Liquid–liquid extraction of copper(II)–EDTA chelated anions with microporous hollow fibers

The rates of extraction of Cu(II)–EDTA (ethylenediaminetetraacetic acid) chelated anions from aqueous solutions across microporous hollow fibers to kerosene solutions of Aliquat 336 (a quaternary amine) were measured. Experiments were performed as a function of aqueous pH, the chelated anion concentration, the organic amine concentration, and temperature. From experiments performed on the temperature dependence of extraction rate, it was shown that the resistance of interfacial chemical reaction was negligible. It was shown that the extraction rate increased with increasing concentrations of both the chelated anions and the amine. However, the aqueous pH had little effect on extraction rate under the ranges studied. The mass transfer mechanism of this extraction process was also discussed. © 2000 Society of Chemical Industry     

Thiosemicarbazone Salicylaldiminato‐Palladium(II)‐Catalyzed Mizoroki–Heck Reactions

Four tridentate thiosemicarbazone salicylaldiminato‐palladium(II) complexes of the general formula [Pd(saltsc‐R)PPh₃] [saltsc=salicylaldehyde thiosemicarbazone; R=H ( 1 ), 3‐tert‐butyl ( 2 ), 3‐methoxy ( 3 ), 5‐chloro ( 4 )], have been evaluated as catalyst precursors for the Mizoroki–Heck coupling reaction between a variety of electron‐rich and electron‐poor aryl halides and olefins. The palladium complexes (0.1–1 mol% loading) were found to effectively catalyze these reactions with high yields being obtained when aryl iodides and aryl bromides were utilized. The effects of base, catalyst loading, reaction temperature and reaction time on the catalytic activity of the most active complex were also investigated.     

Aerobic oxidative polymerization of 2,6‐dimethylphenol in water with a highly efficient copper(II)– poly(N‐vinylimidazole) complex catalyst

A Cu(II)–poly(N‐vinylimidazole) (PVI) complex was prepared and used to catalyze the oxidative polymerization of 2,6‐dimethylphenol (DMP) to form poly(2,6‐dimethyl‐1,4‐phenylene oxide) (PPO) in water. The stoichiometric ratio between imidazole groups in PVI and copper ions was found to be 4 when continuous variation analysis was applied. Compared with a conventional Cu(II)–low‐molecular‐weight ligand complex, a high catalytic efficiency was observed in the polymerization of DMP catalyzed by the Cu(II)–PVI complex. The influence of the Cu(II)–PVI complex concentration and imidazole/Cu(II) molar ratio on the oxidative polymerization of DMP was studied. Both the yield and molecular weight of PPO increased significantly with the catalyst concentration and decreased with the imidazole/Cu(II) molar ratio. The molecular weight of PVI also played an important role in the improvement of the catalytic efficiency. The high catalytic efficiency of the Cu(II)–PVI complex may have been due to the concentration effect of the catalyst and substrate. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

New polymeric structures designed for the removal of Cu(II) ions from aqueous solutions

New polymeric structures obtained by chemical transformations of maleic anhydride/dicyclopentadiene copolymer with triethylenetetraamine, p‐aminobenzoic acid, and p‐aminophenylacetic acid were used for the removal Cu(II) ions from aqueous solutions. The experimental values prove the importance of the chelator nature and of the macromolecular chain geometry for the retention efficiency. The retention efficiency (η_r), the retention capacity (Q _e ), and the distribution coefficient of the metal ion into the polymer matrix (K _d ) are realized by evaluation of residual Cu(II) ions in the effluent waters, by atomic adsorption. Also are discussed the influence of pH, the thermal stability of the polymer, and their polymer–metal complex, as well as the particular aspects regarding the contact procedure and the batch time. Based on the polymers and polymer–metal complexes characterization a potential retention mechanism is proposed. All polymer supports as well theirs metal–complexes are characterized by ATD and FTIR measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1397–1405, 2007     

Separation of gold(III) ions from copper(II) and zinc(II) ions using thiourea–formaldehyde or urea–formaldehyde chelating resins

Thiourea–formaldehyde (TF) and urea–formaldehyde (UF) chelating resins were synthesized and these resins were used in the separation of gold(III) ions from copper(II) and zinc(II) base metal ions. In the experimental studies, the effect of acidity on gold(III) uptake and gold(III) adsorption capacities by batch method, and loading and elution profiles of gold(III) ions, gold(III), copper(II), and zinc(II), dynamic adsorption capacities and the stability tests of TF and UF resins by column method were examined. By batch method, the optimum acidities were found as pH 2 and 0.5M HCl, and gold(III) adsorption capacities in the solutions including copper(II) and zinc(II) ions were obtained as 0.088 and 0.151 meq Au(III)/g for UF and TF resins, respectively. On the other hand, by column method, the dynamic adsorption capacities were calculated as 0.109 meq Au(III)/g with TF, 0.023 meq Au(III)/g with UF, 0.015 meq Cu(II)/g with TF, 0.0057 meq Cu(II)/g with UF, and under 6.1 × 10^?5 meq Zn(II)/g with TF or UF. TF resin was more effective in the separation and the concentration of gold(III) ions from copper(II) and zinc(II) ions than UF resin. It was seen that sulfur atoms contributed the gold(III) adsorption comparing with oxygen atoms. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Kinetic investigation of the NO decomposition over V–O–W/Ti(Sn)O2 catalyst

A kinetic study of the NO decomposition over V–O–W/Ti(Sn)O₂ catalyst carried out in a tubular fixed-bed reactor operating under atmospheric pressure at different temperatures and at various space times is presented. Assuming that NO decomposition occurs as a result of electron transfer from the metal active site to antibonding π NO orbital, several kinetic models were derived and applied to describe the kinetics of reaction. The best agreement between the experimental data and theoretical prediction was achieved with the model assuming adsorption of NO on the active sites as the rate-determining step. Finally, it was concluded that V–O–W/Ti(Sn)O₂ catalyst has promising activity for the NO removal in O₂ presence from the effluent gases of the different sources of emission.     

Confined crystallization morphology of poly(ϵ‐caprolactone) block within poly(ϵ‐caprolactone)–poly(l‐lactide) copolymers

The confined crystallization of poly(?‐caprolactone) (PCL) block in poly(?‐caprolactone)–poly(l ‐lactide) (PCL‐PLLA) copolymers was investigated using differential scanning calorimetry, polarized optical microscopy, scanning electronic microscopy and atomic force microscopy. To study the effect of crystallization and molecular chain motion state of PLLA blocks in PCL‐PLLA copolymers on PCL crystallization morphology, high‐temperature annealing (180 °C) and low‐temperature annealing (80 °C) were applied to treat the samples. It was found that the crystallization morphology of PCL block in PCL‐PLLA copolymers is not only related to the ratio of block components, but also related to the thermal history. After annealing PCL‐PLLA copolymers at 180 °C, the molten PCL blocks are rejected from the front of PLLA crystal growth into the amorphous regions, which will lead to PCL and PLLA blocks exhibiting obvious fractionated crystallization and forming various morphologies depending on the length of PLLA segment. On the contrary, PCL blocks more easily form banded spherulites after PCL‐PLLA copolymers are annealed at 80 °C because the preexisting PLLA crystal template and the dangling amorphous PLLA chains on PCL segments more easily cause unequal stresses at opposite fold surfaces of PCL lamellae during the growth process. Also, it was found that the growth rate of banded spherulites is less than that of classical spherulites and the growth rate of banded spherulites decreases with decreasing band spacing. © 2019 Society of Chemical Industry     

An unusual dichromium(II,II) compound bearing di-2-pyridyl ketone oximate ligands and prepared by the ligand-assisted reduction of a trichromium(III,III,III) complex in air

The reaction of the oxide-centred triangular, trichromium(III,III,III) complex [Cr₃O(O₂CCMe₃)₆(H₂O)₃](O₂CCMe₃) with di-2-pyridyl ketone oxime, (py)₂CNOH, in MeCN under aerobic and refluxing conditions yields the pivalate-free, dichromium(II,II) complex [Cr₂{(py)₂CNO}₄] · 2H₂O (1 · 2H₂O). The dinuclear complex can also be prepared by the reaction of [Cr(CO)₆] with (py)₂CNOH in refluxing MeCN/H₂O in air. The two high-spin Cr^II atoms are doubly bridged by two 2.1110 oximate ligands, while a chelating 1.0110 (py)₂CNO⁻ ion completes distorted trigonal bipyramidal coordination at each metal centre. The dimers are stabilized by intramolecular stacking interactions between the terminal (py)₂CNO⁻ ligands, and the structural effects of these interactions are discussed.     

Palladium(II)‐Catalyzed Hydration of Alkynylphosphonates to β‐Ketophosphonates

A highly efficient palladium(II)‐catalyzed hydration of a wide range of alkynylphosphonates to the corresponding β‐ketophosphonates has been developed to give high yields at 80 °C in 1, 4‐dioxane, with no acidic or alkaline cocatalysts required. The described catalytic system should provide an efficient alternative to highly toxic mercury‐catalyzed methodologies and be useful in synthetic programs.     

Synthesis and structures of dinuclear copper(II) complex and μ-phenolatotetrazinc(II) complex with 1,3-diphenyl-4-(salicylidene hydrazone)-phenylethylene-pyrazolone-5

Novel dinuclear copper(II) complex and phenoxy-bridged tetranuclear zinc(II) complex with 1,3-diphenyl-4-(salicylidene hydrazone)-phenylethylene-pyrazolone-5 (DPPeP-SAH) have been synthesized and characterized by X-ray crystallography. The X-ray diffraction analyses of the complexes show that two Cu(II) centers are bonded with two tetradentated ligands and the geometries around the central ions are slightly distorted square planar, while in zinc(II) complex central metal ions are held together by four μ-phenoxo bridges that lead to the formation of the tetra-μ-phenolatotetrazinc(II) centers.     

Novel Assemblies of Sn(II) Coordinated Polyimide Supported by a Ligand Containing N-Heterocyclic Phenantroline Unit

The purpose of this work is to investigate the possibility of the production of novel metal coordinated polyimides. This research primarily focuses on novel metal complex assemblies of Sn(II) linked to the polymer molecule by a ligand containing an N-heterocyclic phenantroline unit in the main chain. Polyimide with phenantroline units in the main chain was synthesized utilizing condensation polymerization of aromatic dianhyrides and the bis(5-aminophenantroline)dichlorotin(II) to yield metal coordinated polyimides. Characterization by thermal analysis, refractive index, and dielectric analysis revealed distinct differences between these new materials and the classical polyimides.     

Bis(dipyridophenazine)(2‐(2′‐pyridyl)pyrimidine‐4‐carboxylic acid)ruthenium(II) Hexafluorophosphate: A Lesson in Stubbornness

Ruthenium complexes are currently considered to be among the most promising alternatives to platinum anticancer drugs. In this work, thirteen structural analogues and organelle/receptor‐targeting peptide bioconjugates of a cytotoxic bis(dppz)‐Ru^II complex [Ru(dppz)₂(CppH)](PF₆)₂ ( 1 ) were prepared, characterized, and assessed for their cytotoxicity and cellular localization (CppH=2‐(2′‐pyridyl)pyrimidine‐4‐carboxylic acid; dppz=dipyrido[3,2‐a:2′,3′‐c]phenazine). It was observed that structural modifications (lipophilicity, charge, and size‐based) result in the cytotoxic potency of 1 being compromised. Confocal microscopy studies revealed that unlike 1 , the screened complexes/bioconjugates do not have a preferential accumulation in mitochondria. The results of this important structure–activity relationship strongly support our initial hypothesis that accumulation in mitochondria is crucial for 1 to exert its cytotoxic action.     

Nonaqueous emulsion copolymerization of ethyl methacrylate/lauryl methacrylate in propylene glycol. II. Adsorption of poly(ethylene oxide)–polystyrene–poly(ethylene oxide) triblock copolymer on latex particles

The adsorption behavior of various poly(ethylene oxide)–polystyrene–poly(ethylene oxide) (PEO‐PS‐PEO) triblock copolymer (TBC) s on acrylic latex particles in propylene glycol was studied. The composition of the PEO‐PS‐PEO triblock polymers varied from 41 to 106 in each PEO block length and from 18 to 41 in the PS block length. The location of the PEO‐PS‐PEO TBC was determined by analyzing for the physically adsorbed amount on the latex surface, the anchored mount on the surface, the entrapped amount inside the particle, and the “free” PEO‐PS‐PEO TBCs in the propylene glycol. A contour graph technique was applied to analyze the experimental data, which showed that a minimum existed for the physically adsorbed portion at a PS block length of about 30 units. When the PS block length was less than 30 units, the adsorption decreased with increasing PS block length, indicating rearrangement of mixed PEO brush and adsorbed PS block. When the PS block was greater than 30 units, the adsorption increased with increasing block length because of the poor solvency of the PS block in the propylene glycol medium, resulting in a collapse of the PS chain. Considering the binding energy between the PS block and the latex particle surface, which governs adsorption, it was hypothesized that a lower block length limit exists, below which no adsorption takes place. The solubility of the PS block in propylene glycol guides the important upper block length limit. The anchored fraction of the block copolymer increased continuously with increasing PS block length in the entire region investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1963–1975, 2001     

Chemical Synthesis of the Epimeric (23R)‐ and (23S)‐Fluoro Derivatives of Bile Acids via Horner–Wadsworth–Emmons Reaction

A method for the synthesis of two (23R)‐ and (23S)‐epimeric pairs of 23‐fluoro‐3α,7α,12α‐trihydroxy‐5β‐cholan‐24‐oic acid and 23‐fluoro‐3α,7α‐dihydroxy‐5β‐cholan‐24‐oic acid is described. The key intermediates, 23,24‐dinor‐22‐aldehyde peracetates were prepared from cholic and chenodeoxycholic acids via the 24‐nor‐22‐ene, 24‐nor‐22ξ,23‐epoxy, and 23,24‐dinor‐22‐aldehyde derivatives. The Horner–Wadsworth–Emmons reaction of the 23,24‐dinor‐22‐aldehydes using triethyl 2‐fluoro‐2‐phosphonoacetate in the presence of LiCl and 1,8‐diazabicyclo[5,4,0]undec‐7‐ene (DBU), and subsequent hydrogenation of the resulting 23ξ‐fluoro‐22‐ene ethyl esters, followed by hydrolysis, gave a mixture of the epimeric (23R)‐ and (23S)‐fluorinated bile acids which were resolved efficiently by preparative RP‐HPLC. The stereochemical configuration of the fluorine atom at C‐23 in the newly synthesized compounds was confirmed directly by the X‐ray crystallographic data. The ¹H and ¹³C NMR spectral differences between the (23R)‐ and (23S)‐epimers were also discussed.     

Synthesis and properties of novel aromatic poly(ester–amide)s derived from 1,5‐bis(3‐aminobenzoyloxy)naphthalene and aromatic dicarboxylic acids

A new naphthalene‐ring‐containing bis(ester–amine), 1,5‐bis(3‐aminobenzoyloxy)naphthalene, was prepared from the condensation of 1,5‐dihydroxynaphthalene with 3‐nitrobenzoyl chloride followed by catalytic hydrogenation. A series of novel naphthalene‐containing poly(ester–amide)s was synthesized by direct phosphorylation polyamidation from this bis(ester–amine) with various aromatic dicarboxylic acids. The polymers were produced in high yields and had moderate inherent viscosities of 0.47–0.81 dL g^?1. The poly(ester–amide) derived from terephthalic acid was semicrystalline and showed less solubility. Other polymers derived from less rigid and symmetrical diacids were amorphous and readily soluble in most polar organic solvents and could be solution‐cast into transparent, flexible and tough films with good mechanical properties. The amorphous poly(ester–amide)s displayed well‐defined glass transition temperatures of between 179 and 225 °C from differential scanning calorimetry and softening temperatures of between 178 and 211 °C from thermomechanical analysis. These poly(ester–amide)s did not show significant decomposition below 400 °C in nitrogen or air. Copyright © 2004 Society of Chemical Industry     

Synthesis,characterization and antibacterial activity of Pd(II), Pt(II) and Ag(I) complexes of 4-ethyl and 4-(p-tolyl)-1-(pyridin-2-yl)thiosemicarbazides

Pd(II), Pt(II) and Ag(I) ions were found to form stable complexes with 4-(p-tolyl)- or 4-ethyl-1-(pyridin-2-yl)thiosemicarbazides (Hp-TPTS or HEPTS). The complex structure was elucidated by analysis (elemental and thermal), spectroscopy (electronic, IR and ¹H NMR spectra) and physical measurements (magnetic susceptibility and molar conductance). The ligands coordinate to the metal ions as monobasic bidentate through nitrogen and sulfur atoms. The electronic spectra of the Pt(II) complexes in DMF showed a metal to ligand charge transfer transition at 11,935–13,260 cm^?1. The structural, electronic and vibrational features of HEPTS and Hp?TPTS were discussed on the basis of semi-empirical quantum mechanic calculations [ZINDO/S and semi-empirical parameterization (PM3)]. The simulated IR and electronic spectra are found reasonable in accordance with the experimental data. Finally, the antibacterial activities of the ligands and their complexes were investigated and some were found promising.     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006     

Oxadiazoline and Ketoimine Palladium(II) Complexes as Highly Efficient Catalysts for Suzuki–Miyaura Cross‐Coupling Reactions in Supercritical Carbon Dioxide

The [2+3] cycloaddition of nitriles (RCN) with 2,2‐dimethyl‐3,4‐dihydro‐2H‐pyrrole 1‐oxide, in the presence of palladium dichloride (PdCl₂) gives the corresponding 2,3‐dihydro[1.2.4]oxadiazole (Δ⁴‐1,2,4‐oxadiazoline) palladium(II) complexes 1 – 4 in good yields. However, the Pd(II)‐assisted reaction of pentafluorobenzonitrile with the same pyrroline N‐oxide gives a mixture of oxadiazoline 5 , ketoimine 6 and pyrrolylbenzamide‐ketoimine 7 Pd(II) complexes, which affords upon heating in refluxing acetone the unprecedented fused tricyclic ketoimine complex 8 as the exclusive product. Under heating, compounds 5 and 7 transform to 6 , the latter undergoing intramolecular cyclization by nucleophilic attack of the amino moiety to the ortho carbon of the pentafluorophenyl ring leading ultimately to 8 . The compounds were characterized by IR, ¹H and ¹³C NMR, ESI⁺‐MS, elemental analyses and, in the cases of 3 , 6 , 7 and 8 , also by X‐ray diffraction analyses. The catalytic properties of the Pd complexes were evaluated in Suzuki–Miyaura cross‐coupling reactions, using supercritical carbon dioxide (scCO₂) as a green solvent. Cross‐couplings of aryl halides with phenylboronic acid give the desired biaryl products in quantitative yields, in a short reaction time, for substrate‐to‐catalyst molar ratios as high as 4.0⋅10⁴.     

Mn and Cu–Na coordination compounds containing the tetrazole-5-acetato anion (tza) ligands

Two novel coordination compounds [Mn(tza) · (H₂O)₂]_n (1) and [CuNa₂(tza)₂ · (H₂O)₄]_n (2) (tza = tetrazole-5-acetato) were synthesized by reaction of tetrazole-5-ethyl acetate with Mn(ClO₄)₂ · 6H₂O and CuCl₂ · 2H₂O in sodium hydroxide solution, respectively. Compound 1 has a one-dimensional (1D) polymeric chain that are bridged by tza linker, while compound 2 has two crystallographically independent metal centers (Cu and Na), that are bridged by tza into a 2D layer structure. The magnetic susceptibility study of 1 demonstrates the presence of antiferromagnetic interaction between two adjacent Mn(II) ions.