Adsorption characteristics of metal ions by CO2-fixing Chlorella sp. HA-1

Single and binary metal systems were employed to investigate the removal characteristics of Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺ by Chlorella sp. HA-1 that were isolated from a CO₂ fixation process. Adsorption test of single metal systems showed that the maximum metal uptakes were 0.767 mmol Pb²⁺, 0.450 mmol Cd²⁺, 0.334 mmol Cu²⁺ and 0.389 mmol Zn²⁺ per gram of dry cell. In the binary metal systems, the metal ions on Chlorella sp. HA-1 were adsorbed selectively according to their adsorption characteristics. Pb²⁺ ions significantly inhibited the adsorption of Cu²⁺, Zn²⁺, and Cd²⁺ ions, while Cu²⁺ ions decreased remarkably the metal uptake of Cd²⁺ and Zn²⁺ ions. The relative adsorption between Cd²⁺ and Zn²⁺ ions was reduced similarly by the presence of the other metal ions.     

Uptake of Cu, Cd and Pb on Zn–Al layered double hydroxide intercalated with edta

Hydrotalcite-like compound [Zn₂Al(OH)₆]₂edta·nH₂O(ZnAl-edta) was obtained from the precursor [Zn₂Al(OH)₆]NO₃·nH₂O (ZnAl-NO₃), by the anion exchange method, with the aim of uptake Cu²⁺, Cd²⁺ and Pb²⁺ from the aqueous solutions by chelating process between edta and metal cations. The amount of Cu²⁺, Cd²⁺ and Pb²⁺ adsorbed was monitorized by atomic absorption technique at different contact time, pH and metal concentrations. The results indicate the very fast adsorption of the metal cations by ZnAl-edta reaching the equilibrium of the uptake reaction in two hours for Cu and Pb and 24 h for Cd. The shape of the adsorption isotherms suggests specific interaction and high host–guest affinity. At pH 5.5 and initial concentration C_i = 10 mM, the amount adsorbed was C_s = 1117, 375 and 871 μmol/g for Cu²⁺, Cd²⁺ and Pb²⁺, respectively.     

Synthesis of magnetic Fe3O4@SiO2-(-NH2/-COOH) nanoparticles and their application for the removal of heavy metals from wastewater

In this work, Fe₃O₄@SiO₂-(-NH₂/-COOH) nanoparticles were synthesized for the removal of Cd²⁺, Pb²⁺ and Zn²⁺ ions from wastewater. The results of characterization showed that Fe₃O₄@SiO₂-(-NH₂/-COOH) was superparamagnetic with a core–shell structure. The surface of Fe3O4 was successfully coated with silica and modified with amino groups and carboxyl groups through the use of a silane coupling agent, polyacrylamide and polyacrylic acid. The dispersion of the particles was improved, and the surface area of the Fe3O4@SiO2-(-NH2/-COOH) nanoparticles was 67.8 m²/g. The capacity of Fe₃O₄@SiO₂-(-NH₂/-COOH) to adsorb the three heavy metals was in the order Pb²⁺ > Cd²⁺ > Zn²⁺, and the optimal adsorption conditions were an adsorption dose of 0.8 g/L, a temperature of 30°C and concentrations of Pb²⁺, Cd²⁺ and Zn²⁺ below 120, 80 and 20 mg/L, respectively. The maximum adsorption capacities for Pb²⁺, Cd²⁺ and Zn²⁺ were 166.67, 84.03 and 80.43 mg/g. The adsorption kinetics followed a pseudo-second-order model and Langmuir isotherm model adequately depicted the isotherm adsorption process. Thermodynamic analysis showed that the adsorption of the three metal ions was an endothermic process and that increasing the temperature was conducive to this adsorption.     

Preparation of Chelating Resins Containing a Pair of Neighboring Carboxylic Acid Groups and the Adsorption Characteristics for Heavy Metal Ions

Abstract

For the functional enhancement of chelating resins containing carboxylic acids, copolymer beads were prepared by suspension polymerization of styrene (St), methyl methacrylate (MMA), and divinylbenzene (DVB) in the presence of toluene as diluent. The phenyl rings of the beads were directly chloromethylated, and the carboxylic ester groups of the beads were converted into hydroxymethyl groups by reduction followed by chlorination to give chloromethyl groups, respectively. The chelating resins containing a pair of neighboring carboxylic acid groups (NCAGs) were obtained by the alkylation of chloromethyl groups in copolymer beads with diethyl malonate in the presence of sodium hydride followed by hydrolysis using aqueous alkali solution. Accordingly, the structural effects of the resins on the adsorption of heavy metal ions were investigated. Poly(St‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, and Cu²⁺, whereas poly(MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Cu²⁺, Cd²⁺, and Co²⁺. On the other hand, poly(St‐co‐MMA‐co‐DVB)‐based chelating resin containing NCAGs showed adsorption abilities toward heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, Co²⁺, and Cu²⁺: a synergistic effect on the adsorption of heavy metal ions like Pb²⁺, Cd²⁺, Hg²⁺, and Co²⁺ was observed. The adsorption ability of poly(St‐co‐MMA‐co‐DVB)‐based chelating resin among three kinds of chelating resins was relatively good.     

Adsorption of Mercury(II), Lead(II), Cadmium(II) and Zinc(II) from Aqueous Solutions using Mercapto‐Modified Silica Particles

This article presents a novel systematic approach to the fabrication of highly functionalized, silica (SiO₂) nanoparticles used for the adsorption of heavy‐metal ions (Hg²⁺, Pb²⁺, Cd²⁺, Zn²⁺). Almost monodispersed silica (SiO₂) nanoparticles with narrow particle size distributions of around 85 ± 5 nm were formed using the Stöber process. The prepared SiO₂ nanoparticles were successfully surface‐treated during a one‐step procedure by the covalent attachment of mercaptopropyl groups onto the surfaces of the SiO₂ nanoparticles. A FTIR spectra analysis confirmed that the binding of the mercaptosilane molecules onto the surface of the silica nanoparticles mediated the Si–O–Si and –SH vibrations. TEM/EDXS micrographs indicated the almost monodispersed and spherical morphology of the prepared product with strong signals of Si and S, thus implying that the coating procedure involving the mercapto groups onto the silica surface had been successfully accomplished. The final results for the heavy‐metal (Hg²⁺, Pb²⁺, Cd²⁺, Zn²⁺) adsorption showed the strongest affinity within the following sequence Hg²⁺ (99.9%) > Pb²⁺ (55.9%) > Cd²⁺ (50.2%) > Zn²⁺ (4%). Adsorption equilibrium was achieved after 1 h for all the analyzed samples.     

ION EXCHANGE PROPERTIES OF THE SULFUR-MODIFIED BIOTITE

ABSTRACT

The ion exchange behavior of a sulfur-modified biotite towards Pb²⁺, Hg²⁺, Co²⁺, Cu²⁺, Cd²⁺ and Zn²⁺ ions has been studied. The ion exchange isotherms of divalent cations were determined and concentration equilibrium constants as a function of metal loading were analyzed. Sulfur modified biotite exhibits high affinity for Hg²⁺, Pb²⁺, Cu²⁺ and Cd²⁺ ions in individual solutions and in the presence of electrolytes. About 200 mg Hg/g uptake in 1·10^?3 M Hg²⁺ solution and ～ 35 mg Hg/g in groundwater simulant or an alkaline simulant 2 M in NaN0₃ + 1 M in NaOH was found. The possibility of a complex ion exchange and precipitation mechanism of the sulfur modified biotite towards the soft cations is proposed.     

Interaction of metal ions with montmorillonite and vermiculite

The behaviour of montmorillonite and vermiculite toward adsorption of Cd²⁺, Pb²⁺, Zn²⁺, Mn²⁺, Cu²⁺ and Zn²⁺ was compared. In general, the uptake of metal ions on both clay minerals decreased with decreasing of pH and in the presence of ligands forming stable complexes. Metal ion retention on montmorillonite was less affected by the competition of sodium ions at high ionic strengths with respect to vermiculite. On the other hand, the total capacity of vermiculite with respect to the investigated metal ions was found to be much higher than that of montmorillonite, whereas the order of affinity of the metal ions for the two clay minerals was similar, i.e.: Pb²⁺ = Cd²⁺ < Cu²⁺ < Zn²⁺ < Mn²⁺ < Ni²⁺ for montmorillonite and Pb²⁺ < Cu²⁺ < Cd²⁺ < Zn²⁺ < Ni²⁺ < Mn²⁺ for vermiculite.The similarities and differences between the two clay minerals were also investigated by principal component analysis and hierarchical cluster analysis.The results of this study may be used to predict the uptake efficiency of these adsorbents in view of their application for the removal of metal ions from contaminated effluents. The choice of vermiculite or montmorillonite for the uptake of metal ions or other elements will depend on the composition of the effluent to be treated.     

Synthesis and characterization of a new guar gum 4‐hydroxybenzoic acid resin and its use for the separation of heavy metal ions in industrial effluents

Hydroxybenzoic acid group has been incorporated onto guar gum by modified Porath's method of functionalization of polysaccharides. The newly synthesized guar gum 4‐hydroxybenzoic acid (GHBA) resin was characterized by Fourier‐transform infrared spectroscopy, elemental analysis, ion‐exchange capacity, column reusability, and physicochemical properties. The distribution coefficient (K_d) values and effect of pH on chelation of these metal ions using batch method were studied. The separations of mixture of Fe²⁺, Zn²⁺, Cu²⁺, Cd²⁺, and Pb²⁺ metal ions on GHBA resin on the basis of their distribution coefficient at various pH were also achieved using column chromatography. The effect of experimental parameters such as pH, treatment time, agitation speed, temperature, adsorbent dose, initial metal ion concentration, and flow rate on the removal of metal ions has been also studied. GHBA resin is effective adsorbents for the removal of different toxic metal ions from aqueous solutions and follows the order: Fe²⁺ > Zn²⁺ > Cu²⁺ > Cd²⁺ > Pb²⁺. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers     

Competitive Adsorption of Ag+, Pb2+, Ni2+, and Cd2+ Ions on Vermiculite

Competitive adsorption of Ag⁺, Pb²⁺, Ni²⁺, and Cd² ions on vermiuculite in a binary, ternary, and quaternary mixture was investigated in batch experiments. The effects of the presence of Ag⁺, Ni²⁺, and Cd²⁺ ions on the adsorption of Pb²⁺ ions were investigated in terms of the equilibrium isotherm. Experimental results indicated that Pb²⁺ ions always favorably adsorbed on vermiculite over Ag⁺, Ni²⁺, and Cd²⁺ ions. The adsorption equilibrium data of Pb²⁺ ions better fitted the Langmuir model than the Freundlich model. The results showed that the pseudo-second-order kinetics model was in good agreement with the experimental results for all metal ions, and the adsorption rate among the metal ions followed Ag⁺ > Pb²⁺ > Ni²⁺ > Cd²⁺. The desorption and regenration study indicated that vermiculite can be used repeatedly and be suitable for the design of a continuous process.     

Polyelectrolyte adsorption study on polyethersulfone membrane during polymer-enhanced ultrafiltration by electrochemical impedance spectroscopy

Electrochemical impedance spectroscopy (EIS) was used to study the fouling produced due to the adsorption of poly(vinyl sulfonic acid) on polyethersulfone membrane during metal ion recovery by polymer-enhanced ultrafiltration (PEUF). A solution of PVSA (40 mM in monomeric unit and pH 3.0, 4.5, and 6.0) was placed in a ultrafiltration cell, and then a stream of metal ions (2.0 mM in Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Pb²⁺) was passed from reservoir to cell. Fouled membranes were studied by EIS at low and intermediate frequencies. Measurements of hydrodynamic permeability and ATR-FTIR spectra were also obtained. Different relaxation processes were observed with characteristic frequencies (f ₀) ~ 78 kHz and f ₀ ~ 3562 kHz for active layer and clean membrane, respectively, while the frequencies for the fouled membrane f ₀ = ~79.4 and f ₀ = ~2511.9 kHz (pH 3.0). The value of f ₀ could not be defined at pH 6.0. The relaxation times obtained were in the order of ×10⁻⁵ and ×10⁻³ s approximately for all cases. Our results suggest that relaxation mechanisms, at intermediate frequencies, can mainly be associated to polarization processes or to the migration of charge carriers.     

Competitive Metal Ion Binding to a Silicate-Immobilized Datura innoxia Biomaterial

Abstract

Metal ion binding with a flowing system to a biosorbent comprised of cultured cell-wall fragment within a polysilicate matrix has been investigated. Solutions containing 0.10 mM Pb²⁺, Cu²⁺, Ni²⁺, Cd²⁺, and Zn²⁺ were exposed to the material in combinations of two, three, and five metals while simultaneously monitoring the concentration of all metals in the effluent stream. A relative affinity order of Pb²⁺ > Cu²⁺ >> Zn²⁺ ≈ Cd²⁺ > Ni²⁺ was determined when all five metal ions were exposed to the material. Lower-affinity metal ions were exposed to the material sequentially. Both metal-specific and common binding sites were observed for each metal ion. The presence of both binding sites that are common to all metal ions investigated and sites that appear to be unique for each metal ion could significantly impact the utility of single-metal ion studies on the application of such biosorbents for the selective removal of metal ions from natural water.     

One-Dimensional Cd(II) and Co(II) Coordination Polymers with Dinuclear Secondary Building Units Constructed by 1,1′-Biphenyl-3,3′-Dicarboxylic Acid: Synthesis, Structures, Luminescent and Magnetic Properties

Bilayered diffusion and hydrothermal synthetic methods using pyridine (py) and 2,6-dimethylpyrazine (dmpz) as weak bases and small terminal ligands generated two Cd(II) and Co(II) 1D coordination polymers with dinuclear metal clusters as secondary building units (SBUs) from an organic bridging ligand, 1,1′-biphenyl-3,3′-dicarboxylic acid (H₂ L). They are {[Cd₂(L)₂(py)₄] (py)(CH₃OH)} _n (1) and [Co₂(L)₂(dmpz)₄(H₂O)] _n (2). Compounds 1 crystallizes in the monoclinic space group P2(1)/c, while 2 crystallizes in the triclinic space group P-1. Especially, compound 2 possesses the 1D chain structure that contains two linked left-handed and right-handed helices. Fluorescent measurements for 1 display strong blue light emissions with the maximum emission at 396 nm with the excitation of 320 nm. Magnetization study shows the existence of weak antiferromagnetic coupling for 1 with the negative −E ₂/k value of −1.3 K.     

A Comparative Study on Characterization of Aluminium Tungstate and Surfactant-Based Aluminium Tungstate Cation-Exchangers: Analytical Applications for the Separation of Toxic Metal Ions

Two cation-exchange materials, aluminium tungstate (AT) and sodium dodecyl sulphate–aluminium tungstate (SDS–AT), were synthesized. Both samples were characterized by Fourier transform infrared spectroscopy, X-ray diffraction analysis and scanning electron microscopy. The distribution coefficients for various metal ions on SDS–AT cation-exchange material were performed in different solvent systems. On the basis of distribution coefficient values, the SDS–AT cation-exchange material was found to be selective for the very toxic metal ion, Cr³⁺. The hybrid cation-exchange material offered a variety of technological opportunities for quantitative determination and separation of Cr³⁺ from synthetic mixtures of metal ions. Some binary and ternary separations of metal ions; viz., Cd²⁺–Cr³⁺, Zn²⁺–Cr³⁺, Cu²⁺–Cr³⁺, Pb²⁺–Cr³⁺, Mg²⁺–Pb²⁺–Cr³⁺ and Mg²⁺–Cd²⁺–Cr³⁺, were performed using a packed column of this material.     

Effect of Coordination Modes of HL Ligand on the Molecular Architecture of Its Transition Metal Complexes (HL = 5-Methyl-2-Phenyl-4-[(2-<Emphasis Type="Italic">o</Emphasis>-Tolylamino)-Phenylmethylene]pyrazol-3(2H)-one)

Abstract  Two Ag⁺ complexes [Ag(HL)₂(PF₆)] (1) and [(AgL) _n  · n(CH₂Cl₂) · n(0.5H₂O)] (2) (HL = 5-methyl-2-phenyl-4-[(2-o-tolylamino)-phenylmethylene]pyrazol-3(2H)-one) were synthesized and structurally characterized by EA analysis, IR spectra and X-ray crystallography. The result shows that two expected coordination modes (Modes I and III in Scheme 1) of the HL ligand, can be observed in its Ag⁺ complexes, while not in other transition metal ions (Ni²⁺, Co²⁺ or Cu²⁺) complexes whether deprotonation or not for the HL ligand. Graphical Abstract  Three possible coordination modes (Modes I, II or III in Scheme 1) of the selected HL (HL = 5-methyl-2-phenyl-4-[(2-o-tolylamino)-phenylmethylene]pyrazol-3(2H)-one) ligand, can be adopted, in which Modes I and III can be observed in its two Ag⁺ complexes [Ag(HL)₂(PF₆)](1) and [(AgL) _n  · n(CH₂Cl₂) · n(0.5H₂O)] (2), while Mode II just observed in its transition metal ions (Cu²⁺, Ni²⁺, or Co²⁺) complexes, resulting from the deprotonatd form of the HL ligand and the coordination characters of transition metal ions.      

The competitive heavy metal removal by hydroxyethyl cellulose-g-poly(acrylic acid) copolymer and its sodium salt: The effect of copper content on the adsorption capacity

Summary Crosslinked hydroxyethyl cellulose-g-poly(acrylic acid) (HEC-g-pAA) graft copolymer was prepared by grafting of acrylic acid (AA) onto hydroxyethyl cellulose (HEC) using [Ce(NH₄)₂(NO₃)₆]/HNO₃ initiator system in the presence of poly(ethyleneglycol diacrylate) (PEGDA) crosslinking agent in 1:1 (v/v) mixture of methanol and water at 30 °C. Carboxyl content of copolymer was determined by neutralization of –COOH groups with NaOH solution and sodium salt of copolymer (HEC-g-pAANa) was swelled in distilled water in order to determine the equilibrium swelling value of copolymer. Both dry HEC-g-pAA and swollen HEC-g-pAANa copolymers were used in the heavy metal ion removal from three different aqueous ion solutions as follows: a binary ion solution with equal molar contents of Pb²⁺and Cd²⁺, a triple ion solution with equal molar contents of Pb²⁺, Cu²⁺ and Cd²⁺, and a triple ion solution with twice Cu²⁺molar contents of Pb²⁺and Cd²⁺. Higher removal values on swollen HEC-g-pAANa were observed in comparison to those on dry polymer. The presence of Cu²⁺decreased the adsorption values for Pb²⁺ and Cd²⁺ ions on both types of HEC copolymer. However, with further increase in Cu²⁺ content both dry and swollen copolymers became apparently selective to Cu²⁺ removal and Cu²⁺ removal values exceeded the sum of adsorption values for Pb²⁺ and Cd²⁺. Maximum metal ion removal capacities were 1.79 and 0.85 mmol Me²⁺/g_polymer on swollen HEC-g-pAANa and dry HEC-g-pAA, respectively.     

Preferential occupancy of metal ions in the hydroxyapatite solid solutions synthesized by hydrothermal method

The solid solutions in the systems of Ca-Cd HAp [Ca_10−xCd_xHAp (x = 0–10)], Ca-Sr HAp [Ca_10−xSr_xHAp (x = 0–10)] and Ca-Pb HAp [Ca_10−xPb_xHAp (x = 0–10)], were successfully synthesized at 200 °C for 12 h under hydrothermal conditions. The site of the metal ions in the solid solutions was analyzed by the Rietveld method. The results of the Rietveld analysis indicated that the metal ions of Pb²⁺, Sr²⁺, and Cd²⁺ all preferentially occupied M (2) sites in the apatite structure. The preferential occupancy of the metal ions in M (2) sites were explained mainly by their ionic radius and electronegativity.     

C,N‐Pyridylpyrazole‐Based Ligands: Synthesis and Preliminary Use in Metal Ion Extraction

Abstract

The synthesis of new N‐donor pyridylpyrazole ligands with a functionalized arm is described. The complexation capabilities of these compounds towards bivalent metal ions (Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, and Zn²⁺) and alkali metal ions (K⁺, Na⁺, and Li⁺) were investigated using the liquid‐liquid extraction process. The percentage limits of extraction were determined by atomic absorption measurements.     

A Novel Bimetallic Chain Based on [Mo(CN)<Subscript>8</Subscript>]<Superscript>3−</Superscript> and Yb<Superscript>3+</Superscript> Ions as Building Blocks in Which Containing Many Intriguing Structural Features

A novel Mo^V–Yb^III bimetallic chain, {[Yb^III(bpy)₂(DMF)(H₂O)][Mo^V(CN)₈]·0.5bpy·4.5H₂O}_n (1) (DMF = N,N′-dimethylformamide; bpy = 2,2′-bipyridine), has been constructed by the reaction of [Mo(CN)₈]³⁻ with Yb³⁺ and 2,2′-bipyridine. Complex 1 is confirmed as a host–guest supramolecular structure by X-ray structural analysis. The neighboring chains interact with each other with two types of hydrogen bonds and two types of π···π interactions. Thus complex 1 has a unique 3D network. Magnetic analysis of 1 indicates the presence of a strong Yb^III single-ion effect owing to spin–orbital coupling within this system.     

From 1-<Emphasis Type="SmallCaps">d</Emphasis> to 3-<Emphasis Type="SmallCaps">d</Emphasis> Supramolecular Structures Derived from Diphenic Acid and Auxiliary Ligands

Four novel compounds [Co(Hdpa) ₂(4,4′-bipy)₂]_n (1), {[Ni(dpa)(2,2′-bipy)(H₂O)](H₂O)}_n, (2), [Ni(dpa)(im)₃]_n (3) and [Zn(dpa)(im)]_n (4) [H₂dpa = 2,4′-diphenyl-dicarboxylic acid, 4,4′-bipy = 4,4′-bipyridine, 2,2′-bipy = 2,2′-bipyridine and im = imidazole] were synthesized and characterized by elemental analysis, IR and single-crystal X-ray diffraction. X-ray crystallography shows that the 2,4′-diphenic acid exhibits three coordination modes to link the metal ions: μ ₁ −η¹: η¹/μ ₀ −η⁰: η⁰, μ ₁−η ¹: η ⁰/μ ₂−η ¹: η ¹ and μ ₁−η ¹: η ⁰/μ ₁−η ¹: η ⁰. Compound 1 has a 1D supramolecular structure. Compounds 2 and 3 are 3D supramolecular structures. Compound 4 is a 2D supramolecular structure. All the compounds, 1–4, are self-assembled to form supramolecular structures through hydrogen bonding interactions.     

Cooperative Effect of 3,3′,4,4′-Benzophenonetetracarboxylic Acid and 1,10-Phenanthroline under Solvothermal Conditions to Afford Two Novel Zinc(II) and Cadmium(II) Complexes

Rational self-assembly of a flexible ligand 3,3′,4,4′-benzophenonetetracarboxylic acid and d¹⁰ transition metal salts in the presence of rigid bidentate ligand 1,10-phenanthroline yields two novel helical coordination polymers with different structural motifs; i.e., [Zn(H₂bbtc)(phen)₂ · 2H₂O] _n (1) and [Cd₂(bbtc)(phen)₄ · 2.25H₂O] _n (2) (H₄bbtc = 3,3′,4,4′-benzophenonetetracarboxylic acid, phen = 1,10-phenanthroline), under solvothermal condition. One is hydrogen bonded and π–π stacked together into a network, and the other is a covalently coordinated 3D framework. The coordination polymers were characterized by FT-IR, UV/VIS and fluorescent spectroscopy, single crystal X-ray diffraction, elemental analysis and differential thermal analysis/thermogravimetry (DTA/TG). The most intriguing structural feature is that each complex exhibits novel helical-spaced chains by reason of two different ligands coordinating to the metal centers. Additionally, compounds 1 and 2 showed good fluorescence properties compared to the free ligands.