Relationship between the swelling process and the release of a water-soluble drug from a compressed swellable-soluble matrix of poly(vinyl alcohol)

An attempt was made in this study to relate the release of a highly water-soluble model drug from tablet matrices of poly(vinyl alcohol) (PVAL) with the factors that may affect the release behavior. Swelling was evaluated using a simple projection method. The swollen layer was photographed to monitor its thickness. The polymer and drug dissolution were determined simultaneously by spectrophotometric methods. The resulting change of tablet area showed that the process of swelling occurred in three different stages that were intimately related to polymer dissolution: (a) a rapid initial swelling, resulting in an increased area; (b) a period with an approximately constant area; and (c) a decrease of the tablet area. In spite of the significant dissolution of PVAL during the release process, the thickness of the gel layer gradually increased. Thus, the delivery was governed by the drug concentration gradient along the diffusional path length. The drug release appeared to be controlled by a diffusion process according to Higuchi-type kinetics. The data analysis of drug and polymer profiles confirmed the diffusional mechanism.     

Formulation,in vitro evaluation and study of variables on tri-layered gastro-retentive delivery system of diltiazem HCl

Context: Tri-layered floating tablets using only one grade of polyethylene oxide (PEO) would enable easy manufacturing, reproducibility and controlled release for highly soluble drugs.

Objective: To evaluate the potential of PEO as a sole polymer for the controlled release and to study the effect of formulation variables on release and gastric retention of highly soluble Diltiazem hydrochloride (DTZ).

Methods: Tablets were compressed with middle layer consisting of drug and polymer while outer layers consisted of polymer with sodium bicarbonate. Design of formulation to obtain 12?h, zero-order release and rapid floatation was done by varying the grades, quantity of PEO and sodium bicarbonate. Dissolution data were fitted in drug release models and swelling/erosion studies were undertaken to verify the drug release mechanism. Effect of formulation variables and tablet surface morphology using scanning electron microscopy were studied.

Results and discussion: The optimized formula passed the criteria of USP dissolution test I and exhibited floating lag-time of 3–4?min. Drug release was faster from low molecular weight (MW) PEO as compared to high MW. With an increase in the amount of sodium bicarbonate, faster buoyancy was achieved due to the increased CO₂ gas formation. Drug release followed zero-order and gave a good fit to the Korsmeyer–Peppas model, which suggested that drug release was due to diffusion through polymer swelling.

Conclusion: Zero-order, controlled release profile with the desired buoyancy can be achieved by using optimum formula quantities of sodium bicarbonate and polymer. The tri-layered system shows promising delivery of DTZ, and possibly other water-soluble drugs.     

Development of Polysaccharide-Based Colon Targeted Drug Delivery Systems for the Treatment of Amoebiasis

ABSTRACT

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30–40% drug release during the initial 4–5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18–24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

In vitro release of ketoprofen from hydrophilic matrix tablets containing cellulose polymer mixtures

The effect of cellulose ether polymer mixtures, containing both hydroxypropylcellulose (HPC) and hydroxypropylmethylcellulose (HPMC K15M or K100M), on ketoprofen (KTP) release from matrix tablets was investigated. In order to evaluate the compatibility between the matrix components, Raman spectroscopy, scanning electron microscopy (SEM), and X-ray powder diffraction (XRPD) experiments were performed. The results evidence the absence of significant intermolecular interactions that could eventually lead to an incompatibility between the drug and the different excipients. Formulations containing mixtures of polymers with both low and high viscosity grades were prepared by a direct compression method, by varying the polymer/polymer (w/w) ratio while keeping the drug amount incorporated in the solid dispersion constant (200?mg). The hardness values of different matrices were found within the range 113.8 to 154.9 N. HPLC analysis showed a drug content recovery between 99.3 and 102.1%, indicating that no KTP degradation occurred during the preparation process. All formulations attained a high hydration degree after the first hour, which is essential to allow the gel layer formation prior to tablet dissolution. Independent-model dissolution parameters such as t_10% and t_50% dissolution times, dissolution efficiency (DE), mean dissolution time (MDT), and area under curve (AUC) were calculated for all formulations. Zero-order, first-order, Higuchi, and Korsmeyer–Peppas kinetic models were employed to interpret the dissolution profiles: a predominantly Fickian diffusion release mechanism was obtained – with Korsmeyer–Peppas exponent values ranging from 0.216 to 0.555. The incorporation of HPC was thus found to play an essential role as a release modifier from HPMC containing tablets.     

Sustained-release from Layered Matrix System Comprising Chitosan and Xanthan Gum

ABSTRACT

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH₃⁺ of chitosan molecule and COO^? of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.     

Performance of Multilayered Particles: Influence of a Thin Cushioning Layer

ABSTRACT

Nowadays, oral dosage forms with controlled release kinetics have known an increasing interest. The polymer coating of drug-loaded particles is one of the most common methods used for controlling drug delivery. Such multilayered particles could be either filled into capsules or compressed into tablets for their oral administration. However, many studies have noticed that coating films are damaged during the compression process, leading to significant changes in drug release profiles. The aims of this study were to investigate the effects of a thin cushioning layer [made of HydroxyPropylMethyl Cellulose (HPMC)] applied on coated theophylline particles upon particle characteristics, tablet properties, and then upon their dissolution performance. If no significant effect was shown with particles, this thin HPMC layer played an important role in the tablets. Tablet cohesiveness was decreased due to HPMC cushioning properties and moreover, the theophylline release rate was increased, as HPMC is a water-soluble polymer creating channels in polymer film for dissolution medium. Therefore, a cushioning layer helped to protect polymer coats from fracture during compression but could also affect drug release and so, both effects must be checked in such a drug delivery system.     

Effect of core size and excipients on the lag time and drug release from a pulsatile drug delivery system

Background: Pulsatile drug delivery system, based on a core-in-cup dry-coated tablet was examined and evaluated. The system consisted of three different parts: a core tablet (with increasing diameter), containing the active ingredient acting as reservoir; an impermeable outer shell; and a top cover layer barrier. The core tablet contained either caffeine or theophylline as model drugs. Objective: To investigate and evaluate how the geometrical characteristics of the core tablets, drugs, and excipients influence the behavior of the system presented, namely, lag time and drug release. Results and Discussion: Drug release exhibited a lag time period dependent on the core tablet size, drug solubility, and characteristics of polymer and polymer mixtures. The lag time was increased by increasing the core tablet diameter and the quantity of soluble lactose in the top cover layer. Conclusions: The quantity and characteristics of materials, the core tablet size, and the erosion of the top cover layer were found to be important factors in controlling the lag time and release. Increase in core tablet diameter resulted in lower lag times and greater release and release rates. Similarly, by increasing sufficiently the quantity of the soluble excipient lactose, in the top layer we observed a decrease of the lag times and an increase of release.     

Development of Sustained-Release Tablets Containing Sodium Valproate: In Vitro and In Vivo Correlation

ABSTRACT

We have developed a 200 mg and 400 mg sustained-release sodium valproate tablet that allows effective blood concentration of the active drug with once-a-day dosing. The controlled dissolution or sustained release of the drug was attained by a membrane-controlled system. A single-coating system did not adequately control the dissolution rate, and therefore double-coated tablets were prepared and a human pharmacokinetic study was conducted. With the 200 mg VPA-Na tablets, the nonfasting C_max was only 20% higher than the fasting C_max. An in vitro dissolution test was conducted to predict the effects of food on drug dissolution after administration of this tablet. A relatively good correlation was observed between the absorption profiles and the dissolution profiles of the drug.     

Performance of multilayered particles: influence of a thin cushioning layer

Nowadays, oral dosage forms with controlled release kinetics have known an increasing interest. The polymer coating of drug-loaded particles is one of the most common methods used for controlling drug delivery. Such multilayered particles could be either filled into capsules or compressed into tablets for their oral administration. However, many studies have noticed that coating films are damaged during the compression process, leading to significant changes in drug release profiles. The aims of this study were to investigate the effects of a thin cushioning layer [made of HydroxyPropylMethyl Cellulose (HPMC)] applied on coated theophylline particles upon particle characteristics, tablet properties, and then upon their dissolution performance. If no significant effect was shown with particles, this thin HPMC layer played an important role in the tablets. Tablet cohesiveness was decreased due to HPMC cushioning properties and moreover, the theophylline release rate was increased, as HPMC is a water-soluble polymer creating channels in polymer film for dissolution medium. Therefore, a cushioning layer helped to protect polymer coats from fracture during compression but could also affect drug release and so, both effects must be checked in such a drug delivery system.     

Sustained-release from layered matrix system comprising chitosan and xanthan gum

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH₃⁺ of chitosan molecule and COO^- of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.     

Influence of Formulation and Other Factors on the Release of Chlorpheniramine Mateate from Polymer Coated Beads

Abstract

Controlled release beads containing chlorpheniramine maleate, coated with Eudragit RL and RS, were prepared using the Wurster process. The effect of membrane thickness, polymer ratio of the coating material, agitation speed and pH of the dissolution medium on drug release were investigated using the USP dissolution basket method. The in vitro release of drug was described adequately by a previously published equation. The release rate constant (K) was dependent on the membrane thickness, the polymer ratio and pH of the dissolution medium. On the other hand, agitation speed used in this study did not have any influence on the release of the drug.     

Basic Coating Polymers for the Colon-Specific Drug Delivery in Inflammatory Bowel Disease

During acute attacks of inflammatory bowel disease, the luminal pH of the colon decreases significantly. This drop in pH can be exploited by developing coated dosage forms with acid-soluble coating polymers to achieve topical drug delivery to the colon. Two batches of minitablets, a conventional and a swellable formulation, were prepared by direct compression and coated with different amounts of either Eudragit® E or AEA® in a small coating pan. The release of the model drug dexamethasone from the coated tablets was measured spectrophotometrically at pH 2.0, 4.0, 5.0, and 6.8 and different stirring rates (100–200 rpm) to simulate the influence of pH and hydrodynamic stress on drug release. In general, lag times of drug release, determined as the time points of a 5% drug release, were longer with AEA-coated cores compared to those coated with Eudragit E, resulting from a lower polymer dissolution rate and water permeability of this film. In low pH media, drug release was dependent on the stirring rate because the onset of drug release is determined by the time required for dissolution of the basic polymer films. At pH 6.8, lag times from nonswelling tablets coated with Eudragit E, for which drug release only begins after complete erosion of the polymer film, are not significantly affected by hydrodynamic stress. Drug release from AEA-coated cores is determined by the slow drug diffusion through the polymer film. Lag times from tablets with swelling properties, for which drug release is induced by disruption of the basic polymer films due to water penetration and subsequent core swelling, are not significantly affected by hydrodynamic stress. Additional coating layers such as an intermediate hydroxypropylcellulose (HPC) layer and an enteric outer layer do not influence the lag times of drug release, nor does a 2-hr pretreatment of the entire dosage form in acidic media.     

Basic coating polymers for the colon-specific drug delivery in inflammatory bowel disease

During acute attacks of inflammatory bowel disease, the luminal pH of the colon decreases significantly. This drop in pH can be exploited by developing coated dosage forms with acid-soluble coating polymers to achieve topical drug delivery to the colon. Two batches of minitablets, a conventional and a swellable formulation, were prepared by direct compression and coated with different amounts of either Eudragit® E or AEA® in a small coating pan. The release of the model drug dexamethasone from the coated tablets was measured spectrophotometrically at pH 2.0, 4.0, 5.0, and 6.8 and different stirring rates (100-200 rpm) to simulate the influence of pH and hydrodynamic stress on drug release. In general, lag times of drug release, determined as the time points of a 5% drug release, were longer with AEA-coated cores compared to those coated with Eudragit E, resulting from a lower polymer dissolution rate and water permeability of this film. In low pH media, drug release was dependent on the stirring rate because the onset of drug release is determined by the time required for dissolution of the basic polymer films. At pH 6.8, lag times from nonswelling tablets coated with Eudragit E, for which drug release only begins after complete erosion of the polymer film, are not significantly affected by hydrodynamic stress. Drug release from AEA-coated cores is determined by the slow drug diffusion through the polymer film. Lag times from tablets with swelling properties, for which drug release is induced by disruption of the basic polymer films due to water penetration and subsequent core swelling, are not significantly affected by hydrodynamic stress. Additional coating layers such as an intermediate hydroxypropylcellulose (HPC) layer and an enteric outer layer do not influence the lag times of drug release, nor does a 2-hr pretreatment of the entire dosage form in acidic media.     

Controlled Release Theophylline Tablet with Acrylic Polymers Prepared by Spray-Drying Technique in Aqueous System

Abstract

Sustained release and enteric theophylline tablets were prepared by directly compressing spray-dried microsphers with Eudragits L30D, L100-55 and E30D. The spray-drying process was free from using organic solvent. Drug dissolution of the enteric tablet in an acidic solution (pH 1.2) was highly dependent on the polymer content of the microsphere. Completely enteric function was observed with drug-to-polymer ratio of 1:3 using Eudragit L30D or L100-55. Tablet with Eudragit E30D formulated at the 2–40% level showed good sustained drug release which was throughly independent of the pH of dissolution media. The dissolution pattern was similar to that of Theo-dur and gave a straight line in Higuchi plot. In each tablet, the controlled drug release was attributed to continuous and well-dispersed polymer matrix formed by spray-drying and subsequent compressing process     

Evaluation of Monolithic Osmotic Tablet System for Nifedipine Delivery In Vitro and In Vivo

Abstract

The aim of this study was to evaluate the monolithic osmotic tablet system (MOTS) containing a solid dispersion with the practically water-insoluble drug nifedipine in vitro and in vivo. In the drug release study in vitro, the release profiles of this system had almost zero-order kinetics. The influences of tablet formulation variables, sizes of the delivery orifice, membrane variables, and values of pH in the dissolution medium on nifedipine release from MOTS have been investigated. The results provided evidence that the tablet core played an important role in MOTS. While orifice sizes and membrane variables affected the nifedipine release rate, MOTS was independent of the dissolution medium. The appropriate orifice size was found to be in the range of 0.5–1.0 mm. The coating membrane incorporating hydrophilic polyethylene glycol (PEG) formed a porous structure. The human pharmacokinetics and relative bioavailability of MOTS containing nifedipine were compared with a commercial Adalat® osmotic tablet system containing an equivalent dose of nifedipine following an oral single dose of 30 mg given to each of 11 healthy volunteers in an open, randomized crossover study in vivo. The relative bioavailability for MOTS was 112%. There was no statistically significant difference in the pharmacokinetic parameters between two dosage forms. It is concluded that the monolithic osmotic tablet controlled release system is feasible for a long-acting preparation as a once-daily treatment.     

Formulation of Controlled Release Matrices by Granulation with a Polymer Dispersion

The objective of this work was to incorporate an ethylcellulose-based controlled-release coating suspension (Surelease, Colorcon) within a tablet matrix to provide a release controlling mechanism. Anhydrous theophylline, chlorpheniramine maleate, and acetaminophen were selected as model drug entities. Surelease dispersion was incorporated as the granulating agent either to the drug entity alone or to a blended mixture of drug and filler. Control batches included simple aqueous granulations and direct compression mixtures. Tablets were prepared on a single stroke tablet press. Dissolution was performed by the USP Method I (rotating basket) in purified water for the granulations and the resulting tablets. The uncompressed granulations did not exhibit prolonged release. In general, tablets prepared with the polymer suspension as the granulating agent were non-disintegrating, and exhibited slower dissolution than the control tablets. Release profiles were affected by drug concentration and excipient levels. By the dissolution method selected, complete drug release for the various formulations ranged from less than 1 hour to greater than 12 hours. The use of the polymer dispersion appears to enhance the processing characteristics of some materials, and to provide the formulator with control over drug release.     

Oral sustained release dosage forms comparison between matrices and reservoir devices

Abstract

For the formulation of a monolithic controlled release form for oral use, containing 80 mg of a highly soluble drug, different systems have been compared.

At first, matrices where prepared containing 37.3 percent of a water soluble polymer: HPMC (Methocel or Metolose) and HEC (Natrosol). With such swelling agents, it is quite difficult to reach a zero order release. But industrial scale-up is easy, because the process uses only classical machines. Variations intra and between batches have been found very small and stability is good.

An other possibility is a lipophilic matrix. Hard gelatin capsules were filled with a drug dispersion in Gélucire of different grades. The fabrication process is quite easy but at this time, few informations about stability are available.

A third convenient way is a reservoir device, a tablet coated with an insoluble polymer film (Aquacoat ECD 30). A zero order release was obtained until 80 percent of drug released after 12 hours. But the coating is a very critical phase of the process: disturbances affect the drug dissolution rate. The film may also be altered by the patient, who can break or crunch the tablet. In this case, all the drug is dissolved quasi instantaneously.

For all these reasons, the hydrophilic matrix was preferred, especially if a zero order is obtained.     

The Effects of Heat and Desiccation Treatment on the Controlled Release Properties of Aqueous Silicone Latex Coated Tablets

Abstract

An aqueous based polymeric coating system, polydimethyl-siloxane elastomer latex, was employed to coat acetaminophen tablets. Drug release characteristics due to this polymer coating were monitored by in-vitro dissolution tests. It was found that heat treatment of the coating and the desiccation pretreatment significantly changed the drug release profiles compared to untreated, coated tablets. The slowest drug release rate was obtained by desiccating the coated tablets for 24 hours or more followed by heat treatment at 40°C for at least 4.5 hours. Rupturing of the coating layer during dissolution testing was observed only if the curing process was not utilized. As expected, drug released at a given time was inversely proportional to the coating thickness.     

Investigation of Cyclobenzaprine Hydrochloride Release from Oral Osmotic Delivery Systems Containing a Water-Swellable Polymer

ABSTRACT

Oral osmotic delivery systems containing polyethylene oxide (PEO, a water-swellable polymer) were designed and the release of cyclobenzaprine hydrochloride (model drug) from the devices was investigated. The systems consisted of model drug, mannitol (osmotic agent), and increasing amounts of PEO surrounded by a semipermeable membrane drilled with a delivery orifice. There was a decrease in drug release rate with PEO in the core. This may be due to solubility-modulating properties of the polymer. Visual inspection of the devices with PEO showed significant swelling during dissolution testing. Swelling (internal pressure) may influence water imbibition rate into the core and subsequently drug release rate. The release rates were a function of membrane thickness. The release rates were independent of orifice size (range of 150–510 μm diameter) and hydrodynamic conditions for the devices. This would be advantageous in the delivery of drugs in man.     

Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30-40% drug release during the initial 4-5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18-24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.