The conformational changes,crystal structure and melting behavior of poly(ethylene/ trimethylene terephthalate) copolyesters

The conformational changes, crystal structure and melting behavior of poly(ethylene/trimethylene terephthalate) (ET) copolyesters were investigated using in situ Fourier transform infrared (FTIR) spectroscopy, wide‐angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) under isothermal crystallization conditions. The results show that the minimum melting temperature was observed in ET53, in which the relative amount of ethylene glycol (EG) to 1,3‐propanediol (PDO) was 52.68/47.32 and the PDO‐dimethyl terephthalate (DMT)‐PDO segments in the molecular chain dominated the crystal formation. The minimum crystallinity of ET copolyesters was found in ET66, in which the relative amount of EG/PDO was 65.91/34.09 and the EG‐DMT‐EG segments in the molecular chain dominated the crystal formation. A rapid and continuous conformational transition in ET copolyesters was observed using in situ FTIR in the first 10 min under isothermal crystallization conditions. The continuously adjusting conformation in the molecules reflects the crystallization of ET copolyesters. Based on the DSC and the X‐ray analyses of the crystallization behavior in the ET copolyesters, crystalline conformation transitions of molecules in ET copolyesters take place rapidly and early. Copyright © 2012 Society of Chemical Industry     

Characterization of novel biodegradable copolyesters prepared from glycolyzed products of poly(ethylene terephthalate)

Poly(ethylene terephthalate), PET reacted with various glycols in the presence of titanium tetraisopropoxide as a catalyst. The glycolyzed PET was fractionated into two parts—soluble and insoluble in CHCl₃—characterized and used as a raw material to synthesize copolyesters. The soluble part in the CHCl₃ part was a mixture of monomers and oligomers, and no melting points were observed. On the other hand, in the insoluble part a melting point was determined. The glycolyzed PET and copoly(succinic anhydride/ethylene oxide), PES were condensed to produce copolymers. The synthesized copolyesters were amorphous and hydrolyzed enzymatically due to a decrease in the crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1838–1847, 2002; DOI 10.1002/app.10462     

Fast crystallization of liquid crystalline copolyesters based on poly(ethylene terephthalate)

Crystallization of a series of liquid crystalline copolyesters prepared from p‐hydroxybenzoic acid (HBA), hydroquinone (HQ), terephthalic acid (TA), and poly(ethylene terephthalate) (PET) was investigated by using differential scanning calorimetry (DSC). It was found that these copolyesters are more crystalline than copolyesters prepared from PET and HBA. Insertion of HQ–TA disrupts longer rigid‐rod sequences formed by HBA and thus enhances molecular motion and increases the crystallization rate. The effects of additives on the crystallization of the copolyesters were also studied. Sodium benzoate (SB) and sodium acetate (SA) increase the crystallization rate of the copolyesters at low temperature, but not at high temperature. It is most likely that liquid crystalline copolyesters do not need nucleating agents, and small aggregates of local‐oriented rodlike segments in nematic phase could act as primary nuclei. Chain scission of the copolyesters caused by the reaction with the nucleating agents was proved by the determination of intrinsic viscosity and by the IR spectra. Diphenylketone (DPK) was shown to effectively promote molecular motion of chains, leading to an increase in the crystallization rate at low temperature, but it decreased the crystallization rate at high temperature. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 497–503, 2001     

Synthesis and characterization of biodegradable aliphatic copolyesters with poly(tetramethylene oxide) soft segments

A series of aliphatic poly(ether–ester)s based on flexible poly(tetramethylene oxide) (PTMO) and hard poly (butylene succinate) (PBS) segments were synthesized by the catalyzed two‐step transesterification reaction of dimethyl succinate, 1,4‐butanediol, and α,ω‐hydroxy‐terminated PTMO (M_n = 1000 g/mol) in the bulk. The content of soft PTMO segments in the polymer chains was varied from 10 to 50 mass %. The effect of the introduction of the soft segments on the structure, thermal, and physical properties, as well as on the biodegradation properties was investigated. The composition and structure of the aliphatic segmented copolyesters were determined by ¹H NMR spectroscopy. The molecular weights of the polyesters were verified by viscometry of dilute solutions and polymer melts. The thermal properties were investigated using DSC. The degree of crystallinity was determined by means of DSC and WAXS. Biodegradation of the synthesized copolyesters, estimated in enzymatic degradation tests on polymer films in phosphate buffer solution with Candida rugosa lipase at 37°C, was compared with hydrolytic degradation in the buffer solution. Viscosity measurements confirmed that there was no change in molecular weight of the copolyesters leading to the conclusion that the degradation mechanism of poly(ester–ether)s based on PTMO segments occurs through the surface erosion. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterisation of copolyesters from poly(ethylene terephthalate) and poly(hexamethylene terephthalate)

Copolyesters containing poly(ethylene terephthalate) and poly(hexamethylene terephthalate) (PHT) were prepared by a melt condensation reaction. The copolymers were characterised by infrared spectroscopy and intrinsic viscosity measurements. The density of the copolyesters decreased with increasing percentage of PHT segments in the backbone. Glass transition temperatures (T_g). melting points (T_m) and crystallisation temperatures (T_c) were determined by differential scanning calorimetry. An increase in the percentage of PHT resulted in decrease in T_g, T_m and T_c. The as-prepared copolyesters were crystalline in nature and no exotherm indicative of cold crystallisation was observed. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in a nitrogen atmosphere. An increase in percentage of PHT resulted in a decrease in initial decomposition temperature. The rate of crystallisation of the copolymers was studied by small angle light scattering. An increase in percentage of PHT resulted in an increase in the rate of crystallisation.     

Synthesis and thermal characterization of random poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) copolyesters

Poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) (PBT/MET) was synthesized by incorporating 1,2‐propandiol(1,2‐PDO) into PBT chains. The molar composition and chemical structure of PBT/MET copolyesters were confirmed by means of FT‐IR and ¹H‐NMR. To investigate the effect of 1,2‐PDO on the thermal properties of PBT/MET copolyesters, the copolymerizations were carried out by varying various contents of MET units, and the prepared materials were evaluated by differential scanning calorimetry and thermogravimetric analysis. Results suggested that with the increase of the content of 1,2‐PDO, the amount of crystallinity and the melting temperature decline, while the glass transition temperature increases and the copolyesters become more transparent and brittle with respect to PBT homopolymer. In addition, the T_g‐composition and T_m‐composition data are well subjected to the Wood equation and Flory's equation, respectively. All these copolyesters are found to consist of the general trend displayed by copolymers reported elsewhere. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of poly(ethylene isophthalate‐co‐ethylene terephthalate) copolyesters

Poly(ethylene isophthalate‐co‐ethylene terephthalate) (PEIPET) copolymers of various compositions and molecular weights were synthesized by melt polycondensation and characterized in terms of chemical structure and thermal and rheological properties. At room temperature, all copolymers were amorphous and thermally stable up to about 400°C. The main effect of copolymerization was a monotonic increase of glass transition temperature (T_g) as the content of ethylene terephthalate units increased. The Fox equation accurately describes the T_g–composition data. The presence of ethylene terephthalate units was found to influence rheological behavior in the melt, with the Newtonian viscosity increasing as the content of ethylene terephthalate units increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 186–193, 2004     

Morphology and melting behaviour of semi-crystalline poly(ethylene terephthalate): 3. Quantification of crystal perfection and crystallinity

The semi-crystalline state of bulk-crystallized poly(ethylene terephthalate) and its relation to the melting behaviour of the polymer have been thoroughly investigated as a function of the thermal history by wide-angle X-ray diffraction. The experimental data, analysed according to the method of Ruland, allow estimation of the absolute degree of crystallinity and the diffuse disorder scattering. The results of this study give a better and more complete insight into the complex thermal behaviour of PET; moreover they corroborate the need for a broad experimental approach in studies related to the melting behaviour of polymers.     

Biodegradability of poly(ethylene terephthalate) copolymers with poly(ethylene glycol)s and poly(tetramethylene glycol)

Poly(ethylene terephthalate) copolymers were prepared by melt polycondensation of dimethyl terephthalate and excess ethylene glycol with 10–40mol% (in feed) of poly(ethylene glycol) (E) and poly(tetramethylene glycol) (B), with molecular weight (MW) of E and B 200–7500 and 1000, respectively. The reduced specific viscosity of copolymers increased with increasing MW and content of polyglycol comonomer. The temperature of melting (T_m), cold crystallization and glass transition (T_g) decreased with the copolymerization. T_m depression of copolymers suggested that the E series copolymers are the block type at higher content of the comonomer. T_g was decreased below room temperature by the copolymerization, which affected the crystallinity and the density of copolymer films. Water absorption increased with increasing content of comonomer, and the increase was much higher for E1000 series films than B1000 series films. The biodegradability was estimated by weight loss of copolymer films in buffer solution with and without a lipase at 37°C. The weight loss was enhanced a little by the presence of a lipase, and increased abruptly at higher comonomer content, which was correlated to the water absorption and the concentration of ester linkages between PET and PEG segments. The weight loss of B series films was much lower than that of E series films. The abrupt increase of the weight loss by alkaline hydrolysis is almost consistent with that by biodegradation.     

Preparation of amorphous poly(ethylene terephthalate) from U‐polymer via a copolymerization process

U‐Polymer, a kind of polyarylate, was synthesized by interfacial polycondensation method with terephthaloyl chloride (TPC), isophthaloyl chloride (IPC), and bisphenol A (BPA) as raw materials. The structure of the U‐Polymer was characterized by IR and ¹H–NMR spectra. Then, an amorphous poly(ethylene terephthalate) (APET) was prepared with the introduction of the U‐Polymer to the PET sequence to improve thermal and mechanical behaviors of PET via the polymerization process. The structure and property of the APET were characterized by DSC and DMA. The results showed that the APET exhibits amorphism, transparency, higher glass‐transition temperature (T_g), and higher storage modulus than that of PET. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1653–1657, 2001     

Novel catalysts based on titanium dioxide/silicon dioxide for poly(ethylene terephthalate)

A series of titanium dioxide/silicon dioxide based poly(ethylene terephthalate) (PET) polycondensation catalysts were synthesized with different Si/Ti molar ratios and various amounts of polyvinylpyrrolidone (PVP). The composition, structure, and catalytic activities of the catalysts and the properties of the PET samples catalyzed by these catalysts were characterized with thermogravimetric analysis, electron probe microanalysis, X‐ray diffraction, X‐ray photoelectron spectroscopy, and so forth. The results indicated that the Si/Ti molar ratios of the catalysts could be well controlled by the synthesis processes used in this study, whereas the content of PVP was influenced by the amount of titanium dioxide. The activities of the catalysts greatly depended on the Si/Ti molar ratios and coordinative effects between titanium and PVP. Some of the catalysts possessed ultrahigh activities, and the corresponding PET material had excellent properties.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Interchange reactions between poly(ethylene terephthalate) and its copolyesters

Poly(ethylene terephthalate) (PET) was blended with two kinds of co[poly-(ethylene terephthalate-p-oxybenzoate)] (POB-PET) copolyester, designated P46 and P64. The PET and POB-PET copolyester were combined in the ratios of 85/15, 70/30, and 50/50. The blends were melt-mixed in a Brabender Plasticorder at 275, 285, and 293°C for different times. The interchange reactions detected by proton nuclear magnetic resonance analysis occur during the processing at a greater level if the blending time increases. The interchange reactions are as a function of temperature, blending times, and composition of blends. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1591–1595, 1998     

Sequence distribution and crystal structure of poly(ethylene/trimethylene terephthalate) copolyesters

The sequence distribution and the crystal structure of copolyesters synthesized from ethylene glycol, 1,3-propanediol, and dimethyl terephthalate with different molar volume ratios were investigated in this study. The triad sequence probabilities of ethylene/trimethylene terephthalate were characterized from the aromatic quaternary carbons by ¹³C NMR. The composition of the copolyesters was determined from the aromatic quaternary carbons by ¹³C NMR, and the methylene protons by ¹H NMR. Results show that 1,3-propanediol reacted faster with terephthalic acid in copolyester polymerization than ethylene glycol. The difference in monomer reactivity is significant in the polymerization. Although the constitutional units revealed a random distribution in the molecular chain by ¹³C NMR, crystallites formed across the full range of ethylene glycol/1,3-propanediol composition by use of differential scanning calorimetry, a hot stage polarizing microscope, and a wide angle X-ray diffraction method. The WAXD deconvolution results show that the major constitutional repeating unit in the molecular chain dominates the crystal structure as a host crystal. The crystal structure was examined by a scanning electron microscope after a solvent etching. Photomicrographs show that the random distribution of the third constitutional unit in the molecular chain of copolyester significantly disturbs the host crystal formation and lamellar orientation.     

Morphology and crystallization of poly(ethylene terephthalate)

The melting behaviour and the morphology of poly(ethylene terephthalate) crystallized from the melt are reported. In general, dual or triple melting endotherms are seen, and single endotherms are seen when the samples are crystallized above 215°C for long times. The location of the uppermost endotherm was found to be constant below T_c = 230°C, and above that temperature the location depends on T_c. Therefore, we have shown that samples of PET which are crystallized above T_c = 230°C contain perfect crystals only; below T_c = 230°C, they contain perfect and imperfect crystals. Scanning electron microscopy showed that the perfect crystals are the dominant lamellae in the spherulitic structure, while the imperfect crystals are the subsidiary lamellae in the spherulitic structure, The amorphous regions are located between individual lamellae.     

Miscibility and melting behavior of poly(ethylene terephthalate)/poly(trimethylene terephthalate) blends

The miscibility and melting behavior of binary crystalline blends of poly(ethylene terephthalate) (PET)/poly(trimethylene terephthalate) (PTT) have been investigated with differential scanning calorimetry and scanning electron microscope. The blends exhibit a single composition‐dependent glass transition temperature (T_g) and the measured T_g fit well with the predicted T_g value by the Fox equation and Gordon‐Taylor equation. In addition to that, a single composition‐dependent cold crystallization temperature (T_cc) value can be observed and it decreases nearly linearly with the low T_g component, PTT, which can also be taken as a valid supportive evidence for miscibility. The SEM graphs showed complete homogeneity in the fractured surfaces of the quenched PET/PTT blends, which provided morphology evidence of a total miscibility of PET/PTT blend in amorphous state at all compositions. The polymer–polymer interaction parameter, χ₁₂, calculated from equilibrium melting temperature depression of the PET component was ?0.1634, revealing miscibility of PET/PTT blends in the melting state. The melting crystallization temperature (T_mc) of the blends decreased with an increase of the minor component and the 50/50 sample showed the lowest T_mc value, which is also related to its miscible nature in the melting state. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Solid state polymerization (SSP) of low molecular weight poly(ethylene terephthalate) (PET) copolyesters compared to conventional SSP of PET

SSP, starting from very low molecular weight (MW) poly(ethylene terephthalate) (PET) precursors, is claimed to offer significant production cost advantages over conventional PET production. However, as the intrinsic viscosity (IV) of the PET precursor is reduced, there is a significant change in the crystallization behavior of PET and morphology that affects reactivity in SSP. Using small particle size PET to significantly reduce the effects of diffusion so that SSP is under chemical reaction control and using a kinetic model that describes an overall SSP rate, the effect of ethylene isophthalate substitution on the SSP rate from low MW PET precursor was determined. As the ethylene isophthalate comonomer content increases, the rate of SSP for low MW PET increases. The activation energy for SSP of low MW PET decreases with an increase in the ethylene isophthalate content. For the low MW PET copolyesters in this study, the SSP activation energy is comparable to conventional process when the comonomer content of the low MW polyester is around 7 mol % and the conventional precursor is around 3 mol %. However, even though the activation energy is reduced through the use of higher comonomer content, the overall rate of SSP for the low MW copolyesters studied is significantly slower than conventional SSP. This reduction in rate is explained by differences in crystallinity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 230–238, 2002     

Segmented liquid crystalline copolyesters and blending with poly(ethylene terephthalate)

Summary A series of segmented copolyesters with semi-regular structure was synthesized. In these copolymers, fully aromatic triad hard segments-HB-T-HB-, acting as mesogenic units, are linked each other by poly(ethylene terephthalate) (PET) segments with different average chain lengths as flexible spacers. The liquid crystallinity of the copolymers, i.e. the meso-phase forming ability, was studied against length of the spacer. In subsequent blending of these copolymers with PET matrix, results were compared with those from a commercial TLCP of PHB/PET random copolyester. Better mechanical properties were gained as expected since the compatibility of the segmented liquid crystalline copolyesters with the matrix is believed to be improved.     

Preparation and biodegradation of copolyesters based on poly(ethylene terephthalate) and poly(ethylene glycol)/oligo(lactic acid) by transesterification

The poly(ethylene terephthalate‐co‐ethyleneoxide‐co‐DL ‐lactide) copolymers were successfully prepared by the melt reaction between poly(ethylene terephthalate), poly(ethylene glycol), and DL ‐oligo(lactic acid) without any catalysts. The transesterification between ethylene terephthalate, ethyleneoxide, and lactide segments during the reaction was confirmed by the ¹H NMR analysis. The effect of reaction temperatures and the starting feed ratios on the molecular microstructures, molecular weights, solubility, thermal properties, and degradability of the copolyesters was extensively studied. The values of crystallization temperature, melting temperature, crystallization, and melting enthalpy of the copolyesters were found to be influenced by the reaction temperatures, starting feed ratios, etc. The copolyesters showed good tensile properties and were found to degrade in the soil burial experiments during the period of 3 months. The morphology of the copolyester films were also investigated by scanning electron microscopy during soil burial degradation. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Multiple melting behaviour of poly(ethylene terephthalate)

Differential scanning calorimetry (DSC) and temperature modulated DSC (MTDSC) have been used to investigate the melting behaviour of poly(ethylene terephthalate) (PET). Multiple melting endotherms were observed even at high heating rates, e.g. 160 K min⁻¹ and these have been attributed to the presence of two different distributions of lamella thickness and re-crystallisation (reorganisation) on heating. This has been confirmed by MTDSC—the presence of endotherms and an exotherm in the reversing component of the heat flow during heating. Examination of the endotherms of samples heating stepwise indicated that further crystallisation took place above the isothermal crystallisation temperature (T_c). Some part of this was associated with lamella thickening and crystal perfecting. The multiple melting endotherms observed are a consequence of the balance between the melting and re-crystallisation and the lamella thickness distribution existing within the sample, prior to heating. The triple melting endotherms observed are attributed to the melting of secondary and primary lamellae produced on crystallisation and to thickened lamellae produced during heating to the melting point.     

Film reaction kinetics for melt postpolycondensation of poly(ethylene terephthalate)

Melt polycondensation has recently been reported to prepare high-viscosity poly(ethylene terephthalate) (PET), the reaction efficiency is greatly improved in over 10-folds compared with conventional solid state polycondensation (SSP). Melt postpolycondensation of common PET chips was conducted in specified film thickness to obtain industrial PET. Based on the investigation of reaction conditions, film reaction kinetics were determined in the principle of end groups analysis. It was positively regulated that the intrinsic viscosity of PET could be achieved in condition of high vacuum, thin melt film and proper temperature, degradation reaction would be increased at exorbitant temperature. An apparent reaction kinetic model was proposed and was verified by experiments. Results indicated the activation energy of melt postpolycondensation of PET was 88.22 kJ/mol and the reaction rate constant was significant higher than that of solid state polycondensation.