Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11%

Fabricating solar cells with tandem structure is an efficient way to broaden the photon response range without further increasing the thermalization loss in the system. In this work, a tandem organic solar cell (TOSC) based on highly efficient nonfullerene acceptors (NFAs) with series connection type is demonstrated. To meet the different demands of front and rear sub‐cells, two NFAs named F‐M and NOBDT with a whole absorption range from 300 to 900 nm are designed, when blended with wide bandgap polymer poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione))] (PBDB‐T) and narrow bandgap polymer PTB7‐Th, respectively, the PBDB‐T: F‐M system exhibits a high V_oc of 0.98 V and the PTB7‐Th: NOBDT system shows a remarkable J_sc of 19.16 mA cm^?2, which demonstrate their potential in the TOSCs. With the guidance of optical simulation, by systematically optimizing the thickness of each layer in the TOSC, an outstanding power conversion efficiency of 14.11%, with a V_oc of 1.71 V, a J_sc of 11.72 mA cm^?2, and a satisfactory fill factor of 0.70 is achieved; this result is one of the top efficiencies reported to date in the field of organic solar cells.     

Efficient Semitransparent Organic Solar Cells with Tunable Color enabled by an Ultralow‐Bandgap Nonfullerene Acceptor

Semitransparent organic solar cells (OSCs) show attractive potential in power‐generating windows. However, the development of semitransparent OSCs is lagging behind opaque OSCs. Here, an ultralow‐bandgap nonfullerene acceptor, “IEICO‐4Cl”, is designed and synthesized, whose absorption spectrum is mainly located in the near‐infrared region. When IEICO‐4Cl is blended with different polymer donors (J52, PBDB‐T, and PTB7‐Th), the colors of the blend films can be tuned from purple to blue to cyan, respectively. Traditional OSCs with a nontransparent Al electrode fabricated by J52:IEICO‐4Cl, PBDB‐T:IEICO‐4Cl, and PTB7‐Th:IEICO‐4Cl yield power conversion efficiencies (PCE) of 9.65 ± 0.33%, 9.43 ± 0.13%, and 10.0 ± 0.2%, respectively. By using 15 nm Au as the electrode, semitransparent OSCs based on these three blends also show PCEs of 6.37%, 6.24%, and 6.97% with high average visible transmittance (AVT) of 35.1%, 35.7%, and 33.5%, respectively. Furthermore, via changing the thickness of Au in the OSCs, the relationship between the transmittance and efficiency is studied in detail, and an impressive PCE of 8.38% with an AVT of 25.7% is obtained, which is an outstanding value in the semitransparent OSCs.     

Efficient Nonfullerene Polymer Solar Cells Enabled by a Novel Wide Bandgap Small Molecular Acceptor

A wide bandgap small molecular acceptor, SFBRCN, containing a 3D spirobifluorene core flaked with a 2,1,3‐benzothiadiazole (BT) and end‐capped with highly electron‐deficient (3‐ethylhexyl‐4‐oxothiazolidine‐2‐yl)dimalononitrile (RCN) units, has been successfully synthesized as a small molecular acceptor (SMA) for nonfullerene polymer solar cells (PSCs). This SMA exhibits a relatively wide optical bandgap of 2.03 eV, which provides a complementary absorption to commonly used low bandgap donor polymers, such as PTB7‐Th. The strong electron‐deficient BT and RCN units afford SFBRCN with a low‐lying LUMO (lowest unoccupied molecular orbital) level, while the 3D structured spirobifluorene core can effectively suppress the self‐aggregation tendency of the SMA, thus yielding a polymer:SMA blend with reasonably small domain size. As the results of such molecular design, SFBRCN enables nonfullerene PSCs with a high efficiency of 10.26%, which is the highest performance reported to date for a large bandgap nonfullerene SMA.     

Fused Hexacyclic Nonfullerene Acceptor with Strong Near‐Infrared Absorption for Semitransparent Organic Solar Cells with 9.77% Efficiency

A fused hexacyclic electron acceptor, IHIC, based on strong electron‐donating group dithienocyclopentathieno[3,2‐b ]thiophene flanked by strong electron‐withdrawing group 1,1‐dicyanomethylene‐3‐indanone, is designed, synthesized, and applied in semitransparent organic solar cells (ST‐OSCs). IHIC exhibits strong near‐infrared absorption with extinction coefficients of up to 1.6 × 10⁵m ^?1 cm^?1, a narrow optical bandgap of 1.38 eV, and a high electron mobility of 2.4 × 10^?3 cm² V^?1 s^?1. The ST‐OSCs based on blends of a narrow‐bandgap polymer donor PTB7‐Th and narrow‐bandgap IHIC acceptor exhibit a champion power conversion efficiency of 9.77% with an average visible transmittance of 36% and excellent device stability; this efficiency is much higher than any single‐junction and tandem ST‐OSCs reported in the literature.     

Efficient Semitransparent Solar Cells with High NIR Responsiveness Enabled by a Small‐Bandgap Electron Acceptor

Inspired by the remarkable promotion of power conversion efficiency (PCE), commercial applications of organic photovoltaics (OPVs) can be foreseen in near future. One of the most promising applications is semitransparent (ST) solar cells that can be utilized in value‐added applications such as energy‐harvesting windows. However, the single‐junction STOPVs utilizing fullerene acceptors show relatively low PCEs of 4%–6% due to the limited sunlight absorption because it is a dilemma that more photons need to be harvested in UV–vis–near‐infrared (NIR) region to generate high photocurrent, which leads to the significant reduction of device transparency. This study describes the development of a new small‐bandgap electron‐acceptor material ATT‐2, which shows a strong NIR absorption between 600 and 940 nm with an E _g^opt of 1.32 eV. By combining with PTB7‐Th, the as‐cast OPVs yield PCEs of up to 9.58% with a fill factor of 0.63, an open‐circuit voltage of 0.73 V, and a very high short‐circuit current of 20.75 mA cm^?2. Owing to the favorable complementary absorption of low‐bangap PTB7‐Th and small‐bandgap ATT‐2 in NIR region, the proof‐of‐concept STOPVs show the highest PCE of 7.7% so far reported for single‐junction STOPVs with a high transparency of 37%.     

Efficient Organic Solar Cells with Non‐Fullerene Acceptors

Fullerene‐free OSCs employing n‐type small molecules or polymers as the acceptors have recently experienced a rapid rise with efficiencies exceeding 12%. Owing to the good optoelectronic and morphological tunabilities, non‐fullerene acceptors exhibit great potential for realizing high‐performance and practical OSCs. In this Review, recent exciting progress made in developing highly efficient non‐fullerene acceptors is summarized, mainly correlating factors like absorption, energy loss and morphology of new materials to their correspondent photovoltaic performance.     

A Tandem Organic Solar Cell with PCE of 14.52% Employing Subcells with the Same Polymer Donor and Two Absorption Complementary Acceptors

The tandem structure is an efficient way to simultaneously tackle absorption and thermalization losses of the single junction solar cells. In this work, a high‐performance tandem organic solar cell (OSC) using two subcells with the same donor poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione))] (PBDB‐T) and two acceptors, F‐M and 2,9‐bis(2‐methylene‐(3(1,1‐dicyanomethylene)benz[f ]indanone))7,12‐dihydro‐(4,4,10,10‐tetrakis(4‐hexylphenyl)‐5,11‐diocthylthieno[3′,2′:4,5]cyclopenta[1,2‐b]thieno[2″,3″:3′,4′]cyclopenta[1′,2′:4,5]thieno[2,3‐f][1]benzothiophene (NNBDT), with complementary absorptions is demonstrated. The two subcells show high V_oc with value of 0.99 V for the front cell and 0.86 V for the rear cell, which is the prerequisite for obtaining high V_oc of their series‐connected tandem device. Although there is much absorption overlap for the subcells, a decent J_sc of the tandem cell is still obtained owing to the complementary absorption of the two acceptors in a wide range. With systematic device optimizations, a best power conversion efficiency of 14.52% is achieved for the tandem device, with a high V_oc of 1.82 V, a notable FF of 74.7%, and a decent J_sc of 10.68 mA cm^?2. This work demonstrates a promising strategy of fabricating high‐efficiency tandem OSCs through elaborate selection of the active layer materials in each subcell and tradeoff of the V_oc and J_sc of the tandem cells.     

Highly Efficient Ternary‐Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance

In this work, highly efficient ternary‐blend organic solar cells (TB‐OSCs) are reported based on a low‐bandgap copolymer of PTB7‐Th, a medium‐bandgap copolymer of PBDB‐T, and a wide‐bandgap small molecule of SFBRCN. The ternary‐blend layer exhibits a good complementary absorption in the range of 300–800 nm, in which PTB7‐Th and PBDB‐T have excellent miscibility with each other and a desirable phase separation with SFBRCN. In such devices, there exist multiple energy transfer pathways from PBDB‐T to PTB7‐Th, and from SFBRCN to the above two polymer donors. The hole‐back transfer from PTB7‐Th to PBDB‐T and multiple electron transfers between the acceptor and the donor materials are also observed for elevating the whole device performance. After systematically optimizing the weight ratio of PBDB‐T:PTB7‐Th:SFBRCN, a champion power conversion efficiency (PCE) of 12.27% is finally achieved with an open‐circuit voltage (V _oc) of 0.93 V, a short‐circuit current density (J _sc) of 17.86 mA cm^?2, and a fill factor of 73.9%, which is the highest value for the ternary OSCs reported so far. Importantly, the TB‐OSCs exhibit a broad composition tolerance with a high PCE over 10% throughout the whole blend ratios.     

13.7% Efficiency Small‐Molecule Solar Cells Enabled by a Combination of Material and Morphology Optimization

Compared with the quick development of polymer solar cells, achieving high‐efficiency small‐molecule solar cells (SMSCs) remains highly challenging, as they are limited by the lack of matched materials and morphology control to a great extent. Herein, two small molecules, BSFTR and Y6, which possess broad as well as matched absorption and energy levels, are applied in SMSCs. Morphology optimization with sequential solvent vapor and thermal annealing makes their blend films show proper crystallinity, balanced and high mobilities, and favorable phase separation, which is conducive for exciton dissociation, charge transport, and extraction. These contribute to a remarkable power conversion efficiency up to 13.69% with an open‐circuit voltage of 0.85 V, a high short‐circuit current of 23.16 mA cm^?2 and a fill factor of 69.66%, which is the highest value among binary SMSCs ever reported. This result indicates that a combination of materials with matched photoelectric properties and subtle morphology control is the inevitable route to high‐performance SMSCs.     

Highly Efficient Semitransparent Organic Solar Cells with Color Rendering Index Approaching 100

Neutral‐colored semitransparent organic solar cells (ST‐OSCs) have attracted considerable attention owing to their unique application in no‐visual‐obstacle building‐integrated photovoltaics. Toward this promising potential application, a synergistic effect is first proposed by employing a dielectric mirror and ternary photoactive layer with near‐infrared absorption to tune the color perception as well as ST‐OSC performance precisely. As a result, a neutral‐color ST‐OSC with high average transmittance of over 21% is successfully constructed, and a remarkable color‐rendering index approaching 100 and high power conversion efficiency (PCE) of 9.37% are simultaneously achieved. To the best of our knowledge, this is the highest PCE reported for neutral‐color ST‐OSCs to date. Importantly, this synergistic effect is demonstrated to be a universal strategy that is not only suitable for various photoactive layer systems, but can also be implanted in flexible substrate. The resulting neutral‐color flexible ST‐OSCs also show a promising PCE of 8.76%.     

Fine‐Tuning the Energy Levels of a Nonfullerene Small‐Molecule Acceptor to Achieve a High Short‐Circuit Current and a Power Conversion Efficiency over 12% in Organic Solar Cells

Organic solar cell optimization requires careful balancing of current–voltage output of the materials system. Here, such optimization using ultrafast spectroscopy as a tool to optimize the material bandgap without altering ultrafast photophysics is reported. A new acceptor–donor–acceptor (A–D–A)‐type small‐molecule acceptor NCBDT is designed by modification of the D and A units of NFBDT. Compared to NFBDT, NCBDT exhibits upshifted highest occupied molecular orbital (HOMO) energy level mainly due to the additional octyl on the D unit and downshifted lowest unoccupied molecular orbital (LUMO) energy level due to the fluorination of A units. NCBDT has a low optical bandgap of 1.45 eV which extends the absorption range toward near‐IR region, down to ≈860 nm. However, the 60 meV lowered LUMO level of NCBDT hardly changes the V_oc level, and the elevation of the NCBDT HOMO does not have a substantial influence on the photophysics of the materials. Thus, for both NCBDT‐ and NFBDT‐based systems, an unusually slow (≈400 ps) but ultimately efficient charge generation mediated by interfacial charge‐pair states is observed, followed by effective charge extraction. As a result, the PBDB‐T:NCBDT devices demonstrate an impressive power conversion efficiency over 12%—among the best for solution‐processed organic solar cells.     

Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells

High‐performance ternary organic solar cells are fabricated by using a wide‐bandgap polymer donor (bithienyl‐benzodithiophene‐alt‐fluorobenzotriazole copolymer, J52) and two well‐miscible nonfullerene acceptors, methyl‐modified nonfullerene acceptor (IT‐M) and 2,2′‐((2Z ,2′Z )‐((5,5′‐(4,4,9,9‐tetrakis(4‐hexylphenyl)‐4,9‐dihydros‐indaceno[1,2‐b :5,6‐b ′]dithiophene‐2,7‐diyl)bis(4‐((2‐ethylhexyl)oxy)thiophene‐5,2‐diyl))bis(methanylylidene))bis(3‐oxo‐2,3‐dihydro‐1H ‐indene‐2,1‐diylidene))dimalononitrile (IEICO). The two acceptors with complementary absorption spectra and similar lowest unoccupied molecular orbital levels show excellent compatibility in the blend due to their very similar chemical structures. Consequently, the obtained ternary organic solar cells (OSC) exhibits a high efficiency of 11.1%, with an enhanced short‐circuit current density of 19.7 mA cm^?2 and a fill factor of 0.668. In this ternary system, broadened absorption, similar output voltages, and compatible morphology are achieved simultaneously, demonstrating a promising strategy to further improve the performance of ternary OSCs.     

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors

A ternary structure has been demonstrated as being an effective strategy to realize high power conversion efficiency (PCE) in organic solar cells (OSCs); however, general materials selection rules still remain incompletely understood. In this work, two nonfullerene small‐molecule acceptors 3TP3T‐4F and 3TP3T‐IC are synthesized and incorporated as a third component in PM6:Y6 binary blends. The photovoltaic behaviors in the resultant ternary OSCs differ significantly, despite the comparable energy levels. It is found that incorporation of 15% 3TP3T‐4F into the PM6:Y6 blend results in facilitating exciton dissociation, increasing charge transport, and reducing trap‐assisted recombination. All these features are responsible for the enlarged PCE of 16.7% (certified as 16.2%) in the PM6:Y6:3TP3T‐4F ternary OSCs, higher than that (15.6%) in the 3TP3T‐IC containing ternary devices. The performance differences are mainly ascribed to the compatibility between the third component and the host materials. The 3TP3T‐4F guest acceptor exhibits an excellent compatibility with Y6, tending to form well‐mixed phases in the ternary blend without disrupting the favored bicontinuous transport networks, whereas 3TP3T‐IC displays a morphological incompatibility with Y6. This work highlights the importance of considering the compatibility for materials selection toward high‐efficiency ternary organic OSCs.