Analysis of common cold virus (human rhinovirus serotype 2) by capillary zone electrophoresis: the problem of peak identification.

Different preparations of human rhinovirus serotype 2 (HRV2), a common cold virus, were analyzed by capillary zone electrophoresis (CZE) in untreated fused-silica capillaries using borate buffer (100 mmol/L, pH 8.3) and sodium dodecyl sulfate (10 mmol/L) as additive to prevent wall adsorption. The electropherograms showed one major peak at 205- and 254-nm detection wavelengths. The identity of the peak as originating from native virus was confirmed by several indirect methods. Heating to 56 degrees C is known to lead to release of the genomic RNA from the viral capsid; this treatment resulted in the disappearance of the major peak and the emergence of a new predominant peak that was identified as RNA by enzymatic digestion. As expected, RNase treatment of the unheated sample remained without effect as the viral genome is inaccessible in the native viral shell. A monoclonal, virus-aggregating antibody was used for immunodepletion of native virus; again, the major peak disappeared upon removal of viral aggregates by centrifugation prior to CZE analysis. In combination, these results allowed for the unambiguous identification of the main peak as native HRV2 and of the minor peaks as contaminants present in various amounts in the different viral preparations. It is demonstrated that CZE allows for an extremely easy and rapid assessment of conformational state and purity of virions in a given viral preparation.     

Fluorescence detection in capillary zone electrophoresis using a charge-coupled device with time-delayed integration

A fluorescence detection system for capillary zone electrophoresis is described in which a charged-coupled device (CCD) views a 2-cm section of an axially illuminated capillary column. The CCD is operated in two readout modes: a snapshot mode that acquires a series of images in wavelength and capillary position, and a time-delayed integration mode that allows long exposure times of the moving analyte zones. By use of the latter mode, the ability to differentiate a species based on both its fluorescence emission and migration rate is demonstrated for fluorescein and sulforhodamine 101. The detection limit for fluorescein isothiocyanate (FITC) is 1.2 X 10(-20) mol; detection limits for FITC-amino acids are in the (2-8) X 10(-20) mol range.     

Phosphopeptide isomer separation using capillary zone electrophoresis for the study of protein kinases and phosphatases.

Methods for the rapid separation of phosphopeptide isomers (peptides with the same sequence but with phosphates on different residues) were developed using capillary zone electrophoresis with ultraviolet (CZE-UV) detection. Uncoated, cationic and neutral capillaries were used with both acidic and basic peptides. These methods enabled the assay of several protein kinases (mitogen activated protein kinase, protein kinase A, GST-tyrosine kinase) and phosphatases (acid, alkaline, and protein tyrosine phosphatase) and the determination of the sites of phosphorylation and dephosphorylation. Incubations of nonphosphorylated or phosphorylated peptide with kinases or phosphatases took place directly in the instrument's autosampler and were monitored over several hours using CZE-UV.     

Quantitative injection from a microloop. Reproducible volumetric sample introduction in capillary zone electrophoresis

A wire loop deployed at the tip of a capillary electrophoresis system has been investigated as a means of quantitative injection. A thin film of a liquid is formed on the loop, the loop is transferred to a sealed chamber, and then pneumatic pressure is applied to introduce the contents of the loop into the capillary. As long as the applied pressure is below a certain threshold, no air is introduced into the capillary, even after the loop contents have been fully introduced. Sample surface tension and viscosity do not have a significant effect on the injected volume. The small loop injection technique appears to be a robust and reproducible alternative to presently practiced approaches to sample injection in CE.     

Kinetic modelling of the optically stimulated conversion of peaks 5a and 5 to peak 4 in LiF:Mg,Ti (TLD-100)

The TC/LC conversion model for peaks 4, 5a and 5 in LiF:Mg,Ti (TLD-100) has been studied by solution of the coupled differential equations describing the charge carrier traffic following optical stimulation. Aspects of the model investigated were (i) the two-component exponential decay of the composite peak 5 TL intensity following the bleach, (ii) the role of retrapping during bleaching, (iii) the hole nature of peak 4 and (iv) the conversion of peak 5a traps to peak 4 traps. The high conversion efficiency is naturally explained due to the absence of conduction band competitive mechanisms in the optical ionisation of the electron in the e-h occupied structure corresponding to peak 5a and thereby leading to the hole-only occupied TC/LC leading to peak 4.     

Medium effect (transfer activity coefficient) of methanol and acetonitrile on beta-cyclodextrin/benzoate complexation in capillary zone electrophoresis

Association constants, Kc, were derived from the electrophoretic mobilities of the anionic solutes (seven benzoates with hydroxy or chloro substituents) by capillary zone electrophoresis in different solvent systems, consisting of binary mixtures of water with up to 20% (v/v) methanol or acetonitrile, respectively. The association constants expectedly are found to decrease with increasing organic solvent concentration. The effect of organic solvents on the Kc of the benzoates with beta-cyclodextrin was analyzed applying the concept of the transfer activity coefficient (or the medium effect). This concept enables the evaluation of the significance of the contributions of the individual species involved in the complexation equilibrium in the different solvents: the benzoate ion, beta-cyclodextrin, and the anionic benzoate-beta-cyclodextrin complex. The medium effect on benzoate was calculated from the change in acidity constant of benzoic acid in the different mixed solvents and the corresponding transfer activity coefficients of the proton and the molecular acid. The transfer activity coefficients for beta-cyclodextrin results from its solubility at saturation in the different solvents. In this way, an estimation of the standard free energy of transfer, deltaG(t)0, of each species involved in the complexation equilibrium was possible for the transfer from water into the respective mixed solvent. It was found that the organic solvents do not significantly affect deltaG(t)0 for the benzoate anion. However, the organic solvents play a different role concerning the stabilization of beta-cyclodextrin and the complex anion: whereas the addition of acetonitrile has nearly no influence on deltaG(t)0 of the anionic complex, the reduction in Kc is caused by the enhanced stabilization of beta-cyclodextrin (reflected by its better solubility). Addition of methanol, on the other hand, lowers the solubility of beta-cyclodextrin, thus giving positive values for deltaG(t)0. Thus, the overall effect on Kc in methanolic solutions must be related to the pronounced destabilization of the benzoate-beta-cyclodextrin complex.     

Track structure approach to the calculation of peak 5a to peak 5 (TLD-100) relative intensities following heavy charged particle irradiation

A track structure approach to the calculation of the relative strength of localised and delocalised recombination mechanisms leading to composite glow peak 5 in LiF:Mg,Ti following heavy charged particle irradiation is described.     

Specific base recognition of oligodeoxynucleotides by capillary affinity gel electrophoresis using polyacrylamide-poly(9-vinyladenine) conjugated gel.

Poly(9-vinyladenine) was synthesized and utilized as an affinity macroligand entrapped within the gel matrix. Base-specific separation of oligodeoxynucleotides was achieved with high resolution and high speed by electrophoresis, using capillaries filled with conjugated polyacrylamide-poly(9-vinyladenine) gel. Oligothymidylic acids were selectively separated from the mixture of oligothymidylic and oligodeoxyadenylic acids by utilizing a specific hydrogen bonding between poly(9-vinyladenine) and oligothymidylic acids. Migration time and resolution of oligodeoxynucleotides were influenced by several parameters, such as the size of poly(9-vinyladenine), capillary temperature, and concentrations of poly(9-vinyladenine) and urea. Some guidelines are presented, based on the theoretical formulation of the effect of these parameters, in order to find optimum electrophoretic conditions. Analytical capillary affinity gel electrophoresis was developed for the selective and sensitive base recognition of oligodeoxynucleotides with efficiencies as high as several 10(6) plates/m by using a urea-gel capillary with poly(9-vinyladenine) and temperature-programming.     

Sensitive and universal indirect chemiluminescence detection for capillary electrophoresis of cations using cobalt(II) as a probe ion

Highly sensitive and universal indirect chemiluminescence detection for capillary electrophoresis of cations was described. This novel method is based on use of the ultrasensitive cobalt(II) as a probe ion in the running buffer. A strong and stable background chemiluminescent signal can be generated by the luminol-hydrogen peroxide reaction catalyzed by cobalt(II) ion. Displacement of the cobalt(II) probe ion in the running buffer by a migrating sample cation results in a quantifiable decrease in the background signal. The conditions for electrophoresis and the chemiluminescent reaction were systematically investigated using a commercial capillary electrophoresis instrument with an in-house-built chemiluminescence detector. Under the optimal conditions, the detection limits of the concentration for manganese(II), cadmium(II), nickel(II), lead(II), and 14 lanthanides were (3.0-6.0) x 10(-9) mol/L (S/N = 3), which was approximately 3 orders of magnitude better than indirect UV detection and 2 orders better than indirect laser-induced fluorescent detection. A mixture of 18 metal ions including 14 lanthanides was efficiently separated within 3.5 min using lactate to partially complex the metal ions. Our data demonstrated that CE with indirect CL detection was a powerful and universal tool for analysis of inorganic and organic cations.     

Development of a microfabricated palladium decoupler/electrochemical detector for microchip capillary electrophoresis using a hybrid glass/poly(dimethylsiloxane) device

The fabrication and evaluation of a palladium decoupler and working electrode for microchip capillary electrophoresis (CE) with electrochemical detection is described. The use of the Pd decoupler allows the working electrode to be placed directly in the separation channel and eliminates the band-broadening characteristic of the end-channel configuration. The method used for fabrication of the decoupler and working electrode was based on thin-layer deposition of titanium followed by palladium onto a glass substrate. When employed as the cathode in CE, palladium absorbs the hydrogen gas that is generated by the hydrolysis of water. The effect of the decoupler size on the ability to remove hydrogen was evaluated with regard to reproducibility and longevity. Using boric acid and TES buffer systems, 500 microm was determined to be the optimum decoupler size, with effective voltage isolation lasting for approximately 6 h at a constant field strength of 600 V/cm. The effect of distance between the decoupler and working electrode on noise and resolution for the separation of dopamine and epinephrine was also investigated. It was found that 250 microm was the optimum spacing between the decoupler and working electrode. At this spacing, laser-induced fluorescence detection at various points around the decoupler established that the band broadening due to pressure-induced flow that occurs after the decoupler did not significantly affect the separation efficiency of fluorescein. Limits of detection, sensitivity, and linearity for dopamine (500 nM, 3.5 pA/microM, r(2) = 0.9996) and epinephrine (2.1 microM, 2.6 pA/microM, r(2) = 0.9996) were obtained using the palladium decoupler in combination with a Pd working electrode.     

Characterization of prolidase activity using capillary electrophoresis with tris(2,2'-bipyridyl)ruthenium(II) electrochemiluminescence detection and application to evaluate collagen degradation in diabetes mellitus

A new method for prolidase (PLD, EC 3.4.13.9) activity assay was developed based on the determination of proline produced from enzymatic reaction through capillary electrophoresis (CE) with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)3(2+)] electrochemiluminescence detection (ECL). A detection limit of 12.2 fmol (S/N = 3) for proline, corresponding to 1.22 x 10(-8) units of prolidase catalyzing for 1 min was achieved. PLD activity determined by CE-ECL method was in agreement with that obtained from the classical Chinard's one. CE-ECL showed its powerful resolving ability and selectivity as no sample pretreatment was needed and no interference existed. The clinical utility of this method was successfully demonstrated by its application to assay PLD activity in the serum of diabetic patients in order to evaluate collagen degradation in diabetes mellitus (DM). The results indicated that enhanced collagen degradation occurred in DM.     

Validation of a capillary zone electrophoresis method for determination of rimantadine hydrochloride in Rimantadin100 tablets and the method application to dissolution test monitoring

A capillary zone electrophoretic method with indirect UV-detection for determination of rimantadine, an antiviral drug against influenza A, in tablets was validated. Instrumental precision, the method precision, accuracy, calibration curve linearity, selectivity, robustness, and time stability of the sample and the standard were tested. The method was also applied to monitor dissolution tests of the tablets. The possibility of addition of an internal standard for improvement of the method precision was discussed.     

Localised and delocalised optically induced conversion of composite glow peak 5 in LiF:Mg,Ti (TLD-100) to glow peak 4 as a function of postirradiation annealing temperature

The composite structure of glow peak 5 in LiF:Mg,Ti (TLD-100) has been investigated using optical bleaching by 310 nm (4 eV) light. The glow peak conversion efficiency of peak 5a (Tm = 187 degrees C) to peak 4 traps is very high at a value of 3+/-0.5 (1 SD) whereas the glow peak conversion efficiency of peak 5 (Tm = 205 degrees C) to peak 4 traps is 0.0026+/-0.0012 (1 SD). The high conversion efficiency of peak 5a to peak 4 arises from direct optical ionisation of the electron in the electron-hole pair. leaving behind a singly-trapped hole (peak 4), a direct mechanism, relatively free of competitive mechanisms. Optical ionisation of the 'singly-trapped' electron (peak 5), however, can lead to peak 4 only via multi-stage mechanisms involving charge carrier transport in the valence and conduction bands, a mechanism subject to competitive processes. The conduction/valence band competitive processes lead to the factor of one thousand decrease in the conversion efficiency of peak 5 compared to peak 5a.     

A study of the Stiles-Crawford (S-C) function at 35 degrees in the temporal field and the stability of the foveal S-C function peak over time.

Directional sensitivity of the retina (the Stiles-Crawford function of the first kind) was measured at a point 35 degrees from fixation and at the point of fixation. Three normal observers were used. The peripheral test point intercepted the retina between the optic nerve head and the ora serrata. At both test points, photopic and scotopic (one subject) Stiles-Crawford function peaks were contained within the pupillary bound and approximated the center of the pupil. Directionality at the two points was rather similar. These findings add strength to the argument that retinal receptors align approximately with the center of the exit pupil of the eye. Evidence for stability in Stiles-Crawford peak location in time is also presented.     

High-resolution computer simulations of stacking of weak bases using a transient pH boundary in capillary electrophoresis. 1. Concept and impact of sample ionic strength

The dynamics of focusing weak bases using a transient pH boundary was examined via high-resolution computer simulation software. Emphasis was placed on the mechanism and impact that the presence of salt, namely, NaCl, has on the ability to focus weak bases. A series of weak bases with mobilities ranging from 5 x 10(-9) to 30 x 10(-9) m2/V x s and pKa values between 3.0 and 7.5 were examined using a combination of 65.6 mM formic acid, pH 2.85, for the separation electrolyte, and 65.6 mM formic acid, pH 8.60, for the sample matrix. Simulation data show that it is possible to focus weak bases with a pKa value similar to that of the separation electrolyte, but it is restricted to weak bases having an electrophoretic mobility of 20 x 10(-9) m2/V x s or quicker. This mobility range can be extended by the addition of NaCl, with 50 mM NaCl allowing stacking of weak bases down to a mobility of 15 x 10(-9) m2/V x s and 100 mM extending the range to 10 x 10(-9) m2/V x s. The addition of NaCl does not adversely influence focusing of more mobile bases, but does prolong the existence of the transient pH boundary. This allows analytes to migrate extensively through the capillary as a single focused band around the transient pH boundary until the boundary is dissipated. This reduces the length of capillary that is available for separation and, in extreme cases, causes multiple analytes to be detected as a single highly efficient peak.     

Technique of calculating the deviations of the shape of cylindrical constructions relative to a circle of least deviation. Minimal annular zone

A technique of determining the deviations of shape relative to a circle of least deviations and an example illustrating its practical implementation are presented. __________ Translated from Izmeritel’naya Tekhnika, No. 5, pp. 40–41, May, 2007.     

Prohibitive factors to the acceptance of Internet of Things (IoT) technology in society: A smart-home context using a resistive modelling approach

With the advent of various Internet of Things (IoT) technologies, smart-homes have become an important application area. However, the low end-user penetration of the smart-home market as of 2021 points out towards the fact that the users are resistant to use home IoT and smart-home solutions. Privacy concerns is an important factor that hinders the smart-home adoption as per existing literatures. Unfortunately, current smart-home literatures have not focused enough on the theoretical aspect of the privacy concern construct per se, what are its various antecedents, and what constitutes the users’ privacy concerns. Consequently, in this work a resistive modelling approach is used focusing on the privacy aspect that hinders the diffusion of IoT-based smart-homes in the society. Innovation Resistance Theory (IRT) and Multidimensional Development Theory (MDT) are used as the theoretical background. Multiple antecedents of privacy concern are considered ranging from individual (user skill), technological to environmental factors (legal & policy aspect). Moreover, privacy concern is treated from three aspects of informational privacy, physical privacy, and psychological privacy. The proposed model is validated and tested using data collected from 463 users residing in Thailand. The differences in privacy perception and its effect on user resistance depending on gender and residence type is also discussed. Results show that the user characteristics of user skill has the highest impact on privacy concern, followed by legal & policy aspect, and technological aspect respectively. Moreover, physical, and psychological privacy are more important than informational privacy concerns. Appropriate theoretical and practical suggestions are provided based on the results.     

Noncompetitive immunoassay of small analytes at the femtomolar level by affinity probe capillary electrophoresis: direct analysis of digoxin using a uniform-labeled scFv immunoreagent

A general method for noncompetitive immunoassay of small analytes using affinity probe capillary electrophoresis (APCE) is demonstrated using digoxin as a model analyte. A uniform immunoreagent was prepared from a single-chain antibody (scFv) gene specific for digoxin. Site-directed mutagenesis introduced a unique cysteine residue for uniform labeling with a thiol-reactive fluorochrome. After expression in E. coli, the scFv was purified by immobilized metal affinity chromatography (IMAC) using an added C-terminal 6-histidine sequence. The protein was renatured and labeled while immobilized on the IMAC resin. After 0.02-microm filtration to remove microaggregates, the resulting reagent was highly uniform and stable at -12 degrees C for at least 1 year. Three formats of APCE using the scFv reagent were explored. A "mix-and-inject" assay optimized for low detection limits demonstrated analysis of 10 pM digoxin in aqueous standard solutions in 10 min. A rapid mix-and-inject format in a short capillary allowed detection of 1 nM digoxin in 1 min. Digoxin samples in serum and urine were injected directly after 10-fold dilution. In combination with solid-phase extraction, 400 fM digoxin was detected in 1 mL of serum. Including solid-phase extraction, reproducibility was within 2.5%, and the linear range was 3 orders of magnitude. The strategy adopted in this paper should be of general use in the low-level analysis of small analytes.     

Measuring long-term performance of a manufacturing firm using the Analytic Network Process (ANP) approach

This paper provides a multicriteria performance measurement model to measure a manufacturing firm's performance in terms of areas of success, which can be defined as critical areas in generating revenues and controlling costs in the operations of a manufacturing firm. In developing the performance measurement model, the Analytic Network Process (ANP) approach is used. The ANP approach, which is the general form of the Analytic Hierarchy Process (AHP) methodology, is recommended when independence among different elements of a system assumption is violated. In a manufacturing system, the system's attributes are interrelated. Furthermore, the relative importance of these attributes with respect to each other and their contribution to the overall performance are affected by the competitive strategies applied by the manufacturing firms. The performance evaluation model developed here incorporates the competitive strategies and interdependence between the system attributes in its hierarchical structure and achieves a more realistic and accurate representation of the firm's long-term performance.     

The composite structure of peak 5 in the glow curve of LiF:Mg,Ti (TLD-100): confirmation of peak 5a arising from a locally trapped electron-hole configuration

The hypothesis that glow peak 5a arises from localised e-h capture is confirmed by the following experimental observations: (i) The high conversion efficiency (CE) (CE5a-->4 = 3 +/- 0.5) of peak 5a to peak 4 (a hole-only trap) deduced from detailed Im-Tstop optical bleaching studies at 310 nm compared to the much lower CE of peak 5 (an electron-only trap) (CE5-->4 = 0.0026+/-0.012). (ii) The lack of an increase in the sensitivity of glow peak 5a following 2.6 MeV and 6.8 MeV He ion irradiation in 'sensitised' material compared to the factor two increase in the sensitivity of peak 5; (S/S0)5a = 0.86+/-0.12, compared to (S/S0)5 = 2.0+/-0.2. (iii) The late entry into saturation of the 2.6 MeV and 6.8 MeV He ion TL-fluence response curves for peak 5a compared to peak 5 in sensitised and normal material resulting in the following values for the track radial saturation parameter: (r50)5a = 100+/-20) Angstroms compared to (r50)5 = 380+/-30 Angstroms. (iv) The low value of 0.1 for the 'track-escape' parameter of peak 5a deduced from the Extended Track Interaction Model analysis of He ion TL fluence response compared to order of magnitude greater values for peaks 5 and 5b.