried out using transmission electron microscopy (TEM). In all the experiments, monomer conversion was ～99% and final copolymer composition was similar to that of feed composition. The incorporation of GMA into the copolymer chain was confirmed by ¹³C‐NMR. The glass transition temperature (T_g) of the copolymer latex obtained from the differential scanning calorimetry (DSC) curve was comparable to the values calculated theoretically. With increase in GMA content, particles having core‐shell morphology were obtained, and there was a decrease in the particle size as we go from 2–5% (w/w) of GMA. The adhesive strength of the latexes was found to be dependent on the monomer composition. With increase in BA : MMA ratio, the tackiness of the film increased while with its decrease the hardness of the film increased. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of gel resins and removal of copper and lead from water

A series of gel resins were prepared by polymerizing glycidyl methacrylate (GMA) and 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) and functionalizing with ammonia (NH₃) and tetraethylenepentamine (TEPA). The aminated gel resins were then used as an adsorbent for the removal of heavy metal ions (Cu²⁺ and Pb²⁺). These gel resins containing amino groups and chelating amino groups had excellent adsorptive properties for Cu²⁺ and Pb²⁺. The adsorption process reached equilibrium in 40 min, and the adsorption capacities of Cu²⁺ and Pb²⁺ were 75.0 mg g^?1 and 266.6 mg g^?1 for the NH₃‐aminated gel resins and 57.5 mg g^?1 and 330.6 mg g^?1 for the TEPA‐aminated gel resins, respectively. After five adsorption–desorption processes, the adsorption capacities only decreased slightly. Thus, these aminated gel resins can be used as effective adsorbents for aqueous heavy metal ions (Cu²⁺ and Pb²⁺). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44466.     

Improved synthesis of a branched poly(ethylene imine)‐modified cellulose‐based adsorbent for removal and recovery of Cu(II) from aqueous solution

This study focuses on an improved synthesis of a branched poly (ethylene imine) (PEI)‐modified cellulose‐based adsorbent (Cell‐g‐PGMA‐PEI). We aim to improve the adsorbent capacity by reducing side reaction of epoxide ring opening during graft copolymerization of glycidyl methacrylate (GMA) onto cellulose which increases the content of epoxy groups, anchors to immobilize branched PEI moieties. FTIR spectra provided the evidence of successful graft copolymerization of GMA onto cellulose initiated by benzoyl peroxide (BPO) and modification with PEI. The amount of epoxy groups of Cell‐g‐PGMA was 4.35 mmol g^?1 by epoxy titration. Subsequently, the adsorption behavior of Cu(II) on cell‐g‐PGMA‐PEI in aqueous solution has been investigated. The data from the adsorption kinetic experiments agreed well with pseudo‐second‐order model. The adsorption isotherms can be interpreted by the Langmuir model with the maximum adsorption capacity of 102 mg g^?1 which was largely improved compared with the similar adsorbent reported. The dynamic adsorption capacity obtained from the column tests was 119 mg g^?1 and the adsorbent could be regenerated by HCl of 0.1 mol L^?1. Results indicate that the novel pathway for the synthesis of Cell‐g‐PGMA‐PEI exhibits significant potential to improve the performance of adsorbents in removal and recovery of Cu(II) from aqueous solution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(vinylbenzylchloride) beads grafted with polymer brushes carrying hydrazine ligand for reversible enzyme immobilization

Poly(glycidylmethacrylate), p(GMA), brush grafted poly(vinylbenzyl chloride/ethyleneglycol dimethacrylate), p(VBC/EGDMA), beads were prepared by suspension polymerization and the beads were grafted with poly(glycidyl methacrylate), p(GMA), via surface‐initiated atom transfer radical polymerization aiming to construct a material surface with fibrous polymer. The epoxy groups of the fibrous polymer were reacted with hydrazine (HDZ) to create affinity binding site on the support for adsorption of protein. The influence of pH, and initial invertase concentration on the immobilization capacity of the p(VBC/EGDMA‐g‐GMA)‐HDZ beads has been investigated. Maximum invertase immobilization onto hydrazine functionalized beads was found to be 86.7 mg/g at pH 4.0. The experimental equilibrium data obtained invertase adsorption onto p(VBC/EGDMA‐g‐GMA)‐HDZ affinity beads fitted well to the Langmuir isotherm model. It was shown that the relative activity of immobilized invertase was higher than that of the free enzyme over broader pH and temperature ranges. The K_m and V_max values of the immobilized invertase were larger than those of the free enzyme. After inactivation of enzyme, p(VBC/EGDMA‐g‐GMA)‐HDZ beads can be easily regenerated and reloaded with the enzyme for repeated use. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Pseudospecific magnetic affinity beads for immunoglobulin‐G depletion from human serum

Magnetic poly(ethylene glycol dimethacrylate‐N‐methacryloyl‐(L )‐histidine methyl ester) [m‐poly(EGDMA‐MAH)] beads were prepared by suspension polymerization for the affinity depletion of immunoglobulin‐G (IgG) from human serum in a batch system. Elemental analysis of the magnetic beads for nitrogen was estimated as 70 μmol MAH/g polymer. IgG adsorption onto the m‐poly(EGDMA) was negligible. Higher adsorption value (up to 46.8 mg/g) was obtained in which the m‐poly(EGDMA‐MAH) beads were used. IgG adsorption capacity of the magnetic beads increased with an increase in the concentration of IgG. The maximum IgG adsorption was observed at pH 6.5 for MOPS buffer. IgG molecules could be repeatedly adsorbed and eluted with these adsorbents, without noticeable loss in their IgG adsorption capacity. Adsorption capacity decreased for both increasing salt concentration and temperature. In this study, we show that m‐poly(EGDMA‐MAH) beads (wherein IgG molecules bind directly with the matrix) can be used directly for affinity depletion without further modification. Higher adsorption value was obtained from human serum (up to 85.7 mg/g). The elution results demonstrated that the adsorption of IgG to the adsorbent was reversible. The depletion efficiencies for IgG were above 85% for all studied concentrations. Eluted portion was analyzed for testing the IgG removal efficiency by two dimensional gel electrophoresis. Eluted proteins include mainly IgG, and a small number of nonalbumin proteins such as apolipoprotein A1, serotransferrin, haptoglobulin, and α1‐antitrypsin. IgA was not identified in eluted fraction. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Novel nanocomposite of poly(acrylonitrile‐co‐glycidyl methacrylate) crosslinked with Jeffamine‐functionalized multiwalled carbon nanotubes as gel polymer electrolytes

Multiwalled carbon nanotubes (MWCNTs) were functionalized with α,ω‐diamino poly(propylene oxide) (Jeffamine) of different molecular weights and crosslinked with poly(acrylonitrile‐co‐glycidyl methacrylate) [P(AN‐GMA)] to prepare a novel nanocomposite for applications in gel polymer electrolytes (GPEs). The synthesized copolymer was characterized by ¹H‐NMR, Fourier transform infrared, and thermal analysis. Scanning electron microscope observation revealed that the Jeffamine‐functionalized MWCNTs distributed uniformly in the nanocomposite membrane. The mechanical behaviors of the nanocomposite membranes were investigated. It was found that the crosslinked nanocomposite membranes of P(AN‐GMA) and Jeffamine‐functionalized MWCNTs exhibited much higher mechanical strength than the counterpart nanocomposite obtained by physical blending. Moreover, the weight content and molecular weights of Jeffamine had an effect on the mechanical properties of the nanocomposites. Differential scanning calorimeter measurements showed that the crosslinked nanocomposite membranes were amorphous. GPEs based on the nanocomposite were prepared and characterized by complex impedance measurements. The GPE based on the nanocomposite of P(AN‐GMA) crosslinked with 6 wt % of MWCNTs functionalized by Jeffamine D400 showed an ionic conductivity of about 3.39 × 10^?4 S cm^?1 at 25°C, which is much higher than the counterpart nanocomposite of physically blended P(AN‐GMA) and MWCNTs. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of defined polyhedral oligosilsesquioxane‐containing diblock and triblock methacrylate copolymers by atom transfer radical polymerization

Defined diblock and triblock copolymers composed of methyl methacrylate‐co‐glycidyl methacrylate block and 3‐{3,5,7,9,11,13,15‐hepta(2‐methylpropyl)‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxan‐1‐yl}propyl methacrylate block(s), i.e., P(MMA‐co‐GMA)‐b‐PiBuPOSSMA and PiBuPOSSMA‐b‐P(MMA‐co‐GMA)‐b‐PiBuPOSSMA, were synthesized by atom transfer radical polymerization (ATRP). First, monofunctional and bifunctional P(MMA‐co‐GMA) copolymers were synthesized by ATRP. Subsequently, these copolymers were successfully used as macroinitiators for ATRP of POSS‐containing methacrylate monomer. The process showed high initiation efficiency of macroinitiators and led to products with low dispersity. The synthesized block copolymers were characterized by size exclusion chromatography, ¹H‐NMR spectroscopy and their glass transition temperatures were determined by differential scanning calorimetry. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Covalent immobilization of β‐galactosidase onto electrospun nanofibers of poly (AN‐co‐MMA) copolymer

Immobilization of β‐galactosidase in poly (acrylonitrile‐co‐methyl methacrylate) poly (AN‐co‐MMA) Nanofibers was studied by electrospinning, and a spacer‐arm i.e., (Polyethyleneimine (PEI)) was covalently attached by the reaction of carbonyl groups of Poly (AN‐co‐MMA) nanofibers. β‐galactosidase was then covalently immobilized through the spacer‐arm of the Poly (AN‐co‐MMA) nanofibers by using glutaraldehyde (GA) as a coupling agent. Nanofibers mode of interaction was proven by FTIR and thermal gravimetric analysis and supported by morphological changes recognized through SEM examination. Factors affecting the modification process such as PEI concentration, reaction time, and reaction temperature have been studied. Its influence on the amount of coupled PEI was consequently correlated to the changes of the catalytic activity and the retained activity of immobilized enzyme, the main parameters judging the success of the immobilization process. Evidences of Poly (AN‐co‐MMA) nanofibers modification were extracted from morphological changes recognized through SEM examination. The maximum activity (V_max) and michaelis constant (K_m) of immobilized enzyme were found to be 8.8 μmole/min mg protein and 236.7 mM, respectively. Stabilities of the immobilized β‐galactosidase were obviously improved. The optimum temperature for β‐galactosidase immobilized on the spacer‐arm attached nanofiber was 5°C higher than that of the free enzyme and was also significantly broader. The immobilized β‐galactosidase had better resistance to temperature inactivation than did the free form. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Adsorption of Ni2+ from aqueous solutions by novel polyethyleneimine‐attached poly(p‐chloromethylstyrene) beads

In this study Ni²⁺ adsorption properties of polyethyleneimine (PEI)‐attached poly(p‐chloromethylstyrene) (PCMS) beads were investigated. Spherical beads with an average size of 186 μm were obtained by the suspension polymerization of p‐chloromethylstyrene conducted in an aqueous dispersion medium. Owing to the reasonably rough character of the bead surface, PCMS beads had a specific surface area of 14.1 m²/g. PEI chains could be covalently attached onto the PCMS beads with equilibrium binding capacities up to 208 mg PEI/g beads, via a direct chemical reaction between the amine and chloro‐methyl groups. After PEI adsorption with 10% (w/w) initial PEI concentration, free amino content of PEI‐attached PCMS beads was determined as 0.91 mEq/g. PEI‐attached PCMS beads were utilized as adsorbents in the adsorption/desorption of Ni²⁺ ions from synthetic solutions. The adsorption process was fast; 90% of adsorption occurred within 90 min, and equilibrium was reached at around 2 h. Adsorption capacity was obtained to be 78.2 mg/g at a pH of about 6.0. The chelating beads can be easily regenerated by 0.1 M HNO₃ with higher effectiveness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2467–2473, 2002     

DNA adsorption on a poly‐L‐lysine‐immobilized poly(2‐hydroxyethyl methacrylate) membrane

The DNA adsorption properties of poly‐L ‐lysine‐immobilized poly(2‐hydroxyethyl methacrylate) (pHEMA) membrane were investigated. The pHEMA membrane was prepared by UV‐initiated photopolymerization and activated with epichlorohydrin. Poly‐L ‐lysine was then immobilized on the activated pHEMA membrane by covalent bonding, via a direct chemical reaction between the amino group of poly‐L ‐lysine and the epoxy group of pHEMA. The poly‐L ‐lysine content of the membrane was determined as 1537 mg m^?2. The poly‐L ‐lysine‐immobilized membrane was utilized as an adsorbent in DNA adsorption experiments. The maximum adsorption of DNA on the poly‐L ‐lysine‐immobilized pHEMA membrane was observed at 4 °C from phosphate‐buffered salt solution (pH 7.4, 0.1 M; NaCl 0.5 M) containing different amounts of DNA. The non‐specific adsorption of DNA on the plain pHEMA membrane was low (about 263 mg m^?2). Higher DNA adsorption values (up to 5849 mg m^?2) were obtained in which the poly‐L ‐lysine‐immobilized pHEMA membrane was used. Copyright © 2003 Society of Chemical Industry     

Synthesis and characterization of poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) copolymer beads for heavy‐metal removal

We prepared poly(ethylene glycol dimethacrylate–1‐vinyl‐1,2,4‐triazole) [poly(EGDMA–VTAZ)] beads (average diameter = 150–200 μm) by copolymerizing ethylene glycol dimethacrylate (EGDMA) with 1‐vinyl‐1,2,4‐triazole (VTAZ). The copolymer composition was characterized by elemental analysis and found to contain five EGDMA monomer units for each VTAZ monomer unit. The poly(EGDMA–VTAZ) beads had a specific surface area of 65.8 m²/g. Poly(EGDMA–VTAZ) beads were characterized by Fourier transform infrared spectroscopy, elemental analysis, surface area measurements, swelling studies, and scanning electron microscopy. Poly(EGDMA–VTAZ) beads with a swelling ratio of 84% were used for the heavy‐metal removal studies. The adsorption capacities of the beads for Cd(II), Hg(II), and Pb(II) were investigated in aqueous media containing different amounts of these ions (5–750 mg/L) and at different pH values (3.0–7.0). The maximum adsorption capacities of the poly(EGDMA–VTAZ) beads were 85.7 mg/g (0.76 mmol/g) for Cd(II), 134.9 mg/g (0.65 mmol/g) for Pb(II), and 186.5 mg/g (0.93 mmol/g) for Hg(II). The affinity order toward triazole groups on a molar basis was observed as follows: Hg(II) > Cd(II) > Pb(II). pH significantly affected the adsorption capacity of the VTAZ‐incorporated beads. The equilibrium data were well fitted to the Redlich–Peterson isotherm. Consideration of the kinetic data suggested that chemisorption processes could have been the rate‐limiting step in the adsorption process. Regeneration of the chelating‐beads was easily performed with 0.1M HNO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4276–4283, 2006     

Preparation of a novel metal‐chelate affinity beads for albumin isolation from human plasma

In this study, we developed a novel approach to obtain a high protein‐adsorption capacity utilizing 2‐methacryloylamidohistidine (MAH) as a biollgand. MAH was synthesized by reacting methacryloyl chloride and histidine. Spherical beads, with an average size of 150–200 μm, were obtained by the radical suspension polymerization of MAH, ethyleneglycol dimethacrylate (EGDMA), and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. p(EGDMA–HEMA–MAH) beads had a specific surface area of 17.6 m²/g. The synthesized MAH monomer was characterized by NMR. p(EGDMA–HEMA–MAH) beads were characterized by a swelling test, FTIR, and elemental analysis. Then, Cu(II) ions were incorporated into the beads and Cu(II) loading was found to be 0.96 mmol/g. These beads, with a swelling ratio of 65% and containing 1.6 mmol MAH/g, were used in the adsorption/desorption of human serum albumin (HSA) from both aqueous solutions and human serum. The adsorption of HSA onto p(EGDMA–HEMA–MAH) was low (8.8 mg/g). Cu(II) chelation onto the beads significantly increased the HSA adsorption (56.3 mg/g). The maximum HSA adsorption was observed at pH 8.0 Higher HSA adsorption was observed from human serum (94.6 mg HSA/g). Adsorptions of other serum proteins were obtained as 3.7 mg/g for fibrinogen and 8.5 mg/g for γ‐globulin. The total protein adsorption was determined as 107.1 mg/g. Desorption of HSA was obtained using a 0.1M Tris/HCI buffer containing 0.5M NaSCN. High desorption ratios (to 98% of the adsorbed HSA) were observed. It was possible to reuse Cu(II)‐chelated p(EGDMA–HEMA–MAH) beads without significant decreases in the adsorption capacities. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2840–2847, 2003