Multiobjective cuckoo search for design optimization

Many design problems in engineering are typically multiobjective, under complex nonlinear constraints. The algorithms needed to solve multiobjective problems can be significantly different from the methods for single objective optimization. Computing effort and the number of function evaluations may often increase significantly for multiobjective problems. Metaheuristic algorithms start to show their advantages in dealing with multiobjective optimization. In this paper, we formulate a new cuckoo search for multiobjective optimization. We validate it against a set of multiobjective test functions, and then apply it to solve structural design problems such as beam design and disc brake design. In addition, we also analyze the main characteristics of the algorithm and their implications.     

Multiobjective fuzzy mathematical model for a financially constrained closed-loop supply chain with labor employment

This paper addresses the multiobjective, multiproducts and multiperiod closed-loop supply chain network design with uncertain parameters, whose aim is to incorporate the financial flow as the cash flow and debts' constraints and labor employment under fuzzy uncertainty. The objectives of the proposed mathematical model are to maximize the increase in cash flow, maximize the total created jobs in the supply chain, and maximize the reliability of consumed raw materials. To encounter the fuzzy uncertainty in this model, a possibilistic programming approach is used. To solve large-sized problems, the multiobjective simulated annealing algorithm, multiobjective gray wolf optimization, and multiobjective invasive weed optimization are proposed and developed. The numerical results demonstrate that these algorithms solve the problems within about 1% of the required solving time for the augmented ε-constraint and have similar performance and even better in some cases. The multiobjective simulated annealing algorithm with a weak performance takes less time than the other two algorithms. The multiobjective gray wolf optimization and multiobjective invasive weed optimization algorithms are superior based on the multiobjective performance indices.     

Evolutionary Multiobjective Design in Automotive Development

This paper describes the use of evolutionary algorithms to solve multiobjective optimization problems arising at different stages in the automotive design process. The problems considered are black box optimization scenarios: definitions of the decision space and the design objectives are given, together with a procedure to evaluate any decision alternative with regard to the design objectives, e.g., a simulation model. However, no further information about the objective function is available. In order to provide a practical introduction to the use of multiobjective evolutionary algorithms, this article explores the three following case studies: design space exploration of road trains, parameter optimization of adaptive cruise controllers, and multiobjective system identification. In addition, selected research topics in evolutionary multiobjective optimization will be illustrated along with each case study, highlighting the practical relevance of the theoretical results through real-world application examples. The algorithms used in these studies were implemented based on the PISA (Platform and Programming Language Independent Interface for Search Algorithm) framework. Besides helping to structure the presentation of different algorithms in a coherent way, PISA also reduces the implementation effort considerably.     

基于人工免疫算法的多目标函数优化

提出了一种新型的人工免疫算法用来解决多目标函数优化问题。基于自然免疫系统固有的优良特性对算法进行了设计和分析。最后,算法对3个较复杂的多目标问题进行了优化,优化结果能很好地覆盖问题的Paret。最优面,并且把算法与某些混合遗传算法进行了对比实验,表明人工免疫算法在解决多目标优化问题上具有可观的研究前景。     

Multiobjective optimization using population-based extremal optimization

In recent years, a general-purpose local-search heuristic method called Extremal Optimization (EO) has been successfully applied in some NP-hard combinatorial optimization problems. In this paper, we present a novel Pareto-based algorithm, which can be regarded as an extension of EO, to solve multiobjective optimization problems. The proposed method, called Multiobjective Population-based Extremal Optimization (MOPEO), is validated by using five benchmark functions and metrics taken from the standard literature on multiobjective evolutionary optimization. The experimental results demonstrate that MOPEO is competitive with the state-of-the-art multiobjective evolutionary algorithms. Thus MOPEO can be considered as a viable alternative to solve multiobjective optimization problems.     

MRCD: a genetic algorithm for multiobjective robust control design

A genetic algorithm (GA) for the class of multiobjective optimization problems that appears in the design of robust controllers is presented in this paper. The design of a robust controller is a trade-off problem among competitive objectives such as disturbance rejection, reference tracking, stability against unmodeled dynamics, moderate control effort and so on. However, general methodologies for solving this class of design problems are not easily encountered in the literature because of the complexity of the resultant multiobjective problems. In this paper, a recently developed class of GAs, multiobjective GAs, are used to solve robust control design problems. Here, a new algorithm, called multiobjective robust control design, has been proposed. The structure and operators of this algorithm have been specifically developed for control design problems. The performace of the algorithm is evaluated by solving several test cases and is also compared to the standard algorithms used for the multiobjective design of robust controllers.     

Tuning of PID controller based on a multiobjective genetic algorithm applied to a robotic manipulator

Most controllers optimization and design problems are multiobjective in nature, since they normally have several (possibly conflicting) objectives that must be satisfied at the same time. Instead of aiming at finding a single solution, the multiobjective optimization methods try to produce a set of good trade-off solutions from which the decision maker may select one. Several methods have been devised for solving multiobjective optimization problems in control systems field. Traditionally, classical optimization algorithms based on nonlinear programming or optimal control theories are applied to obtain the solution of such problems. The presence of multiple objectives in a problem usually gives rise to a set of optimal solutions, largely known as Pareto-optimal solutions. Recently, Multiobjective Evolutionary Algorithms (MOEAs) have been applied to control systems problems. Compared with mathematical programming, MOEAs are very suitable to solve multiobjective optimization problems, because they deal simultaneously with a set of solutions and find a number of Pareto optimal solutions in a single run of algorithm. Starting from a set of initial solutions, MOEAs use iteratively improving optimization techniques to find the optimal solutions. In every iterative progress, MOEAs favor population-based Pareto dominance as a measure of fitness. In the MOEAs context, the Non-dominated Sorting Genetic Algorithm (NSGA-II) has been successfully applied to solving many multiobjective problems. This paper presents the design and the tuning of two PID (Proportional–Integral–Derivative) controllers through the NSGA-II approach. Simulation numerical results of multivariable PID control and convergence of the NSGA-II is presented and discussed with application in a robotic manipulator of two-degree-of-freedom. The proposed optimization method based on NSGA-II offers an effective way to implement simple but robust solutions providing a good reference tracking performance in closed loop.     

基于进化算法的多目标优化方法

进化算法在解决多目标优化问题中有其特有的优势.首先对多目标优化问题进行了描述;然后结合研究现状讨论了目前几种主要的基于进化算法的多目标优化方法,以及它们的优缺点;最后给出了多目标进化优化算法的一些应用,以及进化多目标优化算法的未来发展方向.     

基于目标空间划分的自适应多目标进化算法

目前,多目标进化算法在众多领域具有极高的应用价值,是优化领域的研究热点之一.分析已有多目标进化算法在保持种群多样性方面的不足并提出一种基于解空间划分的自适应多目标进化算法（space division basedadaptive multiobjective evolutionary algorithm,简称SDA-MOEA）来解决多目标优化问题.该方法首先将多目标优化问题的解空间划分为大量子空间,在算法进化过程中,每个子空间都保留一个非支配解集,以保证种群的多样性.另外,该方法根据每个子空间推进种群前进的距离,自适应地为每个子空间分配进化机会,以提高种群的进化速度.最后,利用3组共14个多目标优化问题检验SDA-MOEA的性能,并将SDA-MOEA与其他5个已有多目标进化算法进行对比分析.实验结果表明：在10个问题上,算法SDA-MOEA显著优于其他对比算法.     

AbYSS: Adapting Scatter Search to Multiobjective Optimization

We propose the use of a new algorithm to solve multiobjective optimization problems. Our proposal adapts the well-known scatter search template for single-objective optimization to the multiobjective domain. The result is a hybrid metaheuristic algorithm called Archive-Based hYbrid Scatter Search (AbYSS), which follows the scatter search structure but uses mutation and crossover operators from evolutionary algorithms. AbYSS incorporates typical concepts from the multiobjective field, such as Pareto dominance, density estimation, and an external archive to store the nondominated solutions. We evaluate AbYSS with a standard benchmark including both unconstrained and constrained problems, and it is compared with two state-of-the-art multiobjective optimizers, NSGA-II and SPEA2. The results obtained indicate that, according to the benchmark and parameter settings used, AbYSS outperforms the other two algorithms as regards the diversity of the solutions, and it obtains very competitive results according to the convergence to the true Pareto fronts and the hypervolume metric.      

Normative design of organizations. II. Organizational structure

For pt.I. see ibid., p. 346-59. This paper presents a multiobjective structural optimization process of designing an organization to execute a specific mission. We provide mathematical formulations for optimization problems arising in Phases II and III of our organizational design process and polynomial algorithms to solve the corresponding problems. Our organizational design methodology applies specific optimization techniques at different phases of the design, efficiently matching the structure of a mission (in particular, the one defined by the courses of action obtained from mission planning) to that of an organization. It allows an analyst to obtain an acceptable tradeoff among multiple mission and design objectives, as well as between computational complexity and solution efficiency (desired degree of suboptimality).     

Multiobjective backtracking search algorithm: application to FSI

Fluid-structure interaction (FSI) problems play an important role in many technical applications, for instance, wind turbines, aircraft, injection systems, or pumps. Thus, the optimization of such kind of problems is of high practical importance. Optimization algorithms aim to find the best values for a system’s parameters under various conditions. In this paper, we present a new Backtracking Search Optimization Algorithm for multiobjective optimization, named BSAMO, a new evolutionary algorithm (EA) for solving real-valued numerical optimization problems. EAs are popular stochastic search algorithms that are widely used to solve nonlinear, nondifferentiable and complex numerical optimization problems. In order to test the performance of this algorithm, a well known benchmark multiobjective problem has been chosen from the literature, and for FSI optimization, using a partitioned coupling procedure. The method has been tested through a 2D plate and a 3D wing subjected to aerodynamic loads. The obtained Pareto solutions are then presented and compared to those of the Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The numerical results demonstrate the efficiency of BSAMO and also its best performance in tackling real-world multiphysics problems.

     

Multiobjective evolutionary algorithms for electric power dispatch problem

The potential and effectiveness of the newly developed Pareto-based multiobjective evolutionary algorithms (MOEA) for solving a real-world power system multiobjective nonlinear optimization problem are comprehensively discussed and evaluated in this paper. Specifically, nondominated sorting genetic algorithm, niched Pareto genetic algorithm, and strength Pareto evolutionary algorithm (SPEA) have been developed and successfully applied to an environmental/economic electric power dispatch problem. A new procedure for quality measure is proposed in this paper in order to evaluate different techniques. A feasibility check procedure has been developed and superimposed on MOEA to restrict the search to the feasible region of the problem space. A hierarchical clustering algorithm is also imposed to provide the power system operator with a representative and manageable Pareto-optimal set. Moreover, an approach based on fuzzy set theory is developed to extract one of the Pareto-optimal solutions as the best compromise one. These multiobjective evolutionary algorithms have been individually examined and applied to the standard IEEE 30-bus six-generator test system. Several optimization runs have been carried out on different cases of problem complexity. The results of MOEA have been compared to those reported in the literature. The results confirm the potential and effectiveness of MOEA compared to the traditional multiobjective optimization techniques. In addition, the results demonstrate the superiority of the SPEA as a promising multiobjective evolutionary algorithm to solve different power system multiobjective optimization problems.     

An advanced multiobjective genetic algorithm design for the time and space assembly line balancing problem

Time and space assembly line balancing considers realistic multiobjective versions of the classical assembly line balancing industrial problems involving the joint optimization of conflicting criteria such as the cycle time, the number of stations, and/or the area of these stations. In addition to their multi-criteria nature, the different problems included in this field inherit the precedence constraints and the cycle time limitations from assembly line balancing problems, which altogether make them very hard to solve. Therefore, time and space assembly line balancing problems have been mainly tackled using multiobjective constructive metaheuristics. Global search algorithms in general - and multiobjective genetic algorithms in particular - have shown to be ineffective to solve them up to now because the existing approaches lack of a proper design taking into account the specific characteristics of this family of problems. The aim of this contribution is to demonstrate the latter assumption by proposing an advanced multiobjective genetic algorithm design for the 1/3 variant of the time and space assembly line balancing problem which involves the joint minimization of the number and the area of the stations given a fixed cycle time limit. This novel design takes the well known NSGA-II algorithm as a base and considers the use of a new coding scheme and sophisticated problem specific operators to properly deal with the said problematic questions. A detailed experimental study considering 10 different problem instances (including a real-world instance from the Nissan plant in Barcelona, Spain) will show the good yield of the new proposal in comparison with the state-of-the-art methods.     

多目标优化机制下DNA编码序列模型

针对现有DNA计算中存在的编码序列设计稳定性、可靠性不完善等问题,充分考虑基本编码问题,设计出一种基于多目标优化机制的DNA编码序列设计算法。在一定的约束条件下,该算法利用了多目标优化机制以及采取小种蚁群算法,将h-distance因子添加到单链DNA架构中,建立一种DNA序列公用方法。通过模拟实验表明,该算法与同类型算法相比,在计算效率、优化性方面具有一定优势。     

Multiobjective optimization–based fault‐tolerant flight control system design

The loss of measurements used for controller scheduling or envelope protection in modern flight control systems due to sensor failures leads to a challenging fault‐tolerant control law design problem. In this article, an approach to design such a robust fault‐tolerant control system, including full envelope protections using multiobjective optimization techniques, is proposed. The generic controller design and controller verification problems are derived and solved using novel multiobjective hybrid genetic optimization algorithms. These algorithms combine the multiobjective genetic search strategy with local, single‐objective optimization to improve convergence speed. The proposed strategies are applied to the design of a fault‐tolerant flight control system for a modern civil aircraft. The results of an industrial controller verification and validation campaign using an industrial benchmark simulator are reported.     

The balance between proximity and diversity in multiobjective evolutionary algorithms

Over the last decade, a variety of evolutionary algorithms (EAs) have been proposed for solving multiobjective optimization problems. Especially more recent multiobjective evolutionary algorithms (MOEAs) have been shown to be efficient and superior to earlier approaches. An important question however is whether we can expect such improvements to converge onto a specific efficient MOEA that behaves best on a large variety of problems. In this paper, we argue that the development of new MOEAs cannot converge onto a single new most efficient MOEA because the performance of MOEAs shows characteristics of multiobjective problems. While we point out the most important aspects for designing competent MOEAs in this paper, we also indicate the inherent multiobjective tradeoff in multiobjective optimization between proximity and diversity preservation. We discuss the impact of this tradeoff on the concepts and design of exploration and exploitation operators. We also present a general framework for competent MOEAs and show how current state-of-the-art MOEAs can be obtained by making choices within this framework. Furthermore, we show an example of how we can separate nondomination selection pressure from diversity preservation selection pressure and discuss the impact of changing the ratio between these components.     

Dynamic multiobjective optimization problems: test cases, approximations, and applications

After demonstrating adequately the usefulness of evolutionary multiobjective optimization (EMO) algorithms in finding multiple Pareto-optimal solutions for static multiobjective optimization problems, there is now a growing need for solving dynamic multiobjective optimization problems in a similar manner. In this paper, we focus on addressing this issue by developing a number of test problems and by suggesting a baseline algorithm. Since in a dynamic multiobjective optimization problem, the resulting Pareto-optimal set is expected to change with time (or, iteration of the optimization process), a suite of five test problems offering different patterns of such changes and different difficulties in tracking the dynamic Pareto-optimal front by a multiobjective optimization algorithm is presented. Moreover, a simple example of a dynamic multiobjective optimization problem arising from a dynamic control loop is presented. An extension to a previously proposed direction-based search method is proposed for solving such problems and tested on the proposed test problems. The test problems introduced in this paper should encourage researchers interested in multiobjective optimization and dynamic optimization problems to develop more efficient algorithms in the near future.     

Multiobjective controller design handling human preferences

Trends in controller design point to the integration of several objectives to achieve new performances. Moreover, it is easy to set the controller design problem as an optimization problem. Therefore, future improvements are likely to be based on the adequate formulation and resolution of the multiobjective optimization problem. The multiobjective optimization strategy called physical programming provides controller designers with a flexible tool to express design preferences with a ‘physical’ meaning. For each objective (settling time, overshoot, disturbance rejection, etc.) preferences are established through categories such as desirable, tolerable, unacceptable, etc. to which numerical values are assigned. The problem is normalized and converted to a single-objective optimization problem but normally it results in a multimodal problem very difficult to solve. Genetic algorithms provide an adequate solution to this type of problems and open new possibilities in controller design and tuning.     

A hybrid evolutionary multiobjective optimization strategy for the dynamic power supply problem in magnesia grain manufacturing

The supply trajectory of electric power for submerged arc magnesia furnace determines the yields and grade of magnesia grain during the manufacture process. As the two production targets (i.e., the yields and the grade of magnesia grain) are conflicting and the process is subject to changing conditions, the supply of electric power needs to be dynamically optimized to track the moving Pareto optimal set with time. A hybrid evolutionary multiobjective optimization strategy is proposed to address the dynamic multiobjective optimization problem. The hybrid strategy is based on two techniques. The first one uses case-based reasoning to immediately generate good solutions to adjust the power supply once the environment changes, and then apply a multiobjective evolutionary algorithm to accurately solve the problem. The second one is to learn the case solutions to guide and promote the search of the evolutionary algorithm, and the best solutions found by the evolutionary algorithm can be used to update the case library to improve the accuracy of case-based reasoning in the following process. Due to the effectiveness of mutual promotion, the hybrid strategy can continuously adapt and search in dynamic environments. Two prominent multiobjective evolutionary algorithms are integrated into the hybrid strategy to solve the dynamic multiobjective power supply optimization problem. The results from a series of experiments show that the proposed hybrid algorithms perform better than their component multiobjective evolutionary algorithms for the tested problems.