Short channel field-effect transistors from highly enriched semiconducting carbon nanotubes

Semiconducting single-walled carbon nanotubes (s-SWNTs) with a purity of ∼98% have been obtained by gel filtration of arc-discharge grown SWNTs with diameters in the range 1.2–1.6 nm. Multi-laser Raman spectroscopy confirmed the presence of less than 2% of metallic SWNTs (m-SWNTs) in the s-SWNT enriched sample. Measurement of ∼50 individual tubes in Pd-contacted devices with channel length 200 nm showed on/off ratios of >10⁴, conductances of 1.38–5.8 μS, and mobilities in the range 40–150 cm²·V/s. Short channel multi-tube devices with ∼100 tubes showed lower on/off ratios due to residual m-SWNTs, although the on-current was greatly increased relative to the devices made from individual tubes.      

Unexpected hole transfer leads to high efficiency single-walled carbon nanotube hybrid photovoltaic

We report surprisingly efficient photocurrent generation at individual single-walled carbon nanotube (SWNT) /poly(3-hexylthiophene-2,5-diyl) (P3HT) junctions. Contrary to previous prediction, both semiconducting SWNTs (s-SWNTs) and metallic SWNTs (m-SWNTs) function as efficient hole acceptors. By active tuning of SWNTs' Fermi level, we confirm that P3HT p-dopes both s-SWNT and m-SWNT, and the work function difference between the nanotube and P3HT leads to a built-in voltage driving the efficient exciton dissociation and hole transfer. We further demonstrate square millimeter scale SWNT/P3HT bilayer photovoltaics using horizontally aligned SWNT arrays. Importantly, the devices exhibit greater than 90% effective external quantum efficiency. These key findings will not only enhance our knowledge of photocurrent generation at nanoscale interfaces, but also make selective omission of m-SWNT redundant, promising carbon nanomaterial-based, low-cost, high-efficiency hybrid photovoltaics.     

Water-assisted self-sustained burning of metallic single-walled carbon nanotubes for scalable transistor fabrication

Nano Research - Although aligned arrays of semiconducting single-walled carbon nanotubes (s-SWNTs) are promising for use in next-generation electronics owing to their ultrathin bodies and ideal...     

A general approach for high yield fabrication of CMOS-compatible all-semiconducting carbon nanotube field effect transistors

We report strategies to achieve both high assembly yield of carbon nanotubes at selected positions of the circuit via dielectrophoresis (DEP) and field effect transistor (FET) yield using an aqueous solution of semiconducting-enriched single-walled carbon nanotubes (s-SWNTs). When the DEP parameters were optimized for the assembly of individual s-SWNTs, 97% of the devices showed FET behavior with a maximum mobility of 210 cm2 V(-1) s(-1), on-off current ratio ～10(6) and on-conductance up to 3 μS, but with an assembly yield of only 33%. As the DEP parameters were optimized so that one to five s-SWNTs are connected per electrode pair, the assembly yield was almost 90%, with ～90% of these assembled devices demonstrating FET behavior. Further optimization gave an assembly yield of 100% with up to 10 SWNTs per site, but with a reduced FET yield of 59%. Improved FET performance including higher current on-off ratio and high switching speed were obtained by integrating a local Al2O3 gate to the device. Our 90% FET with 90% assembly yield is the highest reported so far for carbon nanotube devices. Our study provides a pathway which could become a general approach for the high yield fabrication of complementary metal oxide semiconductor (CMOS)-compatible carbon nanotube FETs.     

Simple fabrication of carbon/TiO2 composite nanotubes showing dual functions with adsorption and photocatalytic decomposition of Rhodamine B

Carbon/TiO2 composite nanotubes were fabricated via a very simple electrospinning process and their dual functionalities of adsorptivity and photocatalytic activity were evaluated using Rhodamine B (RhB) as a model organic pollutant. A poly(vinyl alcohol) (PVA) aqueous solution was directly electrospun into a coagulation bath containing titanium (IV) tetraisopropoxide (TTIP) solution so that PVA-core/TiO2-shell composite nanofibers were formed through the in situ sol-gel reaction of TTIP. The carbon/TiO2 composite nanotubes were then fabricated by heat treatment of composite nanofibers under nitrogen atmosphere. By using several characterization methods, we confirmed that the resultant nanotubes consisted of anatase TiO2 nanocrystallites embedded in a carbonaceous matrix. The prepared nanotubes exhibited fast adsorption of RhB with high capacity compared with a commercial porous carbon, and they also showed the photocatalytic decomposition activity for the dye molecules under UV irradiation comparable to the degradation by P-25 and ST-01 (commercial TiO2). Finally, the carbon/TiO2 composite nanotubes exhibited several cycle performances of adsorption-photodegradation for RhB. This indicates that the composite nanotubes can adsorb and photodecompose organic pollutants repeatedly without additional activating processes.     

Absorption spectroscopy of individual single-walled carbon nanotubes

Current methods for producing single-walled carbon nanotubes (SWNTs) lead to heterogeneous samples containing mixtures of metallic and semiconducting species with a variety of lengths and defects. Optical detection at the single nanotube level should thus offer the possibility to examine these heterogeneities provided that both SWNT species are equally well detected. Here, we used photothermal heterodyne detection to record absorption images and spectra of individual SWNTs. Because this photothermal method relies only on light absorption, it readily detects metallic nanotubes as well as the emissive semiconducting species. The first and second optical transitions in individual semiconducting nanotubes have been probed. Comparison between the emission and absorption spectra of the lowest-lying optical transition reveal mainly small Stokes shifts. Side bands in the near-infrared absorption spectra are observed and assigned to exciton-phonon bound states. No such sidebands are detected around the lowest transition of metallic nanotubes.     

Carbon nanotube-based functional materials for optical limiting

Optical limiting is an important application of nonlinear optics, useful for the protection of human eyes, optical elements, and optical sensors from intense laser pulses. An optical limiter is such a device that strongly attenuates high intensity light and potentially damaging light such as focused laser beams, whilst allowing for the high transmission of ambient light. Optical limiting properties of carbon nanotube suspensions, solubilized carbon nanotubes, small molecules doped carbon nanotubes and polymer/carbon nanotube composites have been reviewed. The optical limiting responses of carbon nanotube suspensions are shown to be dominated by nonlinear scattering as a result of thermally induced solvent-bubble formation and sublimation of the nanotubes, while the solubilized carbon nanotubes optically limit through nonlinear absorption mechanism and exhibit significant solution-concentration-dependent optical limiting responses. In the former case the optical limiting results are independent of nanotube concentrations at the same linear transmittance as that of the solubilized systems. Many efforts have been invested into the research of polymer/carbon nanotube composites in an attempt to allow for the fabrication of films required for the use of nanotubes in a real optical limiting application. The higher carbon nanotube content samples block the incident light more effectively at higher incident energy densities or intensities. The optical limiting mechanism of these composite materials is quite complicated. Besides nonlinear scattering contribution to the optical limiting, there may also be other contributions e.g., nonlinear absorption, nonlinear refraction, electronic absorption and others to the optical limiting. Further improvements in the optical limiting efficiency of the composites and in the dispersion and alignment properties of carbon nanotubes in the polymer matrix could be realized by variation of both nanostructured guest and polymer host, and by ex situ alignment and other methods. It would be very desirable, from the practical application point of view, if one can design broadband optical limiting chromophores that would function in a multimechanistic fashion.     

Selective adsorption of cations on single-walled carbon nanotubes: A density functional theory study

The selective adsorption of cation on single-walled carbon nanotubes (SWNTs) is systemically studied by using density functional theory calculations. It is found that the adsorption energy of cations on SWNTs depends on the concentration of cations and the diameter and the electronic structure of SWNTs. The binding strength of on each SWNT increases monotonically as the concentration of decreases, undergoing a change from endothermic to exothermic reaction. Generally speaking, the binding of on SWNTs becomes weaker as the diameter increases. In the medium-diameter region (9 < d < 11 Å), prefers to interact with metallic SWNTs (m-SWNTs) rather than semiconducting SWNTs (s-SWNTs) at the same concentration of . In the small-diameter region (d < 9 Å), the binding of is nearly independent of metallicity, but it is stronger than that of on the medium-diameter s-SWNTs. In the large-diameter region (d > 11 Å), the dependence of adsorption on the electronic structure is complicated, but the binding of is weaker than that on the medium-diameter s-SWNTs. Our results are in agreement with the experimental report that the small-diameter m- and s-SWNTs and the medium-diameter m-SWNTs are etched away by while the medium-diameter s-SWNTs and the large-diameter m- and s-SWNTs are intact.     

Optical pH response of DNA wrapped HiPco carbon nanotubes

Solubilization of single-walled carbon nanotubes in aqueous solution by surface functionalization is of great interest for biosensor applications and separation of individual nanotubes. Here we have observed that HiPco nanotubes can be stably dispersed into double-stranded DNA aqueous solutions. Interestingly, the first optical interband transitions of the DNA wrapped semiconducting HiPco nanotubes possess a unique pH dependence, a phenomenon observed in SDS-encased and carboxylic group functionalized single-walled carbon nanotubes. The unique optical pH dependence of surface modified semiconducting nanotubes may have promising applications in optical biosensors.     

Single-walled carbon nanotubes as excitonic optical wires

Although metallic nanostructures are useful for nanoscale optics, all of their key optical properties are determined by their geometry. This makes it difficult to adjust these properties independently, and can restrict applications. Here we use the absolute intensity of Rayleigh scattering to show that single-walled carbon nanotubes can form ideal optical wires. The spatial distribution of the radiation scattered by the nanotubes is determined by their shape, but the intensity and spectrum of the scattered radiation are determined by exciton dynamics, quantum-dot-like optical resonances and other intrinsic properties. Moreover, the nanotubes display a uniform peak optical conductivity of approximately 8 e(2)/h, which we derive using an exciton model, suggesting universal behaviour similar to that observed in nanotube conductance. We further demonstrate a radiative coupling between two distant nanotubes, with potential applications in metamaterials and optical antennas.     

Reversible fluorescence quenching in carbon nanotubes for biomolecular sensing

Biosensing applications of single-walled carbon nanotubes have been demonstrated in solid-state device structures. Bioanalyte sensing schemes based on coupling of reversible nanotube fluorescence quenching to redox reactions paired to enzymatic peroxide generation have also been pursued. Here we show a new approach to highly sensitive nanotube-based optical sensing. Single-walled carbon nanotubes interacting with dye-ligand conjugates--a redox-active dye molecule that is covalently bound to a biological receptor ligand (such as biotin in this case)--showed fluorescence quenching. Further interaction between the receptor ligand on the conjugates and target analytes (avidin in this case) induced the recovery of the quenched fluorescence, forming the basis of the sensing scheme. Nanomolar sensitivity was attained with high specificity for the target analyte. This is a versatile approach because a wide range of conjugation possibilities exists between the potential receptors and redox quenchers.     

EGF-functionalized single-walled carbon nanotubes for targeting delivery of etoposide

To enhance the therapeutic potential of etoposide (ETO), we devised a targeted drug delivery system (TDDS) of epidermal growth factor-chitosan-carboxyl single-walled carbon nanotubes-ETO (EGF/CHI/SWNT-COOHs/ETO) using modified SWNTs (m-SWNTs) as the carrier, EGF-functionalized SWNTs (f-SWNTs) as the targeted moiety and ETO as the drug. After SWNT-COOHs were conjugated with CHI (CHI/SWNT-COOHs/ETO), they displayed high solubility and stable dispersion in aqueous solution. The drug loading capacity was approximately 25-27%. The m-SWNTs and f-SWNTs had only slight cytotoxicity. ETO was released from EGF/CHI/SWNT-COOHs/ETO at low pH and taken up by tumour cells via adenosine triphosphate (ATP)-dependent endocytosis. The cell death induced by EGF/CHI/SWNT-COOHs/ETO was as much as 2.7 times that due to ETO alone. In summary, these results demonstrated that our TDDS had a greater anticancer effect than free ETO in vitro.     

Poly(ethylene-co-vinyl alcohol) functionalized single-walled carbon nanotubes and related nanocomposites

Single-walled carbon nanotubes (SWNTs) were functionalized by poly(ethylene-co-vinyl alcohol) (EVOH) copolymer under carbodiimide-activated esterification reaction conditions. Similar to the parent EVOH copolymer, the EVOH-functionalized carbon nanotubes are soluble in highly polar solvent systems such as DMSO and hot ethanol-water mixtures. The soluble EVOH-SWNT sample was characterized by various techniques, including optical absorption, Raman, NMR, electron microscopy, and thermogravimetric analysis. The common solubility of EVOH and EVOH-SWNT allowed their intimate mixing in solution, and thus the fabrication of nanocomposites in which the SWNTs are homogeneously dispersed in the polymer matrix.     

CFRP层合板抗分层损伤技术研究进展

碳纤维/聚合物基复合材料(CFRP)具有高比强度、高比模量、性能可设计、结构尺寸稳定性高、耐疲劳、耐腐蚀等优点而被广泛应用于陆、海、空、天等高性能载具中。各类碳纤维复合材料结构中,层合结构是主要结构形式。传统的CFRP层合结构中各铺层之间缺少纤维增强,故而导致CFRP层压板易产生层间分层且抗冲击损伤能力较低,因此层合板抗分层损伤和破坏方法成为关键问题和研究热点。本文综述了层合板抗分层损伤的方法,并对这些方法的适用性、优缺点进行了比较与阐述;重点归纳了利用碳纳米管提升层合板抗分层损伤的研究进展,并对碳纳米管的性能、增韧机理进行了阐述以及碳纳米管的增韧方法和效果进行了综述与归纳,讨论了"碳纳米管层间Z向增韧"进一步提高复合材料层间性能的可能性。     

Investigation of an optical limiting mechanism in multiwalled carbon nanotubes

We report our investigation of the mechanism that is responsible for the optical limiting behavior in multiwalled carbon nanotubes. We conducted energy-dependent transmission measurements, picosecond time-resolved pump-probe experiment, and nonlinear scattering experiments at 532-nm wavelength on multiwalled carbon nanotube suspension. For comparison, C(60)-toluene solutions and carbon black suspensions were also studied in the same experiments. The similarities that we observed between the multiwalled carbon nanotubes and carbon black suspension suggest that nonlinear scattering, which is known to be responsible for the limiting action in carbon black suspension, should play an important role in the limiting effect in multiwalled carbon nanotubes.     

Optical properties of single-wall carbon nanotube films deposited on Si/SiO2 wafers

The paper describes a set of simple experiments performed to develop an optical model to describe Si/SiO₂ substrates coated with two transparent films of carbon nanotubes. The final goal is to use such optical model to investigate the interaction of proteins with carbon nanotubes. Experiments were performed to assess light reflection as a function of the wavelength or angle of incidence using two substrates (same material, different amounts) composed of oxidized carbon nanotubes. The experimental results indicate that the selected carbon nanotubes layers are anisotropic and significantly different from each other. Experiments performed by spectroscopic ellipsometry (as a function of the wavelength and incident angle) enabled the development of an effective medium approximation model consisting in a two-fraction phase (arc-evaporated carbon and void space). Furthermore, the model enabled calculating the amount of protein adsorbed on the surface of the carbon nanotube film.     

Achieving Ultrahigh Concentrations of Fluorescent Single‐Walled Carbon Nanotubes Using Small‐Molecule Viscosity Modifiers

Surfactant dispersion is a well‐established method for stabilizing individual single‐walled carbon nanotubes in aqueous solutions. However, achieving high concentrations of individually dispersed nanotubes with this technique has proven challenging. Here it is demonstrated that the introduction of viscosity‐enhancing compounds such as sucrose can increase the maximum concentration of surfactant‐dispersed single‐walled carbon nanotubes by more than a factor of 100 while still retaining the optical properties of individual nanotubes. When these solutions are used as inks for methods such as inkjet printing, they retain their fluorescent properties even after the ink has dried.     

Electronic and photonic properties of doped carbon nanotubes

The idea of doping carbon nanotubes is attractive since it provides various possibilities for controlling the physical properties of carbon nanotubes. In this review, we have summarized recent progress on the experimental and theoretical studies of carbon nanotubes doped with nonmetals, alkali metals, transition metals, and clusters. The doping effects on the electronic, magnetic, transport, and optical properties of carbon nanotubes are reviewed. The related applications of carbon nanotubes in nanoelectronics, battery, field emission, spintronics, nonlinear optics, and chemical sensors are discussed.     

Efficiently harvesting excitons from electronic type-controlled semiconducting carbon nanotube films

We have employed thin films of highly purified semiconducting carbon nanotubes as near-infrared optical absorbers in heterojunction photovoltaic and photodetector devices with the electron acceptor C(60). In comparison with previous implementations of more electrically heterogeneous carbon nanotube/C(60) devices, we have realized a 10× gain in zero-bias quantum efficiency (QE) and even more substantial gains in power conversion efficiency (η(p)). The semiconducting nanotube/C(60) heterojunctions are highly rectifying with a peak external QE, internal QE, and η(p) of 12.9 ± 1.3, 91 ± 22, and 0.6%, respectively, in the near-infrared. We show that the device efficiency is determined by the effective length scale for exciton migration in the nanotube films, confirm the high internal QE via photoluminescence quenching, and demonstrate that the driving force for exciton dissociation at the fullerene-fullerene heterointerface is optimized for diameters <1.0 nm. These results will guide the development of next-generation high-performance carbon nanotube-based solar cells and photosensitive devices.     

Fabrication of Schottky barrier carbon nanotube field effect transistors using dielectrophoretic-based manipulation

Nanoscale electronic devices made from carbon nanotubes (CNTs) such as transistors and sensors are much smaller and potentially more versatile than those built using conventional IC technology. In this paper, we present a method that uses dielectrophoretic (DEP) manipulation process for the fabrication of single-channel and multi-channel carbon nanotube field effect transistors (CNT-FETs). For a typical fabrication process, single-walled carbon nanotubes (SWCNTs) are first pre-aligned to micron-precision range between two microelectrodes using DEP technique. The typically applied alternating current (AC) voltage to generate the DEP force for manipulation has a frequency of 1 MHz and amplitude of 10 V. We first demonstrated single-channel or multi-channel structures of CNT-FETs. An AFM is then used to "clean" or "sweep away" unwanted particles or CNTs around the electrodes. Lastly, the fabricated FETs were covered in a polymethylmethacrylate (PMMA) thin film and treated with an annealing process. The PMMA covered devices show improved performances over the non-covered devices.