Improved Performance of All‐Polymer Solar Cells Enabled by Naphthodiperylenetetraimide‐Based Polymer Acceptor

A new polymer acceptor, naphthodiperylenetetraimide‐vinylene (NDP‐V), featuring a backbone of altenating naphthodiperylenetetraimide and vinylene units is designed and applied in all‐polymer solar cells (all‐PSCs). With this polymer acceptor, a new record power‐conversion efficiencies (PCE) of 8.59% has been achieved for all‐PSCs. The design principle of NDP‐V is to reduce the conformational disorder in the backbone of a previously developed high‐performance acceptor, PDI‐V, a perylenediimide‐vinylene polymer. The chemical modifications result in favorable changes to the molecular packing behaviors of the acceptor and improved morphology of the donor–acceptor (PTB7‐Th:NDP‐V) blend, which is evidenced by the enhanced hole and electron transport abilities of the active layer. Moreover, the stronger absorption of NDP‐V in the shorter‐wavelength range offers a better complement to the donor. All these factors contribute to a short‐circuit current density (J _sc) of 17.07 mA cm^?2. With a fill factor (FF) of 0.67, an average PCE of 8.48% is obtained, representing the highest value thus far reported for all‐PSCs.     

A Narrow‐Bandgap n‐Type Polymer Semiconductor Enabling Efficient All‐Polymer Solar Cells

Currently, n‐type acceptors in high‐performance all‐polymer solar cells (all‐PSCs) are dominated by imide‐functionalized polymers, which typically show medium bandgap. Herein, a novel narrow‐bandgap polymer, poly(5,6‐dicyano‐2,1,3‐benzothiadiazole‐alt‐indacenodithiophene) (DCNBT‐IDT), based on dicyanobenzothiadiazole without an imide group is reported. The strong electron‐withdrawing cyano functionality enables DCNBT‐IDT with n‐type character and, more importantly, alleviates the steric hindrance associated with typical imide groups. Compared to the benchmark poly(naphthalene diimide‐alt‐bithiophene) (N2200), DCNBT‐IDT shows a narrower bandgap (1.43 eV) with a much higher absorption coefficient (6.15 × 10⁴ cm^?1). Such properties are elusive for polymer acceptors to date, eradicating the drawbacks inherited in N2200 and other high‐performance polymer acceptors. When blended with a wide‐bandgap polymer donor, the DCNBT‐IDT‐based all‐PSCs achieve a remarkable power conversion efficiency of 8.32% with a small energy loss of 0.53 eV and a photoresponse of up to 870 nm. Such efficiency greatly outperforms those of N2200 (6.13%) and the naphthalene diimide (NDI)‐based analog NDI‐IDT (2.19%). This work breaks the long‐standing bottlenecks limiting materials innovation of n‐type polymers, which paves a new avenue for developing polymer acceptors with improved optoelectronic properties and heralds a brighter future of all‐PSCs.     

A Chemically Doped Naphthalenediimide‐Bithiazole Polymer for n‐Type Organic Thermoelectrics

The synthesis of a novel naphthalenediimide (NDI)‐bithiazole (Tz2)‐based polymer [P(NDI2OD‐Tz2)] is reported, and structural, thin‐film morphological, as well as charge transport and thermoelectric properties are compared to the parent and widely investigated NDI‐bithiophene (T2) polymer [P(NDI2OD‐T2)]. Since the steric repulsions in Tz2 are far lower than in T2, P(NDI2OD‐Tz2) exhibits a more planar and rigid backbone, enhancing π–π chain stacking and intermolecular interactions. In addition, the electron‐deficient nature of Tz2 enhances the polymer electron affinity, thus reducing the polymer donor–acceptor character. When n‐doped with amines, P(NDI2OD‐Tz2) achieves electrical conductivity (≈0.1 S cm^?1) and a power factor (1.5 µW m^?1 K^?2) far greater than those of P(NDI2OD‐T2) (0.003 S cm^?1 and 0.012 µW m^?1 K^?2, respectively). These results demonstrate that planarized NDI‐based polymers with reduced donor–acceptor character can achieve substantial electrical conductivity and thermoelectric response.     

High‐Performance All‐Polymer Solar Cells Enabled by an n‐Type Polymer Based on a Fluorinated Imide‐Functionalized Arene

A novel imide‐functionalized arene, di(fluorothienyl)thienothiophene diimide (f‐FBTI2), featuring a fused backbone functionalized with electron‐withdrawing F atoms, is designed, and the synthetic challenges associated with highly electron‐deficient fluorinated imide are overcome. The incorporation of f‐FBTI2 into polymer affords a high‐performance n‐type semiconductor f‐FBTI2‐T, which shows a reduced bandgap and lower‐lying lowest unoccupied molecular orbital (LUMO) energy level than the polymer analog without F or with F‐functionalization on the donor moiety. These optoelectronic properties reflect the distinctive advantages of fluorination of electron‐deficient acceptors, yielding “stronger acceptors,” which are desirable for n‐type polymers. When used as a polymer acceptor in all‐polymer solar cells, an excellent power conversion efficiency of 8.1% is achieved without any solvent additive or thermal treatment, which is the highest value reported for all‐polymer solar cells except well‐studied naphthalene diimide and perylene diimide‐based n‐type polymers. In addition, the solar cells show an energy loss of 0.53 eV, the smallest value reported to date for all‐polymer solar cells with efficiency > 8%. These results demonstrate that fluorination of imide‐functionalized arenes offers an effective approach for developing new electron‐deficient building blocks with improved optoelectronic properties, and the emergence of f‐FBTI2 will change the scenario in terms of developing n‐type polymers for high‐performance all‐polymer solar cells.     

Conjugated Donor–Acceptor Terpolymers Toward High‐Efficiency Polymer Solar Cells

The development of conjugated alternating donor–acceptor (D–A) copolymers with various electron‐rich and electron‐deficient units in polymer backbones has boosted the power conversion efficiency (PCE) over 17% for polymer solar cells (PSCs) over the past two decades. However, further enhancements in PCEs for PSCs are still imperative to compensate their imperfect stability for fulfilling practical applications. Meanwhile development of these alternating D–A copolymers is highly demanding in creative design and syntheses of novel D and/or A monomers. In this regard, when being possible to adopt an existing monomer unit as a third component from its libraries, either a D′ unit or an A′ moiety, to the parent D–A type polymer backbones to afford conjugated D–A terpolymers, it will give a facile and cost‐effective method to improve their light absorption and tune energy levels and also interchain packing synergistically. Moreover, the rationally controlled stoichiometry for these components in such terpolymers also provides access for further fine‐tuning these factors, thus resulting in high‐performance PSCs. Herein, based on their unique features, the recent progress of conjugated D–A terpolymers for efficient PSCs is reviewed and it is discussed how these factors influence their photovoltaic performance, for providing useful guidelines to design new terpolymers toward high‐efficiency PSCs.     

Aromatic‐Diimide‐Based n‐Type Conjugated Polymers for All‐Polymer Solar Cell Applications

All‐polymer solar cells (all‐PSCs) have attracted immense attention in recent years due to their advantages of tunable absorption spectra and electronic energy levels for both donor and acceptor polymers, as well as their superior thermal and mechanical stability. The exploration of the novel n‐type conjugated polymers (CPs), especially based on aromatic diimide (ADI), plays a vital role in the further improvement of power conversion efficiency (PCE) of all‐PSCs. Here, recent progress in structure modification of ADIs including naphthalene diimide (NDI), perylene diimide (PDI), and corresponding derivatives is reviewed, and the structure–property relationships of ADI‐based CPs are revealed.     

Recent Advances in Polymer Solar Cells: Realization of High Device Performance by Incorporating Water/Alcohol‐Soluble Conjugated Polymers as Electrode Buffer Layer

This Progress Report highlights recent advances in polymer solar cells with special attention focused on the recent rapid‐growing progress in methods that use a thin layer of alcohol/water‐soluble conjugated polymers as key component to obtain optimized device performance, but also discusses novel materials and device architectures made by major prestigious institutions in this field. We anticipate that due to drastic improvements in efficiency and easy utilization, this method opens up new opportunities for PSCs from various material systems to improve towards 10% efficiency, and many novel device structures will emerge as suitable architectures for developing the ideal roll‐to‐roll type processing of polymer‐based solar cells.     

Isomery‐Dependent Miscibility Enables High‐Performance All‐Small‐Molecule Solar Cells

Nonfullerene polymer solar cells develop quickly. However, nonfullerene small‐molecule solar cells (NF‐SMSCs) still show relatively inferior performance, attributing to the lack of comprehensive understanding of the structure–performance relationship. To address this issue, two isomeric small‐molecule acceptors, NBDTP‐F_out and NBDTP‐F_in, with varied oxygen position in the benzodi(thienopyran) (BDTP) core are designed and synthesized. When blended with molecular donor BDT3TR‐SF, devices based on the two isomeric acceptors show disparate photovoltaic performance. Fabricated with an eco‐friendly processing solvent (tetrahydrofuran), the BDT3TR‐SF:NBDTP‐F_out blend delivers a high power conversion efficiency of 11.2%, ranked to the top values reported to date, while the BDT3TR‐SF:NBDTP‐F_in blend almost shows no photovoltaic response (0.02%). With detailed investigations on inherent optoelectronic processes as well as morphological evolution, this performance disparity is correlated to the interfacial tension of the two combinations and concludes that proper interfacial tension is a key factor for effective phase separation, optimal blend morphology, and superior performance, which can be achieved by the “isomerization” design on molecular acceptors. This work reveals the importance of modulating the materials miscibility by interfacial‐tension‐oriented molecular design, which provides a general guideline toward efficient NF‐SMSCs.     

Directly Cross-Linked Conjugated Polymer Donor Enables Efficient Polymer Solar Cells with Extraordinary Mechanical Robustness

A cross-linking strategy can result in a three-dimensional network of interconnected chains for the copolymers, thereby improving their mechanical performance. In this work, a series of cross-linked conjugated copolymers, named PC2, PC5, and PC8, constructed with different ratios of monomers are designed and synthesized. For comparison, a random linear copolymer, PR2 is also synthesized based on the similar monomers. When blended with Y6 acceptor, the cross-linked polymers PC2, PC5, and PC8-based polymer solar cells (PSCs) achieve superior power conversion efficiencies (PCEs) of 17.58%, 17.02%, and 16.12%, respectively, which are higher than that (15.84%) of the random copolymer PR2-based devices. Moreover, the PCE of PC2:Y6-based flexible PSC retains ≈88% of the initial efficiency value after 2000 bending cycles, overwhelming the PR2:Y6-based device with the remaining 12.8% of the initial PCE. These results demonstrate that the cross-linking strategy is a feasible and facile approach to developing high-performance polymer donors for the fabrication of flexible PSCs.     

Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells

All‐inorganic perovskites are considered to be one of the most appealing research hotspots in the field of perovskite photovoltaics in the past 3 years due to their superior thermal stability compared to their organic–inorganic hybrid counterparts. The power‐conversion efficiency has reached 17.06% and the number of important publications is ever increasing. Here, the progress of inorganic perovskites is systematically highlighted, covering materials design, preparation of high‐quality perovskite films, and avoidance of phase instabilities. Inorganic perovskites, nanocrystals, quantum dots, and lead‐free compounds are discussed and the corresponding device performances are reviewed, which have been realized on both rigid and flexible substrates. Methods for stabilization of the cubic phase of low‐bandgap inorganic perovskites are emphasized, which is a prerequisite for highly efficient and stable solar cells. In addition, energy loss mechanisms both in the bulk of the perovskite and at the interfaces of perovskite and charge selective layers are unraveled. Reported approaches to reduce these charge‐carrier recombination losses are summarized and complemented by methods proposed from our side. Finally, the potential of inorganic perovskites as stable absorbers is assessed, which opens up new perspectives toward the commercialization of inorganic perovskite solar cells.