Synthesis of star–comb‐shaped polymer with porphyrin‐core and its self‐assembly behavior study

5,10,15,20‐tetra(4‐hydroxyphenyl)porphyrin (THPP) was synthesized by the condensation of pyrrole with 4‐hydroxybenzaldehyde in the presence of solvent (propionic acid). Subsequently, the resulting THPP was converted to a tetrafunctional star‐shaped macroinitiator (porphyrin‐Br₄) by esterification of it with 2‐bromopropanoyl bromide, and then atom transfer radical polymerization (ATRP) of styrene was conducted at 110°C with CuCl/2,2′‐bipyridine as the catalyst system. The resulting product was reacted with NBS to obtain star‐shaped initiator porphyrin‐(PSt‐Br)₄, which was used the following ATRP of the GMA to synthesize star–comb‐shaped grafted polymer porphyrin‐(PSt‐g‐PGMA)₄. The number molecular weight was 2.3 × 10⁴ g/mol, and the dispersity was narrow (M_w/M_n = 1.32). The structure of the polymers was investigated by NMR, UV–vis, IR, and GPC measurement. The self‐assembly behavior of the polymer porphyrin‐(PSt‐g‐PGMA)₄ was studied by DLS and AFM. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Molecular architectures of four‐arm star‐shaped styrene‐butadiene copolymer

To understand the molecular architectures of styrene‐butadiene four‐arm star (SBS) copolymers, a size exclusion chromatography combined with laser light scattering (SEC‐LLS) has been used to determine their weight‐average molecular weight (M_w) and radius of gyration (〈S²〉^1/2), and a new method for the establishment of the Mark‐Houwink equation from one sample has been developed. Based on the Flory viscosity theory, we successfully have reduced the 〈S²〉^1/2 values of numberless fractions estimated from many experimental points in the SEC chromatogram to intrinsic viscosities ([η]). For the first time, the dependences of 〈S²〉^1/2 and [η] on M_w for the four‐arm star SBS in tetrahydrofuran at 25°C were found, respectively, to be 〈S²〉^1/2 = 2.62 × 10^?2 M (nm) and [η] = 3.68 × 10^?2 M (mL/g) in the M_w range from 1.4 × 10⁵ to 3.0 × 10⁵. From data of [η] and 〈S²〉^1/2 for linear and star SBS, we have obtained the information about the branching, namely, the ratios (g and g′) of 〈S²〉 and [η] for star SBS to that of the linear SBS of the same molecular weight, which agree with theoretical predictions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 961–965, 2005     

Synthesis and characterization of a novel liquid crystalline star‐shaped polymer based on α‐CD core via ATRP

Well‐defined side‐chain liquid crystalline star‐shaped polymers were synthesized with a combination of the “core‐first” method and atom transfer radical polymerization (ATRP). Firstly, the functionalized macroinitiator based on the α‐Cyclodextrins (α‐CD) bearing functional bromide groups was synthesized, confirmed by ¹H‐NMR, MALDI‐TOF, and FTIR analysis. Secondly, the side‐chain liquid crystalline arms poly[6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate] (PMMAzo) were prepared by ATRP. The characterization of the star polymers were performed with ¹H‐NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). It was found that the liquid crystalline behavior of the star polymer α‐CD‐PMMAzo_n was similar to that of the linear homopolymer. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased as the molecular weight increased for most of these samples. All star‐shaped polymers show photoresponsive isomerization under the irradiation with Ultraviolet light. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Uniform star‐polystyrene nanoparticles prepared by emulsion atom transfer radical polymerization

Pentaerythritol (PT) was converted into four‐arm initiator pentaerythritol tetrakis(2‐chloropropionyl) (PT‐Cl) via reaction with 2‐chloropropionyl chloride. Uniform (monodisperse) star‐polystyrene nanoparticles were prepared by emulsion atom transfer radical polymerization of styrene, using PT‐Cl/CuCl/bpy (bpy is 2,2′‐dipyridyl) as the initiating system. The structures of PT‐Cl and polymer were characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance. The morphology, size and size distribution of the star‐polystyrene nanoparticles were characterized by transmission electron microscopy, atomic force microscopy and photon correlation spectroscopy. It was found that the average diameters of star‐polystyrene nanoparticles were smaller than 100 nm (30–90 nm) and monodisperse; moreover, the particle size could be controlled by the monomer/initiator ratio and the surfactant concentration. The average hydrodynamic diameter (D_h) of the nanoparticles increased gradually on increasing the ratio of styrene to PT‐Cl and decreased on enhancing the surfactant concentration or increasing the catalyst concentration. Copyright © 2011 Society of Chemical Industry     

Synthesis and characterization of three‐arm star‐shaped conjugated poly(3‐hexylthiophene)s: impact of the core structure on optical properties

Star‐shaped molecules consisting of regioregular poly(3‐hexylthiophene) (P3HT) chains as the arms, attached to either a propeller‐like triphenylamine or a planar triphenylbenzene core, have been synthesized via Suzuki coupling. The structures of the three‐arm star‐shaped poly(3‐hexylthiophene) (s‐P3HT) materials obtained were studied using Fourier transform infrared, ¹H and ¹³C NMR, XRD, gel permeation chromatography and DSC. The s‐P3HT polymers were soluble in common organic solvents and exhibited number‐average molecular weights of 6000–7200 g mol^?1. Their optical properties in solutions and in solid state films were investigated using the UV?visible absorption and photoluminescence techniques, and were compared with those of linear P3HT. © 2015 Society of Chemical Industry     

Synthesis of amphiphilic heteroarm star‐shaped polymer via free radical polymerization using polyfunctional chain transfer agent and its self‐assembly behavior

Amphiphilic heteroarm star‐shaped polymers have important theoretical and practical significance. In this work, amphiphilic heteroarm star‐shaped polymer was synthesized by the use of polyfunctional chain transfer agent via sequential free radical polymerization in two steps. First, conventional free radical polymerization of methyl methacrylate (MMA) initiated by 2,2′‐azobis (isobutyronitrile) (AIBN) was carried out in the presence of polyfunctional chain transfer agent, pentaerythritol‐tertrakis (3‐mercaptopropinate) (PETMP). At appropriate monomer conversion, about two‐arm s‐PMMA having two residual thiol groups at the chain center was obtained. Second, the s‐PMMA obtained above was used as macro‐chain‐transfer agent for free radical polymerization of acrylic acid (AA). The heteroarm star‐shaped polymer with the hydrophobic PMMA segment and the hydrophilic PAA segment was obtained. The successful synthesis of heteroarm star‐shaped polymers, (PMMA)₂(AA)₂, was confirmed by ¹H‐NMR and its self‐assembly behavior in different solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Chemoenzymatic synthesis of Y‐shaped amphiphilic block copolymers and their micellization behavior

BACKGROUND: Y‐shaped block copolymers are a type of special star polymer that have received considerable attention due to their unique morphologies and phase behavior. This research is based on the preparation of novel Y‐shaped block copolymers using enzymatic ring‐opening polymerization (eROP) and atom‐transfer radical polymerization (ATRP), followed by an investigation of their micellization properties. RESULTS: Y‐shaped block copolymers consisting of polycaprolactone and poly(glycidyl methacrylate) were synthesized successfully by the combination of eROP and ATRP. NMR, gel permeation chromatography (GPC), Fourier transform infrared and atomic force microscopy analyses confirmed the compositions of the block copolymers. The dispersity obtained from GPC was less than 1.4, which indicated a control of the polymerization. The self‐assembly behavior of the Y‐shaped block copolymers was investigated in aqueous media. Aggregates of various morphologies (such as spherical micelles, lamellae, worm‐like micelles and large compound micelles) were observed. In addition, it was found that both the copolymer composition and concentration in tetrahydrofuran greatly influenced the morphologies of the aggregates. CONCLUSION: The results suggest that the Y‐shaped diblock copolymers can be synthesized by simple methods. They have various morphologies, including normal spherical micelles, lamellae, worm‐like micelles and large compound micelles. Copyright © 2009 Society of Chemical Industry     

Synthesis of multi‐arm star polystyrene with hyperbranched polyester initiators by atom transfer radical polymerization

Multi‐arm star polystyrenes with hyperbranched polyester (HP3) core were prepared by atom transfer radical polymerization (ATRP). The structures of the polymers were investigated with FTIR and ¹H NMR. GPC results showed that the resultant polymers had relatively broad polydispersity indices that arouse from the macromolecular initiator (HP3‐Br). The thermal properties were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC analysis indicated that polystyrene star polymers had only the glass transition temperatures (T_g), which changes with the weight ratio of multi‐functional macroinitiator‐to‐monomer. In addition, these star polymers could form the spherical micelles in the selected solvent (THF/n‐hexane). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 728–733, 2006     

Synthesis of azobenzene‐functionalized two‐arm,three‐arm and four‐arm telomers using polyfunctional chain transfer agents

BACKGROUND: Star‐shaped polymers are very attractive because of their interesting properties such as reduced viscosity, good solubility, low glass transition temperature and fast response to external stimuli. The incorporation of azobenzene moieties in star‐shaped polymers could significantly widen their potential applications in various optical devices. One of the most important properties of the azobenzene chromophore is its reversible trans–cis photoisomerization induced by UV or visible light. Photoisomerization induces conformational changes in azopolymer chains, which in turn lead to macroscopic variations in chemical and physical properties of the surroundings and media. RESULTS: This study reports the synthesis of azobenzene‐functionalized two‐, three‐ and four‐arm telomers via free radical telomerization using the di‐, tri‐ and tetrafunctional chain transfer agents 1,2‐ and 1,4‐benzenedimethanethiol, trimethylolpropane‐tris(2‐mercaptoacetate) and pentaerythritol‐tetrakis(3‐mercaptopropionate), respectively, in the presence of azobisisobutyronitrile. Azotelomers were characterized using gel permeation chromatography and ¹H NMR and Fourier transform infrared spectroscopy. Thermal phase transition behaviors were investigated using differential scanning calorimetry and polarized optical microscopy. Azotelomers synthesized in this study showed reversible photoisomerization and a fast generation of birefringence. CONCLUSION: Considering the photoisomerization behavior and birefringence of the two‐, three‐ and four‐arm azotelomers, it can be concluded that they could be potential candidates for use in various optical devices. Copyright © 2009 Society of Chemical Industry     

Synthesis,characterization and surface properties of star‐shaped polymeric surfactants with polyhedral oligomeric silsesquioxane core

Star‐shaped amphiphilic polymeric surfactants comprising a hydrophobic polyhedral oligomeric silsesquioxane (POSS) core and hydrophilic poly(ethylene glycol) (PEG) arms with various chain lengths are successfully synthesized using copper(I)‐catalysed azide–alkyne cycloaddition (CuAAC) click reaction. Their chemical structures and molecular characteristics are clearly confirmed using Fourier transform infrared and ¹H NMR spectroscopies and gel permeation chromatography, and no homopolymer is found after CuAAC click reaction. Aqueous solutions of these star‐shaped polymers have been investigated using atomic force and transmission electron microscopies and dynamic light scattering studies and it is found that they can self‐assemble into micelles. The sizes of the micelles can be adjusted by the length of the PEG arms, where longer chains not only lead to increased micelle sizes, but also reduce the contact angle values. Moreover, the melting points and root mean square roughness of the obtained star‐shaped polymers are slightly increased on increasing the chain length of the PEG arms. © 2017 Society of Chemical Industry     

Water‐soluble macromolecular co‐assemblies of star‐shaped polyelectrolytes

This mini‐review reports on complex macromolecular architectures (interpolyelectrolyte complexes) based on star‐shaped polyelectrolytes. These complexes can be prepared in aqueous media via electrostatically driven co‐assembly of star‐shaped polyions (a) with oppositely charged linear homopolyelectrolytes or (b) with oppositely charged double hydrophilic (ionic/non‐ionic) diblock copolymers. In case (a), the complexes can be water‐soluble if the charge of the star‐shaped macromolecule is only partially compensated by a linear polyion. In case (b), the complexes retain their solubility in aqueous media even under a full charge compensation of the polymeric components. In both cases, the complex macromolecular architectures based on star‐shaped polyelectrolytes are characterized by a distinct compartmentalized structure of a micellar (‘core–corona’) type with an insoluble core, which is assembled from coupled monomer units of the oppositely charged polymeric components, and a hydrophilic, either ionic or non‐ionic, corona. Copyright © 2012 Society of Chemical Industry     

Solution properties of hyperbranched polymers and synthetic application for amphiphilic star‐hyperbranched copolymers by grafting from hyperbranched macroinitiator

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of N,N‐diethyldithiocarbamoylmethylstyrene (DTCS) as an inimer under UV irradiation. Branched PS with an average chain length between branching points of four styrene units was also prepared by living radical copolymerization of DTCS with styrene. The ratio of radius of gyration to hydrodynamic radius R_G/R_H for these hyperbranched polymers was in the range 0.82–0.89 in toluene. The translational diffusion coefficient D(C) showed a constant value in the range of 0–14 × 10^?3 g ml^?1 in toluene. It was found from these dilute solution properties that hyperbranched PSs formed a unimolecular structure even in a good solvent because of their compact nature. These hyperbranched PSs exhibited large amounts of photofunctional carbamate (DC) groups on their outside surfaces. Subsequently, we derived amphiphilic star‐hyperbranched copolymers by grafting from hyperbranched macroinitiator with 1‐vinyl‐2‐pyrrolidinone. These star‐hyperbranched copolymers were soluble in water and methanol. © 2001 Society of Chemical Industry     

Synthesis of amine‐functionalized block copolymers for nanopollutant removal from water

Polyamines are rare in literature owing to increased reactivity, sensitivity to air and moisture, low stability, and processing difficulties. Here, we report the synthesis and characterization of highly processable polyamines and use them for the removal of dissolved metallic nanoparticles from water. Three amphiphilic block polyamines such as poly(N‐aminoethyl acrylamide‐b‐styrene), poly(N‐aminopropyl acrylamide‐b‐styrene), and poly(N‐aminoxylyl acrylamide‐b‐styrene) have been synthesized using atom transfer radical polymerization of ethyl acrylate and styrene followed by aminolysis of the acrylic block. The polymerization and properties of the polymers are studied using different physicochemical techniques. Surface morphology of films prepared from these block copolymers by dissolving in different solvents such as chloroform, tetrahydrofuran and N,N‐dimethylformamide, and drop‐casting polymers on a glass substrate show interesting porous films and spherical nanostructures. In addition, the amine‐functionalized block copolymers have been used for the removal of nanoparticles from water and show high extraction efficiency toward silver (Ag) and gold (Au) nanoparticles. All three amine‐functionalized block copolymers show higher extraction capacities (Q_e) toward Au NPs (50–109 mg g^?1) and Ag NPs (99–117 mg g^?1). Our approach allows us to make amine‐functionalized block copolymers which are stable in air and can be easily processed in nonpolar solvents. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40943.     

Molecular weight and arm number of a star‐shaped styrene–butadiene block copolymer synthesized on a pilot‐vessel scale

To improve the rheological properties and processability of industrial rubbers, star‐shaped styrene–butadiene–styrene (SBS) block copolymers were synthesized and characterized in this work. Through the variation of the ratio of divinylbenzene to the diblock anion, a series of SBS samples with three to six arms were prepared. Multi‐angle laser light scattering (MALLS) and size exclusion chromatography (SEC) combined with light scattering (LS) were used to determine the weight‐average molecular weight (M_w), radius of gyration (〈S²〉^1/2), arm number, and chain conformation. The results from MALLS indicated that the M_w values of the star‐shaped SBS copolymers were 9.0, 13.0, 14.9, and 18.1 × 10⁴, which corresponded to three, four, five, and six arms, respectively. There was a lot of M_w and 〈S²〉^1/2 data for the many fractions in the SEC chromatograms of the SBS copolymers in tetrahydrofuran (THF) detected by LS, so the exponent of 〈S²〉^1/2 = KM_w^α was determined to range from 0.59 to 0.30 for the samples having three to six arms. An analysis of the results revealed that the star SBS copolymers existed in a sphere conformation in THF, and their chain density increased with an increase in the arm number. The viscosity of the six‐arm SBS copolymer was reduced significantly, compared with that of the SBS samples having three to five arms, when their M_w values were similar. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1853–1859, 2007     

Synthesis of well‐defined glycoconjugate polyacrylamides via preactivated polymers prepared by ATRP

Poly(N‐acryloxysuccinimide) (polyNAS) with narrow molecular weight distributions (MWD) applicable for the preparation of well‐defined glycoconjugate polyacrylamides were successfully prepared by atom transfer radical polymerization (ATRP). The structures of polyNAS were characterized by ¹H‐NMR and GPC. GPC results showed that the molecular weight polydispersity indices (PDI) range from 1.17 to 1.29. The molecular weights could be calculated based on ¹H‐NMR results but GPC results of polyNAS by using 0.01M LiBr/DMF did not give accurate molecular weights, probably because of the complex interaction in the system. The effects of free N‐hydroxysuccimide produced in the polymerization processes on the free‐radical concentrations and apparent initiation efficiencies of ATRP were discussed. Well‐defined glycoconjugate polyacrylamides (i.e., with narrow molecular weight distributions and designed glycoconjugate degrees) were prepared by substituting N‐oxysuccimide units with galactosamine followed by reaction of ethanolamine. The galactose conjugate degrees were determined by ¹H‐NMR and the total substitutions of N‐oxysuccimides were verified by ¹H‐NMR and FTIR. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 189–194, 2005     

Regulating the arm structure of star‐shaped polycarboxylate superplasticizers as a means to enhance cement paste workability

Star‐shaped superplasticizers, which incorporated polyol ester with unsaturated bond at their cores and bore comb‐type structures as their arms were synthesized via esterification‐copolymerization in aqueous phase from pentaerythritol, acrylic acid (AA), and isopentenyl oxy poly(ethylene glycol ether) (TPEG). The monomer ratios of AA and TPEG were varied and comonomer sodium methallyl sulfonate (SMAS) bearing short side chains was added to regulate the arm structure of star‐shaped polycarboxylate superplasticizers (SPCEs). The effects of the SPCEs on cement paste were investigated and the cement dispersion as well as early hydration mechanism were explored. As a main result, SPCEs with SMAS and certain molar ratios for anchoring groups and PEO side‐chains in their arm structure exhibited good paste dispersion and fluidity retention, which also delayed the early hydration process and prolonged both the initial and the final setting time. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46312.     

Facile synthesis and characterization of star‐shaped polystyrene: self‐condensing atom transfer radical copolymerization of N‐[4‐(α‐bromoisobutyryloxy)phenyl]maleimide and styrene

BACKGROUND: Generation of stars around in situ formed cores provides a facile approach to star‐shaped polymers. Therefore the self‐condensing atom transfer radical copolymerization (SCATRCP) of N‐[4‐(α‐bromoisobutyryloxy)phenyl]maleimide (BiBPM) and a large excess of styrene (St) was investigated. RESULTS: BiBPM and St formed a charge transfer complex (CTC), which underwent the SCATRCP, leading to the branched core initiating the atom transfer radical polymerization of St, finally giving star‐shaped polystyrene (PS). Kinetic and structural study showed that a higher dosage of BiBPM resulted in an enhanced polymerization rate, a higher degree of branching and a larger number of short PS arms. Differential scanning calorimetry suggested that the glass transition temperature of the star‐shaped PS decreased with molecular weight. Melt rheometry showed that even a slightly branched architecture of the PS led to a significantly lower viscosity; both the melt flow index and the activation energy increased with the degree of branching. CONCLUSION: Due to the preferential consumption of BiBPM and formation of a CTC, even a very low dosage of BiBPM could lead to star‐shaped PS, which, in comparison with linear analogues, could possess much better melt fluidity. Copyright © 2008 Society of Chemical Industry     

Synthesis of star‐shaped poly(ϵ‐caprolactone) by samarium‐based tetrafunctional initiator and its dilute‐solution properties

An in situ–generated tetrafunctional samarium enolate from the reduction of 1,1,1,1‐tetra(2‐bromoisobutyryloxymethyl)methane with divalent samarium complexes [Sm(PPh₂)₂ and SmI₂] in tetrahydrofuran has proven to initiate the ring‐opening polymerization of ?‐caprolactone (CL) giving star‐shaped aliphatic polyesters. The polymerization proceeded with quantitative conversions at room temperature in 2 h and exhibited good controllability of the molecular weight of polymer. The resulting four‐armed poly(?‐caprolactone) (PCL) was fractionated, and the dilute‐solution properties of the fractions were studied in tetrahydrofuran and toluene at 30°C. The Mark–Houwink relations for these solvents were [η] = 2.73 × 10^?2M_w^0.74 and [η] = 1.97 × 10^?2M_w^0.75, respectively. In addition, the unperturbed dimensions of the star‐shaped PCL systems were also evaluated, and a significant solvent effect was observed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 175–182, 2006     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Synthesis and characterization of star‐shaped poly(ethylene glycol)‐block‐poly(L‐lactic acid) copolymers by melt polycondensation

Compared with linear diblock or triblock poly(ethylene glycol)‐block‐poly(L ‐lactic acid) copolymer (PEG‐b‐PLLA), star‐shaped PEG‐b‐PLLA (sPEG‐b‐PLLA) copolymers exhibit smaller hydrodynamic radius and lower viscosity and are expected to display peculiar morphologies, thermal properties, and degradation profiles. Compared with the synthesis routine of PEG‐b‐PLLA form lactide and PEG, the traditional synthesis routine from LA and PEG were suffered by the low reaction efficiency, low purity, lower molecular weight, and wide molecular weight distribution. In this article, multiarm sPEG‐b‐PLLA copolymer was prepared from multiarm sPEG and L ‐lactic acid (LLA using an improved method of melt polycondensation, in which two types of sPEG, that is, sPEG₁ (four arm, Mn = 4300) and sPEG₂ (three arm, Mn = 3200) were chosen as the core. It was found the molecular weight of sPEG‐b‐PLLA could be strongly affected by the purity of LLA and sPEGs, and the purification technology of vacuum dewater and vacuum distillation could help to remove most of the impurities in commercial available LLA. The polymers, including sPEG and sPEG‐b‐PLLA with varied core (sPEG₁ and sPEG₂) and LLA/sPEG feeding ratios, were characterized and confirmed by ¹H‐NMR and ¹³C‐NMR spectroscopy, Fourier transform infrared spectroscopy (FT‐IR) and gel permeation chromatography, which showed that the terminal hydroxyl group in each arm of sPEGs had reacted with LLA to form sPEG‐b‐PLLA copolymers with fairly narrow molecular weight distribution. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011