Ferromagnetic coupling in a novel dicyanamide-bridged dinuclear gadolinium(III) complex [Gd2(dca)4(OH)2 (NITpPy)4] (NITpPy = 4-pyridyl-nitronyl nitroxide radical)

The novel six-coordinated gadolinium(III) complex of formula [Gd₂(dca)₄(OH)₂(NITpPy)₄] (1) (dca = dicyanamide, NITpPy = 4-pyridyl-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazolyl-oxy-3-oxide) has been prepared and characterized by X-ray crystallography. Compound 1 is a dimer structure made up of double μ_1,5-dca-bridged gadolinium(III) ions and one terminal dca ligand; variable-temperature magnetic susceptibility measurements reveal the occurrence of a significant ferromagnetic interaction directly spin polarization through the NITpPy–Gd(III)–NITpPy pathway with J = 11.56 cm⁻¹.     

Synthesis, crystal structure and magnetic properties of a new three-dimensional porous framework: [Gd2(BDA)3(DMF)2(H2O)4] · 2DMF

The open framework compound of [Gd₂(BDA)₃(DMF)₂(H₂O)₄] · 2DMF (1), prepared by heating GdCl₃ with 2,2′-bipyridyl-4,4′-dicarboxylatic acid (BDA) in mixed solvent, is constructed from BDA linking up polymeric [GdO₅(DMF)(H₂O)₂]_n tethers. The 1D channels are filled with coordinated and uncoordinated DMF molecules hydrogen bonding to terminal aqua ligands. The study of the temperature dependent magnetic susceptibilities revealed that there are ferromagnetic interactions between intra-chain Gd^III atoms and weak antiferromagnetic interactions between inter-chain Gd^III atoms.     

A new (3,4,7)-connected topology framework based on [Cd2(CO2)3O4N2] second building unit

A new 3D coordination polymer [Cd₂(L³)(BTC)(H₂O)] (1) (HL³ = 3,5-bis(pyridin-3-ylmethoxy)benzoic acid, H₃BTC = 1,3,5-benzenetricarboxylic acid), has been isolated under hydrothermal condition and characterized by single-crystal X-ray diffraction. Compound 1 is constructed from Cd₂-based second building units (SBUs) [Cd₂(CO₂)₃O₄N₂] and displays a 3D (3,4,7)-connected net with (4²·6)(4³·6³)(4⁵·6¹¹·8⁵) topology. In addition, the photoluminescent spectra indicate compound 1 may be a good candidate for blue-luminescent materials.     

Synthesis and structural characterization of an alternating double aquo-bridged and single cyano-bridged polymeric barium–iron complex: {[Ba2(phen)4(H2O)6Fe(CN)6]·Cl·2(phen)·3H2O}n

A new alternating double aquo-bridged and single cyano-bridged polymeric complex {[Ba₂(phen)₄(H₂O)₆Fe(CN)₆]·Cl·2(phen)·3H₂O}_n (1) (phen = 1,10-phenanthroline) has been synthesized and structurally characterized. In the crystal structure the two centrosymmetric [Ba₂(phen)₄(H₂O)₆] units are bridged through two trans CN groups of [Fe(CN)₆]³⁻ ion, which results in the formation of a zig-zag polymeric chain. In each [Ba₂(phen)₄(H₂O)₆] unit, the two Ba centers are joined by double aquo bridges. Both the Ba atoms are 9-coordinated with distorted mono-capped square antiprismatic geometry. An elaborate hydrogen bonding system holds the parallel polymeric chains together.     

Electrochemical characterization of self-assembly process of nano-scaled polyoxomolybdate (NH4)42[Mo72Mo60O372(CH3COO)30(H2O)72]·ca.300H2O

Cyclic voltammetry and electrochemical admittance were used to characterize the self-assembly process of nano-scaled spheres of polyoxomolybdate (NH₄)₄₂[Mo^VI₇₂Mo^V₆₀O₃₇₂(CH₃COO)₃₀(H₂O)₇₂]·ca.300H₂O·ca.10CH₃COONH₄) or {Mo₁₃₂}. Cyclic voltammetry indicated that the self-assembly process could be detected after 8 h and completed after one day. Electrochemical admittance showed that the molybdenum species in the CH₃COONH₄-CH₃COOH buffer (pH 4.46) were totally different from those in the pure (NH₄)₆Mo₇O₂₄ solution (pH 5.54) and the (NH₄)₆Mo₇O₂₄ solution (pH 4.21) acidified by hydrochloric acid. However, the molybdate species in the latter two solutions should be mixtures of non-protonated and/or protonated [Mo₇O₂₄]⁶⁻ and [Mo₈O₂₆]⁴⁻ anions. Detailed analysis of admittance results could support the existence of the molybdate species related to the {Mo^VI₆} fragment which was one of the components of {Mo₁₃₂} clusters. Admittance results on the self-assembly process were coincident with those from cyclic voltammetry.     

Hexanuclear 4d–4f complexes [Ln2Ag4(ina)8(H2O)10][NO3]2 · 4H2O (Ln = Sm, Eu, Dy): Syntheses, structures and photoluminescent properties

Hexanuclear 4d–4f heterometallic complexes, [Ln₂Ag₄(ina)₈(H₂O)₁₀][NO₃] ₂ · 4H₂O [Ln = Sm (1), Eu (2), Dy (3) and Hina = isonicotinic acid], have been synthesized by the hydrothermal reaction of lanthanide oxides, Ag^I, and isonicotinic acid at a suitable temperature. Single-crystal X-ray diffraction studies indicate that these 4d–4f complexes consist of extended 1D zigzag chains structure built upon [Sm₂Ag₄(ina)₈(H₂O)₁₀] subunits connected by Ag–Ag interactions. Furthermore, the photoluminescent properties of the complex 2 were studied.     

Self-assembled chloro-bridged metallo-prismatic cations of the general formula [M6(η-C5Me5)6(μ3-tpt)2(μ-Cl)6] (M = Rh, Ir; tpt = 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine)

Two cationic pentamethylcyclopentadienyl metal-based hexanuclear complexes with trigonal prismatic architecture have been synthesised through a two-step strategy. The dinuclear complexes [M(η⁵- C₅Me₅)(μ-Cl)Cl]₂ (M = rhodium and iridium) react with 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine (tpt) in dichloromethane to give the trinuclear complexes [Rh₃(η⁵-C₅Me₅)₃(μ₃-tpt)Cl₆] (1) and [Ir₃(η⁵-C₅Me₅)₃(μ₃-tpt)Cl₆] (2), respectively. Addition of silver triflate to 1 and 2 in dichloromethane connects two identical triangular panels to form the hexanuclear metallo-prismatic cations [Rh₆(η⁵-C₅Me₅)₆(μ₃-tpt)₂(μ-Cl)₆]⁶⁺ (3) and [Ir₆(η⁵-C₅Me₅)₆(μ₃-tpt)₂(μ-Cl)₆]⁶⁺ (4), respectively. Cations 3 and 4 have been isolated as their triflate salts and characterised by ¹H NMR, IR and UV/visible spectroscopy.     

Organically templated Np(IV) coordination polymer with in situ formed oxalate anion (ImidazoleH)[Np(C2O4)(CH3SO3)3(H2O)2]

The reaction of Np(V) methanesulfonate solution with imidazole led to the in situ formation of oxalic acid and the reduction of Np(V) to Np(IV). As a result, the novel organically templated organic polymer, (ImidazoleH)[Np(C₂O₄)(CH₃SO₃)₃(H₂O)₂], was formed. The structure consists of infinite chains of [Np(C₂O₄)(CH₃SO₃)₃(H₂O)₂]⁻ and imidazolium cations. The crystal structure is confirmed by IR and UV–vis spectroscopic data. This complex is the first example of structurally characterized 1:1 An(IV) oxalate.     

Samarium Coordinated Polymer: Structural, Vibrational and Thermal Studies of [Sm2(C3H2O4)3(H2O)6]n

The title compound, [Sm₂(C₃H₂O₄)₃(H₂O)₆]_, was investigated by X-ray diffraction. It crystallizes in the monoclinic space group C2/c with cell parameters a = 17.1650(8) ?, b = 12.3010(5) ?, c = 11.1420(4) ?, β = 127.5161(10)°, Z = 4 and V = 1866.04(14) ?³. The Sm atom lies on a two-fold axis and has nine-coordination with six oxygen atoms from carboxylate groups and three water molecules. The compound forms a layer-type polymeric structure. The layers are formed by samarium and one independent malonate group to give a three-dimensional framework. The extensive network of hydrogen bonds and bridge bonds observed in this structure enhances the structural stability. The thermal dehydration of the compound was investigated by thermogravimetric analysis.     

Mechanistic comparison between oxidative and reductive charge transport by [(bpy)2(H2O)RuORu(H2O)(bpy)2] confined in a Nafion membrane as studied by potential-step chronocoulospectrometry

Charge transport (CT) in a Nafion membrane containing μ-oxobis[aquabis(2,2′-bipyridine)ruthenium(III)] complex, [(bpy)₂(H₂O)RuORu(H₂O)(bpy)₂]⁴⁺ (bpy=2,2′-bipyridine, abbreviated to Ru^IIIORu^III) was investigated by potential-step chronocoulospectrometry (PSCCS). Electrochemical reduction of Ru^IIIORu^III in the membrane occurred irreversibly to form [Ru(bpy)₂(OH₂)₂]²⁺ monomer. The CT by reduction of Ru^IIIORu^III in the membrane was suggested to take place by physical displacement of the complex, which is quite different from the mechanism in the CT by oxidation of Ru^IIIORu^III in the same membrane in which charge is transported by charge hopping based on reversible redox reaction between Ru^IIIORu^III and Ru^IIIORu^IV. The fractions of the electrochemically reacted complex in the membrane for the oxidative CT was dependent on the complex concentration, and the yield was low (maximum fraction=0.42 at 0.87 M) relative to the reductive CT. By contrast, the fraction for the reductive CT was independent of the concentration over 0.12 M and close to unity. The different concentration dependence of the fraction was discussed related to the difference in the CT mechanism.     

Synthesis, structure and photoluminescence of a novel palladium(I) compound: [Pd3(μ3-Cl)2(dppp)3][Pd2(μ2-Cl)3(PPh3)2](PPh3)2

Pd(PPh₃)₂Cl₂ reacts with PdCl₂ and 1,3-bis(diphenylphosphine)propane (dppp) in ethanol–DMF–pyridine mixed solvent to yield a novel palladium(I) compound [Pd₃(μ₃-Cl)₂(dppp)₃][Pd₂(μ₂-Cl)₃(PPh₃)₂](PPh₃)₂. It features an isolated structure based on [Pd₃(μ₃-Cl)₂(dppp)₃]⁺ cations having triangulo-palladium clusters and [Pd₂(μ₂-Cl)₃(PPh₃)₂]⁻ anions in which the coordination environment of palladium is an unusual tetrahedral geometry. Its photoluminescence is measured.     

The solubility of selenate-AFt (3CaO·Al2O3·3CaSeO4·37.5H2O) and selenate-AFm (3CaO·Al2O3·CaSeO4·xH2O)

The Se(VI)-analogues of ettringite and monosulfate, selenate-AFt (3CaO·Al₂O₃·3CaSeO₄·37.5H₂O), and selenate-AFm (3CaO·Al₂O₃·CaSeO₄·xH₂O) were synthesised and characterised by bulk chemical analysis and X-ray diffraction. Their solubility products were determined from a series of batch and resuspension experiments conducted at 25 °C. For selenate-AFt suspensions, the pH varied between 11.37 and 11.61, and a solubility product, log K_so=61.29±0.60 (I=0 M), was determined for the reaction 3CaO·Al₂O₃·3CaSeO₄·37.5H₂O+12 H⁺⇔6Ca²⁺+2Al³⁺+3SeO₄²⁻+43.5H₂O. Selenate-AFm synthesis resulted in the uptake of Na, which was leached during equilibration and resuspension. For the pH range of 11.75 to 11.90, a solubility product, log K_so=73.40±0.22 (I=0 M), was determined for the reaction 3CaO·Al₂O₃·CaSeO₄·xH₂O+12 H⁺⇔4Ca²⁺+2Al³⁺+SeO₄²⁻+(x+6)H₂O. Thermodynamic modelling suggested that both selenate-AFt and selenate-AFm are stable in the cementitious matrix; and that in a cement limited in sulfate, selenate concentration may be limited by selenate-AFm to below the millimolar range above pH 12.     

A hemidirected 1-D coordination polymer [Pb2(H2O)2(HBTC)2] · 3H2O extended in holodirected 3-D by weak Pb–O interactions

A new complex, [Pb₂(H₂O)₂(HBTC)₂] · 3H₂O (H₃BTC = 1,3,5-Benzenetricarboxylic acid) (1), has been synthesized under hydrothermal condition. The single-crystal analysis shows that 1 consists of 1-D double-chains with Pb(II) six-coordinated by three H₃BTC and one H₂O molecule with the Pb–O bond distances in the range of 2.56–2.76 Å. When the Pb–O bonding limit extends from 2.76 to 2.90 Å, the potential weak bonds of Pb–O can be found and the coordination number of Pb will increase from six to nine. As a result, the coordination geometry of Pb(II) transforms from hemidirected to holodirected and an infinite 3-D framework is obtained by the connection of the double-chains. The IR spectrum and the TGA–DTA curve of 1 are also reported in this paper.     

The structural characterization and hydroformylation activity of the tri-rhodium complex [Rh3(μ2-dppm)2(μ2-CO)3(K-CO)3]BF4

Rh₂(cod)₂(μ₂-dppm)(μ₂-Cl)]BF₄ (1) rearranges under carbon monoxide to give [Rh₃(μ₂-dppm)₂(μ₂-CO)₃(K¹-CO)₃]BF₄ (2). Complex 2 has been structurally characterized by single crystal X-ray crystallography. The hydroformylation activities of 1 and 2 were compared for substrates styrene and 1-hexene and the activity of 2 found to be unexpectedly high.     

Electrocatalyst materials for fuel cells based on the polyoxometalates—K7 or H7[(P2W17O61)Fe(H2O)] and Na12 or H12[(P2W15O56)2Fe4(H2O)2]

Free acids of the iron substituted heteropoly acids (HPA), H₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (HFe1) and H₁₈[(P₂W₁₅O₅₆)₂Fe^III₂(H₂O)₂] (HFe2) were prepared from the salts K₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] (KFe1) and Na₁₂[(P₂W₁₅O₅₆)₂Fe^III₄(H₂O)₂] (NaFe4), respectively. The iron-substituted HPA were adsorbed on to XC-72 carbon based GDLs to form HPA doped GDEs after water washing with HPA loadings of ca. 1 μmol. The HPA was detected throughout the GDL by EDX. Solution electrochemistry of the free acids are reported for the first time in sulfate buffer, pH 1-3. The hydrogen oxidation reaction was catalyzed by KFe1 at 0.33 V, with an exchange current density of 38 mA/cm². Moderate activity for the oxygen reduction reaction was observed for the iron substituted HPA, which was dramatically improved by selectively removing oxygen atoms from the HPA by cycling the fuel cell cathode under N₂ followed by reoxidation to give a restructured oxide catalyst. The nanostructured oxide achieved an OCV of 0.7 V with a Tafel slope of 115 mV/decade. Cycling the same catalysts in oxygen resulted in an improved catalyst/ionomer/carbon configuration with a slightly higher Tafel slope, 128 mV/decade but a respectable current density of 100 mA/cm² at 0.2 V.     

Ten-vertex osmamonocarbaboranes via arachno and nido {CB9} monocarbaboranes. Polyhedral contraction promoted by [OsCl2(PPh3)3] in MeOH and the crystal and molecular structure of [1-H-1,1-(PPh3)2-2-Ph-3-(OMe)-isocloso-1,2-OsCB8H7]

Reactions of [OsCl₂(PPh₃)₃] 1 with the [NEt₄]⁺ salts of the [6-Ph-nido-6-CB₉H₁₁]⁻ anion 2 and the [arachno-6-CB₉H₁₄]⁻ anion 3 each proceed selectively in methanol solution with the elimination of one boron-containing fragment from the starting cluster polyhedron, yielding together a short series of three novel 10-vertex hydridoosmamonocarbaboranes of isocloso {OsCB₈} cluster geometry.     

Mild oxidation of alcohols with periodic acid catalyzed by [Ru(acac)2(CH3CN)2]PF6 in water

A facile [Ru(acac)₂(CH₃CN)₂]PF₆ (Hacac = acetylacetone) (1) catalyzed oxidation of alcohols to aldehydes or ketones using H₅IO₆ as oxidant in water at room temperature is described.     

Kinetics of Polyurethane Formation in Polymerization Reactions Using the Organometallic Diol (η5-C5H4CH2CH2OH)2Mo2(CO)6

Summary The kinetics of the dibutyltin diacetate (DBTA) – catalyzed polymerization reactions of (η⁵-C₅H₄CH₂CH₂OH)₂Mo₂(CO)₆ with Hypol 2000 (an isocyanate-terminated polyether prepolymer) and with 1,4-butanediol were studied, as were the kinetics of a copolymerization involving (η⁵-C₅H₄CH₂CH₂OH)₂Mo₂(CO)₆ and PEG-1000 (a poly(ethylene glycol)) with Hypol 2000. The purpose was to determine if (η⁵-C₅H₄CH₂CH₂OH)₂Mo₂(CO)₆ appreciably affected the overall rate of the polymerization reaction and if it changed the mechanism of the reaction. The kinetics were analyzed with a fitting program, which allowed extraction of the rate constants for the individual elementary steps in the mechanism. The results showed that (η⁵-C₅H₄CH₂CH₂OH)₂Mo₂(CO)₆ does not significantly alter the timescale of the reaction and that the same reaction mechanism is likely used as with the 1,4-butanediol and PEG-1000. There are some differences in the rate constants of the elementary steps, but these differences can be attributed to the increased steric crowding caused by the bulkier (η⁵-C₅H₄CH₂CH₂OH)₂Mo₂(CO)₆ diol. The effect of the (η⁵-C₅H₄CH₂CH₂OH)₂Mo₂(CO)₆ on the polymers’ physical properties was also investigated. As is the case with other segmented polyurethanes, the hydrogen bonding index (HBI) and the relative amount of soft segments of the (η⁵-C₅H₄CH₂CH₂OH)₂Mo₂(CO)₆-containing polyurethane correlate in a general way with the physical properties of the polymer.     

Ferromagnetic mixed tribridged dinuclear copper(II) complex [Cu2(OAc)2(OH)(dpa)2]PF6 · H2O (dpa = 2,2′-dipyridylamine): 3D superstructure based on hydrogen bond and π…π interaction

A new dinuclear complex [Cu₂(OAc)₂(OH)(dpa)₂] PF₆ · H₂O (1) is prepared and structurally and magneto-structurally characterized. The monocationic core contains one acetate in familiar bidentate η¹:η¹:μ₂-bridge and another in the rare monoatomic bridge along with one hydroxo intermediary. 1 packs through N–H…O and O–H…O hydrogen bonds and π…π interaction resulting a 3D supramolecular continuum and displays high-energy intraligand ¹(π − π^*) fluorescence and intraligand ³(π − π^*) phosphorescence in glassy solution.     

Effects of phase and chemical composition of precursor on structural and morphological properties of (Lu0.95Eu0.05)2O3 nanopowders

Europium-doped lutetium oxide nanopowders have been synthesized by the co-precipitation technique using ammonium hydrogen carbonate as a precipitant. Effects of chemical and phase composition of carbonate precursors on the morphology and sinterability of (Lu_0.95Eu_0.05)₂O₃ nanopowders have been studied. Two types of precursors have been obtained differing by the molar ratio R=NH₄HCO₃/Lu³⁺: a mixture of crystalline Lu_0.95Eu_0.05(OH)(CO₃)·4H₂O and unidentified amorphous phases at R=4–7 and crystalline Lu_0.95Eu_0.05(H₂O)_x(HCO₃)₃·nH₂O precursor at R=8–20. The two-phase precursor consists of spherulite-like aggregates, while the crystalline one is characterized by plate-like morphology. Calcination of Lu_0.95Eu_0.05(H₂O)_x(HCO₃)₃·nH₂O leads to formation of (Lu_0.95Eu_0.05)₂O₃ nanopowders that inherit the precursor morphology, while no morphology succession is observed for (Lu_0.95Eu_0.05)₂O₃ nanopowders obtained by heat treatment of the two-phase precursor. Calcination of the two-phase mixture leads to breakdown of the spherulites and to formation of equiaxed particles with an average diameter of 40 nm with the standard deviation of particle size distribution of about 15%. The obtained low-agglomerated nanopowders were used in vacuum sintering to produce (Lu_0.95Eu_0.05)₂O₃ optical ceramics with in-line transmittance of 41% at 611 nm.