Folic‐Acid‐Targeted Self‐Assembling Supramolecular Carrier for Gene Delivery

A targeting gene carrier for cancer‐specific delivery was successfully developed through a “multilayer bricks‐mortar” strategy. The gene carrier was composed of adamantane‐functionalized folic acid (FA‐AD), an adamantane‐functionalized poly(ethylene glycol) derivative (PEG‐AD), and β‐cyclodextrin‐grafted low‐molecular‐weight branched polyethylenimine (PEI‐CD). Carriers produced by two different self‐assembly schemes, involving either precomplexation of the PEI‐CD with the FA‐AD and PEG‐AD before pDNA condensation (Method A) or pDNA condensation with the PEI‐CD prior to addition of the FA‐AD and PEG‐AD to engage host–guest complexation (Method B) were investigated for their ability to compact pDNA into nanoparticles. Cell viability studies show that the material produced by the Method A assembly scheme has lower cytotoxicity than branched PEI 25 kDa (PEI‐25KD) and that the transfection efficiency is maintained. These findings suggest that the gene carrier, based on multivalent host–guest interactions, could be an effective, targeted, and low‐toxicity carrier for delivering nucleic acid to target cells.     

Self‐assembling amphiphilic PEGylated block copolymers obtained through RAFT polymerization for drug‐delivery applications

In this work, ring‐opening polymerization and reversible addition‐fragmentation chain transfer polymerization (RAFT) have been employed for the production of block copolymers where the backbone is brushed with poly(ethylene glycol) (PEG) and polyester chains. Because of their amphiphilic properties, they are able to self‐assemble in water, forming micelles. Molecular dynamics simulations have been accomplished to study the behavior of the copolymer single chain in water, and the self‐assembly properties have been characterized and correlated to the copolymer structure in terms of critical micellar concentration and particle size. As a proof of their flexibility, these materials have been employed for the production of polymer–lipid hybrid nanoparticles with tunable dimensions (from 120 to 260 nm) adopted for the controlled release of anticancer compounds (paclitaxel and curcumin). © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43084.     

A Self‐Healing PAM/CMHPG System for Unconventional Reservoir Stimulation

A hybrid chemically and physically linked polyacrylamide (PAM)/carboxymethyl hydroxypropyl guar gum (CMHPG) system is prepared via a fast and controllable one‐pot strategy. Due to the synergetic effect of the non‐covalent interactions between chains, these systems show improved, balanced mechanical properties. The apparent morphology, storage modulus G′, and loss modulus G″ show that these systems have rapid and almost full recovery ability (the self‐healing efficiency can reach 95%) with several hydrogen‐bonding interactions between two networks. This self‐healing property can cover the shortage of G′, G″, and viscosity loss at high shear force, which will help the system keep enough viscosity to create fractures or carry proppants during the whole fracturing process. Meanwhile, the self‐healing fracturing fluid can be broken easily and flow back to surface with little damage to the fracture conductivity, indicating great potential in unconventional reservoir which is sensitive to the fracturing fluid damage.     

Synthesis of chitosan‐graft‐β‐cyclodextrin for improving the loading and release of doxorubicin in the nanopaticles

Chitosan‐graft‐β‐cyclodextrin (CS‐g‐β‐CD) copolymer was synthesized by conjugating β‐cyclodextrins to chitosan molecules through click chemistry. The copolymer structure was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). CS‐g‐β‐CD/CMC nanoparticles were prepared by a polyelectrolyte complexation process in aqueous solution between CS‐g‐β‐CD copolymer and carboxymethyl chitosan (CMC), which was used to load anticancer drug (Doxorubicin hydrochloride, DOX·HCl) with hydrophobic group. The particle size, surface charge, zeta potential, and morphology of the nanoparticles were characterized with dynamic light scattering. The drug loading efficiency and in vitro release of DOX·HCl of the nanoparticles were measured by ultraviolet spectrophotometer. The results demonstrated that the size, surface charge and drug loading efficiency of the nanoparticles could be modulated by the fabrication conditions. The drug loading efficiency of CS‐g‐β‐CD/CMC nanoparticles was improved from 52.7% to 88.1% because of the presence of β‐CD moieties with hydrophobic cavities, which can form inclusion complexes with the drug molecules. The in vitro release results showed that the CS‐g‐β‐CD/CMC nanoparticles released DOX·HCl in a controlled manner, importantly overcoming the initial burst effect. These nanoparticles possess much potential to be developed as anticancer drug delivery systems, especially those drugs with hydrophobic group. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41034.     

Self‐assembled micelles prepared from poly(ɛ‐caprolactone)–poly(ethylene glycol) and poly(ɛ‐caprolactone/glycolide)–poly(ethylene glycol) block copolymers for sustained drug delivery

A series of poly(?‐caprolactone)–poly(ethylene glycol) (PCL‐PEG) and poly(?‐caprolactone/glycolide)–poly(ethylene glycol) [P(CL/GA)‐PEG] diblock copolymers were prepared by ring‐opening polymerization of ?‐caprolactone or a mixture of ?‐caprolactone and glycolide using monomethoxy PEG (mPEG) as macroinitiator and Sn(Oct)₂ as catalyst. The resulting copolymers were characterized using ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Copolymer micelles were prepared using the nanoprecipitation method. The morphology of the micelles was spherical or worm‐like as revealed by transmission electron microscopy, depending on the copolymer composition and the length of the hydrophobic block. Introduction of the glycolide component, even in small amounts (CL/GA = 10), disrupted the chain structure and led to the formation of spherical micelles. Interestingly, the micelle size decreased with the encapsulation of paclitaxel. Micelles prepared from mPEG5000‐derived copolymers exhibited better drug loading properties and slower drug release than those from mPEG2000‐derived copolymers. Drug release was faster for copolymers with shorter PCL blocks than for those with longer PCL chains. The introduction of glycolide moieties enhanced drug release, but the overall release rate did not exceed 10% in 30 days. In contrast, drug release was enhanced in acidic media. Therefore, these bioresorbable micelles and especially P(CL/GA)‐PEG micelles with excellent stability, high drug loading content, and prolonged drug release could be promising for applications as drug carriers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45732.     

Loading of Drug‐Polymer Matrices in Microreservoirs for Oral Drug Delivery

For major advances in microfabricated drug delivery systems (DDS), fabrication methods with high throughput using biocompatible polymers are required. Once these DDS are fabricated, loading of drug poses a significant challenge. Here, hot punching is presented as an innovative method for drug loading in microfabricated DDS. The microfabricated DDS are microcontainers fabricated in photoresist SU‐8 and biopolymer poly‐l ‐lactic‐acid (PLLA). Furosemide (F) drug is embedded in poly‐ε‐caprolactone (PCL) polymer matrix. This F‐PCL drug polymer matrix is loaded in SU‐8 and PLLA microcontainers using hot punching with >99% yield. Thus, it is illustrated that hot punching allows high‐throughput, parallel loading of 3D polymer microcontainers with drug‐polymer matrices in a single process step.

     

Development of a Self‐Assembled Peptide/Methylcellulose‐Based Bioink for 3D Bioprinting

The introduction of 3D bioprinting to fabricate living constructs with tailored architecture has provided a new paradigm for biofabrication, with the potential to overcome several drawbacks of conventional scaffold‐based tissue regeneration strategies. Hydrogel‐based materials are suitable candidates regarding cell biocompatibility but often display poor mechanical properties. Self‐assembling peptides are a promising source of biomaterials to be used as 3D scaffolds based on their similarity to extracellular matrices (structurally and mechanically). In this study, an advanced bioink for biofabrication is presented based on the optimization of a RAD16‐I‐based biomaterial. The strategy followed to build 3D predefined structures by 3D printing is based on an enhancement of bioink viscosity by adding methylcellulose (MC) to a RAD16‐I solution. The resultant constructs display high shape fidelity and stability and embedded human mesenchymal stem cells present high viability after 7 days of culture. Moreover, cells are also able to differentiate to the adipogenic lineage, suggesting the suitability of this novel biomaterial for soft tissue engineering applications.     

Development of ultrasmall chitosan/succinyl β‐cyclodextrin nanoparticles as a sustained protein‐delivery system

In this article, we introduce a new method for preparing ultrasmall chitosan (CS)/succinyl β‐cyclodextrin (SCD) nanoparticles (NPs) intended for loading bovine serum albumin (BSA) as a model protein. The proposed method is based on the complex coacervation technique followed by ionotropic gelation with tripolyphosphate. SCD, an anionic derivative of cyclodextrin, was synthesized and used in CS‐based NPs to enhance the entrapment efficiency of BSA. The results show that with this approach, ultrasmall, compact, and neutralized NPs with a mean particle size near 30 nm were obtained. A high degree of protein entrapment in the NPs led to a significant improvement in the BSA release profile with a low initial burst release (ca. 3% w/v of the initially loaded BSA) and a sustained release over time. This enabled a suitable nanocarrier for long‐term protein delivery (30% release over 120 h). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39648.     

Self‐assembling chitosan hydrogel: A drug‐delivery device enabling the sustained release of proteins

The development of a self‐assembling hydrogel, prepared from maleimide‐modified and thiolated chitosan (CS), is described. Under mild reaction conditions, the natural CS polymer was coupled with either maleimide or sulfhydryl moieties in a one‐step synthesis. Subsequently, these CS polymers spontaneously formed a covalently crosslinked CS hydrogel when mixed. The three‐dimensional network structure was visualized with scanning electron microscopy. The swelling and degradation behavior was evaluated, and viscosity measurements were conducted. The gel was loaded with the model protein albumin, and prolonged release was achieved. These properties were preserved after lyophilization and rehydration. This makes the hydrogel a promising scaffold for biological wound dressings for the treatment of chronic wounds. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45638.     

Testing for Change‐Points in Long‐Range Dependent Time Series by Means of a Self‐Normalized Wilcoxon Test

We propose a testing procedure based on the Wilcoxon two‐sample test statistic in order to test for change‐points in the mean of long‐range dependent data. We show that the corresponding self‐normalized test statistic converges in distribution to a non‐degenerate limit under the hypothesis that no change occurred and that it diverges to infinity under the alternative of a change‐point with constant height. Furthermore, we derive the asymptotic distribution of the self‐normalized Wilcoxon test statistic under local alternatives, that is, under the assumption that the height of the level shift decreases as the sample size increases. Regarding the finite sample performance, simulation results confirm that the self‐normalized Wilcoxon test yields a consistent discrimination between hypothesis and alternative and that its empirical size is already close to the significance level for moderate sample sizes.     

Synthesis of N‐benzyl‐O‐carboxymethylchitosan and application in the solubilization enhancement of a poorly water‐soluble drug (triamcinolone)

N‐Benzyl‐O‐carboxymethyl chitosan (OCChB) was synthesized through a reaction of O‐carboxymethylchitosan (OCCh) and benzaldehyde by the reductive amination method. The chemical structures and physical properties of the derivatives were confirmed by Fourier transform infrared spectroscopy and ¹H‐NMR. The cytotoxicity of the polymers was tested by MTT (3‐[4,5‐dimethylthiazol‐2‐yl]‐2,5‐diphenyltetrazolium bromide) assay at concentrations ranging from 0.01 to 1000 μg/mL. The substitution degrees of the derivatives, calculated by ¹H‐NMR, were 12 and 53% for OCChB1 and OCChB2, respectively. The results show that the derivatives were not toxic at 1000 μg/mL and could decrease the surface tension by concentration on the system surface compared with OCCh. Because of this property, OCChB was applied as a solubility enhancer for triamcinolone (TC), a poorly water‐soluble drug. The polymer solutions at 1.0 mg/mL increased the TC solubility up to 3.5 times for OCChB1 and 5.0 times for OCChB2 compared with its solubility in water. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of emulsifiers on the preparation of food‐grade oil‐in‐water emulsions using a straight‐through extrusion filter

This paper describes the preparation characteristics of food‐grade soybean oil‐in‐water (O/W) emulsions using a novel straight‐through extrusion filter, named a silicon straight‐through microchannel (MC). Polyglycerol fatty acid ester (PGFE), polyoxyethelene sorbitan monolaurate (Tween 20), and sucrose fatty acid ester were tested as emulsifiers. Optical observations of the emulsification process exhibited that monodisperse oil droplets were stably formed from an oblong straight‐through MC for PGFE and Tween 20. The effect of the emulsifier on the straight‐through MC emulsification behavior is discussed. The selected PGFE‐ and Tween 20‐containing systems enabled us to prepare monodisperse O/W emulsions with droplet diameters of 38—39 μm and coefficients of variation below 3% using an oblong straight‐through MC with a 16 μm‐equivalent channel diameter.     

Development of pH‐sensitive nanogels for cancer treatment using crosslinked poly(aspartic acid‐graft‐imidazole)‐block‐poly(ethylene glycol)

pH‐sensitive nanogels (NGs) based on poly(aspartic acid‐graft‐imidazole)‐poly(ethylene glycol) were developed using linear PEG with different molecular weights (2000 and 4000 Da) as crosslinkers. The pH‐sensitive NGs showed reversible size changes during continuously alternating pH changes. The anticancer treatment potential of pH‐sensitive NGs was studied using a model drug, irinotecan (IRI). IRI‐loaded NGs (ILNs) showed different drug release kinetics in acidic versus neutral pH, in addition to pH‐dependent cytotoxicity. Due to its longer crosslinker, ILN 4 (crosslinked with PEG 4000) showed faster IRI release and a greater magnitude of IRI release than ILN 2 (crosslinked with PEG 2000), resulting in greater cytotoxicity against HCT 116 colorectal cancer cells. These pH‐sensitive NGs could potentially be used in cancer treatment by mediating the accumulation and release of IRI from ILNs in the acidic tumor environment and by reducing systemic toxicity due to reversible swelling–shrinkage. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46268.     

Delivery of bupivacaine included in poly(acrylamide‐co‐monomethyl itaconate) hydrogels as a function of the pH swelling medium

Copolymeric hydrogels of poly(acrylamide‐co‐monomethyl itaconate) (A/MMI) crosslinked with N,N′‐methylenbisacrylamide (NBA) were synthesized as devices for the controlled release of bupivacaine (Bp). Two compositions of the copolymer, 60A/40MMI and 75A/25MMI, were studied. A local anesthetic was included in the feed mixture of polymerization (2–8 mg Bp/tablet) and by immersion of the copolymeric tablets in an aqueous solution of the drug. A very large amount of Bp (36–38 mg Bp/tablet) was included in the gels by sorption due to interactions between the drug and the side groups of the hydrogels. Swelling and drug release were in accordance with the second Fick's law at the first stages of the processes. The swelling behavior of these copolymers depended on the pH of the medium. The equilibrium swelling degree (W_∞) was larger at pH 7.5 (W_∞ ≈ 90 wt %) than at pH 1.5 (W_∞ ≈ 52–64 wt %) due to the ionization of the side groups of the copolymer. Release of the drug also depended on the pH of the swelling medium; at pH 7.5, about 60% of the included drug was released, and at pH 1.5, about 80% was released. Bp release was controlled by the comonomer composition of the gels, their drug‐load, and the pH of the swelling medium. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 327–334, 2002     

Controlled delivery of growth‐hormone‐releasing peptide 6 from the poly(lactic‐co‐glycolic acid)–poly(ethylene glycol)–poly(lactic‐co‐glycolic acid) copolymer and the effect of a growth‐hormone‐releasing peptide 6–copolymer hydrogel on the growth of rex rabbits

Growth‐hormone‐releasing peptide 6 (GHRP‐6) plays an important role in animal growth. However, there have been few studies focusing on the effect of GHRP‐6 on animal growth through controlled release systems. We synthesized the poly(lactic‐co‐glycolic acid) (PLGA)–poly(ethylene glycol) (PEG)–PLGA copolymer to investigate its controlled released effect on GHRP‐6 in vitro and to study the effect of a GHRP‐6–copolymer hydrogel on the growth of rex rabbits. The copolymer was synthesized with ring‐opening copolymerization and characterized by ¹H‐NMR. The interaction between GHRP‐6 and the copolymer was characterized by Fourier transform infrared spectroscopy and X‐ray diffraction. The body weight, serum level of insulin‐like growth factor 1 (IGF‐1), and hair coat quality were studied in rex rabbits. The results show that hydrogen bonds formed between the N? H group in GHRP‐6 and the C?O group in the copolymer. The release mechanism of GHRP‐6 was a combination of a diffusion‐controlled mechanism and an erosion‐controlled mechanism in the copolymer. The serum level of IGF‐1, hair coat quality, and body weight were all significantly higher in the GHRP‐6–copolymer hydrogel group than in the other groups. These results indicate that the copolymer effectively controlled the release of GHRP‐6. In addition, the GHRP‐6–copolymer hydrogel increased the synthesis of IGF‐1 for a prolonged period and, thereby, increased the rex rabbits' growth and hair coat quality. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40185.     

Characterization of Magnesium Orotate‐Loaded Chitosan Polymer Nanoparticles for a Drug Delivery System

The drug release properties of magnesium orotate (MgOr) encapsulated in the chitosan (CS) cavity and the complexation behavior between MgOr and CS were investigated. The MgOr‐loaded CS nanoparticles (MgOrCSNPs) were characterized by differential scanning calorimetry, Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy with energy‐dispersive X‐ray spectroscopy. MgOr was successfully encapsulated into the CS cavity. Results with 3‐(4,5‐dimethylthiazol‐2‐yl)2,5‐diphenyl tetrazolium bromide indicated that MgOrCSNPs retained their cytotoxic activity against the liver cancer cell line (HepG2) and breast cancer cell line (MCF‐7), and low toxicity against the human cell line (3T3) and human retinal epithelial cell line (ARPE‐19).     

Fabrication of thermoresponsive,core‐crosslinked micelles based on poly[N‐isopropyl acrylamide‐co‐3‐(trimethoxysilyl)propylmethacrylate]‐b‐poly{N‐[3‐(dimethylamino)propyl]methacrylamide} for the codelivery of doxorubicin and nucleic acid

Thermoresponsive amphiphilic copolymer, poly[N‐isopropyl acrylamide‐co‐3‐(trimethoxysilyl)propylmethacrylate]‐b‐poly{N‐[3‐(dimethylamino)propyl]methacrylamide} with a branched structure was designed and synthesized by consecutive reversible addition–fragmentation chain‐transfer polymerization. The further hydrolysis of trimethoxysilyl functions in 3‐(trimethoxysilyl) propyl methacrylate units led to the fabrication of core‐crosslinked (CCL) micelles with silica crosslinks at temperatures above the lower critical solution temperature of the poly(N‐isopropyl acrylamide) block. The thermally induced structural and morphological changes of the CCL micelles in aqueous solution were investigated by transmission electron microscopy and ¹H‐NMR analyses. The resulting CCL micelles were further explored as nanocarriers for the codelivery of an anticancer drug and nucleic acid for enhanced therapeutic efficacy. The CCL micelles effectively condensed the nucleic acid and mediated higher gene transfer in the presence of serum than in serum‐free transduction. A cytotoxicity study revealed that whereas the pure CCL micelles exhibited unapparent cytotoxicity, the codelivery of p53 and doxorubicin with the CCL micelle formulation resulted in better treatment efficiency than sole chemotherapy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41752.     

Erythro–Magneto–HA–Virosome: A Bio-Inspired Drug Delivery System for Active Targeting of Drugs in the Lungs

Over the past few decades, finding more efficient and selective administration routes has gained significant attention due to its crucial role in the bioavailability, absorption rate and pharmacokinetics of therapeutic substances. The pulmonary delivery of drugs has become an attractive target of scientific and biomedical interest in the health care research area, as the lung, thanks to its high permeability and large absorptive surface area and good blood supply, is capable of absorbing pharmaceuticals either for local deposition or for systemic delivery. Nevertheless, the pulmonary drug delivery is relatively complex, and strategies to mitigate the effects of mechanical, chemical and immunological barriers are required. Herein, engineered erythrocytes, the Erythro–Magneto–Hemagglutinin (HA)–virosomes (EMHVs), are used as a novel strategy for efficiently delivering drugs to the lungs. EMHV bio-based carriers exploit the physical properties of magnetic nanoparticles to achieve effective targeting after their intravenous injection thanks to an external magnetic field. In addition, the presence of hemagglutinin fusion proteins on EMHVs’ membrane allows the DDS to anchor and fuse with the target tissue and locally release the therapeutic compound. Our results on the biomechanical and biophysical properties of EMHVs, such as the membrane robustness and deformability and the high magnetic susceptibility, as well as their in vivo biodistribution, highlight that this bio-inspired DDS is a promising platform for the controlled and lung-targeting delivery of drugs, and represents a valuable alternative to inhalation therapy to fulfill unmet clinical needs.     

Synthesis of a novel pH‐sensitive polyurethane–alginate blend with poly(ethylene terephthalate) waste for the oral delivery of protein

With the aim of using poly(ethylene terephthalate) (PET) waste for the synthesis of a value added product, we prepared polyurethane (PU) from bishydrohxyethylene terephthalate (BHET), a byproduct obtained from the glycolysis of PET. Biodegradable, water‐swelling PU was synthesized by the reaction of BHET, hexamethylene diisocyanate, and poly(ethylene glycol) (PEG). Both BHET and PU were characterized by Fourier transform infrared spectroscopy, and the formation of PU was further confirmed by NMR analysis. The swelling behavior of PU in water was examined in terms of the various molecular weights of PEG. Semi‐interpenetrating network beads of PU and sodium alginate were prepared with calcium chloride (CaCl₂) as a crosslinker to attain a pH sensitivity for successful oral protein/drug delivery. Bovine serum albumin (BSA) was used as a model protein. The pH‐responsive swelling behavior and protein (BSA) release kinetics in different pH media corresponding to the gastrointestinal tract (pH 1.2 and 7.4) were investigated. The degree of swelling in the case of the PU–alginate beads at pH 1.2 was found to be at a minimum, whereas the degree of swelling was significantly elevated (1080%) at pH 7.4. This substantiated the pH sensitivity of the polymeric beads with a minimum loss of encapsulated protein in the stomach and the almost complete release of encapsulated protein in the intestine. This revealed good opportunities for oral protein/drug delivery with a polymer derived from waste PET. Moreover, the fungal biodegradation study confirmed its compatibility with the ecological system. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40650.