Oral sustained-release bioadhesive tablet formulation of didanosine

The objective of this study was to formulate a hydrogel-forming bioadhesive drug delivery system for oral administration of didanosine (ddI). The aim of this tablet dosage form is to improve the oral absorption of ddI by delivering it in small doses over an extended period and localizing it in the intestine by bioadhesion. Compressed tablets of ddI using Polyox® WSRN-303, Carbopol® 974P-NF, and Methocel® K4M as the bioadhesive release rate-controlling polymers were prepared. The effect of polymer concentration on the release profile and in vitro bioadhesion of the matrix tablets was studied. Tablet formulations with Polyox WSRN-303 (10%) and Methocel K4M (30%) showed 93 and 90% drug release, respectively, after 12 h. The drug release was found to be linear when fitted in the Higuchi equation (square-root time equation), suggesting zero-order release. Carbopol 974-P-NF was found to inhibit the complete release of ddI because of drug-polymer interaction; hence, is not suitable for formulation of ddI. Drug diffusion and swelling of the polymer (anomalous Fickian release) was found dominant in ddI release. In general, in vitro bioadhesion increased with an increase in polymer concentration. Tablets containing a single polymer can be designed to form hydrogels serving the dual purpose of bioadhesion and sustained release.     

Formulation and evaluation of Methocel K15M bioadhesive matrix tablets

Methocel K15M is a bioadhesive polymer. Its adhesion and bioadhesion characteristics were evaluated by shear stress measurement and detachment force measurement methods, respectively. The effect of pH on adhesion was studied, and it was found that the maximum adhesion was between pH 5 and pH 6. Adhesion strength at different parts of the sheep intestine was studied; in the duodenal portion of the intestine, the adhesion was maximum. Chlorpheniramine maleate and diclofenac sodium drugs are formulated with Methocel K15M as matrix tablets. In vitro release studies revealed that some of the formulations showed initial first-order behavior followed by zero-order release behavior.     

Formulation and Evaluation of Methocel K15M Bioadhesive Matrix Tablets

Methocel K15M is a bioadhesive polymer. Its adhesion and bioadhesion characteristics were evaluated by shear stress measurement and detachment force measurement methods, respectively. The effect of pH on adhesion was studied, and it was found that the maximum adhesion was between pH 5 and pH 6. Adhesion strength at different parts of the sheep intestine was studied; in the duodenal portion of the intestine, the adhesion was maximum. Chlorpheniramine maleate and diclofenac sodium drugs are formulated with Methocel K15M as matrix tablets. In vitro release studies revealed that some of the formulations showed initial first-order behavior followed by zero-order release behavior.     

Development of Controlled-Release Buccoadhesive Hydrophilic Matrices of Diltiazem Hydrochloride: Optimization of Bioadhesion,Dissolution, and Diffusion Parameters

ABSTRACT

Buccoadhesives have long been employed to improve the bioavailability of drugs undergoing significant hepatic first-pass metabolism. Diltiazem hydrochloride (DLZ) is also reported to have low oral bioavailability due to an extensive hepatic first-pass effect. Controlled-release buccoadhesive hydrophilic matrices containing DLZ were prepared using a 3² factorial design. Amounts of Carbopol® 934P (CP) and Methocel® K100LV (HPMC) were taken as the formulation variables (factors) for optimizing bioadhesion, and kinetics of dissolution and diffusion. A mathematical model was generated for each response parameter. Bioadhesive strength tended to vary quite linearly in increasing order with increasing amount of each polymer. The drug release pattern for all the formulation combinations was found to be non-fickian, approaching zero-order kinetics. The values of permeation coefficient tended to vary non-linearly with polymer amount, depicting the plausibility of interaction between the two polymers. Suitable combinations of the two polymers provided adequate bioadhesive strength and a fairly regulated release profile up to 10 hr. The response surfaces and contour plots for each response parameter are presented for further interpretation of the results. The optimum formulations were chosen and their predicted results found to be in close agreement with experimental findings.     

Development of Novel Sustained Release Bioadhesive Vaginal Tablets of Povidone Iodine

Iodine has long been used as an antiseptic for the prevention and treatment of vaginal infections. The present study was aimed at the development of rapidly disintegrating, bioadhesive and sustained release vaginal tablets of an iodophore, polyvinylpyrrolidone (povidone iodine), their evaluation and comparison with the marketed formulations. The formulation development included drug-excipient compatibility studies, optimization of performance parameters like disintegration time, bioadhesion and drug release profile and comparison of physical properties and performance parameters with the marketed formulation. The developed formulation provided a sustained release of polymer complexed iodine (up to 8 hrs), rapid disintegration (< 1 min.), desired bioadhesive properties and retention for a prolonged time.     

Development of novel sustained release bioadhesive vaginal tablets of povidone iodine

Iodine has long been used as an antiseptic for the prevention and treatment of vaginal infections. The present study was aimed at the development of rapidly disintegrating, bioadhesive and sustained release vaginal tablets of an iodophore, polyvinylpyrrolidone (povidone iodine), their evaluation and comparison with the marketed formulations. The formulation development included drug-excipient compatibility studies, optimization of performance parameters like disintegration time, bioadhesion and drug release profile and comparison of physical properties and performance parameters with the marketed formulation. The developed formulation provided a sustained release of polymer complexed iodine (up to 8 hrs), rapid disintegration (< 1 min.), desired bioadhesive properties and retention for a prolonged time.     

Testing of Drug Release from Bioadhesive Vaginal Tablets

Abstract

To establish en in vitro test method that can predict the drug release and dissolution behaviour of vaginal bioadhesive controlled release tablets, a system was developed and its appropriateness to the in situ conditions was examined. For this purpose, the dissolution rates of vaginal bioadhesive tablets were measured by three different methods. These were, USP dissolution apparatus two and a new vaginal dissolution tester (NVDT) which was developed by us with some modification of the vaginal tablet desentegration apparatus of BP 1988 and, testing in cow vaginas in situ. Four different bioadhesive tablet formulations were used being composed of the drug and the anionic polymer, polyacrylic acid (PAA) and the nonionic polymers, hydroxypropylmethyl cellulose (HPMC) and ethyIcellulose (EC). The release profiles of the in vitro and in situ methods were investigated and evaluated kinetically.

It was found that NVDT could be used to investigate the drug release from vaginal tablets.     

Design,Development, and Biopharmaceutical Properties of Buccoadhesive Compacts of Pentazocine

Buccoadhesive compacts (BCs) of pentazocine (PZ) were prepared by the direct compression method using polymers like carbopol 974P (CP 974P) and hydroxypropyl methylcellulose (HPMC K4M) in ratios of 1:0 (batch B₁), 1:1 (B₂), 1:2 (B₃), 1:4 (B₄), and 0:1 (B₅). The compacts were evaluated for thickness uniformity, weight variation, drug content uniformity, and swelling index. Swelling was increased with an increase in HMPC K4M content in the compacts. An in vitro assembly was developed to measure and compare the bioadhesive strength of compacts. The maximum bioadhesive strength was observed in compacts formulated with a combination of CP 974P and HPMC K4M. The compacts were evaluated in vitro for 24 hr in pH 6.6 phosphate buffer using a standardized dissolution apparatus. The data were evaluated by a simple power equation (M_t/M_∞ = Ktⁿ); it was observed that all the compacts followed non-Fickian release kinetics. Some of the buccoadhesive compacts were evaluated in vivo in rabbits. The compacts gave controlled blood level profiles with a twofold to threefold increase in area-under-the-curve (AUC) values in comparison to oral administration of aqueous drug solution.     

Design, Development, and Biopharmaceutical Properties of Buccoadhesive Compacts of Pentazocine

Buccoadhesive compacts (BCs) of pentazocine (PZ) were prepared by the direct compression method using polymers like carbopol 974P (CP 974P) and hydroxypropyl methylcellulose (HPMC K4M) in ratios of 1:0 (batch B₁), 1:1 (B₂), 1:2 (B₃), 1:4 (B₄), and 0:1 (B₅). The compacts were evaluated for thickness uniformity, weight variation, drug content uniformity, and swelling index. Swelling was increased with an increase in HMPC K4M content in the compacts. An in vitro assembly was developed to measure and compare the bioadhesive strength of compacts. The maximum bioadhesive strength was observed in compacts formulated with a combination of CP 974P and HPMC K4M. The compacts were evaluated in vitro for 24 hr in pH 6.6 phosphate buffer using a standardized dissolution apparatus. The data were evaluated by a simple power equation (M_t/M_∞ = Ktⁿ); it was observed that all the compacts followed non-Fickian release kinetics. Some of the buccoadhesive compacts were evaluated in vivo in rabbits. The compacts gave controlled blood level profiles with a twofold to threefold increase in area-under-the-curve (AUC) values in comparison to oral administration of aqueous drug solution.     

Testing of Drug Release from Bioadhesive Vaginal Tablets

To establish en in vitro test method that can predict the drug release and dissolution behaviour of vaginal bioadhesive controlled release tablets, a system was developed and its appropriateness to the in situ conditions was examined. For this purpose, the dissolution rates of vaginal bioadhesive tablets were measured by three different methods. These were, USP dissolution apparatus two and a new vaginal dissolution tester (NVDT) which was developed by us with some modification of the vaginal tablet desentegration apparatus of BP 1988 and, testing in cow vaginas in situ. Four different bioadhesive tablet formulations were used being composed of the drug and the anionic polymer, polyacrylic acid (PAA) and the nonionic polymers, hydroxypropylmethyl cellulose (HPMC) and ethyIcellulose (EC). The release profiles of the in vitro and in situ methods were investigated and evaluated kinetically.

It was found that NVDT could be used to investigate the drug release from vaginal tablets.     

Rheological,mechanical, and bioadhesive behavior of hydrogels to optimize skin delivery systems

Background: Hydrogels are widely used for cutaneous formulations; thereby comparing the bioadhesive properties of polymers with a view to prolong the residence time of topical drugs on the skin would be very useful to design novel topical drug delivery systems.

Aim: The objective of this study was to correlate data from rheological studies and texture profile analysis, with bioadhesion on the skin.

Methods: Polyacrylic acid polymers used were carbomer homopolymer type A (C971) and type B (C974), and polycarbophil (PP) dispersed in water at various concentrations (0.1, 0.5, 1.0, 1.5, 2.0, 3.0, 5.0%, w/v). Rheological, texture, and bioadhesive properties were determined to compare the hydrogels.

Results: Rheological analysis showed that all samples exhibited pseudoplastic behavior with thixotropy. Texture profile analysis showed that compressibility, hardness, and adhesiveness of the hydrogels were dependent on the polymer concentration, and the cohesion values were high. Bioadhesion of C974 and PP at 0.5 and 2% was of the same magnitude, while all samples of C971 had lower values. The bioadhesion of 5% C974 was the highest, while that 5% PP was lower, possibly because PP showed the greatest hardness and this rigidity may decrease the interaction of the polymer with the skin.

Conclusion: A comprehensive comparative rheological and textural analyses of several polymers for topical systems were undertaken in terms of their bioadhesion. Therefore, it is possible to conclude that these polymers can be used for optimization of drug delivery systems on the skin.     

Effect of polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer on bioadhesion and release rate property of eplerenone pellets

Abstract

The present study involved the design and development of oral bioadhesive pellets of eplerenone. A solid dispersion of eplerenone was developed with a hydrophilic carrier, polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus^®). Bioadhesive pellets were prepared from this solid dispersion using a combination of HPMC K4M and Carbopol 934P. Both the solid dispersion and the pellets were evaluated for various physicochemical properties such as solubility, entrapment efficiency, drug content, surface morphology, mucoadhesion and swelling behavior. Analysis carried out using FT-IR, DSC and XRD found no interaction between the eplerenone and excipients. The solid dispersion had irregular-shaped smooth-surfaced particles of diameter 265?±?105.5?μm. In TEM analysis, eplerenone particles of size 79–120?nm were found. The solubility and dissolution of eplerenone in the Soluplus^®-based solid dispersion were 5.26 and 2.50 times greater, respectively. Investigation of the swelling behavior of the pellets showed that the thickness of the gel layer increased continuously over the duration of the study. Moreover, a correlation was observed between the thickness and strength of the gel layer and the percentage release. The mechanism of drug release was found to be non-Fickian (anomalous), with the release kinetics approaching first-order kinetics. The bioavailability of the eplerenone bioadhesive pellet formulation was studied using Wistar rats and was found to be improved. An in vivo mucoadhesion study showed that the pellets are retained for 24?h in rabbits. It was concluded that Soluplus^® had a positive effect on the solubility and dissolution of pellets without affecting the bioadhesion.     

In vitro evaluation of gentamicin- and vancomycin-containing minitablets as a replacement for fortified eye drops

Objective: Ocular bioadhesive minitablets containing gentamicin and vancomycin were developed using different powder mixtures of pregelatinized starch and Carbopol (physical or cospray-dried mixtures). Methods: Drug content, antimicrobial activity, and radical formation of the powders used for tablet preparation were evaluated immediately and 30 days after gamma sterilization. Tablet properties and in vitro drug release from the sterilized minitablets were determined. Storage stability of vancomycin and gentamicin in sterilized bioadhesive mixtures was examined by LC–UV/MS and a microbiological assay, respectively. A bioadhesive powder mixture containing only vancomycin was irradiated by X electron-magnetic radiation to evaluate vancomycin stability following sterilization through irradiation. Results: The antimicrobial activity of gentamicin against Staphylococcus epidermidis was not altered in comparison to nonsterilized formulations. Only after an overkill dose of 50 kGy, the concentration of vancomycin decreases to an extent that was pharmaceutically significant. No significant difference in radiation stability between drug substance and product (i.e., powder mixture) was observed. A shift in stability profile was not observed at 6 weeks after irradiation. All other degradation products were present only in small quantities not exceeding 1.0%. The in vitro drug release from the minitablets prepared with physical powder mixtures of pregelatinized starch and Carbopol® 974P NF (96 : 4) was faster compared to the cospray-dried mixtures of starch with Carbopol® 974P NF (ratio: 95:5 and 85:15). The electron paramagnetic resonance signals of the radicals formed during sterilization were still visible after storage for 30 days. The slug mucosal irritation test indicated mild irritation properties of the bioadhesive powder mixtures although no tissue damage was observed.     

Design and in vitro characterization of buccoadhesive tablets of timolol maleate

Objective: The purpose of this work was to develop and evaluate buccoadhesive tablets of timolol maleate (TM) due to its potential to circumvent the first-pass metabolism and to improve its bioavailability.

Methods: The tablets were prepared by direct compression using two release modifying polymers, Carbopol 974P (Cp-974p) and sodium alginate (SA). A 3² full factorial design was employed to study the effect of independent variables, Cp-974p and SA, in various proportions in percent w/w, which influences the in vitro drug release and bioadhesive strengths. Physicochemical properties of the drug were evaluated by ultraviolet, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder X-ray diffraction (P-XRD). Tablets were evaluated for hardness, thickness, weight variation, drug content, surface pH, swelling index, bioadhesive force and in vitro drug release.

Results: The FTIR and DSC studies showed no evidence of interactions between drug, polymers and excipients. The P-XRD study revealed that crystallinity of TM remain unchanged in optimized formulation tablet. Formulation F9 achieves an in vitro drug release of 98.967%?±?0.28 at 8?h and a bioadhesive force of 0.088 N?±?0.01211.

Conclusion: We successfully developed buccal tablet formulations of TM and describe a non-Fickian-type anomalous transport as the release mechanism.     

Testing of drug release from bioadhesive vaginal tablets

To establish an in vitro test method that can predict the drug release and dissolution behaviour of vaginal bioadhesive controlled release tablets, a system was developed and its appropriateness to the in situ conditions was examined. For this purpose, the dissolution rates of vaginal bioadhesive tablets were measured by three different methods. These were, USF dissolution tester apparatus two and a new vaginal dissolution tester (NVDT) which was developed by us with some modification of the vaginal tablet desentegration apparatus of BP 1988 and, testing in cow vaginas in situ. Four different bioadhesive tablet formulations were used being composed of the drug and the anionic polymer, polyacrylic acid (PAA) and the nonionic polymers, hydroxypropylmethyl cellulose (HPMC) and ethycellulose (EC). The release profiles of the in vitro and in situ methods were ivestigated and evaluated kinetically     

Buccal Bioadhesive Delivery System of 5-Fluorouracil: Optimization and Characterization

The objective of this work was to apply the response surface approach in the development of buccal bioadhesive tablets of 5-fluorouracil (5-FU). Experiments were performed according to a 3² factorial design to evaluate the effects of two polymers, Gantrez MS-955 (X₁) and hydroxypropylmethyl cellulose (HPMC) K15M (X₂) on the bioadhesive force, percentage drug release in 8 h (Rel_{8 h}), time taken for 50% drug release (t_50%), and diffusion coefficient (n). The effect of the two independent variables on the response variables was studied by response surface plots and contour plots generated by the Design Expert® software. The compatibility between 5-FU and the tablet excipients was confirmed by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) studies. Both the polymers were found to have synergistic effect on bioadhesion but the effect of Gantrez was more pronounced. A nonlinear twisted relationship was obtained for Rel_{8 h} at the intermediate and high levels of the polymers, which indicated an interaction between them at the corresponding factor levels. Kinetic treatment to the dissolution profiles revealed that the drug release ranged from Fickian to anomalous transport, which was mainly dependent on both the independent variables. The desirability function was used to optimize the response variables, and the observed responses were in agreement with the experimental values.     

Novel cyclodextrin-based film formulation intended for buccal delivery of atenolol

Background: Unknown influence of cyclodextrin on the properties of the film formulation aimed for buccal application. Aim: Development and characterization of a novel bioadhesive film formulation for buccal atenolol delivery containing drug/cyclodextrin inclusion. Method: Interaction between atenolol and randomly methylated β-cyclodextrin (RAMEB) in solution was studied by phase solubility studies. The complex in solid state was prepared by the freeze-drying method and characterized by differential scanning calorimetry and Fourier-transformed infrared spectroscopy (FTIR). The drug, free or in complex form, was incorporated into polymeric films prepared by the casting method using ethylcellulose (EC), polyvinyl alcohol (PVA), and hydroxypropyl methylcellulose (HPMC). The prepared film formulations were characterized in terms of swelling, bioadhesion, and in vitro drug release. Results: The formation of a stabile inclusion complex (K_s = 783.4?±?21.6 M^?1) in 1:1 molar stoichiometry was confirmed in solution and in solid state. The swelling properties of films were predominated by the type of polymer used in the formulation. In vitro bioadhesive properties of the films were well correlated with the swelling properties of the polymers used in the formulation. Although incorporation of the drug, free or in complex form, decreased the bioadhesion of the films, PVA- and HPMC-based formulations retained suitable bioadhesive properties. Higher atenolol solubility upon complexation with RAMEB increased the drug dissolution rate under conditions designed to be similar to those on the buccal mucosa, but it has decreased the drug release rate from the PVA and HPMC film formulation, leading to a sustained drug release pattern. In the case of EC-based films, RAMEB promoted drug release. Other parameters that influenced the drug release rate were associated with the structure of the polymer used in the formulation, swelling characteristics of the films, and the interaction between atenolol and hydrophilic polymers that was demonstrated by FTIR analysis. Conclusion: Incorporation of atenolol in the form of an inclusion complex into hydrophilic films may be an appropriate strategy to prepare a suitable formulation for buccal drug delivery.     

Buccal bioadhesive delivery system of 5-fluorouracil: optimization and characterization

The objective of this work was to apply the response surface approach in the development of buccal bioadhesive tablets of 5-fluorouracil (5-FU). Experiments were performed according to a 3(2) factorial design to evaluate the effects of two polymers, Gantrez MS-955 (X(1)) and hydroxypropylmethyl cellulose (HPMC) K15M (X(2)) on the bioadhesive force, percentage drug release in 8 h (Rel(8 h)), time taken for 50% drug release (t(50%)), and diffusion coefficient (n). The effect of the two independent variables on the response variables was studied by response surface plots and contour plots generated by the Design Expert software. The compatibility between 5-FU and the tablet excipients was confirmed by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) studies. Both the polymers were found to have synergistic effect on bioadhesion but the effect of Gantrez was more pronounced. A nonlinear twisted relationship was obtained for Rel(8 h) at the intermediate and high levels of the polymers, which indicated an interaction between them at the corresponding factor levels. Kinetic treatment to the dissolution profiles revealed that the drug release ranged from Fickian to anomalous transport, which was mainly dependent on both the independent variables. The desirability function was used to optimize the response variables, and the observed responses were in agreement with the experimental values.     

Buccoadhesive Tablets of Nifedipine: Standardization of A Novel Buccoadhesive-Erodible Carrier

Buccoadhesive tablets of nifedipine were obtained by incorporation of nifedipine in suitable carrier systems standardised based on bioadhesion and dissolution. The carrier systems were formulated using sodium alginate as the bioadhesive. Mannitol, lactose, polyethylene glycol 6000 and polyethylene glycol 4000 were incorporated as solubilisers, singly or in combination. Carrier systems having a diameter of 11 mm and weighing about 200 mg were obtained by standard tabletting techniques using polyvinylpyrolidone as the binder. The systems were evaluated for bioadhesion and dissolution, 'in vitro' and 'in vivo' in seven normal healthy human volunteers. Based on these studies, nifedipine (5 mg) was incorporated in selected carrier systems to obtain buccoadhesive tablets of nifedipine. These tablets exhibited rapid 'in vitro' drug release.     

Buccoadhesive Tablets of Nifedipine: Standardization of A Novel Buccoadhesive-Erodible Carrier

Abstract

Buccoadhesive tablets of nifedipine were obtained by incorporation of nifedipine in suitable carrier systems standardised based on bioadhesion and dissolution. The carrier systems were formulated using sodium alginate as the bioadhesive. Mannitol, lactose, polyethylene glycol 6000 and polyethylene glycol 4000 were incorporated as solubilisers, singly or in combination. Carrier systems having a diameter of 11 mm and weighing about 200 mg were obtained by standard tabletting techniques using polyvinylpyrolidone as the binder. The systems were evaluated for bioadhesion and dissolution, 'in vitro' and 'in vivo' in seven normal healthy human volunteers. Based on these studies, nifedipine (5 mg) was incorporated in selected carrier systems to obtain buccoadhesive tablets of nifedipine. These tablets exhibited rapid 'in vitro' drug release.