Interfaces in Perovskite Solar Cells

The interfacial atomic and electronic structures, charge transfer processes, and interface engineering in perovskite solar cells are discussed in this review. An effective heterojunction is found to exist at the window/perovskite absorber interface, contributing to the relatively fast extraction of free electrons. Moreover, the high photovoltage in this cell can be attributed to slow interfacial charge recombination due to the outstanding material and interfacial electronic properties. However, some fundamental questions including the interfacial atomic and electronic structures and the interface stability need to be further clarified. Designing and engineering the interfaces are also important for the next‐stage development of this cell.     

Integrated Perovskite/Bulk-Heterojunction Organic Solar Cells

The recently emerged integrated perovskite/bulk-heterojunction (BHJ) organic solar cells (IPOSCs) without any recombination layers have generated wide attention. This type of device structure can take the advantages of tandem cells using both perovskite solar and near-infrared (NIR) BHJ organic solar materials for wide-range sunlight absorption and the simple fabrication of single junction cells, as the low bandgap BHJ layer can provide additional light harvesting in the NIR region and the high open-circuit voltage can be maintained at the same time. This progress report highlights the recent developments in such IPOSCs and the possible challenges ahead. In addition, the recent development of perovskite solar cells and NIR organic solar cells is also covered to fully underline the importance and potential of IPOSCs.     

Organic Photovoltaics over Three Decades

The development of organic semiconductors for photovoltaic devices, over the last three decades, has led to unexpected performance for an alternative choice of materials to convert sunlight to electricity. New materials and developed concepts have improved the photovoltage in organic photovoltaic devices, where records are now found above 13% power conversion efficiency in sunlight. The author has stayed with the topic of organic materials for energy conversion and energy storage during these three decades, and makes use of the Hall of Fame now built by Advanced Materials, to present his view of the path travelled over this time, including motivations, personalities, and ambitions.     

Interfacial Modification in Organic and Perovskite Solar Cells

Organic bulk heterojunction solar cells (OSCs) and hybrid halide perovskite solar cells (PSCs) are two promising photovoltaic techniques for next‐generation energy conversion devices. The rapid increase in the power conversion efficiency (PCE) in OSCs and PSCs has profited from synergetic progresses in rational material synthesis for photoactive layers, device processing, and interface engineering. Interface properties in these two types of devices play a critical role in dictating the processes of charge extraction, surface trap passivation, and interfacial recombination. Therefore, there have been great efforts directed to improving the solar cell performance and device stability in terms of interface modification. Here, recent progress in interfacial doping with biopolymers and ionic salts to modulate the cathode interface properties in OSCs is reviewed. For the anode interface modification, recent strategies of improving the surface properties in widely used PEDOT:PSS for narrowband OSCs or replacing it by novel organic conjugated materials will be touched upon. Several recent approaches are also in focus to deal with interfacial traps and surface passivation in emerging PSCs. Finally, the current challenges and possible directions for the efforts toward further boosts of PCEs and stability via interface engineering are discussed.     

Extending the Photovoltaic Response of Perovskite Solar Cells into the Near‐Infrared with a Narrow‐Bandgap Organic Semiconductor

Typical lead‐based perovskites solar cells show an onset of photogeneration around 800 nm, leaving plenty of spectral loss in the near‐infrared (NIR). Extending light absorption beyond 800 nm into the NIR should increase photocurrent generation and further improve photovoltaic efficiency of perovskite solar cells (PSCs). Here, a simple and facile approach is reported to incorporate a NIR‐chromophore that is also a Lewis‐base into perovskite absorbers to broaden their photoresponse and increase their photovoltaic efficiency. Compared with pristine PSCs without such an organic chromophore, these solar cells generate photocurrent in the NIR beyond the band edge of the perovskite active layer alone. Given the Lewis‐basic nature of the organic semiconductor, its addition to the photoactive layer also effectively passivates perovskite defects. These films thus exhibit significantly reduced trap densities, enhanced hole and electron mobilities, and suppressed illumination‐induced ion migration. As a consequence, perovskite solar cells with organic chromophore exhibit an enhanced efficiency of 21.6%, and substantively improved operational stability under continuous one‐sun illumination. The results demonstrate the potential generalizability of directly incorporating a multifunctional organic semiconductor that both extends light absorption and passivates surface traps in perovskite active layers to yield highly efficient and stable NIR‐harvesting PSCs.     

Superfast Room‐Temperature Activation of SnO2 Thin Films via Atmospheric Plasma Oxidation and their Application in Planar Perovskite Photovoltaics

The power conversion efficiency (PCE) of perovskite solar cells (PSCs) has now exceeded 20%; thus, research focus has shifted to establishing the foundations for commercialization. One of the pivotal themes is to curtail the overall fabrication time, to reduce unit cost, and mass‐produce PSCs. Additionally, energy dissipation during the thermal annealing (TA) stage must be minimized by realizing a genuine low‐temperature (LT) process. Here, tin oxide (SnO₂) thin films (TFs) are formulated at extremely high speed, within 5 min, under an almost room‐temperature environment (<50 °C), using atmospheric Ar/O₂ plasma energy (P‐SnO₂) and are applied as an electron transport layer of a “n–i–p”‐type planar PSC. Compared with a thermally annealed SnO₂ TF (T‐SnO₂), the P‐SnO₂ TF yields a more even surface but also outstanding electrical conductivity with higher electron mobility and a lower number of charge trap sites, consequently achieving a superior PCE of 19.56% in P‐SnO₂‐based PSCs. These findings motivate the use of a plasma strategy to fabricate various metal oxide TFs using the sol–gel route.     

On the Current–Voltage Hysteresis in Perovskite Solar Cells: Dependence on Perovskite Composition and Methods to Remove Hysteresis

Current‐density–voltage (J–V) hysteresis in perovskite solar cells (PSCs) is a critical issue because it is related to power conversion efficiency and stability. Although parameters affecting the hysteresis have been already reported and reviewed, little investigation is reported on scan‐direction‐dependent J–V curves depending on perovskite composition. This review investigates J–V hysteric behaviors depending on perovskite composition in normal mesoscopic and planar structure. In addition, methodologies toward hysteresis‐free PSCs are proposed. There is a specific trend in hysteresis in terms of J–V curve shape depending on composition. Ion migration combined with nonradiative recombination near interfaces plays a critical role in generating hysteresis. Interfacial engineering is found to be an effective method to reduce the hysteresis; however, bulk defect engineering is the most promising method to remove the hysteresis. Among the studied methods, KI doping is proved to be a universal approach toward hysteresis‐free PSCs regardless of perovskite composition. It is proposed from the current studies that engineering of perovskite film near the electron transporting layer (ETL) and the hole transporting layer (HTL) is of vital importance for achieving hysteresis‐free PSCs and extremely high efficiency.     

Hybrid PbS Quantum‐Dot‐in‐Perovskite for High‐Efficiency Perovskite Solar Cell

In this study, a facile and effective approach to synthesize high‐quality perovskite‐quantum dots (QDs) hybrid film is demonstrated, which dramatically improves the photovoltaic performance of a perovskite solar cell (PSC). Adding PbS QDs into CH₃NH₃PbI₃ (MAPbI₃) precursor to form a QD‐in‐perovskite structure is found to be beneficial for the crystallization of perovskite, revealed by enlarged grain size, reduced fragmentized grains, enhanced characteristic peak intensity, and large percentage of (220) plane in X‐ray diffraction patterns. The hybrid film also shows higher carrier mobility, as evidenced by Hall Effect measurement. By taking all these advantages, the PSC based on MAPbI₃‐PbS hybrid film leads to an improvement in power conversion efficiency by 14% compared to that based on pure perovskite, primarily ascribed to higher current density and fill factor (FF). Ultimately, an efficiency reaching up to 18.6% and a FF of over ≈0.77 are achieved based on the PSC with hybrid film. Such a simple hybridizing technique opens up a promising method to improve the performance of PSCs, and has strong potential to be applied to prepare other hybrid composite materials.     

Self‐Assembly of Perovskite for Fabrication of Semitransparent Perovskite Solar Cells

This work reports on the preparation of semitransparent perovskite solar cells. The cells transparency is achieved through a unique wet deposition technique that creates perovskite grids with various dimensions. The perovskite grid is deposited on a mesoporous TiO₂ layer, followed by hole transport material deposition and evaporation of a semitransparent gold film. Control of the transparency of the solar cells is achieved by changing the perovskite solution concentration and the mesh openings. The semitransparent cells demonstrate 20–70% transparency with a power conversion efficiency of 5% at 20% transparency. This is the first demonstration of the possibility to create a controlled perovskite pattern using a direct mesh‐assisted assembly deposition method for fabrication of a semitransparent perovskite‐based solar cell.     

Defect‐Engineering‐Enabled High‐Efficiency All‐Inorganic Perovskite Solar Cells

The emergence of cesium lead iodide (CsPbI₃) perovskite solar cells (PSCs) has generated enormous interest in the photovoltaic research community. However, in general they exhibit low power conversion efficiencies (PCEs) because of the existence of defects. A new all‐inorganic perovskite material, CsPbI₃:Br:InI₃, is prepared by defect engineering of CsPbI₃. This new perovskite retains the same bandgap as CsPbI₃, while the intrinsic defect concentration is largely suppressed. Moreover, it can be prepared in an extremely high humidity atmosphere and thus a glovebox is not required. By completely eliminating the labile and expensive components in traditional PSCs, the all‐inorganic PSCs based on CsPbI₃:Br:InI₃ and carbon electrode exhibit PCE and open‐circuit voltage as high as 12.04% and 1.20 V, respectively. More importantly, they demonstrate excellent stability in air for more than two months, while those based on CsPbI₃ can survive only a few days in air. The progress reported represents a major leap for all‐inorganic PSCs and paves the way for their further exploration in order to achieve higher performance.     

Rational Tuning of Molecular Interaction and Energy Level Alignment Enables High‐Performance Organic Photovoltaics

The performance of organic photovoltaics (OPVs) has rapidly improved over the past years. Recent work in material design has primarily focused on developing near‐infrared nonfullerene acceptors with broadening absorption that pair with commercialized donor polymers; in the meanwhile, the influence of the morphology of the blend film and the energy level alignment on the efficiency of charge separation needs to be synthetically considered. Herein, the selection rule of the donor/acceptor blend is demonstrated by rationally considering the molecular interaction and energy level alignment, and highly efficient OPV devices using both‐fluorinated or both‐nonfluorinated donor/acceptor blends are realized. With the enlarged absorption, ideal morphology, and efficient charge transfer, the devices based on the PBDB‐T‐F/Y1‐4F blend and PBDB‐T‐F/Y6 exhibit champion power conversion efficiencies as high as 14.8% and 15.9%, respectively.