随机波束研究超宽带室内多径信道特性

从随机桥过程出发引入随机波束概念,使用随机波束研究超宽带（UWB）室内多径信道的传播特性.将UWB信号多径传播轨迹视作随机过程的样本,得到建模多径信道传播特性的随机波束.使用随机波束构建UWB信道的多径传播模型,并给出使用随机波束方法分析UWB室内多径信道特性的算法.使用该信道模型对实际传播环境进行仿真分析,并与其它建模UWB多径信道的方法进行了比较.仿真得到的UWB信道的功率延迟分布特性与实验测量的结果非常一致,证明此方法的有效性.     

随机桥过程分析街道拐角的无线传播特性

使用随机桥过程研究街道拐角的小尺度衰落和大尺度传播的特性.首先介绍模型,随机桥过程的理论基础,从随机桥过程引入随机射线的概念,利用随机射线建立无线信道分析街道拐角的多径传播特性和大尺度传播特性.然后给出信道的时延分布、多径分量的幅度特性、功率延迟分布,接收机接收波的到达角分布等多径特性参数,并给出路径损耗.仿真结果与参考文献中无线信道测量结果吻合较好,表明使用随机桥过程可以有效地分析街道拐角的无线传播特性.     

Modeling the indoor MIMO wireless channel

This paper demonstrates the ability of a physically based statistical multipath propagation model to match capacity statistics and pairwise magnitude and phase distributions of measured 4 × 4 and 10 × 10 narrow-band multiple-input multiple-output data (MIMO) at 2.4 GHz. The model is compared to simpler statistical models based on the multivariate complex normal distribution with either complex envelope or power correlation. The comparison is facilitated by computing channel element covariance matrices for fixed sets of multipath statistics. Multipolarization data is used to demonstrate a simple method for modeling dual-polarization arrays     

超宽带室内多径信道随机分析模型

使用随机分析方法研究超宽带(UWB)室内多径信道.从UWB信号的基本传播特性出发构建随机分析模型的物理基础.假设UWB信号的多径分量在信道中的传播轨迹是某个随机过程的样本,把UWB信号在信道中传播时发生的传播损耗,和与散射体发生碰撞产生的损耗分开,建立UWB室内多径信道的随机分析模型,包括完全随机的布朗桥模型和有约束的布朗桥模型.使用有约束的布朗桥模型对假设的有8个散射体的不完全随机分布室内环境,以及有金属网格玻璃门反射的走廊环境进行仿真,得到了具有明显成簇现象的UWB信道的功率延迟分布.仿真结果与已公布的UWB信道实测结果具有很好的相似性.     

矩阵随机过程在短程无线信道空时特性建模中的应用

使用矩阵随机过程对短程无线信道的空时特性进行研究。以随机矩阵的列向量描述信道的仰角自由度,行向量描述信道的水平角自由度。使用自由布朗桥过程产生的样本描述无线信道中的多径分量的传播轨迹,在一定的映射规则下可以得到反映无线信道空时特性冲激响应的传统模型和矩阵随机过程模型。对无线信道的空时特性进行了仿真分析,仿真结果表明,自由布朗桥过程所描述的完全随机的约束环境中,多径分量的波达方向在仰角和水平角维度上显示出一定的局部偏好性。     

室内走廊环境毫米波OAM信道特性分析与统计建模

针对自由空间传播模型仅能描述自由空间场景下携带轨道角动量(OAM)的涡旋信道传播特性,以及确定性稀疏多径涡旋信道模型严格依赖于传播环境而不能准确刻画真实多径场景下OAM信道传播特性的问题,该文提出毫米波OAM多径信道统计建模方法。在室内走廊环境下构建基于均匀圆形天线阵列(UCA)的OAM辐射传输系统,基于光学射线理论与UCA辐射特性,建立OAM多径信道模型。结果表明,在毫米波频段均匀分布和Nakagami-m分布能够准确地表征室内走廊多径环境下的OAM信道波前相位和幅度,视距(LoS)和非视距(NLoS)传播条件下传播距离较大时信道幅度服从瑞利分布,视距传播条件下传播距离较小时信道幅度服从莱斯分布。     

A channel model for multipath interference on terrestrialline-of-sight digital radio

A comprehensive system model for characterizing the effects of multipath propagation on digital radio systems in the 4-6-GHz band is shown in this paper. The effects of terrain-induced multipath propagation in the presence of atmospheric anomalies are studied using data from experimental microwave links in the field and in the laboratory. This technique, which treats multipath propagation as digital signal distortions caused by interference from ground reflections, has not been shown previously. A forward multipath propagation model is used to identify the critical propagation parameters for a quadrature amplitude modulated (QAM) signal. A normalized two-ray channel model is developed to approximate the frequency response produced by interference from a ground reflection in a narrow band. The effectiveness of this channel model is evaluated using measured data from the test radio link in the laboratory and in the field     

短程脉冲无线信道特性仿真与分析

利用仿真语言对短程脉冲无线信道进行仿真研究。考虑短程脉冲无线传播环境为具有某一密度的随机分布的散射体,在一种理想情况下,信道传播环境表现为一个渗透网格。利用仿真语言仿真短程脉冲无线信道中多径分量的传播轨迹,通过脉冲无线信道的随机模型对短程脉冲无线信道特性进行仿真分析,仿真结果表明：利用该模型对短程脉冲无线信道仿真是有效的。     

A new stochastic spatio-temporal propagation model (SSTPM) formobile communications with antenna arrays

In order to evaluate the performance of third-generation mobile communication systems, radio channel models are required. The models should be capable of handling nonstationary scenarios with dynamic evolution of multipath. In this context and due to the introduction of advanced antenna systems to exploit the spatial domain, a further expansion is needed in order to include the nonstationary characteristics of the channel. In an attempt to solve these problems, this paper presents a new stochastic spatio-temporal propagation model. The model is a combination of the geometrically-based single reflection and the Gaussian wide-sense stationary uncorrelated scattering models, and is further enhanced in order to be able to handle nonstationary scenarios. The probability density functions of the number of multipath components, the scatterers' lifetime, and the angle of arrival are calculated to support these features. The input parameters of the model are based on results from measurement campaigns published in the open literature     

Propagation Properties of Radio Wave in Multipath Scattering Mobile Channel

1IntroductionAgoodunderstandingofthepropagationPropellesoftheurbanndcrocellularradiotransmissionchannelisveryimpo~tforthedesignofmobileradioandcordlesstelephonesystems.ThechannelbehaviorinurbanndcrocellsisdetenninedbyPropagationofrwhowavesinthetransmissionenvirolllnent.Typicalwavephenomenalikescattering,difhachon,andabsorphonbyPhysicalstIUctUresintheenvironmentSleadtoadiffusionofa~saltteddigitalsignalwaveintoacontinuousdistribuhonofpnalwaves.Obviously,theseeffeCtSdependonthegeometricalande…     

A stochastic multipath channel model including path directions for indoor environments

A novel stochastic channel model for the indoor propagation channel is presented. It is especially for, but not limited to future communication systems with multiple antennas like space division multiple access (SDMA), spatial filtering for interference reduction (SFIR), or multiple-input/multiple-output (MIMO). The model is designed for indoor scenarios, straight forward extendable to urban environments. It is based on physical wave propagation. The new approach describes the channel by multipath components, each characterized by its transfer matrix (including loss), delay, direction of arrival, and departure. The appearance and disappearance of multipath components over time is modeled as a birth and death process, a marked Poisson process. This enables first-time the correct modeling of spatial and temporal correlations. In each modeling step, path properties change according to the motion of transmitter and receiver. The changing delay times of propagation paths yield a realistic Doppler behavior of the channel. Deterministic ray tracing results are used to produce the huge data sets required for the statistical evaluation of the parameters of the proposed model. This method enables an automated parameter extraction for new environments or frequencies. The ray tracing tool has been verified by narrowband, wideband, and directional channel measurements. The novel stochastic spatial channel model allows the simulation of third-generation broadband radio systems including arbitrary antenna configurations and patterns. System simulations for the bit-error rate of radio links can be performed including intelligent antenna configurations like SDMA, SFIR, or MIMO. Furthermore, the capacity of complete systems can be investigated.     

Multipath propagation model for line-of-sight street microcells inurban area

This paper proposes a multipath propagation model for line-of-sight (LOS) street microcells with building roof base sites (BS) in urban areas, Multipath propagation characteristics are of great importance in evaluating the performance of digital systems and designing wireless links. Typical delay profiles are measured to clarify their statistical characteristics in LOS street microcells. The channel sounder used is a sliding correlator with 30-Mb/s PN code and a center frequency of 2.6 GHz. The measurements clarify the features of delay profile and mean RMS delay spread. The proposed delay profile model explains one plausible mechanism of multipath propagation. The delay profiles calculated using the model agreed well with the measured profiles. Furthermore, the factors influencing the RMSs delay spread are investigated, and the regression equation of medium RMS delay spread on a sidewalk is established. The proposed model can evaluate the transmission characteristics of wireless digital communication systems in multipath propagation environments     

Evaluation and verification of the VHF/UHF propagation channelbased on a 3-D-wave propagation model

This paper is intended to increase and improve the knowledge concerning the characterization of digital VHF/UHF communication channels. This characterization of the propagation channel is based on the field strength-delay-spectrum (FDS) of the three-dimensional (3-D) multipath wave propagation. A statistical superposition of the predicted multipath signals yields the probability density function of the narrowband signal and the averaged channel impulse response of the wideband propagation channel. Thereof, the relevant parameters, e.g., standard deviations, mean values, delay spread, and correlation coefficients, are derived both in time and frequency domain. The angles-of-arrival of the multipath signals are used to calculate the Doppler spectra of moving receivers for the characterization the time-variant properties of the propagation channel. In total, a rather complete summary of derivations, algorithms and characteristics of the VHF/UHF propagation channel is presented. Narrowband and wideband measurements are included for verification     

微蜂窝多径散射环境中的电波传播特性分析

从多径色散信道的特征分析出发，采用菲涅耳区原理和射线方法建立起了城市微区多径散射环境中移动无线信道的等效物理模型，并在此基础上对移动无线电波的传播     

Outdoor-to-Indoor Office MIMO Measurements and Analysis at 5.2 GHz

The outdoor-to-indoor wireless propagation channel is of interest for cellular and wireless local area network applications. This paper presents the measurement results and analysis based on our multiple-input-multiple-output (MIMO) measurement campaign, which is one of the first to characterize the outdoor-to-indoor channel. The measurements were performed at 5.2 GHz; the receiver was placed indoors at 53 different locations in an office building, and the transmitter was placed at three "base station" positions on a nearby rooftop. We report on the root-mean-square (RMS) angular spread, building penetration, and other statistical parameters that characterize the channel. Our analysis is focused on three MIMO channel assumptions often used in stochastic models. 1) It is commonly assumed that the channel matrix can be represented as a sum of a line-of-sight (LOS) contribution and a zero-mean complex Gaussian distribution. Our investigation shows that this model does not adequately represent our measurement data. 2) It is often assumed that the Rician if-factor is equal to the power ratio of the LOS component and the other multipath components (MPCs). We show that this is not the case, and we highlight the difference between the Rician if-factor often associated with LOS channels and a similar power ratio for the estimated LOS MPC. 3) A widespread assumption is that the full correlation matrix of the channel can be decomposed into a Kronecker product of the correlation matrices at the transmit and receive array. Our investigations show that the direction-of-arrival (DOA) spectrum noticeably depends on the direction-of-departure (DOD); therefore, the Kronecker model is not applicable, and models with less-restrictive assumptions on the channel, e.g., the Weichselberger model or the full correlation model, should be used.     

随机桥方法研究超宽带无线信道

该文使用随机桥方法研究超宽带室内多径信道。首先介绍随机桥理论,分析UWB室内多径信道的物理基础;然后对UWB脉冲信号失真问题和脉冲信号的相位问题进行深入分析。把UWB信号在信道中发生的传播损耗和与散射体发生碰撞产生的损耗分开,假设UWB多径信号的传播路径为布朗桥过程,同时采用双值相位假设,得到布朗桥模型信道冲激响应。对有金属网格玻璃门反射的走廊环境进行仿真,得到的UWB信道功率时延分布与公布的UWB信道测量结果一致。     

MFSK水声远程通信技术及试验研究

海洋水声信道是多途、时变和频散的信道。论文针对浅海远程80～100km,设计出基于MFSK高数据率水声远程信息传输最佳系统。本系统经湖试验证表明:该技术在远程通信恶劣条件下具有较强抗多径干扰和信道衰落能力,对同步精度要求低,可实现80～100km,40bit/s,10-4量级通信精度的信息可靠传输,性能稳健,易于工程实现。     

卫星移动通信信道特性与模型研究

从多径效应、阴影效应、多普勒效应和电离层闪烁等方面具体分析了卫星移动通信信道传输特性,并从单状态统计模型和多状态统计模型两方面详细介绍了瑞利信道模型、莱斯信道模型、对数正态衰落信道模型、Loo模型、Corazza模型、Lutz两状态信道模型和五状态M arkov信道模型,最后对未来卫星移动通信信道模型研究做了展望。     

城市微区角度色散移动信道特性的建模与仿真

城市微蜂窝数字移动通信网无线电信道的一个非常重要的传播特征就是多径传播环境结构所造成的电波入射角度色散。这种现象是移动台在随机游走过程中，由于周围随机分布的复杂建筑结构和随机变化的人为及自然环境使得经过等效反射路径到达接收机的电波入射角度随着移动速度而产生的其分布不断变化的任意扩散结果。因此角度色散信道是在多普勒效应的作用下伴随着频率色散而出现的，而对其信道特性进行研究的关键就是了解各种传播环境下的电波入射角分布结构。本文在研究角度色散信道传播特性理论模型的基础上，构造了一种用代表其信道物理量的特征参数表示任意传播信道电波入射角分布的一般结构模型，并根据这种入射角分布模型来研究和分析在不同城市环境中移动无线电多径色散信道的信号传播特性，最后通过计算机模拟仿真进一步分析了不同的电波入射角角度分布对信道传播特性的影响。