首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
在半绝缘GaAs衬底上制作了AlAs/GaAs/In0.1Ga0.9As/GaAs/AlAs双势垒共振隧穿二极管.在GaAs层中加入In0.1Ga0.9As层用以降低势垒两边的势阱深度,从而提高了器件的峰谷电流比和峰电流密度.为了减小器件的接触电阻和电流的非均匀性,使用了独特形状的集电极,总的电流密度也因此提高.薄栅也有助于提高器件的PVCR和峰电流密度.在室温下测得其峰谷电流比高达13.98,峰电流密度大于89kA/cm2.  相似文献   

2.
王伟  孙浩  滕腾  孙晓玮 《半导体学报》2012,33(12):124002-4
利用空气桥工艺设计和制作了高掺杂发射区In0.53Ga0.47As/AlAs共振隧穿二极管(RTD)。在室温下,器件的峰谷电流比大于40,峰值电流密度为24kA/cm2。建立了RTD器件等效电路模型,并从直流和微波测试结果中提取出器件参数。高峰谷电流比的RTD器件具有非常小的电容,有利于在微波/太赫兹领域中的应用。  相似文献   

3.
设计了一种带有Al0.22Ga0.78As/In0.15Ga0.85As/GaAs发射极空间层和GaAs/In0.15Ga0.85As/GaAs量子阱的共振隧穿二极管(RTD)材料结构,并且成功地制作了相应的RTD器件.在室温下,测试了RTD器件的直流特性,计算了RTD器件的峰谷电流比和可资电流密度.在分析器件特性的基础上,指出调整材料结构和优化工艺参数将进一步提高RTD器件的性能.  相似文献   

4.
报道了InP衬底AlAs /In0.53Ga0.47As/AlAs结构共振隧穿二极管(RTD)的研制过程.衬底片选用(001)半绝缘InP单晶片,结构材料使用分子束外延(MBE)技术制备,并用PL谱对外延片进行测试,器件采用台面结构.测得RTD器件室温下的峰谷电流比(PVCR)为7.4,峰值电流密度(Jp)为1.06×105A/cm-2,是国内首例成功的InP材料体系RTD.  相似文献   

5.
基于共振隧穿理论的GaAs基RTD的设计与研制   总被引:1,自引:1,他引:0  
以共振能级的透射系数半峰宽(FWHM)做为共振隧穿二极管(RTD)材料结构设计的依据,对GaAs/AlAs/In0.1Ga0.9As材料体系的RTD进行了设计.用分子束外延(MBE)进行了RTD结构材料制备,X射线双晶衍射(XRD)分析表明,制备的异质结界面光滑、层厚准确.RTD采用台面结构,器件特性测试结果表明,峰值...  相似文献   

6.
利用分子束外延技术研制出InP基IhAs/In0.53Ga0.47As/AlAs共振隧穿二极管,其中势垒为10个单分子AlAs,势阱由8个单分子层In0.53Ga0.47As阱和4个单分子层InAs子阱组成.室温下峰值电流密度接近3kA/cm2,峰和谷的电流密度比率达到19.  相似文献   

7.
利用分子束外延技术研制出InP基IhAs/In0.53Ga0.47As/AlAs共振隧穿二极管,其中势垒为10个单分子AlAs,势阱由8个单分子层In0.53Ga0.47As阱和4个单分子层InAs子阱组成.室温下峰值电流密度接近3kA/cm2,峰和谷的电流密度比率达到19.  相似文献   

8.
报道了InP衬底AlAs/In0.53Ga0.47As/AlAs两垒一阱结构共振隧穿二极管(RTD)器件的研制.结构材料由分子束外延制备,衬底片为(001)半绝缘InP单晶片,器件制作选用台面结构.测得室温下的峰值电流密度为1.06×105 A/cm2,峰-谷电流比为7.4,是国内报道的首例InP材料体系RTD器件.  相似文献   

9.
报道了InP衬底AlAs/In0.53Ga0.47As/AlAs两垒一阱结构共振隧穿二极管(RTD)器件的研制.结构材料由分子束外延制备,衬底片为(001)半绝缘InP单晶片,器件制作选用台面结构.测得室温下的峰值电流密度为1.06×105 A/cm2,峰-谷电流比为7.4,是国内报道的首例InP材料体系RTD器件.  相似文献   

10.
对基于Top-Down加工技术的纳米电子器件如:单电子器件、共振器件、分子电子器件等的研究现状、面临的主要挑战等进行了讨论.采用CMOS兼容的工艺成功地研制出单电子器件,观察到明显的库仑阻塞效应;在半绝缘GaAs衬底上制作了AlAs/GaAs/In0.1 Ga0.9As/GaAs/AlAs双势垒共振隧穿二极管,采用环型集电极和薄势垒结构研制的共振隧穿器件,在室温下测得其峰谷电流比高达13.98,峰电流密度大于89kA/cm2;概述了交叉阵列的分子存储器的研究进展.  相似文献   

11.
12.
《Spectrum, IEEE》2004,41(6):24-25
A flash mob is a group of strangers, organized over the Internet, that comes together briefly, acts out a predetermined scenario-often something as simple as clapping for 30 seconds-and then disperses. A supercomputer is a very fast and powerful computer that outperforms most mainframes, at a cost, typically, of millions of dollars. Can a flash mob build a supercomputer? It can sure try, and so it did on 3 April at the University of San Francisco's Koret athletic center. The goal was to run the Linpack benchmark, a standard method of assessing the speed of supercomputers, to achieve a speed of at least 403 gigaflops (billion floating point operations per second). This would be fast enough to earn the system a place on the list of the world's fastest 500 supercomputers. The goal was not reached. The group reached just 180 gigaflops before it was time to pack up the computers and go home. However, even though the San Francisco effort fell short of speed goal, it did ignite imaginations.  相似文献   

13.
去年的这个时候,供货商们还在为生存而挣扎。如今,2009年的年报已经公布,许多供应商的年报业绩之好,就连最乐观的分析师也始料未及。这种变化的原因很简单:供应商们大幅削减成本,接下来是强劲的需求,这又导致了随后高企的设备利用率。  相似文献   

14.
《IEE Review》2005,51(1):24-25
Aircraft giants Boeing and Airbus are pinning their hopes on very different visions of how air travel will evolve in the coming decade.  相似文献   

15.
高分辨电子显微像的定量分析与应用* II.InGaAs/GaAs   总被引:41,自引:0,他引:41  
  相似文献   

16.
《Mechatronics》2006,16(8):461-469
Robots may be expected to execute some tasks in cooperation with humans. Control systems for such robots should be appropriate to adapt to human characteristics in order to successfully accomplish the task. Pushing a cart on a frictionless plane in cooperation with a human is a basic example to such a task. To control the motion of an object from one point to another on a frictionless plane is impossible by only pushing in one direction without supporting it in the opposite direction, since as soon as the force is applied, the object will move without stopping its motion. In this paper, compliant cooperative positioning of a cart on a frictionless plane by a human and a manipulator is proposed using impedance control method with the parameters obtained from human–human cooperation.  相似文献   

17.
安良 《压电与声光》2022,44(2):323-326
为了降低微流分析成本,该文提出了基于智能手机检测压电基片上目标微液滴方法,并开发出相应的应用软件,通过分析微液滴颜色信息和几何信息定位目标微液滴位置,结合分析时间获取微液滴输运速度。为验证提出方法的正确性,以5 μL黑色墨水溶液微液滴为研究对象,进行压电基片上微液滴识别和位置分析实验。结果表明,该文所提方法和开发的应用软件可识别和定位压电基片上微液滴,在功率为27.5 dBm时,第2~10 s段内微液滴输运速度为0.416 mm/s。  相似文献   

18.
A field matching analysis of a coaxial-to-waveguide adaptor incorporating a disc-ended probe and a tuning post is presented. In this analysis, the tuning post is considered as a short-circuited second probe. A computer algorithm for calculating the input impedance of this structure is developed. This algorithm is used to investigate and improve the operation of a commercially available coaxial-to-waveguide adaptor  相似文献   

19.
Transmission-Line Properties of a Strip on a Dielectric Sheet on a Plane   总被引:3,自引:0,他引:3  
The subject is a strip Iine formed of a strip and a parallel ground plane separated by a dielectric sheet (commonly termed "microstrip"). Building on the author's earlier papers all the significant properties are formulated in explicit form for practical applications. This may mean synthesis and/or analysis. Each formula is a close approximation for all shape ratios, obtained by a gradual transition between theoretical forms for the extremes of narrow and wide strips. The effect of thickness is formulated to a second-order approximation. Then the result is subjected to numerical differentiation for simple evaluation of the magnetic-loss power factor from the skin depth. The transition formulas are tested against derived formulas for overlapping narrow and wide ranges of shape. Some of these formulas are restated from the earlier derivations and others are derived herein. The latter include the second-order approximation for a narrow thin strip, and a close approximation for a narrow or wide square cross section in comparison with a circular cross section. Graphs are given for practical purposes, showing the wave resistance and magnetic loss for a wide range of shape and dielectric. For numerical reading, the formulas are suited for programming on a digital pocket calculator.  相似文献   

20.
设计师们通常使用0mA~20mA和0V~10V的隔离输入作为工业应用控制的信号.由隔离电源、Analog Devices AD7400调制器内置隔离及TexasInstruments MSP430微控制器共同为工业设计师要求的一种完整、隔离且可靠的模拟信号接口创建一种设计.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号