Defect Engineering and Surface Functionalization of Nanocarbons for Metal‐Free Catalysis

With the advent of carbon nanotechnology, which initiated significant research efforts more than two decades ago, novel materials for energy harvesting and storage have emerged at an amazing pace. Nevertheless, some fundamental applications are still dominated by traditional materials, and it is especially evident in the case of catalysis, and environmental‐related electrochemical reactions, where precious metals such as Pt and Ir are widely used. Several strategies are being explored for achieving competitive and feasible metal‐free carbon nanomaterials, among which doping and defect engineering approaches within nanocarbons are recurrent and promising. Here, the most recent efforts regarding the control of doping and defects in carbon nanostructures for catalysis, and in particular for energy‐related applications, are addressed. Finally, an overview of alternative proposals that can make a difference when enabling carbon nanomaterials as efficient and emerging catalysts is presented.     

Boron nitride-based electrocatalysts for HER,OER, and ORR: A mini-review

A reliable and efficient solution to the current energy crisis and its associated environmental issues is provided by fuel cells, metal–air batteries and overall water splitting. The heart reactions for these technologies are oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Different supporters such as graphene, carbon nanotube, and graphitic carbon nitride have been used to avoid agglomeration of active materials and provide maximum active surface for these reactions. Among all the supporters, boron nitride (BN) gains extensive research attention due to its analogue with graphene and excellent stability with good oxidation and chemical inertness. In this mini-review, the well-known strategies (exfoliation, annealing, and CVD) used in the synthesis of BN with different morphologies for HER, OER and ORR applications have been briefly debated and summarized. The comparative analysis determines that the performance and stability of state-of-the-art electrocatalysts can be further boosted if they are deposited on BN. It is revealed that BN-based catalysts for HER, OER and ORR are rarely studied yet especially with non-noble transition metals, and this research direction should be studied deeply in future for practical applications.     

Template Conversion of Covalent Organic Frameworks into 2D Conducting Nanocarbons for Catalyzing Oxygen Reduction Reaction

Progress over the past decades in porous materials has exerted great effect on the design of metal‐free carbon electrochemical catalysts in fuel cells. The carbon material must combine three functions, i.e., electrical conductivity for electron transport, optimal pores for ion motion, and abundant heteroatom sites for catalysis. Here, an ideal carbon catalyst is achieved by combining two strategies—the use of a 2D covalent organic framework (COF) and the development of a suitable template to guide the pyrolysis. The COF produces nanosized carbon sheets that combine high conductivity, hierarchical porosity, and abundant heteroatom catalytic edges. The catalysts achieve superior performance to authentic Pt/C with exceptional onset potential (0 V vs ?0.03 V), half‐wave potentials (?0.11 V vs ?0.16 V), high limit current density (7.2 mA cm^?2 vs 6.0 mA cm^?2), low Tafel slope (110 mV decade^?1 vs 121 mV decade^?1), long‐time stability, and methanol tolerance. These results reveal a novel material platform based on 2D COFs for designing novel 2D carbon materials.     

NiMoFe and NiMoFeP as Complementary Electrocatalysts for Efficient Overall Water Splitting and Their Application in PV‐Electrolysis with STH 12.3%

Complementary water splitting electrocatalysts used simultaneously in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can simplify water splitting systems. Herein, earth‐abundant NiMoFe (NMF) and phosphorized NiMoFeP (NMFP) are synthesized as complementary overall water splitting (OWS) catalysts. First, NMF is tested as both the HER and OER promoter, which exhibits low overpotentials of 68 (HER) and 337 mV (OER). A quaternary NMFP is then prepared by simple phosphorization of NMF, which shows a much lower OER overpotential of 286 mV. The enhanced OER activity is attributed to the unique surface/core structure of NMFP. The surface phosphate acts as a proton transport mediator and expedites the rate‐determining step. With the application of OER potential, the NMFP surface is composed of Ni(OH)₂ and FeOOH, active sites for OER, but the inner core consists of Ni, Mo, and Fe metals, serving as a conductive electron pathway. OWS with NMF‐NMFP requires an applied voltage of 1.452 V to generate 10 mA cm^?2, which is one of the lowest values among OWS results with transition‐metal‐based electrocatalysts. Furthermore, the catalysts are combined with tandem perovskite solar cells for photovoltaic (PV)‐electrolysis, producing a high solar‐to‐hydrogen (STH) conversion efficiency of 12.3%.     

Mn-doped perovskite-type oxide LaFeO3 as highly active and durable bifunctional electrocatalysts for oxygen electrode reactions

Perovskite oxides based on the alkaline earth metal lanthanum for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline electrolytes are promising catalysts, but their catalytic activity and stability remain unsatisfactory. Here, we synthesized a series of LaFe_1−xMn_xO₃ (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1) perovskite oxides by doping Mn into LaFeO₃ (LF). The results show that the doping amount of Mn has a significant effect on the catalytic performance. When x = 0.5, the catalyst LaFe_0.5Mn_0.5O₃ (LFM) exhibits the best performance. The limiting current density in 0.1 mol·L⁻¹ KOH solution is 7 mA·cm⁻², much larger than that of the commercial Pt/C catalyst (5.5 mA·cm⁻²). Meanwhile, the performance of the doped catalyst is also superior to that of commercial Pt/C in terms of the long-term durability. The excellent catalytic performance of LFM may be ascribed to its abundant O²⁻/O⁻ species and low charge transfer resistance after doping the Mn element.     

Activity Origins in Nanocarbons for the Electrocatalytic Hydrogen Evolution Reaction

Sustainable hydrogen production is an essential prerequisite for realizing the future hydrogen economy. The electrocatalytic hydrogen evolution reaction (HER), as the cornerstone of exploring the mechanism of water electrolysis, has attracted extensive interest in the past decades. Carbon‐based materials with significant merits such as abundance, low cost, high conductivity, and tunable molecular structures, are considered as promising candidates for replacing the commercial noble metal electrocatalysts. To date, activity origins of these carbon‐based electrocatalysts are mainly attributed to the dopants (e.g., N, B, P or S), whereas the contribution of intrinsic/induced carbon defects has recently been a hot research topic. In this Review, besides the development of heteroatoms doping strategies, the latest studies on defective carbon‐based materials for HER electrocatalysis are summarized, especially for various approaches to prepare defective carbons and the detailed introduction regarding the defect catalysis mechanism. Finally, an outlook into the development of future defective carbon‐based HER electrocatalysts is presented.     

Oxidized Laser‐Induced Graphene for Efficient Oxygen Electrocatalysis

An efficient metal‐free catalyst is presented for oxygen evolution and reduction based on oxidized laser‐induced graphene (LIG‐O). The oxidation of LIG by O₂ plasma to form LIG‐O boosts its performance in the oxygen evolution reaction (OER), exhibiting a low onset potential of 260 mV with a low Tafel slope of 49 mV dec^?1, as well as an increased activity for the oxygen reduction reaction. Additionally, LIG‐O shows unexpectedly high activity in catalyzing Li₂O₂ decomposition in Li‐O₂ batteries. The overpotential upon charging is decreased from 1.01 V in LIG to 0.63 V in LIG‐O. The oxygen‐containing groups make essential contributions, not only by providing the active sites, but also by facilitating the adsorption of OER intermediates and lowering the activation energy.     

Surface Oxidation of AuNi Heterodimers to Achieve High Activities toward Hydrogen/Oxygen Evolution and Oxygen Reduction Reactions

Although much attention has been paid to the exploration of highly active electrocatalysts, especially catalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), the development of multifunctional catalysts remains a challenge. Here, we utilize AuNi heterodimers as the starting materials to achieve high activities toward HER, OER and ORR. The HER and ORR activities in an alkali environment are similar to those of Pt catalysts, and the OER activity is very high and better than that of commercial IrO₂. Both the experimental and calculated results suggest that the surface oxidation under oxidative conditions is the main reason for the different activities. The NiO/Ni interface which exists in the as‐synthesized heterodimers contributes to high HER activity, the Ni(OH)₂‐Ni‐Au interface and the surface Ni(OH)₂ obtained in electrochemical conditons gives rise to promising ORR and OER activities, respectively. As a comparison, a Au@Ni core‐shell structure is also synthesized and examined. The core‐shell structure shows lower activities for HER and OER than the heterodimers, and reduces O₂ selectively to H₂O₂. The work here allows for the development of a method to design multifunctional catalysts via the partial oxidation of a metal surface to create different active centers.     

Iridium‐Based Multimetallic Porous Hollow Nanocrystals for Efficient Overall‐Water‐Splitting Catalysis

The development of active and durable bifunctional electrocatalysts for overall water splitting is mandatory for renewable energy conversion. This study reports a general method for controllable synthesis of a class of IrM (M = Co, Ni, CoNi) multimetallic porous hollow nanocrystals (PHNCs), through etching Ir‐based, multimetallic, solid nanocrystals using Fe³⁺ ions, as catalysts for boosting overall water splitting. The Ir‐based multimetallic PHNCs show transition‐metal‐dependent bifunctional electrocatalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic electrolyte, with IrCo and IrCoNi PHNCs being the best for HER and OER, respectively. First‐principles calculations reveal a ligand effect, induced by alloying Ir with 3d transition metals, can weaken the adsorption energy of oxygen intermediates, which is the key to realizing much‐enhanced OER activity. The IrCoNi PHNCs are highly efficient in overall‐water‐splitting catalysis by showing a low cell voltage of only 1.56 V at a current density of 2 mA cm^?2, and only 8 mV of polarization‐curve shift after a 1000‐cycle durability test in 0.5 m H₂SO₄ solution. This work highlights a potentially powerful strategy toward the general synthesis of novel, multimetallic, PHNCs as highly active and durable bifunctional electrocatalysts for high‐performance electrochemical overall‐water‐splitting devices.     

Interfacial Engineering of Copper–Nickel Selenide Nanodendrites for Enhanced Overall Water Splitting in Alkali Condition (Small 33/2023)

Fabricating heterogeneous interfaces is an effective approach to improve the intrinsic activity of noble-metal-free catalysts for water splitting. Herein, 3D copper–nickel selenide (CuNi@NiSe) nanodendrites with abundant heterointerfaces are constructed by a precise multi-step wet chemistry method. Notably, CuNi@NiSe only needs 293 and 41 mV at 10 mA cm⁻² for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. Moreover, the assembled CuNi@NiSe system just requires 2.2 V at 1000 mA cm⁻² in anion exchange membrane (AEM) electrolyzer, which is 2.0 times better than Pt/C//IrO₂. Mechanism studies reveal Cu defects on the Cu_2−xSe surface boost the electron transfer between Cu atoms and Se atoms of Ni₃Se₄ via Cu_2−xSe/Ni₃Se₄ interface, largely lowering the reaction barrier of rate-determining step for HER. Besides, the intrinsic activity of Ni atoms for in situ generated NiOOH is largely enhanced during OER because of the electron-modulating effect of Se atoms at Ni₃Se₄/NiOOH interface. The unique 3D structure also promotes the mass transfer during catalysis process. This work emphasizes the essential role of interfacial engineering for practical water splitting.     

Nanoarchitectonics for Transition‐Metal‐Sulfide‐Based Electrocatalysts for Water Splitting

Heterogenous electrocatalysts based on transition metal sulfides (TMS) are being actively explored in renewable energy research because nanostructured forms support high intrinsic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, it is described how researchers are working to improve the performance of TMS‐based materials by manipulating their internal and external nanoarchitectures. A general introduction to the water‐splitting reaction is initially provided to explain the most important parameters in accessing the catalytic performance of nanomaterials catalysts. Later, the general synthetic methods used to prepare TMS‐based materials are explained in order to delve into the various strategies being used to achieve higher electrocatalytic performance in the HER. Complementary strategies can be used to increase the OER performance of TMS, resulting in bifunctional water‐splitting electrocatalysts for both the HER and the OER. Finally, the current challenges and future opportunities of TMS materials in the context of water splitting are summarized. The aim herein is to provide insights gathered in the process of studying TMS, and describe valuable guidelines for engineering other kinds of nanomaterial catalysts for energy conversion and storage technologies.     

In Situ Exfoliated,Edge‐Rich,Oxygen‐Functionalized Graphene from Carbon Fibers for Oxygen Electrocatalysis

Metal‐free electrocatalysts have been extensively developed to replace noble metal Pt and RuO₂ catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in fuel cells or metal–air batteries. These electrocatalysts are usually deposited on a 3D conductive support (e.g., carbon paper or carbon cloth (CC)) to facilitate mass and electron transport. For practical applications, it is desirable to create in situ catalysts on the carbon fiber support to simplify the fabrication process for catalytic electrodes. In this study, the first example of in situ exfoliated, edge‐rich, oxygen‐functionalized graphene on the surface of carbon fibers using Ar plasma treatment is successfully prepared. Compared to pristine CC, the plasma‐etched carbon cloth (P‐CC) has a higher specific surface area and an increased number of active sites for OER and ORR. P‐CC also displays good intrinsic electron conductivity and excellent mass transport. Theoretical studies show that P‐CC has a low overpotential that is comparable to Pt‐based catalysts, as a result of both defects and oxygen doping. This study provides a simple and effective approach for producing highly active in situ catalysts on a carbon support for OER and ORR.     

Mesoporous Polymeric Cyanamide‐Triazole‐Heptazine Photocatalysts for Highly‐Efficient Water Splitting

Conjugated polymers are promising light harvesters for water reduction/oxidation due to their simple synthesis and adjustable bandgap. Herein, both cyanamide and triazole functional groups are first incorporated into a heptazine‐based carbon nitride (CN) polymer, resulting in a mesoporous conjugated cyanamide‐triazole‐heptazine polymer (CTHP) with different compositions by increasing the quantity of cyanamide/triazole units in the CN backbone. Varying the compositions of CTHP modulates its electronic structures, mesoporous morphologies, and redox energies, resulting in a significantly improved photocatalytic performance for both H₂ and O₂ evolution under visible light irradiation. A remarkable H₂ evolution rate of 12723 µmol h^?1 g^?1 is observed, resulting in a high apparent quantum yield of 11.97% at 400 nm. In parallel, the optimized photocatalyst also exhibits an O₂ evolution rate of 221 µmol h^?1 g^?1, 9.6 times higher than the CN counterpart, with the value being the highest among the reported CN‐based bifunctional photocatalysts. This work provides an efficient molecular engineering approach for the rational design of functional polymeric photocatalysts.     

Synergism of Geometric Construction and Electronic Regulation: 3D Se‐(NiCo)Sx/(OH)x Nanosheets for Highly Efficient Overall Water Splitting

The exploration of highly efficient electrocatalysts for both oxygen and hydrogen generation via water splitting is receiving considerable attention in recent decades. Up till now, Pt‐based catalysts still exhibit the best hydrogen evolution reaction (HER) performance and Ir/Ru‐based oxides are identified as the benchmark for oxygen evolution reaction (OER). However, the high cost and rarity of these materials extremely hinder their large‐scale applications. This paper describes the construction of the ultrathin defect‐enriched 3D Se‐(NiCo)S_x/(OH)_x nanosheets for overall water splitting through a facile Se‐induced hydrothermal treatment. Via Se‐induced fabrication, highly efficient Se‐(NiCo)S_x/(OH)_x nanosheets are successfully fabricated through morphology optimization, defect engineering, and electronic structure tailoring. The as‐prepared hybrids exhibit relatively low overpotentials of 155 and 103 mV at the current density of 10 mA cm^?2 for OER and HER, respectively. Moreover, an overall water‐splitting device delivers a current density of 10 mA cm^?2 for ≈66 h without obvious degradation.