Construction of Defect‐Rich Ni‐Fe‐Doped K0.23MnO2 Cubic Nanoflowers via Etching Prussian Blue Analogue for Efficient Overall Water Splitting

Designing elaborate nanostructures and engineering defects have been promising approaches to fabricate cost‐efficient electrocatalysts toward overall water splitting. In this work, a controllable Prussian‐blue‐analogue‐sacrificed strategy followed by an annealing process to harvest defect‐rich Ni‐Fe‐doped K_0.23MnO₂ cubic nanoflowers (Ni‐Fe‐K_0.23MnO₂ CNFs‐300) as highly active bifunctional catalysts for oxygen and hydrogen evolution reactions (OER and HER) is reported. Benefiting from many merits, including unique morphology, abundant defects, and doping effect, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 shows the best electrocatalytic performances among currently reported Mn oxide‐based electrocatalysts. This catalyst affords low overpotentials of 270 (320) mV at 10 (100) mA cm^?2 for OER with a small Tafel slope of 42.3 mV dec^?1, while requiring overpotentials of 116 and 243 mV to attain 10 and 100 mA cm^?2 for HER respectively. Moreover, Ni‐Fe‐K_0.23MnO₂ CNFs‐300 applied to overall water splitting exhibits a low cell voltage of 1.62 V at 10 mA cm^?2 and excellent durability, even superior to the Pt/C||IrO₂ cell at large current density. Density functional theory calculations further confirm that doping Ni and Fe into the crystal lattice of δ‐MnO₂ can not only reinforce the conductivity but also reduces the adsorption free‐energy barriers on the active sites during OER and HER.     

A Heterostructure Coupling of Exfoliated Ni–Fe Hydroxide Nanosheet and Defective Graphene as a Bifunctional Electrocatalyst for Overall Water Splitting

Herein, the authors demonstrate a heterostructured NiFe LDH‐NS@DG10 hybrid catalyst by coupling of exfoliated Ni–Fe layered double hydroxide (LDH) nanosheet (NS) and defective graphene (DG). The catalyst has exhibited extremely high electrocatalytic activity for oxygen evolution reaction (OER) in an alkaline solution with an overpotential of 0.21 V at a current density of 10 mA cm^?2, which is comparable to the current record (≈0.20 V in Fe–Co–Ni metal‐oxide‐film system) and superior to all other non‐noble metal catalysts. Also, it possesses outstanding kinetics (Tafel slope of 52 mV dec^?1) for the reaction. Interestingly, the NiFe LDH‐NS@DG10 hybrid has also exhibited the high hydrogen evolution reaction (HER) performance in an alkaline solution (with an overpotential of 115 mV by 2 mg cm^?2 loading at a current density of 20 mA cm^?2) in contrast to barely HER activity for NiFe LDH‐NS itself. As a result, the bifunctional catalyst the authors developed can achieve a current density of 20 mA cm^?2 by a voltage of only 1.5 V, which is also a record for the overall water splitting. Density functional theory calculation reveals that the synergetic effects of highly exposed 3d transition metal atoms and carbon defects are essential for the bifunctional activity for OER and HER.     

Single Ni Atoms and Clusters Embedded in N‐Doped Carbon “Tubes on Fibers” Matrix with Bifunctional Activity for Water Splitting at High Current Densities

Among the bifunctional catalysts for water splitting, recently emerged transition‐metal single‐atom catalysts are theoretically considered to possess high potential, while the experimental activity is not satisfactory yet. Herein, an exceptionally efficient trifunctional metal–nitrogen–carbon (M–N–C) catalyst electrode, composed of a hierarchical carbon matrix embedding isolated nickel atoms with nickel–iron (NiFe) clusters, is presented. 1D microfibers and nanotubes grow sequentially from 2D nanosheets as sacrificial templates via two stages of solution‐ and solid‐phase reactions to form a 1D hierarchy. Exceptionally efficient bifunctional activity with an overpotential of only 13 mV at 10 mA cm^?2 toward hydrogen evolution reaction (HER) and an overpotential of 210 mV at 30 mA cm^?2 toward oxygen evolution reaction (OER) is obtained, surpassing each monofunctional activity ever reported. More importantly, an overpotential of only 126 and 326 mV is required to drive 500 mA cm^?2 toward the HER and OER, respectively. For the first time, industrial‐scale water splitting with two bifunctional catalyst electrodes with a current density of 500 mA cm^?2 at a potential of 1.71 V is demonstrated. Lastly, trifunctional catalytic activity including oxygen reduction reaction is also proven with a half‐wave potential at 0.848 V.     

Strong Electronic Interaction in Dual‐Cation‐Incorporated NiSe2 Nanosheets with Lattice Distortion for Highly Efficient Overall Water Splitting

Exploring highly efficient and low‐cost electrocatalysts for electrochemical water splitting is of importance for the conversion of intermediate energy. Herein, the synthesis of dual‐cation (Fe, Co)‐incorporated NiSe₂ nanosheets (Fe, Co‐NiSe₂) and systematical investigation of their electrocatalytic performance for water splitting as a function of the composition are reported. The dual‐cation incorporation can distort the lattice and induce stronger electronic interaction, leading to increased active site exposure and optimized adsorption energy of reaction intermediates compared to single‐cation‐doped or pure NiSe₂. As a result, the obtained Fe_0.09Co_0.13‐NiSe₂ porous nanosheet electrode shows an optimized catalytic activity with a low overpotential of 251 mV for oxygen evolution reaction and 92 mV for hydrogen evolution reaction (both at 10 mA cm^?2 in 1 m KOH). When used as bifunctional electrodes for overall water splitting, the current density of 10 mA cm^?2 is achieved at a low cell voltage of 1.52 V. This work highlights the importance of dual‐cation doping in enhancing the electrocatalyst performance of transition metal dichalcogenides.     

Ruthenium Nanoparticles on Cobalt‐Doped 1T′ Phase MoS2 Nanosheets for Overall Water Splitting

2D MoS₂ nanostructures have recently attracted considerable attention because of their outstanding electrocatalytic properties. The synthesis of unique Co–Ru–MoS₂ hybrid nanosheets with excellent catalytic activity toward overall water splitting in alkaline solution is reported. 1T′ phase MoS₂ nanosheets are doped homogeneously with Co atoms and decorated with Ru nanoparticles. The catalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is characterized by low overpotentials of 52 and 308 mV at 10 mA cm^?2 and Tafel slopes of 55 and 50 mV decade^?1 in 1.0 m KOH, respectively. Analysis of X‐ray photoelectron and absorption spectra of the catalysts show that the MoS₂ well retained its metallic 1T′ phase, which guarantees good electrical conductivity during the reaction. The Gibbs free energy calculation for the reaction pathway in alkaline electrolyte confirms that the Ru nanoparticles on the Co‐doped MoS₂ greatly enhance the HER activity. Water adsorption and dissociation take place favorably on the Ru, and the doped Co further catalyzes HER by making the reaction intermediates more favorable. The high OER performance is attributed to the catalytically active RuO₂ nanoparticles that are produced via oxidation of Ru nanoparticles.     

Molybdenum Carbide‐Decorated Metallic Cobalt@Nitrogen‐Doped Carbon Polyhedrons for Enhanced Electrocatalytic Hydrogen Evolution

Electrocatalytic hydrogen evolution reaction (HER) based on water splitting holds great promise for clean energy technologies, in which the key issue is exploring cost‐effective materials to replace noble metal catalysts. Here, a sequential chemical etching and pyrolysis strategy are developed to prepare molybdenum carbide‐decorated metallic cobalt@nitrogen‐doped porous carbon polyhedrons (denoted as Mo/Co@N–C) hybrids for enhanced electrocatalytic hydrogen evolution. The obtained metallic Co nanoparticles are coated by N‐doped carbon thin layers while the formed molybdenum carbide nanoparticles are well‐dispersed in the whole Co@N–C frames. Benefiting from the additionally implanted molybdenum carbide active sites, the HER performance of Mo/Co@N–C hybrids is significantly promoted compared with the single Co@N–C that is derived from the pristine ZIF‐67 both in alkaline and acidic media. As a result, the as‐synthesized Mo/Co@N–C hybrids exhibit superior HER electrocatalytic activity, and only very low overpotentials of 157 and 187 mV are needed at 10 mA cm^?2 in 1 m KOH and 0.5 m H₂SO₄, respectively, opening a door for rational design and fabrication of novel low‐cost electrocatalysts with hierarchical structures toward electrochemical energy storage and conversion.     

Self‐Supportive Mesoporous Ni/Co/Fe Phosphosulfide Nanorods Derived from Novel Hydrothermal Electrodeposition as a Highly Efficient Electrocatalyst for Overall Water Splitting

Low cost and highly efficient bifuctional catalysts for overall water electrolysis have drawn considerable interests over the past several decades. Here, rationally synthesized mesoporous nanorods of nickel–cobalt–iron–sulfur–phosphorus composites are tightly self‐supported on Ni foam as a high‐performance, low cost, and stable bifunctional electrocatalyst for water electrolysis. The targeted designing and rational fabrication give rise to the nanorod‐like morphology with large surface area and excellent conductivity. The NiCoFe‐PS nanorod/NF can reach 10 mA cm^?2 at a small overpotential of 195 mV with a Tafel slope of 40.3 mV dec^?1 for the oxygen evolution reaction and 97.8 mV with 51.8 mV dec^?1 for the hydrogen evolution reaction. Thus, this bifunctional catalyst shows low potentials of 1.52 and 1.76 V at 10 and 50 mA cm^?2 toward overall water splitting with excellent stability for over 200 h, which are superior to most non‐noble metal‐based bifunctional electrocatalysts recently. This work provides a new strategy to fabricate multiple metal‐P/S composites with the mesoporous nanorod‐like structure as bifunctional catalysts for overall water splitting.     

Phosphorus Regulated Cobalt Oxide@Nitrogen‐Doped Carbon Nanowires for Flexible Quasi‐Solid‐State Supercapacitors

Battery‐type materials are promising candidates for achieving high specific capacity for supercapacitors. However, their slow reaction kinetics hinders the improvement in electrochemical performance. Herein, a hybrid structure of P‐doped Co₃O₄ (P‐Co₃O₄) ultrafine nanoparticles in situ encapsulated into P, N co‐doped carbon (P, N‐C) nanowires by a pyrolysis–oxidation–phosphorization of 1D metal–organic frameworks derived from Co‐layered double hydroxide as self‐template and reactant is reported. This hybrid structure prevents active material agglomeration and maintains a 1D oriented arrangement, which exhibits a large accessible surface area and hierarchically porous feature, enabling sufficient permeation and transfer of electrolyte ions. Theoretical calculations demonstrate that the P dopants in P‐Co₃O₄@P, N‐C could reduce the adsorption energy of OH^? and regulate the electrical properties. Accordingly, the P‐Co₃O₄@P, N‐C delivers a high specific capacity of 669 mC cm^?2 at 1 mA cm^?2 and an ultralong cycle life with only 4.8% loss over 5000 cycles at 30 mA cm^?2. During the fabrication of P‐Co₃O₄@P, N‐C, Co@P, N‐C is simultaneously developed, which can be integrated with P‐Co₃O₄@P, N‐C for the assembly of asymmetric supercapacitors. These devices achieve a high energy density of 47.6 W h kg^?1 at 750 W kg^?1 and impressive flexibility, exhibiting a great potential in practical applications.     

Novel MOF‐Derived Co@N‐C Bifunctional Catalysts for Highly Efficient Zn–Air Batteries and Water Splitting

Metal–organic frameworks (MOFs) and MOF‐derived materials have recently attracted considerable interest as alternatives to noble‐metal electrocatalysts. Herein, the rational design and synthesis of a new class of Co@N‐C materials (C‐MOF‐C2‐T) from a pair of enantiotopic chiral 3D MOFs by pyrolysis at temperature T is reported. The newly developed C‐MOF‐C2‐900 with a unique 3D hierarchical rodlike structure, consisting of homogeneously distributed cobalt nanoparticles encapsulated by partially graphitized N‐doped carbon rings along the rod length, exhibits higher electrocatalytic activities for oxygen reduction and oxygen evolution reactions (ORR and OER) than that of commercial Pt/C and RuO₂, respectively. Primary Zn–air batteries based on C‐MOF‐900 for the oxygen reduction reaction (ORR) operated at a discharge potential of 1.30 V with a specific capacity of 741 mA h g_Zn^–1 under 10 mA cm^–2. Rechargeable Zn–air batteries based on C‐MOF‐C2‐900 as an ORR and OER bifunctional catalyst exhibit initial charge and discharge potentials at 1.81 and 1.28 V (2 mA cm^–2), along with an excellent cycling stability with no increase in polarization even after 120 h – outperform their counterparts based on noble‐metal‐based air electrodes. The resultant rechargeable Zn–air batteries are used to efficiently power electrochemical water‐splitting systems, demonstrating promising potential as integrated green energy systems for practical applications.     

Phosphorus‐Doped Iron Nitride Nanoparticles Encapsulated by Nitrogen‐Doped Carbon Nanosheets on Iron Foam In Situ Derived from Saccharomycetes Cerevisiae for Electrocatalytic Overall Water Splitting

It is vitally essential to propose a novel, economical, and safe preparation method to design highly efficient electrocatalysts. Herein, phosphorus‐doped iron nitride nanoparticles encapsulated by nitrogen‐doped carbon nanosheets are grown directly on the iron foam substrate (P‐Fe₃N@NC NSs/IF) by in situ deriving from Saccharomycetes cerevisiae (S. cerevisiae), where anion elements of C, N, and P all from S. cerevisiae replace the hazardous CH₄, NH₃, and H₃P. The diffusion pattern of N, P in S. cerevisiae and contact form between metal and S. cerevisiae observably affect the composition and phase of the product during high‐temperature calcination. The obtained P‐Fe₃N@NC NSs/IF demonstrates superior electrocatalytic performance for the hydrogen evolution reaction and oxygen evolution reaction, also satisfying durability. Theoretical calculation confirms that Fe sites of P‐Fe₃N serve as the active center, and N sites and P doping regulate the hydrogen binding strength to enhance catalytic ability. Additionally, the two‐electrode electrolyzer assembled by P‐Fe₃N@NC NSs/IF as both anode and cathode electrodes needs only 1.61 V to reach 10 mA cm^?2 for overall water splitting with a superb stability. The S. cerevisiae‐based process presents a feasible approach for synthesis of nitrides, carbides, phosphides, and electrocatalytic applications.     

Fe2+‐Doped Layered Double (Ni,Fe) Hydroxides as Efficient Electrocatalysts for Water Splitting and Self‐Powered Electrochemical Systems

Developing nonprecious electrocatalysts with superior activity and durability for electrochemical water splitting is of great interest but challenging due to the large overpotential required above the thermodynamic standard potential of water splitting (1.23 V). Here, in situ growth of Fe²⁺‐doped layered double (Ni, Fe) hydroxide (NiFe(II,III)‐LDH) on nickel foam with well‐defined hexagonal morphology and high crystallinity by a redox reaction between Fe³⁺ and nickel foam under hydrothermal conditions is reported. Benefiting from tuning the local atomic structure by self‐doping Fe²⁺, the NiFe(II,III)‐LDH catalyst with higher amounts of Fe²⁺ exhibits high activity toward oxygen evolution reaction (OER) as well as hydrogen evolution reaction (HER) activity. Moreover, the optimized NiFe(II,III)‐LDH catalyst for OER (O‐NiFe(II,III)‐LDH) and catalyst for HER (H‐NiFe(II,III)‐LDH) show overpotentials of 140 and 113 mV, respectively, at a current density of 10 mA cm^?2 in 1 m KOH aqueous electrolyte. Using the catalysts for overall water splitting in two‐electrode configuration, a low overpotential of just 1.54 V is required at a benchmark current density of 10 mA cm^?2. Furthermore, it is demonstrated that electrolysis of the water device can be drived by a self‐powered system through integrating a triboelectric nanogenerator and battery, showing a promising way to realize self‐powered electrochemical systems.     

Co Nanoparticles Confined in 3D Nitrogen‐Doped Porous Carbon Foams as Bifunctional Electrocatalysts for Long‐Life Rechargeable Zn–Air Batteries

Proper design and simple preparation of nonnoble bifunctional electrocatalysts with high cost performance and strong durability for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is highly demanded but still full of enormous challenges. In this work, a spontaneous gas‐foaming strategy is presented to synthesize cobalt nanoparticles confined in 3D nitrogen‐doped porous carbon foams (CoNCF) by simply carbonizing the mixture of citric acid, NH₄Cl, and Co(NO₃)₂·6H₂O. Thanks to its particular 3D porous foam architecture, ultrahigh specific surface area (1641 m² g^?1), and homogeneous distribution of active sites (C–N, Co–N_x, and Co–O moieties), the optimized CoNCF‐1000‐80 (carbonized at 1000 °C, containing 80 mg Co(NO₃)₂·6H₂O in precursors) catalyst exhibits a remarkable bifunctional activity and long‐term durability toward both ORR and OER. Its bifunctional activity parameter (ΔE) is as low as 0.84 V, which is much smaller than that of noble metal catalyst and comparable to state‐of‐the‐art bifunctional catalysts. When worked as an air electrode catalyst in rechargeable Zn–air batteries, a high energy density (797 Wh kg^?1), a low charge/discharge voltage gap (0.75 V), and a long‐term cycle stability (over 166 h) are achieved at 10 mA cm^?2.     

Highly Robust Non‐Noble Alkaline Hydrogen‐Evolving Electrocatalyst from Se‐Doped Molybdenum Disulfide Particles on Interwoven CoSe2 Nanowire Arrays

Developing efficient non‐noble and earth‐abundant hydrogen‐evolving electrocatalysts is highly desirable for improving the energy efficiency of water splitting in base. Molybdenum disulfide (MoS₂) is a promising candidate, but its catalytic activity is kinetically retarded in alkaline media due to the unfavorable water adsorption and dissociation feature. A heterogeneous electrocatalyst is reported that is constructed by selenium‐doped MoS₂ (Se‐MoS₂) particles on 3D interwoven cobalt diselenide (CoSe₂) nanowire arrays that drives the hydrogen evolution reaction (HER) with fast reaction kinetics in base. The resultant Se‐MoS₂/CoSe₂ hybrid exhibits an outstanding catalytic HER performance with extremely low overpotentials of 30 and 93 mV at 10 and 100 mA cm^–2 in base, respectively, which outperforms most of the inexpensive alkaline HER catalysts, and is among the best alkaline catalytic activity reported so far. Moreover, this hybrid catalyst shows exceptional catalytic performance with very low overpotentials of 84 and 95 mV at 10 mA cm^–2 in acidic and neutral electrolytes, respectively, implying robust pH universality of this hybrid catalyst. This work may provide new inspirations for the development of high‐performance MoS₂‐based HER electrocatalysts in unfavorable basic media for promising catalytic applications.     

Cobalt Phosphides Nanocrystals Encapsulated by P‐Doped Carbon and Married with P‐Doped Graphene for Overall Water Splitting

As one class of important functional materials, transition metal phosphides (TMPs) nanostructures show promising applications in catalysis and energy storage fields. Although great progress has been achieved, phase‐controlled synthesis of cobalt phosphides nanocrystals or related nanohybrids remains a challenge, and their use in overall water splitting (OWS) is not systematically studied. Herein, three kinds of cobalt phosphides nanocrystals encapsulated by P‐doped carbon (PC) and married with P‐doped graphene (PG) nanohybrids, including CoP@PC/PG, CoP‐Co₂P@PC/PG, and Co₂P@PC/PG, are obtained through controllable thermal conversion of presynthesized supramolecular gels that contain cobalt salt, phytic acid, and graphene oxides at proper temperature under Ar/H₂ atmosphere. Among them, the mixed‐phase CoP‐Co₂P@PC/PG nanohybrids manifest high electrocatalytic activity toward both hydrogen and oxygen evolution in alkaline media. Remarkably, using them as bifunctional catalysts, the fabricated CoP‐Co₂P@PC/PG || CoP‐Co₂P@PC/PG electrolyzer only needs a cell voltage of 1.567 V for driving OWS to reach the current density at 10 mA cm^?2, superior to their pure‐phase counterparts and recently reported bifunctional catalysts based devices. Also, such a CoP‐Co₂P@PC/PG || CoP‐Co₂P@PC/PG device exhibits outstanding stability for OWS. This work may shed some light on optimizing TMPs nanostructures based on phase engineering, and promote their applications in OWS or other renewable energy options.     

Graphdiyne‐Supported NiCo2S4 Nanowires: A Highly Active and Stable 3D Bifunctional Electrode Material

The oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting are major energy and chemical conversion efforts. Progress in electrocatalytic reactions have shown that the future is limitless in many fields. However, it is urgent to develop efficient electrocatalysts. Here, the first graphdiyne‐supported efficient and bifunctional electrocatalyst is reported using 3D graphdiyne foam as scaffolds, and NiCo₂S₄ nanowires as building blocks (NiCo₂S₄ NW/GDF). NiCo₂S₄ NW/GDF exhibits outstanding catalytic activity and stability toward both OER and HER, as well as overall water splitting in alkaline media. Remarkably, it enables a high‐performance alkaline water electrolyzer with 10 and 20 mA cm^?2 at very low cell voltages of 1.53 and 1.56 V, respectively, and remarkable stability over 140 h of continuous electrolysis operation at 20 mA cm^?2. The results indicate that this catalyst has a bifunction that overcomes all reported bifunctional, nonprecious‐metal‐based ones.     

Nickel@Nitrogen‐Doped Carbon@MoS2 Nanosheets: An Efficient Electrocatalyst for Hydrogen Evolution Reaction

Developing cheap, abundant, and easily available electrocatalysts to drive the hydrogen evolution reaction (HER) at small overpotentials is an urgent demand of hydrogen production from water splitting. Molybdenum disulfide (MoS₂) based composites have emerged as competitive electrocatalysts for HER in recent years. Herein, nickel@nitrogen‐doped carbon@MoS₂ nanosheets (Ni@NC@MoS₂) hybrid sub‐microspheres are presented as HER catalyst. MoS₂ nanosheets with expanded interlayer spacings are vertically grown on nickel@nitrogen‐doped carbon (Ni@NC) substrate to form Ni@NC@MoS₂ hierarchical sub‐microspheres by a simple hydrothermal process. The formed Ni@NC@MoS₂ composites display excellent electrocatalytic activity for HER with an onset overpotential of 18 mV, a low overpotential of 82 mV at 10 mA cm^?2, a small Tafel slope of 47.5 mV dec^?1, and high durability in 0.5 H₂SO₄ solution. The outstanding HER performance of the Ni@NC@MoS₂ catalyst can be ascribed to the synergistic effect of dense catalytic sites on MoS₂ nanosheets with exposed edges and expanded interlayer spacings, and the rapid electron transfer from Ni@NC substrate to MoS₂ nanosheets. The excellent Ni@NC@MoS₂ electrocatalyst promises potential application in practical hydrogen production, and the strategy reported here can also be extended to grow MoS₂ on other nitrogen‐doped carbon encapsulated metal species for various applications.     

3D Nitrogen‐Anion‐Decorated Nickel Sulfides for Highly Efficient Overall Water Splitting

Developing non‐noble‐metal electrocatalysts with high activity and low cost for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of paramount importance for improving the generation of H₂ fuel by electrocatalytic water‐splitting. This study puts forward a new N‐anion‐decorated Ni₃S₂ material synthesized by a simple one‐step calcination route, acting as a superior bifunctional electrocatalyst for the OER/HER for the first time. The introduction of N anions significantly modifies the morphology and electronic structure of Ni₃S₂, bringing high surface active sites exposure, enhanced electrical conductivity, optimal HER Gibbs free‐energy (ΔG_H*), and water adsorption energy change (ΔG_H2O*). Remarkably, the obtained N‐Ni₃S₂/NF 3D electrode exhibits extremely low overpotentials of 330 and 110 mV to reach a current density of 100 and 10 mA cm^?2 for the OER and HER in 1.0 m KOH, respectively. Moreover, an overall water‐splitting device comprising this electrode delivers a current density of 10 mA cm^?2 at a very low cell voltage of 1.48 V. Our finding introduces a new way to design advanced bifunctional catalysts for water splitting.     

Nitrogen Engineering on 3D Dandelion‐Flower‐Like CoS2 for High‐Performance Overall Water Splitting

Searching for highly efficient and stable bifunctional electrocatalysts toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is highly desirable for the practical application of water electrolysis under alkaline electrolyte. Although electrocatalysts based on transition metal sulfides (TMSs) are widely studied as efficient (pre)catalysts toward OER under alkaline media, their HER performances are far less than the state‐of‐the‐art Pt catalyst. Herein, the synthesis of nitrogen doped 3D dandelion‐flower‐like CoS₂ architecture directly grown on Ni foam (N‐CoS₂/NF) is reported that possesses outstanding HER activity and durability, with an overpotential of 28 mV to obtain the current density of 10 mA cm^?2, exceeding almost all the documented TMS‐based electrocatalysts. Density functional theory calculations and experimental results reveal that the d‐band center of CoS₂ could be efficiently tailored by N doping, resulting in optimized adsorption free energies of hydrogen (ΔG_*H) and water , which can accelerate the HER process in alkaline electrolyte. Besides, the resulting N‐CoS₂/NF also displays excellent performance for OER, making it a high‐performance bifunctional electrocatalyst toward overall water splitting, with a cell voltage of 1.50 V to achieve 10 mA cm^?2.     

Oxygen Vacancy–Rich In‐Doped CoO/CoP Heterostructure as an Effective Air Cathode for Rechargeable Zn–Air Batteries

An efficient and low‐cost electrocatalyst for reversible oxygen electrocatalysis is crucial for improving the performance of rechargeable metal?air batteries. Herein, a novel oxygen vacancy–rich 2D porous In‐doped CoO/CoP heterostructure (In‐CoO/CoP FNS) is designed and developed by a facile free radicals–induced strategy as an effective bifunctional electrocatalyst for rechargeable Zn–air batteries. The electron spin resonance and X‐ray absorption near edge spectroscopy provide clear evidence that abundant oxygen vacancies are formed in the interface of In‐CoO/CoP FNS. Owing to abundant oxygen vacancies, porous heterostructure, and multiple components, In‐CoO/CoP FNS exhibits excellent oxygen reduction reaction activity with a positive half‐wave potential of 0.81 V and superior oxygen evolution reaction activity with a low overpotential of 365 mV at 10 mA cm^?2. Moreover, a home‐made Zn–air battery with In‐CoO/CoP FNS as an air cathode delivers a large power density of 139.4 mW cm^?2, a high energy density of 938 Wh kg_Zn^?1, and can be steadily cycled over 130 h at 10 mA cm^?2, demonstrating great application potential in rechargeable metal–air batteries.     

Cation‐Modulated HER and OER Activities of Hierarchical VOOH Hollow Architectures for High‐Efficiency and Stable Overall Water Splitting

Atom‐scale modulation of electronic regulation in nonprecious‐based electrocatalysts is promising for efficient catalytic activities. Here, hierarchically hollow VOOH nanostructures are rationally constructed by partial iron substitution and systematically investigated for electrocatalytic water splitting. Benefiting from the hierarchically stable scaffold configuration, highly electrochemically active surface area, the synergistic effect of the active metal atoms, and optimal adsorption energies, the 3% Fe (mole ratio) substituted electrocatalyst (VOOH‐3Fe) exhibits a low overpotential of 90 and 195 mV at 10 mA cm^?2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media, respectively, superior than the other samples with a different substituted ratio. To the best of current knowledge, 195 mV overpotential at 10 mA cm^?2 is the best value reported for V or Fe (oxy)hydroxide‐based OER catalysts. Moreover, the electrolytic cell employing the VOOH‐3Fe electrode as both the cathode and anode exhibits a cell voltage of 0.30 V at 10 mA cm^?2 with a remarkable stability over 60 h. This work heralds a new pathway to design efficient bifunctional catalysts toward overall water splitting.