Ultrathin Cobalt Oxide Layers as Electrocatalysts for High‐Performance Flexible Zn–Air Batteries

Synergistic improvements in the electrical conductivity and catalytic activity for the oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) are of paramount importance for rechargeable metal–air batteries. In this study, one‐nanometer‐scale ultrathin cobalt oxide (CoO_x) layers are fabricated on a conducting substrate (i.e., a metallic Co/N‐doped graphene substrate) to achieve superior bifunctional activity in both the ORR and OER and ultrahigh output power for flexible Zn–air batteries. Specifically, at the atomic scale, the ultrathin CoO_x layers effectively accelerate electron conduction and provide abundant active sites. X‐ray absorption spectroscopy reveals that the metallic Co/N‐doped graphene substrate contributes to electron transfer toward the ultrathin CoO_x layer, which is beneficial for the electrocatalytic process. The as‐obtained electrocatalyst exhibits ultrahigh electrochemical activity with a positive half‐wave potential of 0.896 V for ORR and a low overpotential of 370 mV at 10 mA cm^?2 for OER. The flexible Zn–air battery built with this catalyst exhibits an ultrahigh specific power of 300 W g_cat ^?1, which is essential for portable devices. This work provides a new design pathway for electrocatalysts for high‐performance rechargeable metal–air battery systems.     

Reduced Graphene Oxide‐Wrapped Co9–xFexS8/Co,Fe‐N‐C Composite as Bifunctional Electrocatalyst for Oxygen Reduction and Evolution

Searching for highly efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) using nonnoble metal‐based catalysts is essential for the development of many energy conversion systems, including rechargeable fuel cells and metal–air batteries. Here, Co_9–xFe_xS₈/Co,Fe‐N‐C hybrids wrapped by reduced graphene oxide (rGO) (abbreviated as S‐Co_9–xFe_xS₈@rGO) are synthesized through a semivulcanization and calcination method using graphene oxide (GO) wrapped bimetallic zeolite imidazolate framework (ZIF) Co,Fe‐ZIF (CoFe‐ZIF@GO) as precursors. Benefiting from the synergistic effect of OER active CoFeS and ORR active Co,Fe‐N‐C in a single component, as well as high dispersity and enhanced conductivity derived from rGO coating and Fe‐doping, the obtained S‐Co_9–xFe_xS₈@rGO‐10 catalyst shows an ultrasmall overpotential of ≈0.29 V at 10 mA cm^?2 in OER and a half‐wave potential of 0.84 V in ORR, combining a superior oxygen electrode activity of ≈0.68 V in 0.1 m KOH.     

ZIF‐8/ZIF‐67‐Derived Co‐Nx‐Embedded 1D Porous Carbon Nanofibers with Graphitic Carbon‐Encased Co Nanoparticles as an Efficient Bifunctional Electrocatalyst

Herein, an approach is reported for fabrication of Co‐N_x‐embedded 1D porous carbon nanofibers (CNFs) with graphitic carbon‐encased Co nanoparticles originated from metal–organic frameworks (MOFs), which is further explored as a bifunctional electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Electrochemical results reveal that the electrocatalyst prepared by pyrolysis at 1000 °C (CoNC‐CNF‐1000) exhibits excellent catalytic activity toward ORR that favors the four‐electron ORR process and outstanding long‐term stability with 86% current retention after 40 000 s. Meanwhile, it also shows superior electrocatalytic activity toward OER, reaching a lower potential of 1.68 V at 10 mA cm^?2 and a potential gap of 0.88 V between the OER potential (at 10 mA cm^?2) and the ORR half‐wave potential. The ORR and OER performance of CoNC‐CNF‐1000 have outperformed commercial Pt/C and most nonprecious‐metal catalysts reported to date. The remarkable ORR and OER catalytic performance can be mainly attributable to the unique 1D structure, such as higher graphitization degree beneficial for electronic mobility, hierarchical porosity facilitating the mass transport, and highly dispersed CoN_xC active sites functionalized carbon framework. This strategy will shed light on the development of other MOF‐based carbon nanofibers for energy storage and electrochemical devices.     

Electrosynthesis of Hydrogen Peroxide through Selective Oxygen Reduction: A Carbon Innovation from Active Site Engineering to Device Design

Electrochemical synthesis of hydrogen peroxide (H₂O₂) through the selective oxygen reduction reaction (ORR) offers a promising alternative to the energy-intensive anthraquinone method, while its success relies largely on the development of efficient electrocatalyst. Currently, carbon-based materials (CMs) are the most widely studied electrocatalysts for electrosynthesis of H₂O₂ via ORR due to their low cost, earth abundance, and tunable catalytic properties. To achieve a high 2e⁻ ORR selectivity, great progress is made in promoting the performance of carbon-based electrocatalysts and unveiling their underlying catalytic mechanisms. Here, a comprehensive review in the field is presented by summarizing the recent advances in CMs for H₂O₂ production, focusing on the design, fabrication, and mechanism investigations over the catalytic active moieties, where an enhancement effect of defect engineering or heteroatom doping on H₂O₂ selectivity is discussed thoroughly. Particularly, the influence of functional groups on CMs for a 2e⁻-pathway is highlighted. Further, for commercial perspectives, the significance of reactor design for decentralized H₂O₂ production is emphasized, bridging the gap between intrinsic catalytic properties and apparent productivity in electrochemical devices. Finally, major challenges and opportunities for the practical electrosynthesis of H₂O₂ and future research directions are proposed.     

Bifunctional Transition Metal Hydroxysulfides: Room‐Temperature Sulfurization and Their Applications in Zn–Air Batteries

Bifunctional electrocatalysis for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) constitutes the bottleneck of various sustainable energy devices and systems like rechargeable metal–air batteries. Emerging catalyst materials are strongly requested toward superior electrocatalytic activities and practical applications. In this study, transition metal hydroxysulfides are presented as bifunctional OER/ORR electrocatalysts for Zn–air batteries. By simply immersing Co‐based hydroxide precursor into solution with high‐concentration S^2?, transition metal hydroxides convert to hydroxysulfides with excellent morphology preservation at room temperature. The as‐obtained Co‐based metal hydroxysulfides are with high intrinsic reactivity and electrical conductivity. The electron structure of the active sites is adjusted by anion modulation. The potential for 10 mA cm^?2 OER current density is 1.588 V versus reversible hydrogen electrode (RHE), and the ORR half‐wave potential is 0.721 V versus RHE, with a potential gap of 0.867 V for bifunctional oxygen electrocatalysis. The Co₃FeS_1.5(OH)₆ hydroxysulfides are employed in the air electrode for a rechargeable Zn–air battery with a small overpotential of 0.86 V at 20.0 mA cm^?2, a high specific capacity of 898 mAh g^?1, and a long cycling life, which is much better than Pt and Ir‐based electrocatalyst in Zn–air batteries.     

Coordination Engineering of Defective Cobalt–Nitrogen–Carbon Electrocatalysts with Graphene Quantum Dots for Boosting Oxygen Reduction Reaction

Developing efficient and robust metal–nitrogen–carbon electrocatalysts for oxygen reduction reaction (ORR) is of great significance for the application of hydrogen–oxygen fuel cells and metal–air batteries. Herein, a coordination engineering strategy is developed to improve the ORR kinetics and stability of cobalt–nitrogen–carbon (Co–N–C) electrocatalysts by grafting the oxygen-rich graphene quantum dots (GQDs) onto the zeolite imidazole frameworks (ZIFs) precursors. The optimized oxygen-rich GQDs-functionalized Co–N–C (G-CoNOC) electrocatalyst demonstrates an increased mass activity, nearly two times higher than that of pristine defective Co–N–C electrocatalyst, and retains a stability of 90.0% after 200 h, even superior to the commercial Pt/C. Comprehensive investigations demonstrate that the GQDs coordination can not only decrease carbon defects of Co–N–C electrocatalysts, improving the electron transfer efficiency and resistance to the destructive free radicals from H₂O₂, but also optimize the electronic structure of atomic Co active site to achieve a desired adsorption energy of OOH⁻, leading to enhanced ORR kinetics and stability by promoting further H₂O₂ reduction, as confirmed by theoretical calculations and experimental results. Such a coordination engineering strategy provides a new perspective for the development of highly active noble-metal-free electrocatalysts for ORR.     

Graphene Decorated with Uniform Ultrathin (CoP)x–(FeP)1–x Nanorods: A Robust Non‐Noble‐Metal Catalyst for Hydrogen Evolution

Developing high‐performance but low‐cost hydrogen evolution reaction (HER) electrocatalysts with superior activity and stability for future sustainable energy conversion technologies is highly desired. Tuning of microstructure, configuration, and chemical composition are paramount to developing effective non‐noble electrocatalysts for HER. Herein, a universal “nanocasting” method is reported to construct graphene decorated with uniform ternary (CoP)_x –(FeP)_1?x (0 ≤ x ≤ 1) nanorods hybrids with different chemical compositions [(CoP)_x –(FeP)_1?x –NRs/G] as a highly active and durable nonprecious‐metal electrocatalyst for the HER. The optimized (CoP)_0.54–(FeP)_0.46–NRs/G electrocatalyst exhibits overpotentials of as low as 57 and 97 mV at 10 mA cm^?2, Tafel slopes of 52 and 62 mV dec^?1, exchange current densities of 0.489 and 0.454 mA cm^?2, and Faradaic efficiency of nearly 100% in acidic and alkaline media, respectively. More importantly, this electrocatalyst also exhibits high tolerance and durability in a wide pH range and keeps catalytic activity for at least 3000 cycles and 24 h of sustained hydrogen production. The excellent catalytic performance of the (CoP)_x –(FeP)_1?x –NRs/G electrocatalyst may be ascribed to its unique mesoporous structure and strong synergistic effect between CoP and FeP. Thus, the work provides a feasible way to fabricate cheap and highly efficient electrocatalyst as alternatives for Pt‐based electrocatalysts for HER in electrochemical water splitting.     

Trifunctional Single‐Atomic Ru Sites Enable Efficient Overall Water Splitting and Oxygen Reduction in Acidic Media

Development of cost‐effective, active trifunctional catalysts for acidic oxygen reduction (ORR) as well as hydrogen and oxygen evolution reactions (HER and OER, respectively) is highly desirable, albeit challenging. Herein, single‐atomic Ru sites anchored onto Ti₃C₂T_x MXene nanosheets are first reported to serve as trifunctional electrocatalysts for simultaneously catalyzing acidic HER, OER, and ORR. A half‐wave potential of 0.80 V for ORR and small overpotentials of 290 and 70 mV for OER and HER, respectively, at 10 mA cm^?2 are achieved. Hence, a low cell voltage of 1.56 V is required for the acidic overall water splitting. The maximum power density of an H₂–O₂ fuel cell using the as‐prepared catalyst can reach as high as 941 mW cm^?2. Theoretical calculations reveal that isolated Ru–O₂ sites can effectively optimize the adsorption of reactants/intermediates and lower the energy barriers for the potential‐determining steps, thereby accelerating the HER, ORR, and OER kinetics.     

Co Nanoparticles Confined in 3D Nitrogen‐Doped Porous Carbon Foams as Bifunctional Electrocatalysts for Long‐Life Rechargeable Zn–Air Batteries

Proper design and simple preparation of nonnoble bifunctional electrocatalysts with high cost performance and strong durability for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is highly demanded but still full of enormous challenges. In this work, a spontaneous gas‐foaming strategy is presented to synthesize cobalt nanoparticles confined in 3D nitrogen‐doped porous carbon foams (CoNCF) by simply carbonizing the mixture of citric acid, NH₄Cl, and Co(NO₃)₂·6H₂O. Thanks to its particular 3D porous foam architecture, ultrahigh specific surface area (1641 m² g^?1), and homogeneous distribution of active sites (C–N, Co–N_x, and Co–O moieties), the optimized CoNCF‐1000‐80 (carbonized at 1000 °C, containing 80 mg Co(NO₃)₂·6H₂O in precursors) catalyst exhibits a remarkable bifunctional activity and long‐term durability toward both ORR and OER. Its bifunctional activity parameter (ΔE) is as low as 0.84 V, which is much smaller than that of noble metal catalyst and comparable to state‐of‐the‐art bifunctional catalysts. When worked as an air electrode catalyst in rechargeable Zn–air batteries, a high energy density (797 Wh kg^?1), a low charge/discharge voltage gap (0.75 V), and a long‐term cycle stability (over 166 h) are achieved at 10 mA cm^?2.     

Single Fe Atom on Hierarchically Porous S,N‐Codoped Nanocarbon Derived from Porphyra Enable Boosted Oxygen Catalysis for Rechargeable Zn‐Air Batteries

Iron–nitrogen–carbon materials (Fe–N–C) are known for their excellent oxygen reduction reaction (ORR) performance. Unfortunately, they generally show a laggard oxygen evolution reaction (OER) activity, which results in a lethargic charging performance in rechargeable Zn–air batteries. Here porous S‐doped Fe–N–C nanosheets are innovatively synthesized utilizing a scalable FeCl₃‐encapsulated‐porphyra precursor pyrolysis strategy. The obtained electrocatalyst exhibits ultrahigh ORR activity (E_1/2 = 0.84 V vs reversible hydrogen electrode) and impressive OER performance (E_{j = 10} = 1.64 V). The potential gap (ΔE = E_{j = 10} ? E_1/2) is 0.80 V, outperforming that of most highly active bifunctional electrocatalysts reported to date. Furthermore, the key role of S involved in the atomically dispersed Fe–Nx species on the enhanced ORR and OER activities is expounded for the first time by ultrasound‐assisted extraction of the exclusive S source (taurine) from porphyra. Moreover, the assembled rechargeable Zn–air battery comprising this bifunctional electrocatalyst exhibits higher power density (225.1 mW cm^?2) and lower charging–discharging overpotential (1.00 V, 100 mA cm^?2 compared to Pt/C + RuO₂ catalyst). The design strategy can expand the utilization of earth‐abundant biomaterial‐derived catalysts, and the mechanism investigations of S doping on the structure–activity relationship can inspire the progress of other functional electrocatalysts.     

Sustainable Synthesis of Co@NC Core Shell Nanostructures from Metal Organic Frameworks via Mechanochemical Coordination Self‐Assembly: An Efficient Electrocatalyst for Oxygen Reduction Reaction

Herein, a new type of cobalt encapsulated nitrogen‐doped carbon (Co@NC) nanostructure employing Zn_xCo_1?x(C₃H₄N₂) metal–organic framework (MOF) as precursor is developed, by a simple, ecofriendly, solvent‐free approach that utilizes a mechanochemical coordination self‐assembly strategy. Possible evolution of Zn_xCo_1?x(C₃H₄N₂) MOF structures and their conversion to Co@NC nanostructures is established from an X‐ray diffraction technique and transmission electron microscopy analysis, which reveal that MOF‐derived Co@NC core–shell nanostructures are well ordered and highly crystalline in nature. Co@NC–MOF core–shell nanostructures show excellent catalytic activity for the oxygen reduction reaction (ORR), with onset potential of 0.97 V and half‐wave potential of 0.88 V versus relative hydrogen electrode in alkaline electrolyte, and excellent durability with zero degradation after 5000 potential cycles; whereas under similar experimental conditions, the commonly utilized Pt/C electrocatalyst degrades. The Co@NC–MOF electrocatalyst also shows excellent tolerance to methanol, unlike the Pt/C electrocatalyst. X‐ray photoelectron spectroscopy (XPS) analysis shows the presence of ORR active pyridinic‐N and graphitic‐N species, along with CoN_x? C_y and Co? N_x ORR active (M–N–C) sites. Enhanced electron transfer kinetics from nitrogen‐doped carbon shell to core Co nanoparticles, the existence of M–N–C active sites, and protective NC shells are responsible for high ORR activity and durability of the Co@NC–MOF electrocatalyst.     

Atomic‐Level Fe‐N‐C Coupled with Fe3C‐Fe Nanocomposites in Carbon Matrixes as High‐Efficiency Bifunctional Oxygen Catalysts

Highly active and durable bifunctional oxygen electrocatalysts are of pivotal importance for clean and renewable energy conversion devices, but the lack of earth‐abundant electrocatalysts to improve the intrinsic sluggish kinetic process of oxygen reduction/evolution reactions (ORR/OER) is still a challenge. Fe‐N‐C catalysts with abundant natural merits are considered as promising alternatives to noble‐based catalysts, yet further improvements are urgently needed because of their poor stability and unclear catalytic mechanism. Here, an atomic‐level Fe‐N‐C electrocatalyst coupled with low crystalline Fe₃C‐Fe nanocomposite in 3D carbon matrix (Fe‐SAs/Fe₃C‐Fe@NC) is fabricated by a facile and scalable method. Versus atomically FeN_x species and crystallized Fe₃C‐Fe nanoparticles, Fe‐SAs/Fe₃C‐Fe@NC catalyst, abundant in vertical branched carbon nanotubes decorated on intertwined carbon nanofibers, exhibits high electrocatalytic activities and excellent stabilities both in ORR (E_1/2, 0.927 V) and OER (E_J=10, 1.57 V). This performance benefits from the strong synergistic effects of multicomponents and the unique structural advantages. In‐depth X‐ray absorption fine structure analysis and density functional theory calculation further demonstrate that more extra charges derived from modified Fe clusters decisively promote the ORR/OER performance for atomically FeN₄ configurations by enhanced oxygen adsorption energy. These insightful findings inspire new perspectives for the rational design and synthesis of economical–practical bifunctional oxygen electrocatalysts.     

Superexchange Effects on Oxygen Reduction Activity of Edge‐Sharing [CoxMn1−xO6] Octahedra in Spinel Oxide

Mn–Co containing spinel oxides are promising, low‐cost electrocatalysts for the oxygen reduction reaction (ORR). Most studies are devoted to the design of porous Mn–Co spinels or to strongly coupled hybrids (e.g., MnCo₂O₄/N‐doped‐rmGO) to maximize the mass efficiency. The lack of analyses by metal oxide intrinsic activity (activity normalized to catalysts' surface area) hinders the development of fundamental understanding of the physicochemical principles behind the catalytic activities. A systematic study on the composition dependence of ORR in ZnCo_xMn_2?xO₄ (x = 0.0–2.0) spinel is presented here with special attention to the role of edge sharing [Co_xMn_1?xO₆] octahedra in the spinel structure. The ORR specific activity of ZnCo_xMn_2?xO₄ spans across a potential window of 200 mV, indicating an activity difference of ≈3 orders of magnitude. The curve of composition‐dependent ORR specific activity as a function of Co substitution exhibits a volcano shape with an optimum Mn/Co ratio of 0.43. It is revealed that the modulated e_g occupancy of active Mn cations (0.3–0.9), as a consequence of the superexchange effect between edge sharing [CoO₆] and [MnO₆], reflects the ORR activity of edge sharing [Co_xMn_1?xO₆] octahedra in the ZnCo_xMn_2?xO₄ spinel oxide. These findings offer crucial insights in designing spinel oxide catalysts with fine‐tuned e_g occupancy for efficient catalysis.     

Amorphous Bimetallic Oxide–Graphene Hybrids as Bifunctional Oxygen Electrocatalysts for Rechargeable Zn–Air Batteries

Metal oxides of earth‐abundant elements are promising electrocatalysts to overcome the sluggish oxygen evolution and oxygen reduction reaction (OER/ORR) in many electrochemical energy‐conversion devices. However, it is difficult to control their catalytic activity precisely. Here, a general three‐stage synthesis strategy is described to produce a family of hybrid materials comprising amorphous bimetallic oxide nanoparticles anchored on N‐doped reduced graphene oxide with simultaneous control of nanoparticle elemental composition, size, and crystallinity. Amorphous Fe_0.5Co_0.5O_x is obtained from Prussian blue analog nanocrystals, showing excellent OER activity with a Tafel slope of 30.1 mV dec^?1 and an overpotential of 257 mV for 10 mA cm^?2 and superior ORR activity with a large limiting current density of ?5.25 mA cm^?2 at 0.6 V. A fabricated Zn–air battery delivers a specific capacity of 756 mA h g_Zn^?1 (corresponding to an energy density of 904 W h kg_Zn^?1), a peak power density of 86 mW cm^?2 and can be cycled over 120 h at 10 mA cm^?2. Other two amorphous bimetallic, Ni_0.4Fe_0.6O_x and Ni_0.33Co_0.67O_x , are also produced to demonstrate the general applicability of this method for synthesizing binary metal oxides with controllable structures as electrocatalysts for energy conversion.     

Metal–Organic‐Framework‐Derived Hybrid Carbon Nanocages as a Bifunctional Electrocatalyst for Oxygen Reduction and Evolution

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are cornerstone reactions for many renewable energy technologies. Developing cheap yet durable substitutes of precious‐metal catalysts, especially the bifunctional electrocatalysts with high activity for both ORR and OER reactions and their streamlined coupling process, are highly desirable to reduce the processing cost and complexity of renewable energy systems. Here, a facile strategy is reported for synthesizing double‐shelled hybrid nanocages with outer shells of Co‐N‐doped graphitic carbon (Co‐NGC) and inner shells of N‐doped microporous carbon (NC) by templating against core–shell metal–organic frameworks. The double‐shelled NC@Co‐NGC nanocages well integrate the high activity of Co‐NGC shells into the robust NC hollow framework with enhanced diffusion kinetics, exhibiting superior electrocatalytic properties to Pt and RuO₂ as a bifunctional electrocatalyst for ORR and OER, and hold a promise as efficient air electrode catalysts in Zn–air batteries. First‐principles calculations reveal that the high catalytic activities of Co‐NGC shells are due to the synergistic electron transfer and redistribution between the Co nanoparticles, the graphitic carbon, and the doped N species. Strong yet favorable adsorption of an OOH* intermediate on the high density of uncoordinated hollow‐site C atoms with respect to the Co lattice in the Co‐NGC structure is a vital rate‐determining step to achieve excellent bifunctional electrocatalytic activity.     

An Oxygen‐Vacancy‐Rich Semiconductor‐Supported Bifunctional Catalyst for Efficient and Stable Zinc–Air Batteries

The highly oxidative operating conditions of rechargeable zinc–air batteries causes significant carbon‐support corrosion of bifunctional oxygen electrocatalysts. Here, a new strategy for the catalyst support design focusing on oxygen vacancy (OV)‐rich, low‐bandgap semiconductor is proposed. The OVs promote the electrical conductivity of the oxide support, and at the same time offer a strong metal–support interaction (SMSI), which enables the catalysts to have small metal size, high catalytic activity, and high stability. The strategy is demonstrated by successfully synthesizing ultrafine Co‐metal‐decorated 3D ordered macroporous titanium oxynitride (3DOM‐Co@TiO_xN_y). The 3DOM‐Co@TiO_xN_y catalyst exhibits comparable activities for oxygen reduction and evolution reactions, but much higher cycling stability than noble metals in alkaline conditions. The zinc–air battery using this catalyst delivers an excellent stability with less than 1% energy efficiency loss over 900 charge–discharge cycles at 20 mA cm^?2. The high stability is attributed to the strong SMSI between Co and 3DOM‐TiO_xN_y which is verified by density functional theory calculations. This work sheds light on using OV‐rich semiconductors as a promising support to design efficient and durable nonprecious electrocatalysts.     

Synthesis of Bimetallic Conductive 2D Metal–Organic Framework (CoxNiy‐CAT) and Its Mass Production: Enhanced Electrochemical Oxygen Reduction Activity

The development of new electrocatalysts for electrochemical oxygen reduction to replace expensive and rare platinum‐based catalysts is an important issue in energy storage and conversion research. In this context, conductive and porous metal–organic frameworks (MOFs) are considered promising materials for the oxygen reduction reaction (ORR) due to not only their high surface area and well‐developed pores but also versatile structural features and chemical compositions. Herein, the preparation of bimetallic conductive 2D MOFs (Co_xNi_y‐CATs) are reported for use as catalysts in the ORR. The ratio of the two metal ions (Co²⁺ and Ni²⁺) in the bimetallic Co_xNi_y‐CATs is rationally controlled to determine the optimal composition of Co_xNi_y‐CAT for efficient performance in the ORR. Indeed, bimetallic MOFs display enhanced ORR activity compared to their monometallic counterparts (Co‐CAT or Ni‐CAT). During the ORR, bimetallic Co_xNi_y‐CATs retain an advantageous characteristic of Co‐CAT in relation to its high diffusion‐limiting current density, as well as a key advantage of Ni‐CAT in relation to its high onset potential. Moreover, the ORR‐active bimetallic Co_xNi_y‐CAT with excellent ORR activity is prepared at a large scale via a convenient method using a ball‐mill reactor.     

Tailoring the Electrochemical Production of H2O2: Strategies for the Rational Design of High‐Performance Electrocatalysts

The production of H₂O₂ via the electrochemical oxygen reduction reaction (ORR) presents an attractive decentralized alternative to the current industry‐dominant anthraquinone process. However, in order to achieve viable commercialization of this process, a state‐of‐the‐art electrocatalyst exhibiting high activity, selectivity, and long‐term stability is imperative for industrial applications. Herein, an in‐depth discussion on the current frontiers in electrocatalyst design is provided, emphasizing the influences of electronic and geometric effects, surface structure, and the effects of heteroatom functionalization on the catalytic performance of commonly studied materials (metals, alloys, carbons). The limitations on the performance of the current catalyst materials are also discussed, together with alternative strategies to overcome the impediments. Finally, directions of future research efforts for the discovery of next‐generation ORR electrocatalysts are highlighted.     

Significant Enhancement of Water Splitting Activity of N‐Carbon Electrocatalyst by Trace Level Co Doping

Replacement of precious metal electrocatalysts with highly active and cost efficient alternatives for complete water splitting at low voltage has attracted a growing attention in recent years. Here, this study reports a carbon‐based composite co‐doped with nitrogen and trace amount of metallic cobalt (1 at%) as a bifunctional electrocatalyst for water splitting at low overpotential and high current density. An excellent electrochemical activity of the newly developed electrocatalyst originates from its graphitic nanostructure and highly active Co‐N_x sites. In the case of carefully optimized sample of this electrocatalyst, 10 mA cm^?2 current density can be achieved for two half reactions in alkaline solutions—hydrogen evolution reaction and oxygen evolution reaction—at low overpotentials of 220 and 350 mV, respectively, which are smaller than those previously reported for nonprecious metal and metal‐free counterparts. Based on the spectroscopic and electrochemical investigations, the newly identified Co‐N_x sites in the carbon framework are responsible for high electrocatalytic activity of the Co,N‐doped carbon. This study indicates that a trace level of the introduced Co into N‐doped carbon can significantly enhance its electrocatalytic activity toward water splitting.