Electroreduction of Carbon Dioxide Driven by the Intrinsic Defects in the Carbon Plane of a Single Fe–N4 Site

Manipulating the in‐plane defects of metal–nitrogen–carbon catalysts to regulate the electroreduction reaction of CO₂ (CO₂RR) remains a challenging task. Here, it is demonstrated that the activity of the intrinsic carbon defects can be dramatically improved through coupling with single‐atom Fe–N₄ sites. The resulting catalyst delivers a maximum CO Faradaic efficiency of 90% and a CO partial current density of 33 mA cm^?2 in 0.1 m KHCO_3. The remarkable enhancements are maintained in concentrated electrolyte, endowing a rechargeable Zn–CO₂ battery with a high CO selectivity of 86.5% at 5 mA cm^?2. Further analysis suggests that the intrinsic defect is the active sites for CO₂RR, instead of the Fe–N₄ center. Density functional theory calculations reveal that the Fe–N₄ coupled intrinsic defect exhibits a reduced energy barrier for CO₂RR and suppresses the hydrogen evolution activity. The high intrinsic activity, coupled with fast electron‐transfer capability and abundant exposed active sites, induces excellent electrocatalytic performance.     

Geometric and Electronic Structural Engineering of Isolated Ni Single Atoms for a Highly Efficient CO2 Electroreduction

Tuning the coordination environment and geometric structures of single atom catalysts is an effective approach for regulating the reaction mechanism and maximize the catalytic efficiency of single-atom centers. Here, a template-based synthesis strategy is proposed for the synthesis of high-density NiN_x sites anchored on the surface of hierarchically porous nitrogen-doped carbon nanofibers (Ni-HPNCFs) with different coordination environments. First-principles calculations and advanced characterization techniques demonstrate that the single Ni atom is strongly coordinated with both pyrrolic and pyridinic N dopants, and that the predominant sites are stabilized by NiN₃ sites. This dual engineering strategy increases the number of active sites and utilization efficiency of each single atom as well as boosts the intrinsic activity of each active site on a single-atom scale. Notably, the Ni-HPNCF catalyst achieves a high CO Faradaic efficiency (FE_CO) of 97% at a potential of −0.7 V, a high CO partial current density (j_CO) of 49.6 mA cm⁻² (−1.0 V), and a remarkable turnover frequency of 24 900 h⁻¹ (−1.0 V) for CO₂ reduction reactions (CO₂RR). Density functional theory calculations show that compared to pyridinic-type NiN_x, the pyrrolic-type NiN₃ moieties display a superior CO₂RR activity over hydrogen evolution reactions, resulting in their superior catalytic activity and selectivity.     

A Bifunctional Highly Efficient FeNx/C Electrocatalyst

Herein, a type of Fe, N‐codoped carbon electrocatalyst (FeN_x/C, Fe‐N‐BCNT#BP) containing bamboo carbon nanotubes and displaying bifunctional high catalytic efficiency for both oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) is reported. It shows high electrocatalytic activity and stability for both the ORR process with onset potential of 1.03 V_RHE in alkaline and the CO2RR to CO with high faradic efficiency up to 90% and selectivity of about 100% at low overpotential of 0.49 V. For CO2RR to CO, it is revealed that Fe₃C is active but the activity of FeN_x centers is lower than that of C–N‐based centers, contrary with that observed for ORR. Due to its low cost and high electrocatalytic performance for these two reduction reactions, the obtained catalyst is very promising for extensive application in future. The revealed huge activity difference of the same types of active sites for different reactions can efficiently guide the synthesis of advanced materials with multifunction.     

Enhanced the Efficiency of Electrocatalytic CO2-to-CO Conversion by Cd Species Anchored into Metal-Organic Framework

Metal-organic frameworks (MOFs) as a promising platform for electrocatalytic CO₂ conversion are still restricted by the low efficiency or unsatisfied selectivity for desired products. Herein, zirconium-based porphyrinic MOF hollow nanotubes with Cd sites (Cd-PCN-222HTs) are reported for electrocatalytic CO₂-to-CO conversion. The dispersed Cd species are anchored in PCN-222HTs and coordinated by N atoms of porphyrin structures. It is discovered that Cd-PCN-222HTs have glorious electrocatalytic activity for selective CO production in ionic liquid-water (H₂O)-acetonitrile (MeCN) electrolyte. The CO Faradaic efficiency (FE_CO) of >80% could be maintained in a wide potential range from −2.0 to −2.4 V versus Ag/Ag⁺, and the maximum current density could reach 68.0 mA cm⁻² at −2.4 V versus Ag/Ag⁺ with a satisfied turnover frequency of 26 220 h⁻¹. The enhanced efficiency of electrocatalytic CO₂ conversion of Cd-PCN-222HTs is closely related to its hollow structure, anchored Cd species, and good synergistic effect with electrolyte. The density functional theory calculations indicate that the dispersed Cd sites anchored in PCN-222HTs not only favor the formation of *COOH intermediate but also hinder the hydrogen evolution reaction, resulting in high activity of electrocatalytic CO₂-to-CO conversion.     

Oxygen Doping Induced by Nitrogen Vacancies in Nb4N5 Enables Highly Selective CO2 Reduction

Surface vacancy engineering holds great promise for boosting the electrocatalytic activity for CO₂ reduction reaction; however, the vacancies are generally unstable and may degrade into the inactive phase during electrolysis. Stabilizing the vacancy‐enriched structure by heteroatoms can be an effective strategy to get a robust and active catalyst. Herein, a nitrogen‐vacancy enriched Nb₄N₅ on N‐doped carbons is constructed, which is thereafter stabilized by a self‐enhanced oxygen doping process. This oxygen‐doped complex is used as an effective CO₂ catalyst, which exhibits a maximum CO Faradaic efficiency of 91% at ?0.8 V (vs reversible hydrogen electrode, RHE) and long‐term stability throughout 30 h of electrocatalysis. Density function theory calculations suggest that the incorporation of oxygen in Nb₄N₅ facilitates the formation of *COOH and thus promotes the CO₂ reduction.     

Well‐Defined Single‐Atom Cobalt Catalyst for Electrocatalytic Flue Gas CO2 Reduction

Single‐atom Co catalyst Co‐Tpy‐C with well‐defined sites is synthesized by pyrolysis of a Co terpyridine (Tpy) organometallic complex. The Co‐Tpy‐C catalyst exhibits excellent activity for the electrochemical CO₂ reduction reaction in aqueous electrolyte, with CO faradaic efficiency (FE) of over 95% from ?0.7 to ?1.0 V (vs RHE). By comparison, catalysts without Co or Tpy ligand added do not show any high CO FE. When simulated flue gas with 15% of CO₂ is used as the source of CO₂, CO FE is kept at 90.1% at ?0.5 V versus RHE. During gas phase flow electrolysis using simulated flue gas, the CO partial current density is further increased to 86.4 mA cm^?2 and CO FE reached >90% at the cell voltage of 3.4 V. Experiments and density functional theory calculations indicate that uniform single‐atom Co–N₄ sites mainly contribute to the high activity for CO₂ reduction.     

Enhanced CO Affinity on Cu Facilitates CO2 Electroreduction toward Multi-Carbon Products

Electrochemical CO₂ reduction reaction (CO₂RR) is a promising strategy for waste CO₂ utilization and intermittent electricity storage. Herein, it is reported that bimetallic Cu/Pd catalysts with enhanced *CO affinity show a promoted CO₂RR performance for multi-carbon (C2+) production under industry-relevant high current density. Especially, bimetallic Cu/Pd-1% catalyst shows an outstanding CO₂-to-C2+ conversion with 66.2% in Faradaic efficiency (FE) and 463.2 mA cm⁻² in partial current density. An increment in the FE ratios of C2+ products to CO  for Cu/Pd-1% catalyst further illuminates a preferable C2+ production. In situ Raman spectra reveal that the atop-bounded CO is dominated by low-frequency band CO on Cu/Pd-1% that leads to C2+ products on bimetallic catalysts, in contrast to the majority of high-frequency band CO on Cu that favors the formation of CO. Density function theory calculation confirms that bimetallic Cu/Pd catalyst enhances the *CO adsorption and reduces the Gibbs free energy of the C C coupling process, thereby favoring the formation of C2+ products.     

Gas Diffusion Strategy for Inserting Atomic Iron Sites into Graphitized Carbon Supports for Unusually High-Efficient CO2 Electroreduction and High-Performance Zn–CO2 Batteries

Emerging single-atom catalysts (SACs) hold great promise for CO₂ electroreduction (CO₂ER)_, but the design of highly active and cost-efficient SACs is still challenging. Herein, a gas diffusion strategy, along with one-step thermal activation, for fabricating N-doped porous carbon polyhedrons with trace isolated Fe atoms (Fe₁NC) is developed. The optimized Fe₁NC/S₁-1000 with atomic Fe-N₃ sites supported by N-doped graphitic carbons exhibits superior CO₂ER performance with the CO Faradaic efficiency up to 96% at −0.5 V, turnover frequency of 2225 h⁻¹, and outstanding stability, outperforming almost all previously reported SACs based on N-doped carbon supported nonprecious metals. The observed excellent CO₂ER performance is attributed to the greatly enhanced accessibility and intrinsic activity of active centers due to the increased electrochemical surface area through size modulation and the redistribution of doped N species by thermal activation. Experimental observations and theoretical calculations reveal that the Fe-N₃ sites possess balanced adsorption energies of *COOH and *CO intermediates, facilitating CO formation. A universal gas diffusion strategy is used to exclusively yield a series of dimension-controlled carbon-supported SACs with single Fe atoms while a rechargeable Zn–CO₂ battery with Fe₁NC/S₁-1000 as cathode is developed to deliver a maximal power density of 0.6 mW cm⁻².     

Promoting Electrocatalytic CO2 Reduction to CH4 by Copper Porphyrin with Donor–Acceptor Structures

Molecular catalysts have been receiving increasingly attention in the electrochemical CO₂ reduction reaction (CO₂RR) with attractive features such as precise catalytic sites and tunable ligands. However, the insufficient activity and low selectivity of deep reduction products restrain the utilization of molecular catalysts in CO₂RR. Herein, a donor–acceptor modified Cu porphyrin (CuTAPP) is developed, in which amino groups are linked to donate electrons toward the central CuN₄ site to enhance the CO₂RR activity. The CuTAPP catalyst exhibited an excellent CO₂-to-CH₄ electroreduction performance, including a high CH₄ partial current density of 290.5 mA cm⁻² and a corresponding Faradaic efficiency of 54.8% at –1.63 V versus reversible hydrogen electrode in flow cells. Density functional theory calculations indicated that CuTAPP presented a much lower energy gap in the pathway of producing *CHO than Cu porphyrin without amino group modification. This work suggests a useful strategy of introducing designed donor–acceptor structures into molecular catalysts for enhancing electrochemical CO₂ conversion toward deep reduction products.     

Rational Design of FeNi Bimetal Modified Covalent Organic Frameworks for Photoconversion of Anthropogenic CO2 into Widely Tunable Syngas

Direct photoconversion of low‐concentration CO₂ into a widely tunable syngas (i.e., CO/H₂ mixture) provides a feasible outlet for the high value‐added utilization of anthropogenic CO₂. However, in the low‐concentration CO₂ photoreduction system, it remains a huge challenge to screen appropriate catalysts for efficient CO and H₂ production, respectively, and provide a facile parameter to tune the CO/H₂ ratio in a wide range. Herein, by engineering the metal sites on the covalent organic frameworks matrix, low‐concentration CO₂ can be efficiently photoconverted into tunable syngas, whose CO/H₂ ratio (1:19–9:1) is obviously wider than reported systems. Experiments and density functional theory calculations indicate that Fe sites serve as the H₂ evolution sites due to the much stronger binding affinity to H₂O, while Ni sites act as the CO production sites for the higher affinity to CO₂. Notably, the widely tunable syngas can also be produced over other Fe/Ni‐based bimetal catalysts, regardless of their structures and supporting materials, confirming the significant role of the metal sites in regulating the selectivity of CO₂ photoreduction and providing a modular design strategy for syngas production.     

Regulation of Electrocatalytic Behavior by Axial Oxygen Enhances the Catalytic Activity of CoN4 Sites for CO2 Reduction

Recent studies have found that the existence of oxygen around the active sites may be essential for efficient electrochemical CO₂-to-CO conversion. Hence, this work proposes the modulation of oxygen coordination and investigates the as-induced catalytic behavior in CO₂RR. It designs and synthesizes conjugated phthalocyanine frameworks catalysts (CPF-Co) with abundant CoN₄ centers as an active source, and subsequently modifies the electronic structure of CPF-Co by introducing graphene oxide (GO) with oxygen-rich functional groups. A systematic study reveals that the axial coordination between oxygen and the catalytic sites could form an optimized O-CoN₄ structure to break the electron distribution symmetry of Co, thus reducing the energy barrier to the activation of CO₂ to COOH*. Meanwhile, by adjusting the content of oxygen, the proper supports can also facilitate the charge transfer efficiency between the matrix layer and the catalytic sites. The optimized CPF-Co@LGO exhibits a high TOF value (2.81 s⁻¹), CO selectivity (97.6%) as well as stability (24 h) at 21 mA cm⁻² current density. This work reveals the modulation of oxygen during CO₂RR and provides a novel strategy for the design of efficient electrocatalysts, which may inspire new exploration and principles for CO₂RR.     

Interface-Induced Electrocatalytic Enhancement of CO2-to-Formate Conversion on Heterostructured Bismuth-Based Catalysts

Electrochemical CO₂ reduction reaction (CO₂RR) is a promising approach to convert CO₂ to carbon-neutral fuels using external electric powers. Here, the Bi₂S₃-Bi₂O₃ nanosheets possessing substantial interface being exposed between the connection of Bi₂S₃ and Bi₂O₃ are prepared and subsequently demonstrate to improve CO₂RR performance. The electrocatalyst shows formate Faradaic efficiency (FE) of over 90% in a wide potential window. A high partial current density of about 200 mA cm^?2 at ?1.1 V and an ultralow onset potential with formate FE of 90% are achieved in a flow cell. The excellent electrocatalytic activity is attributed to the fast-interfacial charge transfer induced by the electronic interaction at the interface, the increased number of active sites, and the improved CO₂ adsorption ability. These collectively contribute to the faster reaction kinetics and improved selectivity and consequently, guarantee the superb CO₂RR performance. This study provides an appealing strategy for the rational design of electrocatalysts to enhance catalytic performance by improving the charge transfer ability through constructing a functional heterostructure, which enables interface engineering toward more efficient CO₂RR.     

Highly Efficient Electroreduction of CO2 on Nickel Single‐Atom Catalysts: Atom Trapping and Nitrogen Anchoring

Construction of single atom catalysts (SACs) with high activity toward electroreduction of CO₂ still remains a great challenge. A very simple and truly cost‐effective synthetic strategy is proposed to prepare SACs via a impregnation–pyrolysis method, through one‐step pyrolysis of graphene oxide aerogel. Compared with other traditional methods, this process is fast and free of repeated acid etching, and thus it has great potential for facile operation and large‐scale manufacturing. Both X‐ray absorption fine structure and high‐angle annular dark‐field scanning transmission electron microscopy images confirm the presence of isolated nickel atoms, with a high Ni loading of ≈2.6 wt%. The obtained 3D porous Ni‐ and N‐codoped graphene aerogel exhibits excellent activity toward electroreduction of CO₂ to CO, in particular exhibiting a remarkable CO Faradaic efficiency of 90.2%. Density functional theory calculations reveal that free energies for the formation of intermediate *COOH on coordinatively unsaturated Ni? N sites are significantly lower than that on Ni? N₄ site, suggesting the outstanding activities of CO₂ electroreduction originate from coordinatively unsaturated Ni? N sites in catalysts.     

An Earth‐Abundant Catalyst‐Based Seawater Photoelectrolysis System with 17.9% Solar‐to‐Hydrogen Efficiency

The implementation of water splitting systems, powered by sustainable energy resources, appears to be an attractive strategy for producing high‐purity H₂ in the absence of the release of carbon dioxide (CO₂). However, the high cost, impractical operating conditions, and unsatisfactory efficiency and stability of conventional methods restrain their large‐scale development. Seawater covers 70% of the Earth's surface and is one of the most abundant natural resources on the planet. New research is looking into the possibility of using seawater to produce hydrogen through electrolysis and will provide remarkable insight into sustainable H₂ production, if successful. Here, guided by density functional theory (DFT) calculations to predict the selectivity of gas‐evolving catalysts, a seawater‐splitting device equipped with affordable state‐of‐the‐art electrocatalysts composed of earth‐abundant elements (Fe, Co, Ni, and Mo) is demonstrated. This device shows excellent durability and specific selectivity toward the oxygen evolution reaction in seawater with near 100% Faradaic efficiency for the production of H₂ and O₂. Powered by a single commercial III–V triple‐junction photovoltaic cell, the integrated system achieves spontaneous and efficient generation of high‐purity H₂ and O₂ from seawater at neutral pH with a remarkable 17.9% solar‐to‐hydrogen efficiency.     

Multilayer-Cavity Tandem Catalyst for Profiling Sequentially Coupling of Intermediate CO in Electrocatalytic Reduction Reaction of CO2 to Multi-Carbon Products

Electrochemical CO₂ reduction reaction (CO₂RR) is an effective approach to address CO₂ emission, promote recycling, and synthesize high-value multi-carbon (C₂₊) chemicals for storing renewable electricity in the long-term. The construction of multilayer-bound nanoreactors to achieve management of intermediate CO is a promising strategy for tandem to C₂₊ products. In this study, a series of Ag@Cu₂O nanoreactors consisting of an Ag-yolk and a multilayer confined Cu shell is designed to profile electrocatalytic CO₂RR reactions. The optimized Ag@Cu₂O-2 nanoreactor exhibits a 74% Faradaic efficiency during the C₂₊ pathway and remains stable for over 10 h at a bias current density of 100 mA cm⁻². Using the finite element method, this model determines that the certain volume of cavity in the Ag@Cu₂O nanoreactors facilitates on-site CO retention and that multilayers of Cu species favor CO capture. Density functional theory calculations illustrate that the biased generation of ethanol products may arise from the (100)/(111) interface of the Cu layer. In-depth explorations in multilayer-bound nanoreactors provide structural and interfacial guidance for sequential coupling of CO₂RR intermediates for efficient C₂₊ generation.     

Electrochemical CO2 Reduction into Chemical Feedstocks: From Mechanistic Electrocatalysis Models to System Design

The electrochemical reduction of CO₂ is a promising route to convert intermittent renewable energy to storable fuels and valuable chemical feedstocks. To scale this technology for industrial implementation, a deepened understanding of how the CO₂ reduction reaction (CO₂RR) proceeds will help converge on optimal operating parameters. Here, a techno‐economic analysis is presented with the goal of identifying maximally profitable products and the performance targets that must be met to ensure economic viability—metrics that include current density, Faradaic efficiency, energy efficiency, and stability. The latest computational understanding of the CO₂RR is discussed along with how this can contribute to the rational design of efficient, selective, and stable electrocatalysts. Catalyst materials are classified according to their selectivity for products of interest and their potential to achieve performance targets is assessed. The recent progress and opportunities in system design for CO₂ electroreduction are described. To conclude, the remaining technological challenges are highlighted, suggesting full‐cell energy efficiency as a guiding performance metric for industrial impact.     

Revealing the Kinetic Balance between Proton-Feeding and Hydrogenation in CO2 Electroreduction

Electrocatalytic reduction of CO₂ to high-value-added chemicals provides a feasible path for global carbon balance. Herein, the fabrication of Ni_NPx@Ni_SAy-NG (x,y = 1, 2, 3; NG = nitrogen-doped graphite) is reported, in which Ni single atom sites (Ni_SA) and Ni nanoparticles (Ni_NP) coexist. These Ni_NPx@Ni_SAy-NG presented a volcano-like trend for maximum CO Faradaic efficiency (FE_CO) with the highest point at Ni_NP2@Ni_SA2-NG in CO₂RR. Ni_NP2@Ni_SA2-NG exhibited ≈98% of maximum FE_CO and a large current density of −264 mA cm⁻² at −0.98 V (vs. RHE) in the flow cell. In situ experiment and density functional theory (DFT) calculations confirmed that the proper content of Ni_SA and Ni_NP balanced kinetic between proton-feeding and CO₂ hydrogenation. The Ni_NP in Ni_NP2@Ni_SA2-NG promoted the formation of H* and reduced the energy barrier of *CO₂ hydrogenation to *COOH, and CO desorption can be efficiently facilitated by Ni_SA sites, thereby resulting in enhanced CO₂RR performance.     

Boron Phosphide Nanoparticles: A Nonmetal Catalyst for High‐Selectivity Electrochemical Reduction of CO2 to CH3OH

Electrocatalysis has emerged as an attractive way for artificial CO₂ fixation to CH₃OH, but the design and development of metal‐free electrocatalyst for highly selective CH₃OH formation still remains a key challenge. Here, it is demonstrated that boron phosphide nanoparticles perform highly efficiently as a nonmetal electrocatalyst toward electrochemical reduction of CO₂ to CH₃OH with high selectivity. In 0.1 m KHCO₃, this catalyst achieves a high Faradaic efficiency of 92.0% for CH₃OH at ?0.5 V versus reversible hydrogen electrode. Density functional theory calculations reveal that B and P synergistically promote the binding and activation of CO₂, and the rate‐determining step for the CO₂ reduction reaction is dominated by *CO + *OH to *CO + *H₂O process with free energy change of 1.36 eV. In addition, CO and CH₂O products are difficultly generated on BP (111) surface, which is responsible for the high activity and selectivity of the CO₂‐to‐CH₃OH conversion process.     

Mesoporous PdAg Nanospheres for Stable Electrochemical CO2 Reduction to Formate

Palladium is a promising material for electrochemical CO₂ reduction to formate with high Faradaic efficiency near the equilibrium potential. It unfortunately suffers from problematic operation stability due to CO poisoning on surface. Here, it is demonstrated that alloying is an effective strategy to alleviate this problem. Mesoporous PdAg nanospheres with uniform size and composition are prepared from the co-reduction of palladium and silver precursors in aqueous solution using dioctadecyldimethylammonium chloride as the structure-directing agent. The best candidate can initiate CO₂ reduction at zero overpotential and achieve high formate selectivity close to 100% and great stability even at <-0.2 V versus reversible hydrogen electrode. The high selectivity and stability are believed to result from the electronic coupling between Pd and Ag, which lowers the d-band center of Pd and thereby significantly enhances its CO tolerance, as evidenced by both electrochemical analysis and theoretical simulations.     

Single-Site Metal–Organic Framework and Copper Foil Tandem Catalyst for Highly Selective CO2 Electroreduction to C2H4

Tandem catalysis is a promising way to break the limitation of linear scaling relationship for enhancing efficiency, and the desired tandem catalysts for electrochemical CO₂ reduction reaction (CO₂RR) are urgent to be developed. Here, a tandem electrocatalyst created by combining Cu foil (CF) with a single-site Cu(II) metal–organic framework (MOF), named as Cu–MOF–CF, to realize improved electrochemical CO₂RR performance, is reported. The Cu–MOF–CF shows suppression of CH₄, great increase in C₂H₄ selectivity (48.6%), and partial current density of C₂H₄ at −1.11 V versus reversible hydrogen electrode. The outstanding performance of Cu–MOF–CF for CO₂RR results from the improved microenvironment of the Cu active sites that inhibits CH₄ production, more CO intermediate produced by single-site Cu–MOF in situ for CF, and the enlarged active surface area by porous Cu–MOF. This work provides a strategy to combine MOFs with copper-based electrocatalysts to establish high-efficiency electrocatalytic CO₂RR.