三嵌段共聚物PS-b-PI-b-PVBC的RAFT合成与表征

采用可逆加成-断裂链转移自由基聚合法,以S-正十二烷基-S'-(α,α'-二甲基-α″-乙酸基)三硫代碳酸酯为链转移剂,偶氮二异丁腈为引发剂,合成窄分子量分布的聚苯乙烯大分子链转移剂(PS-CTA),在PS-CTA存在下,由引发剂依次引发异戊二烯(Ip)和对氯甲基苯乙烯(VBC)聚合,得到三嵌段聚合物PS-b-PI-b-PVBC。运用凝胶色谱、IR、原子力显微镜、1H NMR等技术对产物的结构进行表征。结果表明,所得嵌段共聚物分子量分布较窄(PDI=1.93),聚合过程具有活性/可控特征,聚合物薄膜在热退火后形成微观相分离,平均相区尺寸约为100 nm。     

PGMA-b-PS二嵌段共聚物的RAFT/细乳液合成及表征

以2-(十二烷基三硫代碳酸酯)-2-甲基丙烯酸为链转移剂,利用RAFT/细乳液联合技术合成了相对分子质量分布较窄(PDI=1.53)的大分子链转移剂聚甲基丙烯酸缩水甘油酯。再以该大分子为可逆加成-断裂链转移(RAFT)试剂,通过连续加料的方式加入苯乙烯后进一步引发聚合,得到PGMA-b-PS二嵌段共聚物。采用GPC、FT-IR、1H-NMR、DSC等方法对聚合产物进行了表征。结果表明:合成的聚合物为线型二嵌段共聚物,相对分子质量分布为1.87,该聚合过程具有活性/可控特征。DSC测得二嵌段共聚物具有2个玻璃化转变温度(Tg),分别为77.33℃和98.30℃。此外,还考察了单体加料顺序对聚合过程的影响。     

反应挤出合成SIS三嵌段共聚物的研究

研究了以同向紧密啮合双螺杆挤出机为反应器,采用单体顺序加料方式,本体法合成SIS三嵌段共聚物。^1H—NMR谱图表明该共聚物的结构为嵌段结构。异戊二烯的质量分数影响其力学性能。     

苯乙烯与甲基丙烯酸含氟酯（FNEMA）嵌段共聚物的合成与表征

用原子转移自由基聚合方法合成了苯乙烯与甲基丙烯酸－２－（全氟壬烯氧基）乙酯的嵌段共聚物。结果表明，共聚物分子量的实验值与计算值接近，且具有低分散性。用红外光谱和核磁共振表征了此共聚物的结构。     

RAFT聚合制备嵌段共聚物的研究进展

RAFT聚合具有反应条件温和,对单体纯度和环境的要求相对较低等优势,近年来通过RAFT方法制备嵌段共聚物已经受到了高分子化学领域研究者的广泛关注。简要介绍了近10年来通过RAFT方法制备嵌段共聚物所常用的RAFT试剂和单体的研究进展,主要介绍了近10年来线型两嵌段、三嵌段共聚物和星型嵌段共聚物的RAFT聚合及应用。     

苯乙烯—异戊二烯—苯乙烯热塑性嵌段共聚物

简介近年来国外SIS生产状况、生产工艺技术经济评估、SIS的基本性能和应用以及国外技术发展趋势,井对国内SIS产品开发作出预估。     

甲基丙烯酸甲酯-苯乙烯嵌段聚合物的RAFT聚合制备

以二硫代苯甲酸异丁腈酯为RAFT试剂,偶氛二异丁腈为引发剂,制备不同嵌段长度的甲基丙烯酸甲酯-苯乙烯嵌段聚合物.嵌段聚合物数均分子量的实验值与理论值接近,但由于RAFT聚合过程中,聚甲基丙烯酸甲酯死聚物的生成,使嵌段聚合物的分子量分布指数较宽.     

P2VP-b-PS-b-PI三嵌段共聚物的RAFT合成及表征

以S-十二烷基-S’-(α,α’-二甲基-α’’-乙酸)-三硫代碳酸酯(DDMAT)为链转移剂,通过可逆加成-断裂链转移自由基聚合(RAFT)方法制备了窄分布的聚2-乙烯基吡啶。再以该聚合物为大分子链转移剂,引发苯乙烯的RAFT聚合,得到聚2-乙烯基吡啶-b-聚苯乙烯(P2VP-b-PS)的两嵌段共聚物。以P2VP-b-PS为RAFT试剂,合成聚2-乙烯基吡啶-b-聚苯乙烯-b-聚异戊二烯(P2VP-b-PS-b-PI)的三嵌段共聚物。运用1H NMR、IR和凝胶渗透色谱(GPC)等技术对产物的结构和分子量及分子量分布进行表征,采用原子力显微镜(AFM)观察三嵌段共聚物薄膜的微相分离结构。结果表明,所得三嵌段共聚物P2VP72-b-PS136-b-PI300分子量分布较窄(PDI=1.69),合成过程具有活性/可控聚合特征,聚合物薄膜经溶剂退火处理后出现了明显的微观相分离结构。     

苯乙苯／α—蒎烯嵌段共聚物的合成

考察了一种用大分子引发剂制备七乙烯／α－蒎烯嵌段共取物（ＰＳｔ－ｂ－Ｐα－Ｐ０的方法，其中大分子引发剂为末端含α－Ｃｌ的聚苯乙烯，由生阳郭子聚合剂制备。首选考察了α－氯代乙苯／ＳｎＣｌ４体系的α－蒎烯聚合，进而了不同条件下的ＰＳｔ－α－Ｃｌ／ＳｎＣｌ４Ｌｅ３ｗｉｓ碱）体系的α－蒎烯聚合。产物经ＧＰＣ、ＩＲ、ＨＮＭＲ等分析确定。方法可以在不同相对分子质量的聚苯乙烯嵌段上接枝聚α－蒎烯嵌段。     

PEO-b-PS两亲性嵌段共聚物的合成与表征

以PEO-Br为大分子引发剂,CuBr/2-2’-联吡啶为催化体系,采用原子转移自由基聚合(ATRP)方法制得了一系列分子量可控且分子量分布窄的两亲性嵌段共聚物,通过1H-NMR、GPC、DSC等测试手段对其进行了表征,研究结果表明嵌段共聚物随着聚氧乙烯含量的降低,结晶度(Xc)、结晶熔融温度(Tm)、结晶温度(Tc)降低;当共聚物中聚氧乙烯的含量降为45%时,嵌段共聚物已无结晶现象。     

Photo-responsive block copolymer containing azobenzene group: Synthesis by reversible addition-fragmentation chain transfer polymerization and characterization

The design and synthesis of a new azobenzene-based methacrylate monomer (Azo-IEM) was demonstrated, and its polymerization behavior during reversible addition-fragmentation chain transfer (RAFT) polymerization was investigated. Well-defined homopolymer and amphiphilic block copolymer containing Azo-IEM monomeric units were successfully prepared as evidenced by NMR and GPC analysis. Moreover, the photo-triggered reversible isomerization of polymer products in selected solvents was investigated. Finally, TEM analysis showed that there were significant differences in the nanoparticle morphologies when the block copolymer samples were irradiated with different wavelengths of light (i.e., UV and visible). The size and shapes of the p(HEMA-b-Azo-IEM) polymer capable of transitions upon changes in Vis/UV light exposure which prepared from MeOH/CHCl₃ mixture solvent. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47870.     

苯乙烯可逆加成-断裂链转移聚合动力学

为了实现可逆加成-断裂链转移(RAFT)聚合过程中,苯乙烯均聚、高分子量聚苯乙烯的合成及苯乙烯与其他单体共聚时,对苯乙烯转化率、共聚时组成和分子量大小的控制,进行了二硫代苯乙酸-1-苯基乙酯(PEPDTA)调控苯乙烯本体和细乳液聚合动力学分析。在本体聚合中,反应速率慢,链增长自由基与"中间态"自由基的终止反应对聚合速率影响较小,很难合成窄分布、高转化率、高分子量的聚苯乙烯;在细乳液聚合中,反应速率快、转化率高,随着PEPDTA含量增加,乳胶粒数量减少、粒径分布变宽,诱导期和缓聚现象明显;聚合物的数均分子量随转化率线性增长,RAFT试剂浓度越高,分子量分布越窄,反应时间越长,分布越宽。以Smith-Ewart方程为基础,建立了苯乙烯RAFT细乳液聚合动力学模型,模型动力学曲线与实验数据相符合,能较好地预测实验过程。     

Synthesis of comb-shaped copolymers by combination of reversible addition-fragmentation chain transfer polymerization and cationic ring-opening polymerization

Comb-shaped graft copolymers with poly(methyl acrylate) as a handle were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and ring-opening polymerization (ROP) techniques in three steps. First, copolymers of poly(styrene-co-chloromethyl styrene), poly(St-co-CMS), were prepared by RAFT copolymerization of St and CMS using 1-(ethoxycarbonyl)prop-1-yl dithiobenzoate (EPDTB) as RAFT agent. Second, the polymerization of MA using poly(St-co-CMS)-SC(S)Ph as macromolecular chain transfer agent produced block copolymer poly(St-co-CMS)-b-PMA. Third, cationic ring-opening polymerization of THF was performed using poly(St-co-CMS)-b-PMA/AgClO₄ as initiating system to produce comb-shaped copolymers. The structures of the poly(St-co-CMS), poly(St-co-CMS)-b-PMA and final comb-shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography (GPC).     

Preparation of molecularly imprinted polymer microspheres via reversible addition-fragmentation chain transfer precipitation polymerization

The first combined use of reversible addition-fragmentation chain transfer (RAFT) polymerization and precipitation polymerization in the molecular imprinting field is described. The new polymerization technique, namely RAFT precipitation polymerization (RAFTPP), provides MIP microspheres with obvious molecular imprinting effects towards the template, fast template binding process and an appreciable selectivity over structurally related compounds, while only irregular MIP aggregates were obtained via traditional radical precipitation polymerization (TRPP) under similar reaction conditions. The MIP microspheres prepared via RAFTPP have proven to show improved binding capacity, larger binding constant and apparent maximum number for high-affinity sites, and significantly higher high-affinity binding site density in comparison with the MIP prepared via TRPP.     

Characterization of pH-dependent micellization of polystyrene-based cationic block copolymers prepared by reversible addition-fragmentation chain transfer (RAFT) radical polymerization

A series of block copolymers composed of a fixed length of an (ar-vinylbenzyl)trimethylammonium chloride (Q) block (the number average degree of polymerization of the Q block, DP_n,Q=57) and varying lengths of an N,N-dimethylvinylbenzylamine (A) block (the number average degrees of polymerization of the A blocks, DP_n,A, ranging 11-50) were prepared by reversible addition-fragmentation chain transfer (RAFT) radical polymerization, and their pH-dependent micellization was characterized by potentiometric titration, ¹H NMR spectroscopy, dynamic and static light scattering, and fluorescence techniques as a function of the A block length. At pH<5.5, the A block is fully protonated, and hence the block copolymers act as a simple polyelectrolyte, dissolving molecularly in acidic water. At pH>7, the A block becomes deprotonated, and thereby the block copolymers aggregate into a micelle composed of hydrophobic microdomains formed from the deprotonated A blocks. Results of light scattering and fluorescence measurements indicated that the micellization behavior depended strongly on the length of the A block. The number of polymer chains comprising one micelle (i.e. mean aggregation number, N_agg) increased from 3 to 12 as DP_n,A increased from 11 to 50 at pH 10.0. In the case of a random copolymer of Q and A with an A/Q molar ratio similar to that of a block copolymer with DP_n,A=50, N_agg∼1 (i.e. unimolecular micelle) was confirmed by static light scattering at pH 10.0.     

Preparation and characterization of poly(styrene)/metal composites via reversible addition-fragmentation chain transfer (RAFT) polymerization

The expectant dithiocarbamate group end-functional poly(styrene) (PS) with a controlled molecular weight and low molecular weight distribution was synthesized conveniently via reversible addition-fragmentation chain transfer (RAFT) polymerization and was used to prepare polymer/metal composites with coordination chemistry. By the self-assembly technique, PS coordinated with the rare earth metal in N,N-dimethylformamide (DMF) to generate the fluorescent Eu–PS and Sm–PS complexes. Furthermore, PS-coated spherical silver nanoparticles (AgNPs) were prepared by reducing Ag⁺ to Ag⁰ under ultrasound irradiation in the presence of DMF and H₂O. The well core/shell structure of the AgNPs was characterized by transmission electron microscopy (TEM).     

基于点击化学和可逆加成-断裂链转移自由基聚合合成极性链接枝聚丁二烯

以1-硫代甘油作为改性剂、聚丁二烯为主链,通过热引发和光引发合成了侧基含有羟基的聚丁二烯,以S-1-十二烷基-S′（α-α′-二甲基-α′′乙酸）-三硫代碳酸酯作为可逆加成-断裂链转移自由基聚合试剂、偶氮二异丁腈为引发剂,合成了端羧基聚N,N-二甲基丙烯酰胺,然后将两种官能化的聚合物进行酯化反应制得聚N,N-二甲基丙烯酰胺接枝聚丁二烯。结果表明,采用光引发可以显著提高点击化学的反应效率。用核磁共振氢谱证实了产物含羟基聚丁二烯和端羧基聚N,N-二甲基丙烯酰胺以及接枝聚合物的结构,并显示通过这种方法所制备接枝聚合物的接枝链数目和长度均可控。     

Synthesis of polystyrene end-capped with pyrene via reversible addition-fragmentation chain transfer polymerization

A novel benzodithioate compound with a pyrene structure in the R group, pyrenylmethyl benzodithioate (PMB) was synthesized. Using PMB as the chain transfer agent (CTA), the RAFT polymerizations of styrene with AIBN as an initiator were carried out in different reaction conditions. The results indicated that PMB was an effective CTA for the RAFT polymerizations of styrene with the “living”/controlled characteristics. The structures of the obtained polymers were characterized by ¹H NMR. The results showed that majority of the polymer chains contained the pyrene moiety in the chain end. The enhanced fluorescence property in CHCl₃ solution was observed. The chain-extension experiments of the obtained polystyrene (PS) with the monomers of styrene and methyl acrylate were successfully carried out.     

Kinetics study of living microemulsion polymerization mediated by reversible addition-fragmentation chain transfer

The present work focuses on the development of functional polyurethane hybrids through the incorporation of surface modified TiO₂ nanoparticles. For improving the nano-particle dispersion and increasing possible interactions between nano-particles and polyurethane matrix, the surface of the nano-particles was modified with 1,3,5-triazine core silane coupling agent. The surface modification of nanoparticles was confirmed by FESEM, FT-IR and Raman spectroscopic techniques. The functionalized nanoparticles were then inscribed in 0, 1 and 2 weight percentages into polyurethane matrix. The as prepared composite coatings were investigated for various anti-microbial, thermo-mechanical and anticorrosive properties. The tensile strength of polyurethane was improved by 300 % upon addition of 2 wt% of modified TiO₂ nanoparticles as compared to neat polyurethane. Fog test and electrochemical polarization studies suggest that the corrosion resistance increases with increase of the modified TiO₂ content in the coating formulation. The composite coatings also have good resistance towards various bacterial and fungal stains as compared to the pure polyurethanes. The coatings substantially gain hydrophilic nature symbiotically with TiO₂ content suggesting its potential application as self-cleanable material.