Efficient Semitransparent Organic Solar Cells with Tunable Color enabled by an Ultralow‐Bandgap Nonfullerene Acceptor

Semitransparent organic solar cells (OSCs) show attractive potential in power‐generating windows. However, the development of semitransparent OSCs is lagging behind opaque OSCs. Here, an ultralow‐bandgap nonfullerene acceptor, “IEICO‐4Cl”, is designed and synthesized, whose absorption spectrum is mainly located in the near‐infrared region. When IEICO‐4Cl is blended with different polymer donors (J52, PBDB‐T, and PTB7‐Th), the colors of the blend films can be tuned from purple to blue to cyan, respectively. Traditional OSCs with a nontransparent Al electrode fabricated by J52:IEICO‐4Cl, PBDB‐T:IEICO‐4Cl, and PTB7‐Th:IEICO‐4Cl yield power conversion efficiencies (PCE) of 9.65 ± 0.33%, 9.43 ± 0.13%, and 10.0 ± 0.2%, respectively. By using 15 nm Au as the electrode, semitransparent OSCs based on these three blends also show PCEs of 6.37%, 6.24%, and 6.97% with high average visible transmittance (AVT) of 35.1%, 35.7%, and 33.5%, respectively. Furthermore, via changing the thickness of Au in the OSCs, the relationship between the transmittance and efficiency is studied in detail, and an impressive PCE of 8.38% with an AVT of 25.7% is obtained, which is an outstanding value in the semitransparent OSCs.     

Highly Efficient Semitransparent Organic Solar Cells with Color Rendering Index Approaching 100

Neutral‐colored semitransparent organic solar cells (ST‐OSCs) have attracted considerable attention owing to their unique application in no‐visual‐obstacle building‐integrated photovoltaics. Toward this promising potential application, a synergistic effect is first proposed by employing a dielectric mirror and ternary photoactive layer with near‐infrared absorption to tune the color perception as well as ST‐OSC performance precisely. As a result, a neutral‐color ST‐OSC with high average transmittance of over 21% is successfully constructed, and a remarkable color‐rendering index approaching 100 and high power conversion efficiency (PCE) of 9.37% are simultaneously achieved. To the best of our knowledge, this is the highest PCE reported for neutral‐color ST‐OSCs to date. Importantly, this synergistic effect is demonstrated to be a universal strategy that is not only suitable for various photoactive layer systems, but can also be implanted in flexible substrate. The resulting neutral‐color flexible ST‐OSCs also show a promising PCE of 8.76%.     

Design Principles and Synergistic Effects of Chlorination on a Conjugated Backbone for Efficient Organic Photovoltaics: A Critical Review

The pursuit of low-cost, flexible, and lightweight renewable power resources has led to outstanding advancements in organic solar cells (OSCs). Among the successful design principles developed for synthesizing efficient conjugated electron donor (ED) or acceptor (EA) units for OSCs, chlorination has recently emerged as a reliable approach, despite being neglected over the years. In fact, several recent studies have indicated that chlorination is more potent for large-scale production than the highly studied fluorination in several aspects, such as easy and low-cost synthesis of materials, lowering energy levels, easy tuning of molecular orientation, and morphology, thus realizing impressive power conversion efficiencies in OSCs up to 17%. Herein, an up-to-date summary of the current progress in photovoltaic results realized by incorporating a chlorinated ED or EA into OSCs is presented to recognize the benefits and drawbacks of this interesting substituent in photoactive materials. Furthermore, other aspects of chlorinated materials for application in all-small-molecule, semitransparent, tandem, ternary, single-component, and indoor OSCs are also presented. Consequently, a concise outlook is provided for future design and development of chlorinated ED or EA units, which will facilitate utilization of this approach to achieve the goal of low-cost and large-area OSCs.     

High-Performance Semitransparent Organic Solar Cells with Excellent Infrared Reflection and See-Through Functions

Clean energy production and saving play vital impacts on the sustainability of the global community. Herein, high-performance semitransparent organic solar cells (ST-OSCs) with excellent features of power generation, being see-through, and infrared reflection of heat dissipation, with promising perspectives for building-integrated photovoltaics (BIPVs) are reported. To simultaneously improve average visible transmittance (AVT) and power conversion efficiency (PCE), formally in a trade-off relationship, of ST-OSCs, new ternary blends with alloy-like near-infrared (NIR) acceptors are employed, which are effective to improve device efficiency while maintaining visible absorption unchanged, resulting in PCEs of 16.8% for opaque devices and 13.1% for semitransparent OSCs (AVT of 22.4% and infrared photon radiation rejection (IRR) of 77%). Further, multifunctional ST-OSCs are realized via introducing simple, yet effective photonic reflectors, together with optical simulation, leading to not only perfect fitting of the visible transmittance peak (555 nm) to the photopic response of the human eye but also an excellent IRR of 90% (780–2500 nm), along with 23% AVT and over 12% PCE. This is thought to be the best-performing multifunctional ST-OSC with promising prospects as BIPVs in terms of power generation, heat dissipation, and being see-through.     

16.67% Rigid and 14.06% Flexible Organic Solar Cells Enabled by Ternary Heterojunction Strategy

Ternary heterojunction strategies appear to be an efficient approach to improve the efficiency of organic solar cells (OSCs) through harvesting more sunlight. Ternary OSCs are fabricated by employing wide bandgap polymer donor (PM6), narrow bandgap nonfullerene acceptor (Y6), and PC₇₁BM as the third component to tune the light absorption and morphologies of the blend films. A record power conversion efficiency (PCE) of 16.67% (certified as 16.0%) on rigid substrate is achieved in an optimized PM6:Y6:PC₇₁BM blend ratio of 1:1:0.2. The introduction of PC₇₁BM endows the blend with enhanced absorption in the range of 300–500 nm and optimises interpenetrating morphologies to promote photogenerated charge dissociation and extraction. More importantly, a PCE of 14.06% for flexible ITO‐free ternary OSCs is obtained based on this ternary heterojunction system, which is the highest PCE reported for flexible state‐of‐the‐art OSCs. A very promising ternary heterojunction strategy to develop highly efficient rigid and flexible OSCs is presented.     

A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency

Organic solar cells (OSCs) can be unstable under ultraviolet (UV) irradiation. To address this issue and enhance the power conversion efficiency (PCE), an inorganic‐perovskite/organic four‐terminal tandem solar cell (TSC) based on a semitransparent inorganic CsPbBr₃ perovskite solar cell (pero‐SC) as the top cell and an OSC as bottom cell is constructed. The high‐quality CsPbBr₃ photoactive layer of the planar pero‐SC is prepared with a dual‐source vacuum coevaporation method, using stoichiometric precursors of CsBr and PbBr₂ with a low evaporation rate. The resultant opaque planar pero‐SC exhibits an ultrahigh open‐circuit voltage of 1.44 V and the highest reported PCE of 7.78% for a CsPbBr₃‐based planar pero‐SC. Importantly, the devices show no degradation after 120 h UV light illumination. The related semitransparent pero‐SC can almost completely filter UV light and well maintain photovoltaic performance; it additionally shows an extremely high average visible transmittance. When it is used to construct a TSC, the top pero‐SC acting as a UV filter can utilize UV light for photoelectric conversion, avoiding the instability problem of UV light on the bottom OSC that can meet the industrial standards of UV‐light stability for solar cells, and leading to the highest reported PCE of 14.03% for the inorganic‐perovskite/organic TSC.     

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors

A ternary structure has been demonstrated as being an effective strategy to realize high power conversion efficiency (PCE) in organic solar cells (OSCs); however, general materials selection rules still remain incompletely understood. In this work, two nonfullerene small‐molecule acceptors 3TP3T‐4F and 3TP3T‐IC are synthesized and incorporated as a third component in PM6:Y6 binary blends. The photovoltaic behaviors in the resultant ternary OSCs differ significantly, despite the comparable energy levels. It is found that incorporation of 15% 3TP3T‐4F into the PM6:Y6 blend results in facilitating exciton dissociation, increasing charge transport, and reducing trap‐assisted recombination. All these features are responsible for the enlarged PCE of 16.7% (certified as 16.2%) in the PM6:Y6:3TP3T‐4F ternary OSCs, higher than that (15.6%) in the 3TP3T‐IC containing ternary devices. The performance differences are mainly ascribed to the compatibility between the third component and the host materials. The 3TP3T‐4F guest acceptor exhibits an excellent compatibility with Y6, tending to form well‐mixed phases in the ternary blend without disrupting the favored bicontinuous transport networks, whereas 3TP3T‐IC displays a morphological incompatibility with Y6. This work highlights the importance of considering the compatibility for materials selection toward high‐efficiency ternary organic OSCs.     

Large‐Area Organic Solar Cells: Material Requirements,Modular Designs,and Printing Methods

The printing of large‐area organic solar cells (OSCs) has become a frontier for organic electronics and is also regarded as a critical step in their industrial applications. With the rapid progress in the field of OSCs, the highest power conversion efficiency (PCE) for small‐area devices is approaching 15%, whereas the PCE for large‐area devices has also surpassed 10% in a single cell with an area of ≈1 cm². Here, the progress of this fast developing area is reviewed, mainly focusing on: 1) material requirements (materials that are able to form efficient thick active layer films for large‐area printing); 2) modular designs (effective designs that can suppress electrical, geometric, optical, and additional losses, leading to a reduction in the PCE of the devices, as a consequence of substrate area expansion); and 3) printing methods (various scalable fabrication techniques that are employed for large‐area fabrication, including knife coating, slot‐die coating, screen printing, inkjet printing, gravure printing, flexographic printing, pad printing, and brush coating). By combining thick‐film material systems with efficient modular designs exhibiting low‐efficiency losses and employing the right printing methods, the fabrication of large‐area OSCs will be successfully realized in the near future.     

Interfacial Modification in Organic and Perovskite Solar Cells

Organic bulk heterojunction solar cells (OSCs) and hybrid halide perovskite solar cells (PSCs) are two promising photovoltaic techniques for next‐generation energy conversion devices. The rapid increase in the power conversion efficiency (PCE) in OSCs and PSCs has profited from synergetic progresses in rational material synthesis for photoactive layers, device processing, and interface engineering. Interface properties in these two types of devices play a critical role in dictating the processes of charge extraction, surface trap passivation, and interfacial recombination. Therefore, there have been great efforts directed to improving the solar cell performance and device stability in terms of interface modification. Here, recent progress in interfacial doping with biopolymers and ionic salts to modulate the cathode interface properties in OSCs is reviewed. For the anode interface modification, recent strategies of improving the surface properties in widely used PEDOT:PSS for narrowband OSCs or replacing it by novel organic conjugated materials will be touched upon. Several recent approaches are also in focus to deal with interfacial traps and surface passivation in emerging PSCs. Finally, the current challenges and possible directions for the efforts toward further boosts of PCEs and stability via interface engineering are discussed.     

Chlorinated Narrow Bandgap Polymer Suppresses Non-Radiative Recombination Energy Loss Enabling Perylene Diimides-Based Organic Solar Cells Exceeding 10% Efficiency

The scarcity of narrow bandgap donor polymers matched with perylene diimides (PDI)-based nonfullerene acceptors (NFAs) hinders improvement of the power conversion efficiency (PCE) value of organic solar cells (OSCs). Here, it is reported that a narrow bandgap donor polymer PDX, the chlorinated derivative of the famous polymer donor PTB7-Th, blended with PDI-based NFA boosts the PCE value exceeding 10%. The electroluminescent quantum efficiency of PDX-based OSCs is two orders of magnitude higher than that of PTB7-Th-based OSCs;therefore, the nonradiative energy loss is 0.103 eV lower. This is the highest PCE value for OSCs with the lowest energy loss using the blend of PTB7-Th derivatives and PDI-based NFAs as the active layer. Besides, PDX-based devices showed larger phase separation, faster charge mobilities, higher exciton dissociation probability, suppressed charge recombination, elevated charge transfer state, and decreased energetic disorder compared with the PTB7-Th-based OSCs. All these factors contribute to the simultaneously improved short circuit current density, open circuit voltage, and fill factor, thus significantly improving PCE. These results prove that chlorinated conjugated side thienyl groups can efficiently suppress the non-radiative energy loss and highlight the importance of fine-modifying or developing novel narrow bandgap polymers to further elevate the PCE value of PDI-based OSCs.     

Tailoring and Modifying an Organic Electron Acceptor toward the Cathode Interlayer for Highly Efficient Organic Solar Cells

With the rapid advance of organic photovoltaic materials, the energy level structure, active layer morphology, and fabrication procedure of organic solar cells (OSCs) are changed significantly. Thus, the photoelectronic properties of many traditional electrode interlayers have become unsuitable for modifying new active layers; this limits the further enhancement in OSC efficiencies. Herein, a new design strategy of tailoring the end-capping unit, ITIC, to develop a cathode interlayer (CIL) material for achieving high power conversion efficiency (PCE) in OSCs is demonstrated. The excellent electron accepting capacity, suitable energy level, and good film-forming ability endow the S-3 molecule with an outstanding electron extraction property. A device with S-3 shows a PCE of 16.6%, which is among the top values in the field of OSCs. More importantly, it is demonstrated that the electrostatic potential difference between the CIL molecule and the polymer donor plays a crucial role in promoting exciton dissociation at the CIL/active layer interface, contributing to additional charge generation; this is crucial for enhancement of the current density. The results of this work not only develop a new design strategy for high-performance CIL, but also demonstrate a reliable approach of density functional theory (DFT) calculation to predict the effect of the CIL chemical structure on exciton dissociation in OSCs.     

Environmentally Friendly Solvent‐Processed Organic Solar Cells that are Highly Efficient and Adaptable for the Blade‐Coating Method

The power conversion efficiencies (PCEs) of state‐of‐the‐art organic solar cells (OSCs) have increased to over 13%. However, the most commonly used solvents for making the solutions of photoactive materials and the coating methods used in laboratories are not adaptable for future practical production. Therefore, taking a solution‐coating method with environmentally friendly processing solvents into consideration is critical for the practical utilization of OSC technology. In this study, a highly efficient PBTA‐TF:IT‐M‐based device processed with environmentally friendly solvents, tetrahydrofuran/isopropyl alcohol (THF/IPA) and o‐xylene/1‐phenylnaphthalene, is fabricated; a high PCE of 13.1% can be achieved by adopting the spin‐coating method, which is the top result for OSCs. More importantly, a blade‐coated non‐fullerene OSC processed with THF/IPA is demonstrated for the first time to obtain a promising PCE of 11.7%; even for the THF/IPA‐processed large‐area device (1.0 cm²) made by blade‐coating, a PCE of 10.6% can still be maintained. These results are critical for the large‐scale production of highly efficient OSCs in future studies.     

Horizontal‐, Vertical‐, and Cross‐Conjugated Small Molecules: Conjugated Pathway‐Performance Correlations along Operation Mechanisms in Ternary Non‐Fullerene Organic Solar Cells

A family of the SM‐axis series based on benzo[1,?2‐?b:4,?5‐?b′]?dithiophene and 3‐ethylrhodanine (RD) units with structurally different π‐conjugation systems are synthesized as a means to understand the structure–property relationship of conjugated pathways in ternary non‐fullerene organic solar cells (NF‐OSCs) as a third component. The optical and electrochemical properties of the SM‐axis are highly sensitive both to the functionalized direction and to the number of RD groups. Enhanced power conversion efficiencies (PCEs) of over 11% in ternary devices are obtained by incorporating optimal SM‐X and SM‐Y contents from PBDB‐T:ITIC binary NF‐OSCs, while a slightly lower PCE is observed with the addition of SM‐XY. The results of in‐depth studies using various characterization techniques demonstrate that working mechanisms of SM‐axis‐based ternary NF‐OSCs are distinctly different from one another: an energy‐transfer mechanism with an alloy‐like model for SM‐X, a charge transfer with the same model for SM‐Y, and an energy transfer without such a structure for SM‐XY. As extension of the scope, a SM‐X‐based ternary NF‐OSC in the PM6:IT4F system also shows a greatly enhanced PCE of over 13%. The findings provide insights into the effects of conjugated pathways of organic semiconductors on mechanisms of ternary NF‐OSCs, advancing the understanding for synthetic chemists, materials engineers, and device physicists.     

三维表面活性剂-石墨烯复合阴极界面材料在有机太阳能电池中的应用

低沸点绿色溶剂中分散石墨烯可广泛应用于涂料、导电油墨、电池、电子产品和太阳能电池等领域.研究发现,在乙醇溶液中,两种三维阴极界面材料POSSFN和ADMAFN分散石墨烯的浓度可达到0.97–1.18 mg mL^-1,通过计算得知这两种材料在石墨烯表面具有较大的吸附能.通过ESR、Raman、SKPM和XPS等测试手段...     

Self-assembly enables simple structure organic photovoltaics via green-solvent and open-air-printing: Closing the lab-to-fab gap

The ultimate goal of organic solar cells (OSCs) is to deliver cheap, stable, efficient, scalable, and eco-friendly solar-to-power products contributing to the global carbon neutral. However, simultaneously balancing these five critical factors of OSCs toward commercialization is extremely challenging. Herein, a green-solvent-processable and open-air-printable self-assembly strategy is demonstrated to synchronously simplify the device architecture, improve the power conversion efficiency (PCE) and enhance the shelf, thermal as well as light illumination stability of OSCs. The cathode interlayer (CIL)-free self-assembled OSCs exhibit the PCE of 15.5%, higher than that of traditional inverted OSCs of 13.0%, which is among the top values for both CIL-free self-assembled OSCs and open-air blade-coated bulk-heterojunction OSCs. The remarkable enhancements are mainly ascribed to the finely self-assembly, subtly controlled donor/acceptor aggregation rate, and delicately manipulated vertical morphology. Besides, this strategy enables 13.2% efficiency on device area of 0.98 cm², implying its potential for scalability. These findings demonstrate that this strategy can close the lab-to-fab gap of OSCs toward commercialized cheap, stable, efficient, scalable, and eco-friendly OSCs.     

Emerging Semitransparent Solar Cells: Materials and Device Design

Semitransparent solar cells can provide not only efficient power‐generation but also appealing images and show promising applications in building integrated photovoltaics, wearable electronics, photovoltaic vehicles and so forth in the future. Such devices have been successfully realized by incorporating transparent electrodes in new generation low‐cost solar cells, including organic solar cells (OSCs), dye‐sensitized solar cells (DSCs) and organometal halide perovskite solar cells (PSCs). In this review, the advances in the preparation of semitransparent OSCs, DSCs, and PSCs are summarized, focusing on the top transparent electrode materials and device designs, which are all crucial to the performance of these devices. Techniques for optimizing the efficiency, color and transparency of the devices are addressed in detail. Finally, a summary of the research field and an outlook into the future development in this area are provided.     

Halogen-Free Donor Polymers Based on Dicyanobenzotriazole with Low Energy Loss and High Efficiency in Organic Solar Cells

Halogenation of organic semiconductors is an efficient strategy for improving the performance of organic solar cells (OSCs), while the introduction of halogens usually involves complex synthetic process and serious environment pollution problems. Herein, three halogen-free ternary copolymer donors (PCNx, x = 3, 4, 5) based on electron-withdrawing dicyanobenzotriazole are reported. When blended with the Y6, PCN3 with strong interchain interactions results in appropriate crystallinity and thermodynamic miscibility of the blend film. Grazing-incidence wide-angle X-ray scattering measurements indicate that PCN3 has more ordered arrangement and stronger π–π stacking than previous PCN2. Fourier-transform photocurrent spectroscopy and external quantum efficiency of electroluminescence measurements show that PCN3-based OSCs have lower energy loss than PCN2, which leads to their higher open-circuit voltage (0.873 V). The device based on PCN3 reaches power conversion efficiency (PCE) of 15.33% in binary OSCs, one of the highest values for OSCs with halogen-free donor polymers. The PCE of 17.80% and 18.10% are obtained in PM6:PCN3:Y6 and PM6:PCN3:BTP-eC9 ternary devices, much higher than those of PM6:Y6 (16.31%) and PM6:BTP-eC9 (17.33%) devices. Additionally, this ternary OSCs exhibit superior stability compared to binary host system. This work gives a promising path for halogen-free donor polymers to achieve low energy loss and high PCE.     

Unraveling the Microstructure-Related Device Stability for Polymer Solar Cells Based on Nonfullerene Small-Molecular Acceptors

As the power conversion efficiency (PCE) of organic solar cells (OSCs) has surpassed the 17% baseline, the long-term stability of highly efficient OSCs is essential for the practical application of this photovoltaic technology. Here, the photostability and possible degradation mechanisms of three state-of-the-art polymer donors with a commonly used nonfullerene acceptor (NFA), IT-4F, are investigated. The active-layer materials show excellent intrinsic photostability. The initial morphology, in particular the mixed region, causes degradation predominantly in the fill factor (FF) under illumination. Electron traps are formed due to the reorganization of polymers and diffusion-limited aggregation of NFAs to assemble small isolated acceptor domains under illumination. These electron traps lead to losses mainly in FF, which is in contradistinction to the degradation mechanisms observed for fullerene-based OSCs. Control of the composition of NFAs close to the thermodynamic equilibrium limit while keeping adequate electron percolation and improving the initial polymer and NFA ordering are of the essence to stabilize the FF in NFA-based solar cells, which may be the key tactics to develop next-generation OSCs with high efficiency as well as excellent stability.     

Over 15.7% Efficiency of Ternary Organic Solar Cells by Employing Two Compatible Acceptors with Similar LUMO Levels

Efficient organic solar cells (OSCs) are fabricated using polymer PM6 as donor, and IPTBO‐4Cl and MF1 as acceptors. The power conversion efficiency (PCE) of IPTBO‐4Cl based and MF1 based binary OSCs individually arrive to 14.94% and 12.07%, exhibiting markedly different short circuit current density (J_SC) of 23.18 mA cm^?2 versus 17.01 mA cm^?2, fill factor (FF) of 72.17% versus 78.18% and similar open circuit voltage (V_OC) of 0.893 V versus 0.908 V. The two acceptors, IPTBO‐4Cl and MF1, have similar lowest unoccupied molecular orbital levels, which is beneficial for efficient electron transport in the ternary active layer. The PCE of optimized ternary OSCs arrives to 15.74% by incorporating 30 wt% MF1 in acceptors, resulting from the simultaneously increased J_SC of 23.20 mA cm^?2, V_OC of 0.897 V, and FF of 75.64% in comparison with IPTBO‐4Cl based binary OSCs. The gradually increased FFs of ternary OSCs indicate the well‐optimized phase separation and molecular arrangement with MF1 as morphology regulator. This work may provide a new viewpoint for selecting an appropriate third component to achieve efficient ternary OSCs from materials and photovoltaic parameters of two binary OSCs.     

A Self‐Organized Poly(vinylpyrrolidone)‐Based Cathode Interlayer in Inverted Fullerene‐Free Organic Solar Cells

Herein, poly(vinylpyrrolidone) (PVP) is used as the cathode interlayer (CIL) through the self‐organization method in inverted organic solar cells (OSCs). By coating a solution of PVP and active layer materials onto a glass/indium tin oxide (ITO) substrate, the PVP can segregate to the near ITO side due to its high surface energy and strong intermolecular interaction with the ITO electrode. The power conversion efficiency (PCE) of the obtained OSC device reaches 13.3%, much higher than that of the control device with a PCE of only 10.1%. The improvement results from the increased exciton dissociation efficiency and the depressed trap‐assisted recombination, which can be attributed to the reduced work function of the cathode by the self‐organized PVP. Additionally, the molecular weight of the PVP has almost no influence on the device performance, and the PVP‐modified device presents superior stability. This method can also be applied in other highly efficient fullerene‐free OSCs, and with a fine selection of the active layer, a high PCE of 14.0% is obtained. Overall, this work demonstrates the great potential of the PVP‐based CIL in inverted OSCs fabricated via the self‐organization method.