Evaluation of solid dispersions of Clofazimine

Clofazimine (CLF) was formulated with polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) as a solid solid dispersion (SSD) to increase the aqueous solubility and dissolution rate of the drug. Different molecular weights of PEG (1500, 4000, 6000, and 9000 Da) and PVP (14,000 and 44,000 Da) were used in different drug:carrier weight ratios (1:1, 1:5, and 1:9) and their effect on the dissolution performance of the drug was evaluated in USP Type 2 apparatus using 0.1 N HCl medium. The dissolution rate was compared with corresponding physical mixtures, a currently marketed soft gelatin capsule product, and free CLF. The effect of different methods of preparation (solvent/melt) on the dissolution rate of CLF was evaluated for PEG solid dispersions. Saturation solubility and phase solubility studies were carried out to indicate drug:carrier interactions in liquid state. Infrared (IR) spectroscopy and X-ray diffraction (XRD) were used to indicate drug:carrier interactions in solid state. Improvement in the drug dissolution rate was observed in solid dispersion formulations as compared to the physical mixtures. The dissolution rate improved with the decreasing weight fraction of the drug in the formulation. Polyvinyl pyrrolidone solid dispersion systems gave a better drug release profile as compared to the corresponding PEG solid dispersions. The effect of molecular weight of the PEG polymers did not follow a definite trend, while PVP 14,000 gave a better dissolution profile as compared to PVP 44,000. Improvement in saturation solubility of the drug in the solid dispersion systems was noted in all cases. Further, IR spectroscopy indicated drug:carrier interactions in solid state in one case and XRD indicated reduction in the crystallinity of CLF in another. It was concluded that solid-dispersion formulations of Clofazimine can be used to design a solid dosage form of the drug, which would have significant advantages over the currently marketed soft gelatin capsule dosage form.     

Enhanced solubility of piperine using hydrophilic carrier-based potent solid dispersion systems

Context: Piperine alkaloid, an important constituent of black pepper, exhibits numerous therapeutic properties, whereas its usage as a drug is limited due to its poor solubility in aqueous medium, which leads to poor bioavailability.

Objective: Herein, a new method has been developed to improve the solubility of this drug based on the development of solid dispersions with improved dissolution rate using hydrophilic carriers such as sorbitol (Sor), polyethylene glycol (PEG) and polyvinyl pyrrolidone K30 (PVP) by solvent method. Physical mixtures of piperine and carriers were also prepared for comparison.

Methods: The physicochemical properties of the prepared solid dispersions were examined using SEM, TEM, DSC, XRD and FT-IR. In vitro dissolution profile of the solid dispersions was recorded and compared with that of the pure piperine and physical mixtures. The effect of these carriers on the aqueous solubility of piperine has been investigated.

Results: The solid dispersions of piperine with Sor, PEG and PVP exhibited superior performance for the dissolution of piperine with a drug release of 70%, 76% and 89%, respectively after 2?h compared to physical mixtures and pure piperine, which could be due to its transformation from crystalline to amorphous form as well as the attachment of hydrophilic carriers to the surface of poorly water-soluble piperine.

Conclusion: Results suggest that the piperine solid dispersions prepared with improved in vitro release exhibit potential advantage in delivering poorly water-soluble piperine as an oral supplement.     

Lonidamine Solid Dispersions: In Vitro and In Vivo Evaluation

ABSTRACT

Solid dispersions of lonidamine in PEG 4000 and PVP K 29/32 were prepared by the spray-drying method. Then, the binary systems were studied and characterized using differential scanning calorimetry, hot stage microscopy, and x-ray diffractometry. In vitro dissolution studies of the solid dispersed powders were performed to verify if any lonidamine dissolution rate or water solubility improvement occurred. In vivo tests were carried out on the solid dispersions and on the cyclodextrin inclusion complexes to verify if this lonidamine water solubility increase was really able to improve the in vivo drug plasma levels. Drug water solubility was increased by the solid dispersion formation, and the extent of increase depended on the polymer content of the powder. The greater increase of solubility corresponded to the highest content of polymer. Both the solid dispersions and the cyclodextrin complexes were able to improve the in vivo bioavailability of the lonidamine when administered per os. Particularly, the AUC of the drug plasma levels was increased from 1.5 to 1.9-fold depending on the type of carrier.     

Lonidamine solid dispersions: in vitro and in vivo evaluation

Solid dispersions of lonidamine in PEG 4000 and PVP K 29/32 were prepared by the spray-drying method. Then, the binary systems were studied and characterized using differential scanning calorimetry, hot stage microscopy, and x-ray diffractometry. In vitro dissolution studies of the solid dispersed powders were performed to verify if any lonidamine dissolution rate or water solubility improvement occurred. In vivo tests were carried out on the solid dispersions and on the cyclodextrin inclusion complexes to verify if this lonidamine water solubility increase was really able to improve the in vivo drug plasma levels. Drug water solubility was increased by the solid dispersion formation, and the extent of increase depended on the polymer content of the powder. The greater increase of solubility corresponded to the highest content of polymer. Both the solid dispersions and the cyclodextrin complexes were able to improve the in vivo bioavailability of the lonidamine when administered per os. Particularly, the AUC of the drug plasma levels was increased from 1.5 to 1.9-fold depending on the type of carrier.     

Retardation of Polymeric Carrier Dissolution by Dispersed Drugs: Factors Influencing the Dissolution of Solid Dispersions Containing Polyethlene Glycols

Molecular weight is an important determinant of plyethylene glycol (PEG) dissolution rate: the rate decreasing as the molecular weight is increased. PEG samples of equivalent nominal. molecular weight had different dissolution properties. Intrinsic viscosity and differential scanning calorimetry suggested that the observed differences my be related to molecular weight variation between samples. The dissolution rate of PEG from solid dispersions is retarded, the effect being dependent on the chemical nature of the drug and its concentration. Phenobarbitone was particularly potent in retarding PEG dissolution. Phenobarbitone dissolution rate was retarded from dispersions of high phenobarbitone content. However drug dissolution from solid dispersions low in phenobarbitone were greater than that of pure phenobarbitone. The low dissolution rates were explained in terms of formation of the 2:1 PEG monomer: phenobarbitone complex during solid dispersion formation. At high PEG weight fractions (i.e. 30:1, 50:1) drug dissolution was carrier controlled and although PEG dissolution was greatly suppressed, it was sufficiently large to transport the drug into solution at a rate greater than that of pure phenobarbitone.     

Retardation of Polymeric Carrier Dissolution by Dispersed Drugs: Factors Influencing the Dissolution of Solid Dispersions Containing Polyethlene Glycols

Molecular weight is an important determinant of plyethylene glycol (PEG) dissolution rate: the rate decreasing as the molecular weight is increased. PEG samples of equivalent nominal. molecular weight had different dissolution properties. Intrinsic viscosity and differential scanning calorimetry suggested that the observed differences my be related to molecular weight variation between samples. The dissolution rate of PEG from solid dispersions is retarded, the effect being dependent on the chemical nature of the drug and its concentration. Phenobarbitone was particularly potent in retarding PEG dissolution. Phenobarbitone dissolution rate was retarded from dispersions of high phenobarbitone content. However drug dissolution from solid dispersions low in phenobarbitone were greater than that of pure phenobarbitone. The low dissolution rates were explained in terms of formation of the 2:1 PEG monomer: phenobarbitone complex during solid dispersion formation. At high PEG weight fractions (i.e. 30:1, 50:1) drug dissolution was carrier controlled and although PEG dissolution was greatly suppressed, it was sufficiently large to transport the drug into solution at a rate greater than that of pure phenobarbitone.     

Solubility and Dissolution of Etoposide from Solid Dispersions of PEG 8000

The Solubility and dissolution of etoposide from solid dispersion of PEG 8000, prepared by the fusion method, were investigated. Stability studies revealed that the etoposide was stable in water for three days at 37 ± 0.5°C alone and as a physical mixture with PEG 8000. However, nearly 5% decomposition was oberved in aqueous solutions made from solid dispersions. TLC, IR and HPLC studies showed both the drug and carrier were stable during the fusion process. Aqueous solubility of etoposide from solid dispersions with etoposide: PEG 8000 ratios of 1:5, 1:10, 1:20, 1:30 and 1:40, was studied at 37 ± 0.5°C, and found to be significantly higher than that of etoposide alone or from its physical mixtures with PEG 8000. These dispersions increased the solubility of etoposide by 32.3%, 96.8%, 133.5%, 280.7% and 326.6% respectively compared to that of etoposide alone, whereas only 1:40 etoposide: PEG 8000 physical mixture demonstrated a significant increase in etoposide solubility (16.1%). Dissolution studies, on the solid dispersions in water at 37 ± 0.5°C, revealed a marked increase in the dissolution rate of etoposide from 1:20, 1:30 and 1:40 solid dispersions with 100% drug dissolving within 1 minute; dissolution time for 1:5 and 1:10 dispersions, and all physical mixtures was 3 minutes while etoposide alone required 30 minutes for complete drug dissolution. The melting behavior of the etoposide-PEG 8000 mixtures and subsequent thermal analysis of the melts suggested that the increase of solubility of etoposide was mostly due to the formation of a solid solution of etoposide in PEG 8000.     

Development of solid dispersions of β-lapachone in PEG and PVP by solvent evaporation method

β-lapachone (βlap) has shown potential use in various medical applications. However, its poor solubility has limited its systemic administration and clinical applications. The aim of this work is to develop solid dispersions of βlap using poly (ethylene glycol) (PEG 6000) and polyvinylpyrrolidone (PVP K30) as hydrophilic polymers and evaluate the dissolution rate in aqueous medium. Solid dispersions were prepared by solvent evaporation method using different weight ratios of βlap and hydrophilic polymer (1:1, 1:2, and 1:3). Characterization performed by differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy showed that βlap was molecularly dispersed within the polymer matrix. The in vitro dissolution tests showed an enhancement in the dissolution profile of βlap as solid dispersions prepared in both PVP and PEG, although the former showed better results. The drug:polymer ratio influenced βlap dissolution rate, as higher amounts of hydrophilic polymer led to enhanced drug dissolution. Thus, this study demonstrated that solid dispersions of βlap in PVP offers an effective way to overcome the poor dissolution of βlap.     

Enhanced Dissolution of Ursodeoxycholic Acid from the Solid Dispersion

Abstract

Solid dispersions of a very slightly water-solubte drug, ursodeoxycholic acid (UDCA), were prepared using urea, mannitol, and PEG 6000 as a carrier, and the solubility of UDCA was determined in water-ethanol (1:1) mixed solvent as a function of UDCA-carrier ratio. The solubility of UDCA was slightly improved when urea or PEG 6000 was used as a carrier. The powder x-ray diffraction measurements revealed that UDCA did not exist in the crystalline state in the solid dispersions. Differential scanning calorimetry (DSC) studies showed that UDCA was able to dissolve in the melt of urea, mannitol, and PEG 6000. The effect of carriers of solid dispersions on the UDCA dissolution rate was examined. The dissolution rate of UDCA was markedly increased from the solid dispersions of urea, PEG 6000, and mannitol, respectively.     

Enhanced Dissolution of Ursodeoxycholic Acid from the Solid Dispersion

Solid dispersions of a very slightly water-solubte drug, ursodeoxycholic acid (UDCA), were prepared using urea, mannitol, and PEG 6000 as a carrier, and the solubility of UDCA was determined in water-ethanol (1:1) mixed solvent as a function of UDCA-carrier ratio. The solubility of UDCA was slightly improved when urea or PEG 6000 was used as a carrier. The powder x-ray diffraction measurements revealed that UDCA did not exist in the crystalline state in the solid dispersions. Differential scanning calorimetry (DSC) studies showed that UDCA was able to dissolve in the melt of urea, mannitol, and PEG 6000. The effect of carriers of solid dispersions on the UDCA dissolution rate was examined. The dissolution rate of UDCA was markedly increased from the solid dispersions of urea, PEG 6000, and mannitol, respectively.     

Dissolution of Nalidixic Acid Solid Dispersions: Systems of NAL-Inclusion and Linear Polymeric Compounds

The solubility and dissolution rate enhancement of nalidixic acid powder, applying solid dispersion technique, with inclusion and linear polymeric compounds were studied. At 100 g/L carrier concentration, the increase in drug solubility was 3.3, 2.0, 1.4 and 1.1 times that of the powdered drug for urea, PEG 4000, PEG 6000 and PVP, respectively. The increase in carrier ratio enhanced the drug dissolution. At four fold carrier concentrations, the amount dissoluted after one hour was 50, 55 mg/L for samples prepared by fusion with urea and PEG 6000, respectively. The coprecipitation with FTP dissoluted 65 mg/L of nalidixic acid after one hour compared to only 27.5 mg/L of powdered drug alone.     

Dissolution Rates of Carbamazepine and Nitrazepam Utilizing Sugar Solid Dispersion System

Abstract

The dissolution of carbamazepine and nitrazepam from Its solid dispersions using anhydrous lactose, mannitol, galactose, PEG 6000 and coprecipitate using polyvinylpyrrolidone (PVP) 40,000 was investigated. The dissolution process of capsules containing either carbamazepine or nitrazepam as solid dispersion or coprecipitate followed an apparent first order process. The combination of carbamazepine with sugars (mannitol, lactose, and galactose) caused, in every case, an increase in the dissolution rate of the drug. Carbamazepine-PVP coprecipitate gave the higher dissolution rate than that of the solid dispersions with sugars and PEG 6000. Nitrazepam-lactose system gave higher dissolution rate than the other dispersions and coprecipitate. This enhancement in dissolution rate was much more obvious for the solid dispersions and coprecipitate than for the physical mixtures.     

In vitro and in vivo studies on a novel solid dispersion of repaglinide using polyvinylpyrrolidone as the carrier

In order to improve the dissolution and absorption of the water insoluble drug repaglinide, a solid dispersion was developed by solvent method using polyvinylpyrrolidone K30 (PVP K30) as the hydrophilic carrier for the first time. Studies indicated that both solubility and the dissolution rate of repaglinide were significantly increased in the solid dispersion system compared with that of repaglinide raw material or physical mixtures. The repaglinide solid dispersions with PVP K30 solid state was characterized by polarizing microscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). DSC and XRD studies indicated that repaglinide existed in an amorphous form in the solid dispersion. FT-IR analysis demonstrated the presence of intermolecular hydrogen bonding between repaglinide and PVP K30 in the solid dispersion. In the in situ gastrointestinal perfusion experiment, solid dispersion was shown to remarkably enhance the absorption of repaglinide in stomach and all segments of intestine. In vivo pharmacokinetic study in rats showed that immediate and complete release of repaglinide from the solid dispersion resulted in rapid absorption that significantly increased the bioavailability and the maximum plasma concentration over repaglinide raw material. These results demonstrated PVP K30 was an appropriate carrier for solid dispersion of repaglinide, with increased dissolution and oral absorption.     

Dissolution of Nalidixic Acid Solid Dispersions: Systems of NAL-Inclusion and Linear Polymeric Compounds

Abstract

The solubility and dissolution rate enhancement of nalidixic acid powder, applying solid dispersion technique, with inclusion and linear polymeric compounds were studied. At 100 g/L carrier concentration, the increase in drug solubility was 3.3, 2.0, 1.4 and 1.1 times that of the powdered drug for urea, PEG 4000, PEG 6000 and PVP, respectively. The increase in carrier ratio enhanced the drug dissolution. At four fold carrier concentrations, the amount dissoluted after one hour was 50, 55 mg/L for samples prepared by fusion with urea and PEG 6000, respectively. The coprecipitation with FTP dissoluted 65 mg/L of nalidixic acid after one hour compared to only 27.5 mg/L of powdered drug alone.     

In vitro and in vivo studies on a novel solid dispersion of repaglinide using polyvinylpyrrolidone as the carrier

In order to improve the dissolution and absorption of the water insoluble drug repaglinide, a solid dispersion was developed by solvent method using polyvinylpyrrolidone K30 (PVP K30) as the hydrophilic carrier for the first time. Studies indicated that both solubility and the dissolution rate of repaglinide were significantly increased in the solid dispersion system compared with that of repaglinide raw material or physical mixtures. The repaglinide solid dispersions with PVP K30 solid state was characterized by polarizing microscopy, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). DSC and XRD studies indicated that repaglinide existed in an amorphous form in the solid dispersion. FT-IR analysis demonstrated the presence of intermolecular hydrogen bonding between repaglinide and PVP K30 in the solid dispersion. In the in situ gastrointestinal perfusion experiment, solid dispersion was shown to remarkably enhance the absorption of repaglinide in stomach and all segments of intestine. In vivo pharmacokinetic study in rats showed that immediate and complete release of repaglinide from the solid dispersion resulted in rapid absorption that significantly increased the bioavailability and the maximum plasma concentration over repaglinide raw material. These results demonstrated PVP K30 was an appropriate carrier for solid dispersion of repaglinide, with increased dissolution and oral absorption.     

Solid Carriers for Improved Solubility of Glipizide in Osmotically Controlled Oral Drug Delivery System

The purpose of this study was to increase the solubility of glipizide (gli) by solid dispersions SDs technique with polyvinylpyrrolidone (PVP) in aqueous media. The gli–PVP solid dispersion systems was prepared by physical mixing or spray drying method, and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transformation-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The elementary osmotic pumps (EOPs) were prepared with gli–PVP complex and the effect of the PVP percentages on the enhancing of gli dissolution rate was studied. The influences of various parameters e.g., drug- PVP ratio, level of solubility modifier, coating weight gain and diameter of drug releasing orifice on drug release profiles were also investigated. The solubility and dissolution rates of gli were significantly increased by solid dispersion using spray dried method as well as their physical mixture. The obtained results indicated that gli–PVP solid dispersion system has suitable solubility behavior in EOP tablets.     

Solid carriers for improved solubility of glipizide in osmotically controlled oral drug delivery system

The purpose of this study was to increase the solubility of glipizide (gli) by solid dispersions SDs technique with polyvinylpyrrolidone (PVP) in aqueous media. The gli-PVP solid dispersion systems was prepared by physical mixing or spray drying method, and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD) analysis, Fourier transformation-infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The elementary osmotic pumps (EOPs) were prepared with gli-PVP complex and the effect of the PVP percentages on the enhancing of gli dissolution rate was studied. The influences of various parameters e.g., drug- PVP ratio, level of solubility modifier, coating weight gain and diameter of drug releasing orifice on drug release profiles were also investigated. The solubility and dissolution rates of gli were significantly increased by solid dispersion using spray dried method as well as their physical mixture. The obtained results indicated that gli-PVP solid dispersion system has suitable solubility behavior in EOP tablets.     

Characterization of solid dispersions of Patchouli alcohol with different polymers: effects on the inhibition of reprecipitation and the improvement of dissolution rate

Solid dispersion technique is known to be an effective approach for the polymer to keep drugs stable in the solid state, thereby improving the dissolution rate and oral bioavailability through inhibiting reprecipitation in supersaturated solution. In this study, to evaluate the inhibitory effect of polyethylene glycol-6000 (PEG), Polyvinylpyrrolidone K30 (PVP) and Aminoalkyl methacrylate copolymer (Eudragit), the reprecipitation profiles were observed from supersaturated solutions of Patchouli alcohol (PA) in the presence and absence of the polymers. Furthermore, the dissolution profiles of PA solid dispersions formulated with PEG, PVP or Eudragit were compared for investigating the effect on improving dissolution of each polymer. Solid dispersions formulated with Eudragit were found to result in solution with the highest extent of supersaturation. By contrast, PEG and PVP were less effective. At equivalent supersaturation, all three polymers are capable of mitigating reprecipitation relative to that of PA alone. In addition, in the PA solid dispersion with Eudragit (E-SD (1/3)), the highest concentration of supersaturation of PA was maintained for prolonged time. These results unambiguously indicate that it is imperative to select the appropriate polymer and drug/polymer ratio in addition to considering the stability of the supersaturated solution, which was generated following dissolution of amorphous solid dispersion.     

Enhancement of Dissolution of Ethopropazine Using Solid Dispersions Prepared with Phospholipid and/or Polyethylene Glycol

The purpose of this study was to improve the dissolution properties of a poorly water soluble and bioavailable drug, ethopropazine HCl (ET), by incorporating the drug in three different types of solid dispersion systems. Solid dispersions of ET were prepared using 1:1 (w/w) ratios of (1) phospholipid (1,2 dimyristoyl-sn-glycerophosphocholine) (DMPC), (2) polyethylene glycol 8000 (PEG8000), and (3) a novel combination of both DMPC and PEG8000. Using the solvent method of preparation, ET and DMPC and/or PEG were dissolved in chloroform, and solvent subsequently was evaporated using nitrogen gas. The resulting solid dispersion(s) was passed through a 60-mesh sieve. Characterization of ET/DMPC solid dispersion was performed by differential scanning calorimetry (DSC) and X-ray diffractometry studies. Dissolution studies conducted in phosphate buffered saline (PBS) (pH 7.4, 37°C ± 0.5°C) using the USP type II (paddle) dissolution apparatus showed significant increases in the dissolution rate of ET with all the solid dispersions in this study. Specifically, within the first 5 min (D5), solid dispersions containing ET/DMPC (1:1) showed an eightfold increase in dissolution; in combination with DMPC and PEG8000 (1:1), there was an approximately sixfold increase; and a fourfold increase was observed with PEG8000 (1:1). Complete dissolution of all solid dispersions occurred within 60 min (D60) of the run. Storage of the ET/DMPC sample for over 4.5 months revealed a decrease in the dissolution rate when compared to freshly prepared sample. Overall, it was concluded that the dissolution rate of ET significantly improved when dispersed in all the selected carrier systems. However, the solid dispersion of ET/DMPC was observed to be superior to the other combinations used.     

Enhancement of Dissolution of Ethopropazine Using Solid Dispersions Prepared with Phospholipid and/or Polyethylene Glycol

The purpose of this study was to improve the dissolution properties of a poorly water soluble and bioavailable drug, ethopropazine HCl (ET), by incorporating the drug in three different types of solid dispersion systems. Solid dispersions of ET were prepared using 1:1 (w/w) ratios of (1) phospholipid (1,2 dimyristoyl-sn-glycerophosphocholine) (DMPC), (2) polyethylene glycol 8000 (PEG8000), and (3) a novel combination of both DMPC and PEG8000. Using the solvent method of preparation, ET and DMPC and/or PEG were dissolved in chloroform, and solvent subsequently was evaporated using nitrogen gas. The resulting solid dispersion(s) was passed through a 60-mesh sieve. Characterization of ET/DMPC solid dispersion was performed by differential scanning calorimetry (DSC) and X-ray diffractometry studies. Dissolution studies conducted in phosphate buffered saline (PBS) (pH 7.4, 37°C ± 0.5°C) using the USP type II (paddle) dissolution apparatus showed significant increases in the dissolution rate of ET with all the solid dispersions in this study. Specifically, within the first 5 min (D5), solid dispersions containing ET/DMPC (1:1) showed an eightfold increase in dissolution; in combination with DMPC and PEG8000 (1:1), there was an approximately sixfold increase; and a fourfold increase was observed with PEG8000 (1:1). Complete dissolution of all solid dispersions occurred within 60 min (D60) of the run. Storage of the ET/DMPC sample for over 4.5 months revealed a decrease in the dissolution rate when compared to freshly prepared sample. Overall, it was concluded that the dissolution rate of ET significantly improved when dispersed in all the selected carrier systems. However, the solid dispersion of ET/DMPC was observed to be superior to the other combinations used.