Photocatalytic properties of redox-treated Pt/TiO2 photocatalysts for H2 production from an aqueous methanol solution

The influence of redox-treated Pt/TiO₂ photocatalysts on H₂ production is investigated. Catalyst characterizations are performed by TEM, XPS, XRD, BET, and UV–vis/DR spectroscopy techniques. In terms of production rate, the oxidation treatment shows higher reactivity than the reduction treatment. The reduction treatment allows the formation of metallic Pt(0), which more easily catalyzes the transition of TiO₂ from the anatase to the rutile phases. Reduction-treated Pt/TiO₂ photocatalysts have lower S_BET values than oxidation-treated Pt/TiO₂ photocatalysts due to the higher percentage of TiO₂ in the rutile phase. Combining the results of XPS and optical analyses, PtO/TiO₂ shows a higher energy band gap than metallic Pt(0)/TiO₂, indicating that oxidation-treated Pt/TiO₂ is more capable of achieving water splitting for H₂ production. According to the results of this study, the oxidation treatment of Pt/TiO₂ photocatalysts can significantly enhance the reactivity of photocatalytic H₂ production because of their homogenous distribution, lower phase transition, higher S_BET, and higher energy band gap.     

High quantum efficiency Pt/TiO2 catalyst for sacrificial water reduction

Platinum photodeposition on TiO₂ from methanolic solution of chloroplatinic acid (CPA) is investigated to determine the conditions that give optimum photocatalytic activity towards dehydrogenation of methanol. Conditions favoring nucleation of Pt islets rather than their autocatalytic growth enhance the catalytic activity. Photoplatinization from idoplatinic acid, adsorbing more strongly on TiO₂ than CPA produced more active Pt/TiO₂ catalysts. The best catalyst prepared from CPA yielded H₂ from 12.5% methanol solution at a quantum efficiency of 23.9% whereas for idoplatinic acid based catalysts, the quantum efficiency increased to 42.5%.     

Hydrogen production using Pt-loaded TiO2 photocatalysts

A series of synthesised TiO₂-based and commercial photocatalysts were modified by Pt photodeposition and a study made of their photocatalytic activity in hydrogen production. The modified commercial photocatalysts were Evonik P25, Kronos vlp7000 and Hombikat UV-100, and the other modified photocatalysts were synthesised by our group using sol–gel and sol–gel hydrothermal processes (SG400, SG750 and HT). Pt weight percentages used in the study were 0.5, 1.0 and 2.1 wt.% (Pt/TiO₂). The photocatalysts were extensively characterised by X-ray diffraction (XRD), UV–vis diffuse reflectance, Brunauer–Emmett–Teller (BET) surface area measurement, transmission electron microscopy (TEM), scanning electron microscopy (SEM–EDX), Fourier transform infrared spectroscopy (FTIR) and laser light dispersion. Methanol (25% vol.) was used as sacrificial agent over the 8 h of the hydrogen production tests and measurements were taken of the final concentrations of formaldehyde and formic acid as well as initial and final TOC. Photoactivity of all photocatalysts increased in the presence of Pt. The most efficient of the synthesised photocatalysts was SG750 and of the commercial photocatalysts P25. Maximum production of SG750 was 1846 μmol h⁻¹ at 1.0 wt.% Pt and its production per surface unit was notably higher than that of P25.     

Effect of H2O2 on Pt electrode dissolution in H2SO4 solution based on electrochemical quartz crystal microbalance study

The effect of H₂O₂ on the Pt dissolution in 0.5 mol dm⁻³ H₂SO₄ was investigated using an electrochemical quartz crystal microbalance (EQCM). For the potential cycling at 50 mV s⁻¹, the Pt weight irreversibly decreases in a N₂ atmosphere with H₂O₂, while only a negligible Pt weight-loss is observed in the N₂ and O₂ atmospheres without H₂O₂. The EQCM data measured by the potential step showed that the Pt dissolution in the presence of H₂O₂ depends on the electrode potential and the H₂O₂ concentration. For the stationary electrolysis, the Pt dissolution occurs at 0.61–1.06 and 1.06–1.36 V vs. RHE. It should be noted that the Pt dissolution phenomenon in the presence of H₂O₂ is also affected by the potential scanning time. Based on these results, H₂O₂ is considered not only to contribute to the formation of Pt-oxide causing the cathodic Pt dissolution, but also to participate in the anodic Pt dissolution and the chemical Pt dissolution.     

The size and valence state effect of Pt on photocatalytic H2 evolution over platinized TiO2 photocatalyst

Photocatalytic hydrogen production from water or organic compounds is a promising way to resolve our energy crisis and environmental problems in the near future. Over the past decades, many photocatalysts have been developed for solar water splitting. However, most of these photocatalysts require cocatalyst to facilitate H₂ evolution reaction and noble metals as key cocatalysts are widely used. Consequently, the condition of noble metal cocatalyst including the size and valence state etc plays the key role in such photocatalytic system. Here, the size and valence state effect of Pt on photocatalytic H₂ evolution over platinized TiO₂ photocatalyst were studied for the first time. Surprisingly, it was found that Pt particle size does not affect the photoreaction rate with the size range of several nanometers in this work, while it is mainly depended on the valence state of Pt particles. Typically, TOFs of TiO₂ photodeposited with 0.1–0.2 wt% Pt can exceed 3000 h⁻¹.     

Self-doped Ti@TiO2 visible light photocatalyst: Influence of synthetic parameters on the H2 production activity

Self-doped TiO₂ shows visible light photocatalytic activity, while pristine TiO₂ is only UV responsive. Ti³⁺ has been demonstrated to be responsible for this improvement. We systematically studied various experimental parameters, such as the amount of reducing agent imidazole, types of imidazoles and Ti sources, and determined effects of these parameters on the combustion process and final materials. The phase composition, Ti³⁺ concentration, light absorption, surface area, and crystallinity of the product are significantly affected by the amount of imidazoles. Through comparing different imidazoles, we found that only flammable/combustible imidazoles are able to convert Ti⁴⁺ into Ti³⁺. This result is very helpful in understanding the mechanism and reactions in combustion process. Titanium precursors also have a great influence in production of Ti³⁺ doped TiO₂ materials. Titanium alkoxides allow the successful synthesis of blue partially reduced TiO₂, while TiCl₄ only lead to white pristine TiO₂.     

Electrospun Pt/TiO2 hybrid nanofibers for visible-light-driven H2 evolution

One-dimensional (1D) Pt/TiO₂ hybrid nanofibers (HNFs) with different concentrations of Pt were fabricated by a facile two-step synthesis route combining an electrospinning technique and calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) results showed that the Pt nanoparticles (NPs) with the size of 5–10 nm were well dispersed in the TiO₂ nanofibers (NFs). Further investigations from the UV–Vis diffuse reflectance (DR) and X-ray photoelectron spectroscopy (XPS) analysis revealed that some Pt ions were incorporated into the TiO₂ lattice as Pt⁴⁺ state, which contributed to the visible light absorption of TiO₂ NFs. Meanwhile, the Pt²⁺ ions existing on the surface of Pt NPs resulted in the formation of Pt–O–Ti bond at Pt NPs/TiO₂ NFs interfaces that might serve as an effective channel for improving the charge transfer. The as-electrospun Pt/TiO₂ HNFs exhibited remarkable activities for photocatalytic H₂ evolution under visible light irradiation in the presence of l-ascorbic acid as the sacrificial agent. In particular, the optimal HNFs containing 1.0 at% Pt showed the H₂ evolution rate of 2.91 μmol h⁻¹ and apparent quantum efficiency of 0.04% at 420 nm by using only 5 mg of photocatalysts. The higher photocatalytic activity could be ascribed to the appropriate amount of Pt ions doping and excellent electron-sink effect of Pt NPs co-catalysts.     

Green synthesis of fibrous hierarchical meso-macroporous N doped TiO2 nanophotocatalyst with enhanced photocatalytic H2 production

A new approach to prepare hierarchical and fibrous meso-macroporous N-doped TiO₂ is attempted at room temperature without using templates by the addition of titanium isopropoxide droplets to the ammonia solution. The catalysts are thoroughly characterized by physico-chemical and spectroscopic method to explore the structural, electronic and optical properties. The photocatalytic activities of the catalyst were evaluated with hydrogen generation. NTP catalyst calcined at 400 °C (NTP-400) exhibited 602.7 μmol/3 h H₂ generation from 10 vol.% methanol under visible light. The excellent photocatalytic activity for NTP-400 is attributed to the porous networks existing in our system with uniform N dispersion throughout the catalyst. The hierarchical and fibrous structures allow easy channelization of electron as in the case of nanotubes for effective surface charge transfer. Along with macroporosity, nitrogen incorporation and mesoporosity play some important roles for enhanced photoactivities.     

Direct Z-scheme anatase/rutile bi-phase nanocomposite TiO2 nanofiber photocatalyst with enhanced photocatalytic H2-production activity

Design and preparation of direct Z-scheme anatase/rutile TiO₂ nanofiber photocatalyst to enhance photocatalytic H₂-production activity via water splitting is of great importance from both theoretical and practical viewpoints. Herein, we develop a facile method for preparing anatase and rutile bi-phase TiO₂ nanofibers with changing rutile content via a slow and rapid cooling of calcined electrospun TiO₂ nanofibers. The phase structure and composition, surface morphology, specific surface area, surface chemical composition and element chemical states of TiO₂ nanofibers were analyzed by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), nitrogen adsorption and X-ray photoelectron spectroscopy (XPS). By a rapid cooling of 500 °C-calcined electrospun TiO₂ precursor, anatase/rutile bi-phase TiO₂ nanofibers with a roughly equal weight ratio of 55 wt.% anatase and 45 wt.% rutile were prepared. The enhanced H₂ production performance was observed in the above obtained anatase/rutile composite TiO₂ nanofibers. A Z-scheme photocatalytic mechanism is first proposed to explain the enhanced photocatalytic H₂-production activity of anatase/rutile bi-phase TiO₂ nanofibers, which is different from the traditional heterojunction electron–hole separation mechanism. This report highlights the importance of phase structure and composition on optimizing photocatalytic activity of TiO₂-based material.     

Preparation and photocatalytic properties of HLaNb2O7/(Pt,TiO2) perovskite intercalated nanomaterial

A novel perovskite intercalated nanomaterial HLaNb₂O₇/(Pt, TiO₂) is fabricated by successive intercalated reaction of HLaNb₂O₇ with [Pt(NH₃)₄]Cl₂ aqueous solution, n-C₆H₁₃NH₂/C₂H₅OH organic solution and acidic TiO₂ colloid solution, followed by ultraviolet light irradiation. The gallery height and the band gap energy of HLaNb₂O₇/(Pt, TiO₂) is less than 0.6 nm and 3.14 eV, respectively. The photocatalytic activity of HLaNb₂O₇/TiO₂ is superior to that of unsupported TiO₂ and is enhanced by the co-incorporation of Pt. The photocatalytic hydrogen evolution based on HLaNb₂O₇/(Pt, TiO₂) is 240 cm³ h⁻¹ g⁻¹ using methanol as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. High photocatalytic activity of HLaNb₂O₇/(Pt, TiO₂) may be due to the host with rare earth La element and perovskite structure, the quantum size effect of intercalated semiconductor and the coupling effect between host and guest.     

Catalyst deactivation in on-board H2 production by fuel dehydrogenation

The production of H₂ for on-board application is a very interesting challenge for industrial and academic researchers. The aim is the application of on-board hydrogen production on the airplanes using kerosene as H₂ source. In this work an in depth study into the partial dehydrogenation (PDH) of two hydrocarbons blends and desulfurized JetA1 fuel has been performed by using 1 wt.%Pt–1 wt.%Sn/γ-Al₂O₃ and 1 wt.%Pt–1 wt.%Sn–0.5%K/γ-Al₂O₃ to find a way to produce H₂ “on-board” for the feeding of the fuel-cell apparatus. The mechanism of deactivation by coke was studied in depth combining Raman spectroscopy and Temperature-programmed oxidation (TPO) analyses. Microstructure analysis of metallic particles in fresh and deactivated catalysts was investigated by HRTEM. Relatively high H₂ partial pressure increases catalyst life by controlling full dehydrogenation coke-forming reaction. By feeding model organic molecules, it was possible to identify the contribution of each class of compounds to the H₂ production as well as the amount and type of coke formed. A relatively complex reaction pathway, which is able to evidence the role of different sites and reactions involved in PDH processes, was proposed.     

Synergistic effect of Cu2O/TiO2 heterostructure nanoparticle and its high H2 evolution activity

Cu₂O/TiO₂ nanoparticles were prepared by solvothermal method, which formed the heterostructure of Cu₂O/TiO₂. Due to the heterostructure, the H₂ evolution rate under simulated solar irradiation was increasingly promoted. Meanwhile a certain amount of Cu particles which were confirmed by Transmission Electro Microscopy (TEM) and X-Ray Photoelectron Spectroscopy (XPS), formed on the surface of Cu₂O/TiO₂, and the photoactivity was accordingly further enhanced. The stabilized activity was maintained after many times irradiation. It is interesting that after a few hours irradiation the amount of Cu particles on the surface kept unchanged in the presence of Cu₂O and TiO₂. The Cu particles that formed during hydrogen generation reaction play a key role in the further enhancement of the hydrogen production activity. In this study, it is the first time to study the details on the formation of the stable ternary structure under simulated solar irradiation and their synergistic effect on the photoactivity of the water splitting.     

Electrochemical performance of mesoporous TiO2 anatase

Mesoporous TiO₂ was prepared via a sol–gel method from an ethylene glycol-based titanium-precursor in the presence of a non-ionic surfactant at pH 2. Only the anatase structure was detected after annealing, while the BET specific surface area was measured as being 90 m² g⁻¹ with a rather monomodal pore diameter close to 5 nm. Electrochemical performances were investigated by cyclic voltammetry and galvanostatic techniques. Mesoporous TiO₂ exhibits excellent rate capability (184 mAh g⁻¹ at C/5, 158 mAh g⁻¹ at 2C, 127 mAh g⁻¹ at 6C, and 95 mAh g⁻¹ at 30C) and good cycling stability.     

Preferential oxidation of CO in H2 stream on Au/CeO2–TiO2 catalysts

A series of Au catalysts supported on CeO₂–TiO₂ with various CeO₂ contents were prepared. CeO₂–TiO₂ was prepared by incipient-wetness impregnation with aqueous solution of Ce(NO₃)₃ on TiO₂. Gold catalysts were prepared by deposition–precipitation method at pH 7 and 65 °C. The catalysts were characterized by XRD, TEM and XPS. The preferential oxidation of CO in hydrogen stream was carried out in a fixed bed reactor. The catalyst mainly had metallic gold species and small amount of oxidic Au species. The average gold particle size was 2.5 nm. Adding suitable amount of CeO₂ on Au/TiO₂ catalyst could enhance CO oxidation and suppress H₂ oxidation at high reaction temperature (>50 °C). Additives such as La₂O₃, Co₃O₄ and CuO were added to Au/CeO₂–TiO₂ catalyst and tested for the preferential oxidation of CO in hydrogen stream. The addition of CuO on Au/CeO₂–TiO₂ catalyst increased the CO conversion and CO selectivity effectively. Au/CuO–CeO₂–TiO₂ with molar ratio of Cu:Ce:Ti = 0.5:1:9 demonstrated very high CO conversion when the temperature was higher than 65 °C and the CO selectivity also improved substantially. Thus the additive CuO along with the promoter and amorphous oxide ceria and titania not only enhances the electronic interaction, but also stabilizes the nanosize gold particles and thereby enhancing the catalytic activity for PROX reaction to a greater extent.     

Synthesis of g-C3N4/TiO2 with enhanced photocatalytic activity for H2 evolution by a simple method

A photocatalyst composed of graphite-like carbon nitride (g-C₃N₄) and TiO₂ was fabricated by a simple method to calcine the mixture of melamine and TiO₂ precursor. The photocatalyst has enhanced photoactivity for hydrogen evolution from water. Characterization by XRD, FTIR, SEM and elemental analysis showed that the crystal structure and morphologies of composites were affected by the amount of melamine in the composite. The UV–Vis characterization displayed that the optical absorption range of g-C₃N₄/TiO₂ hybrid was broadened with a synergistic effect. The photoactivity for H₂ evolution was shown that the best result obtained from the composite with 67 wt% melamine has about 5 times improvement compared with bare TiO₂ or pure g-C₃N₄. The enhanced photoactivity might be related with the favorable structure resulted from heat-treatment temperature, and the content of g-C₃N₄ participating in wide optical absorption, separation and transportation of electronic-holes, as well as morphology of composite.     

Selective CO oxidation on Cu promoted Pt/Al2O3 and Pt/Nb2O5 catalysts

Pt–Cu catalysts supported on Al₂O₃ and Nb₂O₅ were studied for use in selective CO oxidation. The addition of copper enhanced the activity and selectivity of Pt–Cu/Nb₂O₅ at lower temperatures when compared to Pt/Nb₂O₅. On the other hand, copper addition was not beneficial in the case of Al₂O₃ supported catalysts.     

Study of Pt electrode dissolution in H2O2-containing H2SO4 solution using an electrochemical quartz crystal microbalance

Pt electrode dissolution has been investigated using an electrochemical quartz crystal microbalance (EQCM) in H₂O₂-containing 0.5 mol dm⁻³ H₂SO₄. The Pt electrode weight-loss of ca. 0.4 μg cm⁻² is observed during nine potential sweeps between 0.01 and 1.36 V vs. RHE. In contrast, the Pt electrode weight-loss is negligible without H₂O₂ (<0.05 μg cm⁻²). To support the EQCM results, the weight-decrease amounts of a Pt disk electrode and amounts of Pt dissolved in the solutions were measured after similar successive potential cycles. As a result, these results agreed well with the EQCM results. Furthermore, the H₂O₂ concentration dependence of the Pt weight-decrease rate was assessed by successive potential steps. These EQCM data indicated that the increase in H₂O₂ accelerates the Pt dissolution. Based on these results, H₂O₂ is known to be a major factor contributing to the Pt dissolution.     

CuCr2O4/TiO2 heterojunction for photocatalytic H2 evolution under simulated sunlight irradiation

CuCr₂O₄/TiO₂ heterojunction has been successfully synthesized via a facile citric acid (CA)-assisted sol-gel method. Techniques of X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-vis diffuse reflectance spectrum (UV-vis DRS) have been employed to characterize the as-synthesized nanocomposites. Furthermore, photocatalytic activities of the as-obtained nanocomposites have been evaluated based on the H₂ evolution from oxalic acid solution under simulated sunlight irradiation. Factors such as CuCr₂O₄ to TiO₂ molar ratio in the composites, calcination temperature, photocatalyst mass concentration, and initial oxalic acid concentration affecting the photocatalytic hydrogen producing have been studied in detail. The results showed that the nanocomposite of CuCr₂O₄/TiO₂ is more efficient than their single part of CuCr₂O₄ or TiO₂ in producing hydrogen. The optimized composition of the nanocomposites has been found to be CuCr₂O₄·0.7TiO₂. And the optimized calcination temperature and photocatalyst mass concentration are 500 °C and 0.8 g l⁻¹, respectively. The influence of initial oxalic acid concentration is consistent with the Langmuir model.     

Electrospun TiO2/SnO2 nanofibers with innovative structure and chemical properties for highly efficient photocatalytic H2 generation

Innovative TiO₂/SnO₂ nanofibers were fabricated via electrospinning an innovated precursor solution and used for photocatalytic H₂ generation. The nanofibers exhibited greatly enhanced H₂ evolution rate compared to bare TiO₂ nanofiber and P25. The enhanced efficiency of the TiO₂/SnO₂ nanofibers was attributed to its excellent synergistic properties: (1) its good mesoporosity; (2) the red-shift of absorbance spectra to enhance light absorbance capability; (3) its long nanofibrous structure and (4) anatase TiO₂ – rutile TiO₂ – rutile SnO₂ ternary junctions favorable for the separation of electrons and holes. Based on our experimental results, the optimum ratio of TiO₂/SnO₂ nanofibers with 3% Sn demonstrated the highest efficiency in H₂ generation.     

Low-temperature preparation of AgIn5S8/TiO2 heterojunction nanocomposite with efficient visible-light-driven hydrogen production

AgIn₅S₈ and AgIn₅S₈/TiO₂ heterojunction nanocomposite with efficient photoactivity for H₂ production were prepared by a low-temperature water bath deposition process. The resultant AgIn₅S₈ shows an absorption edge at ∼720 nm, corresponding to a bandgap of ∼1.72 eV, and its visible-light-driven photoactivity (100.1 μmol h⁻¹) for H₂ evolution is 9 times higher than that (11 μmol h⁻¹) of the product derived from a hydrothermal process, while the obtained AgIn₅S₈/TiO₂ heterojunction nanocomposites prepared by using commercially available TiO₂ nanoparticles (P25) as TiO₂ source exhibit remarkably improved photoactivity as compared to the pristine AgIn₅S₈, and the AgIn₅S₈/TiO₂ nanocomposite with molar ratio of 1:10 shows a maximum photocatalytic H₂ evolution rate (371.1 μmol h⁻¹), which is 4.3 times higher than that (85 μmol h⁻¹) of the corresponding AgIn₅S₈/TiO₂ nanocomposite derived from a hydrothermal method. This significant enhancement in the photocatativity of the present AgIn₅S₈/TiO₂ nanocomposite can be ascribed to the better dispersion of the AgIn₅S₈ formed on TiO₂ nanoparticle surfaces and the more intimate AgIn₅S₈/TiO₂ heterojunction structure during the water bath deposition process under continuously stirring as compared to the corresponding nanocomposite derived from a hydrothermal method. This configuration of nanocomposite results in fast diffusion of the photogenerated carriers in AgIn₅S₈ towards TiO₂, which is beneficial for separating spatially the photogenerated carriers and improving the photoactivity. The present findings shed light on the tuning strategy of spectral responsive region and photoactivity of photocatalysts for efficient light-to-energy conversion.