MLS‐based variable‐node elements compatible with quadratic interpolation. Part I: formulation and application for non‐matching meshes

Two‐dimensional variable‐node elements compatible with quadratic interpolation are developed using the moving least‐square (MLS) approximation. The mapping from the parental domain to the physical element domain is implicitly obtained from MLS approximation, with the shape functions and their derivatives calculated and saved only at the numerical integration points. It is shown that the present MLS‐based variable‐node elements meet the patch test if a sufficiently large number of integration points are employed for numerical integration. The cantilever problem with non‐matching meshes is chosen to check the feasibility of the present MLS‐based variable‐node elements, and the result is compared with that from the lower‐order case compatible with linear interpolation. Copyright © 2005 John Wiley & Sons, Ltd.     

A new computational approach to contact mechanics using variable‐node finite elements

In this paper, a new computational strategy for two‐dimensional contact problems is developed with the aid of variable‐node finite elements within the range of infinitesimal deformations. The variable‐node elements, which are among MLS (moving least square)‐based finite elements, enable us to transform node‐to‐surface contact problems into node‐to‐node contact problems. This contact formulation with variable‐node elements leads to an accurate and effective solution procedure, needless to mention that the contact patch test is passed without any additional treatment. Through several numerical examples, we demonstrate its simplicity and the effectiveness of the proposed scheme. Copyright © 2007 John Wiley & Sons, Ltd.     

A new finite element approach for solving three‐dimensional problems using trimmed hexahedral elements

In this paper, a novel finite element approach is presented to solve three‐dimensional problems using trimmed hexahedral elements generated by cutting a simple block consisting of regular hexahedral elements with a computer‐aided design (CAD) surface. Trimmed hexahedral elements, which are polyhedral elements with curved faces, are placed at the boundaries of finite element models, and regular hexahedral elements remain in the interior regions. Shape functions for trimmed hexahedral elements are developed by using moving least square approximation with harmonic weight functions based on an extension of Wachspress coordinates to curved faces. A subdivision of polyhedral domains into tetrahedral sub‐domains is performed to construct shape functions for trimmed hexahedral elements, and numerical integration of the weak form can be carried out consistently over the tetrahedral sub‐domains. Trimmed hexahedral elements have similar properties to conventional finite elements regarding the continuity, the completeness, the node–element connectivity, and the inter‐element compatibility. Numerical examples for three‐dimensional linear elastic problems with complex geometries show the efficiency and effectiveness of the present method. Copyright © 2015 John Wiley & Sons, Ltd.     

Polyhedral elements by means of node/edge‐based smoothed finite element method

The node‐based or edge‐based smoothed finite element method is extended to develop polyhedral elements that are allowed to have an arbitrary number of nodes or faces, and so retain a good geometric adaptability. The strain smoothing technique and implicit shape functions based on the linear point interpolation make the element formulation simple and straightforward. The resulting polyhedral elements are free from the excessive zero‐energy modes and yield a robust solution very much insensitive to mesh distortion. Several numerical examples within the framework of linear elasticity demonstrate the accuracy and convergence behavior. The smoothed finite element method‐based polyhedral elements in general yield solutions of better accuracy and faster convergence rate than those of the conventional finite element methods. Copyright © 2016 John Wiley & Sons, Ltd.     

An element‐free Galerkin method for 3D crack propagation simulation under complicated stress conditions

This study develops an element‐free Galerkin method based on the moving least‐squares approximation to trace three‐dimensional crack propagation under complicated stress conditions. The crack surfaces are modelled by a collection of planar triangles that are added when cracks propagate. The visibility criterion is adopted to treat the screening effect of the cracks on the influenced domain of a Gaussian point. Cracks are assumed to propagate in the perpendicular planes at crack front points when the strain energy release rates reach the material fracture toughness. This method is unique in that it uses a nonlinear contact iterative algorithm to consider contributions of crack surface interaction to the global equilibrium equations, so that crack opening, sliding and closing under complicated stress states can be efficiently modelled. Two numerical examples of three‐dimensional quasi‐static crack propagation were modelled with satisfactory results. Copyright © 2012 John Wiley & Sons, Ltd.     

Coupled meshfree and fractal finite element method for mixed mode two‐dimensional crack problems

This paper presents a coupling technique for integrating the element‐free Galerkin method (EFGM) with the fractal finite element method (FFEM) for analyzing homogeneous, isotropic, and two‐dimensional linear‐elastic cracked structures subjected to mixed‐mode (modes I and II) loading conditions. FFEM is adopted for discretization of the domain close to the crack tip and EFGM is adopted in the rest of the domain. In the transition region interface elements are employed. The shape functions within interface elements which comprise both the EFG and the finite element (FE) shape functions, satisfies the consistency condition thus ensuring convergence of the proposed coupled EFGM–FFEM. The proposed method combines the best features of EFGM and FFEM, in the sense that no special enriched basis functions or no structured mesh with special FEs are necessary and no post‐processing (employing any path independent integrals) is needed to determine fracture parameters, such as stress‐intensity factors (SIFs) and T‐stress. The numerical results show that SIFs and T‐stress obtained using the proposed method are in excellent agreement with the reference solutions for the structural and crack geometries considered in the present study. Also, a parametric study is carried out to examine the effects of the integration order, the similarity ratio, the number of transformation terms, and the crack length to width ratio on the quality of the numerical solutions. A numerical example on mixed‐mode condition is presented to simulate crack propagation. As in the proposed coupled EFGM–FFEM at each increment during the crack propagation, the FFEM mesh (around the crack tip) is shifted as it is to the new updated position of the crack tip (such that FFEM mesh center coincides with the crack tip) and few meshless nodes are sprinkled in the location where the FFEM mesh was lying previously, crack‐propagation analysis can be dramatically simplified. Copyright © 2010 John Wiley & Sons, Ltd.     

The least‐squares finite element method in elasticity. Part II: Bending of thin plates

A least‐squares finite element method (LSFEM) for bending problems of thin plates is developed. This LSFEM is based on the first‐order deflection‐slope‐moment‐shear force formulation. Four compatibility conditions are added into the first‐order system; thus, the method can accommodate all kinds of equal‐order interpolations. Numerical experiments on various examples show that the method achieves an optimal rate of convergence for all eight variables. Copyright © 2002 John Wiley & Sons, Ltd.     

A modified element‐free Galerkin method with essential boundary conditions enforced by an extended partition of unity finite element weight function

In this work we propose a method which combines the element‐free Galerkin (EFG) with an extended partition of unity finite element method (PUFEM), that is able to enforce, in some limiting sense, the essential boundary conditions as done in the finite element method (FEM). The proposed extended PUFEM is based on the moving least square approximation (MLSA) and is capable of overcoming singularity problems, in the global shape functions, resulting from the consideration of linear and higher order base functions. With the objective of avoiding the presence of singular points, the extended PUFEM considers an extension of the support of the classical PUFE weight function. Since the extended PUFEM is closely related to the EFG method there is no need for special approximation functions with complex implementation procedures, and no use of the penalty and/or multiplier method is required in order to approximately impose the essential boundary condition. Thus, a relatively simple procedure is needed to combine both methods. In order to attest the performance of the method we consider the solution of an analytical elastic problem and also some coupled elastoplastic‐damage problems. Copyright © 2003 John Wiley & Sons, Ltd.     

Automatic 3-D mode I crack propagation calculations with finite elements

An algorithm is presented which allows for fully automatic linear elastic low cycle fatigue (LCF) crack propagation calculations of mode I plane cracks in large structures by means of the finite element technique. The bulk of the algorithm consists of an automatic procedure to introduce the geometry of a plane crack with an arbitrary crack front in an existing three-dimensional (3-D) mesh. Once the K-distribution for the initial crack has been calculated, the use of the superelement technique reduces the computing time for the subsequent cycles by a factor of up to 40 or more. Two industrial examples illustrate the accuracy and effectiveness of the method. © 1998 John Wiley & Sons, Ltd.     

An adaptive finite element framework for fatigue crack propagation

A new finite element (FE) framework for fatigue crack propagation (FCP) analysis is proposed. This framework combines the simplicity of standard industrial FCP analysis with the generality and accuracy of a full FE analysis and can be implemented on a small computer by combining standard existing computational tools. In this way it constitutes an attractive alternative to existing approaches. The framework is based on linear elastic fracture mechanics and on FE mesh adaptation. Some novel features are introduced in several of its steps in order to make it efficient and at the same time reasonably accurate. Various computational aspects of the scheme are discussed. A few two‐dimensional numerical examples involving FCP in thin sheets under plane‐stress conditions are presented to demonstrate the performance of the framework. Some of the numerical results are compared to those of laboratory experiments. Copyright © 2002 John Wiley & Sons, Ltd.     

Polygon scaled boundary finite elements for crack propagation modelling

An automatic crack propagation modelling technique using polygon elements is presented. A simple algorithm to generate a polygon mesh from a Delaunay triangulated mesh is implemented. The polygon element formulation is constructed from the scaled boundary finite element method (SBFEM), treating each polygon as a SBFEM subdomain and is very efficient in modelling singular stress fields in the vicinity of cracks. Stress intensity factors are computed directly from their definitions without any nodal enrichment functions. An automatic remeshing algorithm capable of handling any n‐sided polygon is developed to accommodate crack propagation. The algorithm is simple yet flexible because remeshing involves minimal changes to the global mesh and is limited to only polygons on the crack paths. The efficiency of the polygon SBFEM in computing accurate stress intensity factors is first demonstrated for a problem with a stationary crack. Four crack propagation benchmarks are then modelled to validate the developed technique and demonstrate its salient features. The predicted crack paths show good agreement with experimental observations and numerical simulations reported in the literature. Copyright © 2012 John Wiley & Sons, Ltd.     

Mid‐node admissible spaces for quadratic triangular 2D finite elements with one edge curved

A robust element distortion metric, based on the new concept of mid‐node admissible spaces, for two‐dimensional quadratic triangular finite elements is developed. The metric is based on the Jacobian determinant over the entire element, without requiring that it actually be computed everywhere on the element. The metric is relatively inexpensive to compute, especially for mildly distoted elements. The metric is able to detect elementsof poor quality that other distortion metrics fall to detect. It also has the ability to approve elements of good quality regardless of the extent to which they may appear geometrically distorted. Copyright © 2001 John Wiley & Sons, Ltd.     

Mid‐node admissible spaces for quadratic triangular arbitrarily curved 2D finite elements

This paper presents the extension of the mid‐node admissible space (MAS) concept for two‐dimensional quadratic triangular element (2DQTE) to the case when more than one edge is curved. The mathematical background for the MAS for 2DQTE with more than one edge curved is developed. A metric, based on the determination of the Jacobian distribution, whose evaluation and implementation is aided through the use of the MAS is developed. The evaluation of the quality of an element based on this metric and procedures to repair an element to produce better results are also presented. Copyright © 2001 John Wiley & Sons, Ltd.     

A least‐squares coupling method between a finite element code and a discrete element code

This paper presents a coupling method between a discrete element code CeaMka3D and a finite element code Sem. The coupling is based on a least‐squares method, which adds terms of forces to finite element code and imposes the velocity at coupling particles. For each coupling face, a small linear system with a constant matrix is solved. This method remains conservative in energy and shows good results in applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Cracking node method for dynamic fracture with finite elements

A new method for modeling discrete cracks based on the extended finite element method is described. In the method, the growth of the actual crack is tracked and approximated with contiguous discrete crack segments that lie on finite element nodes and span only two adjacent elements. The method can deal with complicated fracture patterns because it needs no explicit representation of the topology of the actual crack path. A set of effective rules for injection of crack segments is presented so that fracture behavior beginning from arbitrary crack nucleations to macroscopic crack propagation is seamlessly modeled. The effectiveness of the method is demonstrated with several dynamic fracture problems that involve complicated crack patterns such as fragmentation and crack branching. Copyright © 2008 John Wiley & Sons, Ltd.     

A finite element semi‐Lagrangian method with L2 interpolation

High‐order accurate methods for convection‐dominated problems have the potential to reduce the computational effort required for a given order of solution accuracy. The state of the art in this field is more advanced for Eulerian methods than for semi‐Lagrangian (SLAG) methods. In this paper, we introduce a new SLAG method that is based on combining the modified method of characteristics with a high‐order interpolating procedure. The method employs the finite element method on triangular meshes for the spatial discretization. An L² interpolation procedure is developed by tracking the feet of the characteristic lines from the integration nodes. Numerical results are illustrated for a linear advection–diffusion equation with known analytical solution and for the viscous Burgers’ equation. The computed results support our expectations for a robust and highly accurate finite element SLAG method. Copyright © 2012 John Wiley & Sons, Ltd.     

Nonlinear rotation‐free three‐node shell finite element formulation

A new triangular thin‐shell finite element formulation is presented, which employs only translational degrees of freedom. The formulation allows for large deformations, and it is based on the nonlinear Kirchhoff thin‐shell theory. A number of static and dynamic test problems are considered for which analytical or benchmark solutions exist. Comparisons between the predictions of the new model and these solutions show that the new model accurately reproduces complex nonlinear analytical solutions as well as solutions obtained using existing, more complex finite element formulations. Copyright © 2013 John Wiley & Sons, Ltd.     

F‐bar aided edge‐based smoothed finite element method using tetrahedral elements for finite deformation analysisof nearly incompressible solids

A new smoothed finite element method (S‐FEM) with tetrahedral elements for finite strain analysis of nearly incompressible solids is proposed. The proposed method is basically a combination of the F‐bar method and edge‐based S‐FEM with tetrahedral elements (ES‐FEM‐T4) and is named ‘F‐barES‐FEM‐T4’. F‐barES‐FEM‐T4 inherits the accuracy and shear locking‐free property of ES‐FEM‐T4. At the same time, it also inherits the volumetric locking‐free property of the F‐bar method. The isovolumetric part of the deformation gradient ( F ^iso) is derived from the F of ES‐FEM‐T4, whereas the volumetric part ( F ^vol) is derived from the cyclic smoothing of J(=det( F )) between elements and nodes. Some demonstration analyses confirm that F‐barES‐FEM‐T4 with a sufficient number of cyclic smoothings suppresses the pressure oscillation in nearly incompressible materials successfully with no increase in DOF. Moreover, they reveal that our method is capable of relaxing the corner locking issue arising at the corner in the cylinder barreling analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

A coupled molecular dynamics and extended finite element method for dynamic crack propagation

A multiscale method is presented which couples a molecular dynamics approach for describing fracture at the crack tip with an extended finite element method for discretizing the remainder of the domain. After recalling the basic equations of molecular dynamics and continuum mechanics, the discretization is discussed for the continuum subdomain where the partition‐of‐unity property of finite element shape functions is used, since in this fashion the crack in the wake of its tip is naturally modelled as a traction‐free discontinuity. Next, the zonal coupling method between the atomistic and continuum models is recapitulated. Finally, it is discussed how the stress has been computed in the atomic subdomain, and a two‐dimensional computation is presented of dynamic fracture using the coupled model. The result shows multiple branching, which is reminiscent of recent results from simulations on dynamic fracture using cohesive‐zone models. Copyright © 2009 John Wiley & Sons, Ltd.