S‐Doped Carbon Fibers Uniformly Embedded with Ultrasmall TiO2 for Na+/Li+ Storage with High Capacity and Long‐Time Stability

Building a rechargeable battery with high capacity, high energy density, and long lifetime contributes to the development of novel energy storage devices in the future. Although carbon materials are very attractive anode materials for lithium‐ion batteries (LIBs), they present several deficiencies when used in sodium‐ion batteries (SIBs). The choice of an appropriate structural design and heteroatom doping are critical steps to improve the capacity and stability. Here, carbon‐based nanofibers are produced by sulfur doping and via the introduction of ultrasmall TiO₂ nanoparticles into the carbon fibers (CNF‐S@TiO₂). It is discovered that the introduction of TiO₂ into carbon nanofibers can significantly improve the specific surface area and microporous volume for carbon materials. The TiO₂ content is controlled to obtain CNF‐S@TiO₂‐5 to use as the anode material for SIBs/LIBs with enhanced electrochemical performance in Na⁺/Li⁺ storage. During the charge/discharge process, the S‐doping and the incorporation of TiO₂ nanoparticles into carbon fibers promote the insertion/extraction of the ions and enhance the capacity and cycle life. The capacity of CNF‐S@TiO₂‐5 can be maintained at ≈300 mAh g^?1 over 600 cycles at 2 A g^?1 in SIBs. Moreover, the capacity retention of such devices is 94%, showing high capacity and good stability.     

Efficient Laser‐Induced Construction of Oxygen‐Vacancy Abundant Nano‐ZnCo2O4/Porous Reduced Graphene Oxide Hybrids toward Exceptional Capacitive Lithium Storage

Recently, binary ZnCo₂O₄ has drawn enormous attention for lithium‐ion batteries (LIBs) as attractive anode owing to its large theoretical capacity and good environmental benignity. However, the modest electrical conductivity and serious volumetric effect/particle agglomeration over cycling hinder its extensive applications. To address the concerns, herein, a rapid laser‐irradiation methodology is firstly devised toward efficient synthesis of oxygen‐vacancy abundant nano‐ZnCo₂O₄/porous reduced graphene oxide (rGO) hybrids as anodes for LIBs. The synergistic contributions from nano‐dimensional ZnCo₂O₄ with rich oxygen vacancies and flexible rGO guarantee abundant active sites, fast electron/ion transport, and robust structural stability, and inhibit the agglomeration of nanoscale ZnCo₂O₄, favoring for superb electrochemical lithium‐storage performance. More encouragingly, the optimal L‐ZCO@rGO‐30 anode exhibits a large reversible capacity of ≈1053 mAh g^?1 at 0.05 A g^?1, excellent cycling stability (≈746 mAh g^?1 at 1.0 A g^?1 after 250 cycles), and preeminent rate capability (≈686 mAh g^?1 at 3.2 A g^?1). Further kinetic analysis corroborates that the capacitive‐controlled process dominates the involved electrochemical reactions of hybrid anodes. More significantly, this rational design holds the promise of being extended for smart fabrication of other oxygen‐vacancy abundant metal oxide/porous rGO hybrids toward advanced LIBs and beyond.     

Hierarchical Porous Nanosheets Constructed by Graphene‐Coated,Interconnected TiO2 Nanoparticles for Ultrafast Sodium Storage

Sodium‐ion batteries (SIBs) are considered promising next‐generation energy storage devices. However, a lack of appropriate high‐performance anode materials has prevented further improvements. Here, a hierarchical porous hybrid nanosheet composed of interconnected uniform TiO₂ nanoparticles and nitrogen‐doped graphene layer networks (TiO₂@NFG HPHNSs) that are synthesized using dual‐functional C₃N₄ nanosheets as both the self‐sacrificing template and hybrid carbon source is reported. These HPHNSs deliver high reversible capacities of 146 mA h g^?1 at 5 C for 8000 cycles, 129 mA h g^?1 at 10 C for 20 000 cycles, and 116 mA h g^?1 at 20 C for 10 000 cycles, as well as an ultrahigh rate capability up to 60 C with a capacity of 101 mA h g^?1. These results demonstrate the longest cyclabilities and best rate capability ever reported for TiO₂‐based anode materials for SIBs. The unprecedented sodium storage performance of the TiO₂@NFG HPHNSs is due to their unique composition and hierarchical porous 2D structure.     

Multichannel Porous TiO2 Hollow Nanofibers with Rich Oxygen Vacancies and High Grain Boundary Density Enabling Superior Sodium Storage Performance

TiO₂ as an anode for sodium‐ion batteries (NIBs) has attracted much recent attention, but poor cyclability and rate performance remain problematic owing to the intrinsic electronic conductivity and the sluggish diffusivity of Na ions in the TiO₂ matrix. Herein, a simple process is demonstrated to improve the sodium storage performance of TiO₂ by fabricating a 1D, multichannel, porous binary‐phase anatase‐TiO₂–rutile‐TiO₂ composite with oxygen‐deficient and high grain‐boundary density (denoted as a‐TiO_2?x /r‐TiO_2?x ) via electrospinning and subsequent vacuum treatment. The introduction of oxygen vacancies in the TiO₂ matrix enables enhanced intrinsic electronic conductivity and fast sodium‐ion diffusion kinetics. The porous structure offers easy access of the liquid electrolyte and a short transport path of Na⁺ through the pores toward the TiO₂ nanoparticle. Furthermore, the high density of grain boundaries between the anatase TiO₂ and rutile TiO₂ offer more interfaces for a novel interfacial storage. The a‐TiO_2?x /r‐TiO_2?x shows excellent long cycling stability (134 mAh g^?1 at 10 C after 4500 cycles) and superior rate performance (93 mAh g^?1 after 4500 cycles at 20 C) for sodium‐ion batteries. This simple and effective process could serve as a model for the modification of other materials applied in energy storage systems and other fields.     

Homojunction of Oxygen and Titanium Vacancies and its Interfacial n–p Effect

The homojunction of oxygen/metal vacancies and its interfacial n–p effect on the physiochemical properties are rarely reported. Interfacial n–p homojunctions of TiO₂ are fabricated by directly decorating interfacial p‐type titanium‐defected TiO₂ around n‐type oxygen‐defected TiO₂ nanocrystals in amorphous–anatase homogeneous nanostructures. Experimental measurements and theoretical calculations on the cell lattice parameters show that the homojunction of oxygen and titanium vacancies changes the charge density of TiO₂; a strong EPR signal caused by oxygen vacancies and an unreported strong titanium vacancies signal of 2D ¹H TQ‐SQ MAS NMR are present. Amorphous–anatase TiO₂ shows significant performance regarding the photogeneration current, photocatalysis, and energy storage, owing to interfacial n‐type to p‐type conductivity with high charge mobility and less structural confinement of amorphous clusters. A new “homojunction of oxygen and titanium vacancies” concept, characteristics, and mechanism are proposed at an atomic‐/nanoscale to clarify the generation of oxygen vacancies and titanium vacancies as well as the interface electron transfer.     

Mesoporous and Nanostructured TiO2 layer with Ultra‐High Loading on Nitrogen‐Doped Carbon Foams as Flexible and Free‐Standing Electrodes for Lithium‐Ion Batteries

A simple and green method is developed for the preparation of nanostructured TiO₂ supported on nitrogen‐doped carbon foams (NCFs) as a free‐standing and flexible electrode for lithium‐ion batteries (LIBs), in which the TiO₂ with 2.5–4 times higher loading than the conventional TiO₂‐based flexible electrodes acts as the active material. In addition, the NCFs act as a flexible substrate and efficient conductive networks. The nanocrystalline TiO₂ with a uniform size of ≈10 nm form a mesoporous layer covering the wall of the carbon foam. When used directly as a flexible electrode in a LIB, a capacity of 188 mA h g^?1 is achieved at a current density of 200 mA g^?1 for a potential window of 1.0–3.0 V, and a specific capacity of 149 mA h g^?1 after 100 cycles at a current density of 1000 mA g^?1 is maintained. The highly conductive NCF and flexible network, the mesoporous structure and nanocrystalline size of the TiO₂ phase, the firm adhesion of TiO₂ over the wall of the NCFs, the small volume change in the TiO₂ during the charge/discharge processes, and the high cut‐off potential contribute to the excellent capacity, rate capability, and cycling stability of the TiO₂/NCFs flexible electrode.     

MOF‐Derived CuS@Cu‐BTC Composites as High‐Performance Anodes for Lithium‐Ion Batteries

The CuS(x wt%)@Cu‐BTC (BTC = 1,3,5‐benzenetricarboxylate; x = 3, 10, 33, 58, 70, 99.9) materials are synthesized by a facile sulfidation reaction. The composites are composed of octahedral Cu₃(BTC)₂·(H₂O)₃ (Cu‐BTC) with a large specific surface area and CuS with a high conductivity. The as‐prepared CuS@Cu‐BTC products are first applied as the anodes of lithium‐ion batteries (LIBs). The synergistic effect between Cu‐BTC and CuS components can not only accommodate the volume change and stress relaxation of electrodes but also facilitate the fast transport of Li ions. Thus, it can greatly suppress the transformation process from Li₂S to polysulfides by improving the reversibility of the conversion reaction. Benefiting from the unique structural features, the optimal CuS(70 wt%)@Cu‐BTC sample exhibits a remarkably improved electrochemical performance, showing an over‐theoretical capacity up to 1609 mAh g^?1 after 200 cycles (100 mA g^?1) with an excellent rate‐capability of ≈490 mAh g^?1 at 1000 mA g^?1. The outstanding LIB properties indicate that the CuS(70 wt%)@Cu‐BTC sample is a highly desirable electrode material candidate for high‐performance LIBs.     

A High‐Capacity O2‐Type Li‐Rich Cathode Material with a Single‐Layer Li2MnO3 Superstructure

A high capacity cathode is the key to the realization of high‐energy‐density lithium‐ion batteries. The anionic oxygen redox induced by activation of the Li₂MnO₃ domain has previously afforded an O3‐type layered Li‐rich material used as the cathode for lithium‐ion batteries with a notably high capacity of 250–300 mAh g^?1. However, its practical application in lithium‐ion batteries has been limited due to electrodes made from this material suffering severe voltage fading and capacity decay during cycling. Here, it is shown that an O2‐type Li‐rich material with a single‐layer Li₂MnO₃ superstructure can deliver an extraordinary reversible capacity of 400 mAh g^?1 (energy density: ≈1360 Wh kg^?1). The activation of a single‐layer Li₂MnO₃ enables stable anionic oxygen redox reactions and leads to a highly reversible charge–discharge cycle. Understanding the high performance will further the development of high‐capacity cathode materials that utilize anionic oxygen redox processes.     

A Flexible Film toward High‐Performance Lithium Storage: Designing Nanosheet‐Assembled Hollow Single‐Hole Ni–Co–Mn–O Spheres with Oxygen Vacancy Embedded in 3D Carbon Nanotube/Graphene Network

Ternary transition metal oxides (TMOs) are highly potential electrode materials for lithium ion batteries (LIBs) due to abundant defects and synergistic effects with various metal elements in a single structure. However, low electronic/ionic conductivity and severe volume change hamper their practical application for lithium storage. Herein, nanosheet‐assembled hollow single‐hole Ni–Co–Mn oxide (NHSNCM) spheres with oxygen vacancies can be obtained through a facile hydrothermal reaction, which makes both ends of each nanosheet exposed to sufficient free space for volume variation, electrolyte for extra active surface area, and dual ion diffusion paths compared with airtight hollow structures. Furthermore, oxygen vacancies could improve ion/electronic transport and ion insertion/extraction process of NHSNCM spheres. Thus, oxygen‐vacancy‐rich NHSNCM spheres embedded into a 3D porous carbon nanotube/graphene network as the anode film ensure efficient electrolyte infiltration into both the exterior and interior of porous and open spheres for a high utilization of the active material, showing an excellent electrochemical performance for LIBs (1595 mAh g^?1 over 300 cycles at 2 A g^?1, 441.6 mAh g^?1 over 4000 cycles at 10 A g^?1). Besides, this straightforward synthetic method opens an efficacious avenue for the construction of various nanosheet‐assembled hollow single‐hole TMO spheres for potential applications.     

Boosting Sodium Storage in TiO2 Nanotube Arrays through Surface Phosphorylation

Sodium‐ion batteries (SIBs) offer a promise of a scalable, low‐cost, and environmentally benign means of renewable energy storage. However, the low capacity and poor rate capability of anode materials present an unavoidable challenge. In this work, it is demonstrated that surface phosphorylated TiO₂ nanotube arrays grown on Ti substrate can be efficient anode materials for SIBs. Fabrication of the phosphorylated nanoarray film is based on the electrochemical anodization of Ti metal in NH₄F solution and subsequent phosphorylation using sodium hypophosphite. The phosphorylated TiO₂ nanotube arrays afford a reversible capacity of 334 mA h g^?1 at 67 mA g^?1, a superior rate capability of 147 mA h g^?1 at 3350 mA g^?1, and a stable cycle performance up to 1000 cycles. In situ X‐ray diffraction and transmission electron microscopy reveal the near‐zero strain response and robust mechanical behavior of the TiO₂ host upon (de)sodiation, suggesting its excellent structural stability in the Na⁺ storage application.     

A Metal‐Free,Free‐Standing,Macroporous Graphene@g‐C3N4 Composite Air Electrode for High‐Energy Lithium Oxygen Batteries

The nonaqueous lithium oxygen battery is a promising candidate as a next‐generation energy storage system because of its potentially high energy density (up to 2–3 kW kg^?1), exceeding that of any other existing energy storage system for storing sustainable and clean energy to reduce greenhouse gas emissions and the consumption of nonrenewable fossil fuels. To achieve high energy density, long cycling stability, and low cost, the air electrode structure and the electrocatalysts play important roles. Here, a metal‐free, free‐standing macroporous graphene@graphitic carbon nitride (g‐C₃N₄) composite air cathode is first reported, in which the g‐C₃N₄ nanosheets can act as efficient electrocatalysts, and the macroporous graphene nanosheets can provide space for Li₂O₂ to deposit and also promote the electron transfer. The electrochemical results on the graphene@g‐C₃N₄ composite air electrode show a 0.48 V lower charging plateau and a 0.13 V higher discharging plateau than those of pure graphene air electrode, with a discharge capacity of nearly 17300 mA h g^?1 _(composite). Excellent cycling performance, with terminal voltage higher than 2.4 V after 105 cycles at 1000 mA h g^?1 _(composite) capacity, can also be achieved. Therefore, this hybrid material is a promising candidate for use as a high energy, long‐cycle‐life, and low‐cost cathode material for lithium oxygen batteries.     

Flexible and Binder‐Free Electrodes of Sb/rGO and Na3V2(PO4)3/rGO Nanocomposites for Sodium‐Ion Batteries

Flexible power sources have shown great promise in next‐generation bendable, implantable, and wearable electronic systems. Here, flexible and binder‐free electrodes of Na₃V₂(PO₄)₃/reduced graphene oxide (NVP/rGO) and Sb/rGO nanocomposites for sodium‐ion batteries are reported. The Sb/rGO and NVP/rGO paper electrodes with high flexibility and tailorability can be easily fabricated. Sb and NVP nanoparticles are embedded homogenously in the interconnected framework of rGO nanosheets, which provides structurally stable hosts for Na‐ion intercalation and deintercalation. The NVP/rGO paper‐like cathode delivers a reversible capacity of 113 mAh g^?1 at 100 mA g^?1 and high capacity retention of ≈96.6% after 120 cycles. The Sb/rGO paper‐like anode gives a highly reversible capacity of 612 mAh g^?1 at 100 mA g^?1, an excellent rate capacity up to 30 C, and a good cycle performance. Moreover, the sodium‐ion full cell of NVP/rGO//Sb/rGO has been fabricated, delivering a highly reversible capacity of ≈400 mAh g^?1 at a current density of 100 mA g^?1 after 100 charge/discharge cycles. This work may provide promising electrode candidates for developing next‐generation energy‐storage devices with high capacity and long cycle life.     

Construction of Bimetallic Selenides Encapsulated in Nitrogen/Sulfur Co‐Doped Hollow Carbon Nanospheres for High‐Performance Sodium/Potassium‐Ion Half/Full Batteries

Metallic selenides have been widely investigated as promising electrode materials for metal‐ion batteries based on their relatively high theoretical capacity. However, rapid capacity decay and structural collapse resulting from the larger‐sized Na⁺/K⁺ greatly hamper their application. Herein, a bimetallic selenide (MoSe₂/CoSe₂) encapsulated in nitrogen, sulfur‐codoped hollow carbon nanospheres interconnected reduced graphene oxide nanosheets (rGO@MCSe) are successfully designed as advanced anode materials for Na/K‐ion batteries. As expected, the significant pseudocapacitive charge storage behavior substantially contributes to superior rate capability. Specifically, it achieves a high reversible specific capacity of 311 mAh g^?1 at 10 A g^?1 in NIBs and 310 mAh g^?1 at 5 A g^?1 in KIBs. A combination of ex situ X‐ray diffraction, Raman spectroscopy, and transmission electron microscopy tests reveals the phase transition of rGO@MCSe in NIBs/KIBs. Unexpectedly, they show quite different Na⁺/K⁺ insertion/extraction reaction mechanisms for both cells, maybe due to more sluggish K⁺ diffusion kinetics than that of Na⁺. More significantly, it shows excellent energy storage properties in Na/K‐ion full cells when coupled with Na₃V₂(PO₄)₂O₂F and PTCDA@450 °C cathodes. This work offers an advanced electrode construction guidance for the development of high‐performance energy storage devices.     

CuO Nanoplates for High‐Performance Potassium‐Ion Batteries

Potassium‐ion batteries (KIBs) are promising alternatives to lithium‐ion batteries because of the abundance and low cost of K. However, an important challenge faced by KIBs is the search for high‐capacity materials that can hold large‐diameter K ions. Herein, copper oxide (CuO) nanoplates are synthesized as high‐performance anode materials for KIBs. CuO nanoplates with a thickness of ≈20 nm afford a large electrode–electrolyte contact interface and short K⁺ ion diffusion distance. As a consequence, a reversible capacity of 342.5 mAh g^?1 is delivered by the as‐prepared CuO nanoplate electrode at 0.2 A g^?1. Even after 100 cycles at a high current density of 1.0 A g^?1, the capacity of the electrode remains over 206 mAh g^?1, which is among the best values for KIB anodes reported in the literature. Moreover, a conversion reaction occurs at the CuO anode. Cu nanoparticles form during the first potassiation process and reoxidize to Cu₂O during the depotassiation process. Thereafter, the conversion reaction proceeds between the as‐formed Cu₂O and Cu, yielding a reversible theoretical capacity of 374 mAh g^?1. Considering their low cost, easy preparation, and environmental benignity, CuO nanoplates are promising KIB anode materials.     

Tin Sulfide‐Based Nanohybrid for High‐Performance Anode of Sodium‐Ion Batteries

Nanohybrid anode materials for Na‐ion batteries (NIBs) based on conversion and/or alloying reactions can provide significantly improved energy and power characteristics, while suffering from low Coulombic efficiency and unfavorable voltage properties. An NIB paper‐type nanohybrid anode (PNA) based on tin sulfide nanoparticles and acid‐treated multiwalled carbon nanotubes is reported. In 1 m NaPF₆ dissolved in diethylene glycol dimethyl ether as an electrolyte, the above PNA shows a high reversible capacity of ≈1200 mAh g^?1 and a large voltage plateau corresponding to a capacity of ≈550 mAh g^?1 in the low‐voltage region of ≈0.1 V versus Na⁺/Na, exhibiting high rate capabilities at a current rate of 1 A g^?1 and good cycling performance over 250 cycles. In addition, the PNA exhibits a high first Coulombic efficiency of ≈90%, achieving values above 99% during subsequent cycles. Furthermore, the feasibility of PNA usage is demonstrated by full‐cell tests with a reported cathode, which results in high specific energy and power values of ≈256 Wh kg^?1 and 471 W kg^?1, respectively, with stable cycling.     

In Situ Encapsulating α‐MnS into N,S‐Codoped Nanotube‐Like Carbon as Advanced Anode Material: α → β Phase Transition Promoted Cycling Stability and Superior Li/Na‐Storage Performance in Half/Full Cells

Incorporation of N,S‐codoped nanotube‐like carbon (N,S‐NTC) can endow electrode materials with superior electrochemical properties owing to the unique nanoarchitecture and improved kinetics. Herein, α‐MnS nanoparticles (NPs) are in situ encapsulated into N,S‐NTC, preparing an advanced anode material (α‐MnS@N,S‐NTC) for lithium‐ion/sodium‐ion batteries (LIBs/SIBs). It is for the first time revealed that electrochemical α → β phase transition of MnS NPs during the 1st cycle effectively promotes Li‐storage properties, which is deduced by the studies of ex situ X‐ray diffraction/high‐resolution transmission electron microscopy and electrode kinetics. As a result, the optimized α‐MnS@N,S‐NTC electrode delivers a high Li‐storage capacity (1415 mA h g^?1 at 50 mA g^?1), excellent rate capability (430 mA h g^?1 at 10 A g^?1), and long‐term cycling stability (no obvious capacity decay over 5000 cycles at 1 A g^?1) with retained morphology. In addition, the N,S‐NTC‐based encapsulation plays the key roles on enhancing the electrochemical properties due to its high conductivity and unique 1D nanoarchitecture with excellent protective effects to active MnS NPs. Furthermore, α‐MnS@N,S‐NTC also delivers high Na‐storage capacity (536 mA h g^?1 at 50 mA g^?1) without the occurrence of such α → β phase transition and excellent full‐cell performances as coupling with commercial LiFePO₄ and LiNi_0.6Co_0.2Mn_0.2O₂ cathodes in LIBs as well as Na₃V₂(PO₄)₂O₂F cathode in SIBs.     

Oxygen‐Vacancy and Surface Modulation of Ultrathin Nickel Cobaltite Nanosheets as a High‐Energy Cathode for Advanced Zn‐Ion Batteries

The development of high‐capacity, Earth‐abundant, and stable cathode materials for robust aqueous Zn‐ion batteries is an ongoing challenge. Herein, ultrathin nickel cobaltite (NiCo₂O₄) nanosheets with enriched oxygen vacancies and surface phosphate ions (P–NiCo₂O_4‐x) are reported as a new high‐energy‐density cathode material for rechargeable Zn‐ion batteries. The oxygen‐vacancy and surface phosphate‐ion modulation are achieved by annealing the pristine NiCo₂O₄ nanosheets using a simple phosphating process. Benefiting from the merits of substantially improved electrical conductivity and increased concentration of active sites, the optimized P–NiCo₂O_4‐x nanosheet electrode delivers remarkable capacity (309.2 mAh g^?1 at 6.0 A g^?1) and extraordinary rate performance (64% capacity retention at 60.4 A g^?1). Moreover, based on the P–NiCo₂O_4‐x cathode, our fabricated P–NiCo₂O_4‐x//Zn battery presents an impressive specific capacity of 361.3 mAh g^?1 at the high current density of 3.0 A g^?1 in an alkaline electrolyte. Furthermore, extremely high energy density (616.5 Wh kg^?1) and power density (30.2 kW kg^?1) are also achieved, which outperforms most of the previously reported aqueous Zn‐ion batteries. This ultrafast and high‐energy aqueous Zn‐ion battery is promising for widespread application to electric vehicles and intelligent devices.     

Size‐Tunable Olive‐Like Anatase TiO2 Coated with Carbon as Superior Anode for Sodium‐Ion Batteries

Olive‐shaped anatase TiO₂ with tunable sizes in nanoscale are designed employing polyvinyl alcohol (PVA) as structure directing agents to exert dramatic impacts on structure shaping and size manipulation. Notably, the introduced PVA simultaneously serves as carbon sources, bringing about a homogenous carbon layer with intimate coupling interfaces for boosted electronic conductivity. Constructed from tiny crystalline grains, the uniformly dispersed carbon‐coated TiO₂ nano‐olives (TOC) possess subtle loose structure internally for prompt Na⁺ transportations. When utilized for sodium‐ion storage, the size effects are increasingly significant at high charge–discharge rates, leading to the much superior rate performances of TOC with the smallest size. Bestowed by the improved Na⁺ adsorption and diffusion kinetics together with the promoted electron transfer, it delivers a high specific capacity of 267 mAh g^?1 at 0.1 C (33.6 mA g^?1) and sustains 110 mAh g^?1 at a rather high rate of 20 C. Even after cycled at 10 C over 1000 cycles, a considerable capacity of 125 mAh g^?1 with a retention of 94.6% is still obtained, highlighting its marvelous long‐term cyclability and high‐rate capabilities.     

Hierarchical TiO2/SnO2 Hollow Spheres Coated with Graphitized Carbon for High‐Performance Electrochemical Li‐Ion Storage

A self‐templated strategy is developed to fabricate hierarchical TiO₂/SnO₂ hollow spheres coated with graphitized carbon (HTSO/GC‐HSs) by combined sol–gel processes with hydrothermal treatment and calcination. The as‐prepared mesoporous HTSO/GC‐HSs present an approximate yolk‐double–shell structure, with high specific area and small nanocrystals of TiO₂ and SnO₂, and thus exhibit superior electrochemical reactivity and stability when used as anode materials for Li‐ion batteries. A high reversible specific capacity of about 310 mAh g^?1 at a high current density of 5 A g^?1 can be achieved over 500 cycles indicating very good cycle stability and rate performance.     

Enhanced Capacity and Rate Capability of Nitrogen/Oxygen Dual‐Doped Hard Carbon in Capacitive Potassium‐Ion Storage

The intercalation of potassium ions into graphite is demonstrated to be feasible, while the electrochemical performance of potassium‐ion batteries (KIBs) remains unsatisfying. More effort is needed to improve the specific capacity while maintaining a superior rate capability. As an attempt, nitrogen/oxygen dual‐doped hierarchical porous hard carbon (NOHPHC) is introduced as the anode in KIBs by carbonizing and acidizing the NH₂‐MIL‐101(Al) precursor. Specifically, the NOHPHC electrode delivers high reversible capacities of 365 and 118 mA h g^?1 at 25 and 3000 mA g^?1, respectively. The capacity retention reaches 69.5% at 1050 mA g^?1 for 1100 cycles. The reasons for the enhanced electrochemical performance, such as the high capacity, good cycling stability, and superior rate capability, are analyzed qualitatively and quantitatively. Quantitative analysis reveals that mixed mechanisms, including capacitance and diffusion, account for the K‐ion storage, in which the capacitance plays a more important role. Specifically, the enhanced interlayer spacing (0.39 nm) enables the intercalation of large K ions, while the high specific surface area of ≈1030 m² g^?1 and the dual‐heteroatom doping (N and O) are conducive to the reversible adsorption of K ions.