螺型位错偶极子与圆形夹杂界面裂纹的弹性干涉

该文研究了螺型位错偶极子和圆形夹杂界面裂纹的弹性干涉作用。利用复变函数方法,得到了该问题的复势函数以及应力场的封闭形式解答。求出了裂纹尖端的应力强度因子以及作用在螺型位错偶极子中心的像力和像力偶矩,并分析了位错偶极子对应力强度因子的影响及界面裂纹几何条件和不同材料特征组合对位错偶极子平衡位置的影响规律。研究结果表明:位错偶极子对应力强度因子具有很强的屏蔽或反屏蔽效应;硬夹杂排斥位错偶极子,而裂纹吸引位错偶极子,在一定条件下,位错偶极子在裂纹附近出现一个平衡位置;当裂纹的长度和材料剪切模量比达到临界值时,可以改变偶极子和界面之间的干涉机理。同时,裂纹长度对位错偶极子中心像力偶矩也有很大的影响。     

螺型位错偶极子与界面刚性线的弹性干涉

研究了晶体材料中螺型位错偶极子和界面刚性线夹杂的弹性干涉作用。利用复变函数方法,得到了该问题的复势函数以及应力场的封闭形式解答。求出了作用在螺型位错偶极子中心的像力和力偶矩,并分析了界面刚性线几何条件和不同材料特征组合对位错偶极子平衡位置的影响规律。研究结果表明:当位错偶极子不断靠近刚性线时,刚性线对螺型位错偶极子的运动有很强的排斥作用。当刚性线的长度和材料剪切模量比达到临界值时,可以改变偶极子和界面之间的干涉机理。同时,偶极子偶臂的方向对其自身的平衡也有很大的影响。     

压电螺型位错与椭圆夹杂界面导电刚性线的干涉效应

研究了无限大压电基体材料中压电螺型位错与含界面导电刚性线椭圆夹杂的电弹耦合干涉问题。运用求解复杂多连通域问题的复变函数方法,获得了椭圆夹杂和基体区域复势函数以及电弹性场的精确级数形式解答。利用广义Peach-Koehler公式导出作用于压电螺型位错上的位错力公式。主要讨论了刚性线几何尺寸和椭圆曲率对位错力的影响规律。分析结果表明:界面刚性线排斥基体中的位错,对靠近椭圆夹杂界面的螺型位错的运动和平衡位置有重要的影响。当刚性线的长度达到临界值,界面刚性线的存在会改变螺型位错与压电椭圆夹杂的干涉规律。椭圆夹杂的压缩系数变大,刚性线尺寸对位错力的影响也越大。     

压电材料中螺型位错与含界面刚性线圆形涂层夹杂的干涉

研究了压电材料中位于基体的螺型位错与含界面刚性线圆形涂层夹杂的电弹耦合干涉问题。运用复变函数方法,获得了基体、涂层和夹杂中复势函数的精确级数形式解答。基于广义Peach-Koehler公式,计算了作用在位错上的像力。讨论了刚性线几何条件、界面层厚度和材料电弹特性对位错力和位错平衡位置的影响规律。结果表明:对于软夹杂和软涂层的情况,刚性线长度存在一个临界值改变像力的方向。螺型位错先被吸引后被排斥,在夹杂附近有一个稳定的平衡点。对于硬夹杂和硬涂层的情况,位错一直被排斥,刚性线对位错力的影响较小。     

磁电弹双材料条中螺位错与界面边裂纹的相互作用

研究半无限长磁电弹双材料条中螺位错与界面边裂纹的相互作用。基于镜像原理和保角变换方法,得到了弹性场、电场和磁场的解析解,给出了应力、电位移、磁感应强度、应力强度因子以及像力的显函表达式。以压电-压磁双材料条形介质为例,分析了应力场、电位移和磁感应强度的分布特性,讨论了几何参数、压电和压磁效应对应力强度因子和像力的影响。     

电磁材料中广义螺型位错与圆形界面刚性线夹杂的干涉效应

研究了广义螺型位错和圆形界面刚性导体线夹杂的磁电弹耦合干涉效应。采用Riemann-Schwarz对称原理并结合复势函数奇性主部分析,得到该问题的一般解答。当界面只含一条刚性线时,获得了封闭形式解。运用扰动技术,求解了位错点的扰动应力、电位移和磁感应强度场。由推广的Peach-Koehler公式求出了作用在位错上的位错力,讨论了圆弧形刚性线几何条件和材料失配对位错力的影响规律。解答不但可作为格林函数获得任意分布位错的相应解答,而且可以用于研究无穷远纵向剪切和面内电磁场作用下界面刚性线夹杂和任意形状裂纹的磁电弹耦合干涉效应问题。     

压电螺型位错与含界面裂纹椭圆夹杂的干涉效应

运用求解复杂多连通域问题的复变函数方法，获得了压电螺型位错与含界面裂纹椭圆夹杂的干涉问题，复势函数的精确级数形式解。利用广义Peach-Koehler公式导出作用于螺型位错的位错力公式。分析结果表明，当裂纹的曲率或长度达到临界值，界面裂纹的存在会改变压电螺型位错与椭圆夹杂的干涉性质。     

复合材料中压电螺型位错与含刚性核夹杂的电弹干涉

为了研究压电复合材料中位于基体的压电螺型位错与含共焦椭圆导电刚性核椭圆夹杂的电弹相互作用, 基于复变函数方法, 获得了基体和夹杂区域的精确级数形式解析解。运用广义Peach-Koehler公式, 导出了作用在位错上像力的解析表达式。在此基础上讨论了椭圆刚性核和材料电弹特性对位错像力以及位错平衡位置的影响规律, 同时讨论了压电夹杂和弹性基体的复合情况。结果表明: 椭圆刚性核对位错有着明显的排斥作用, 可以增强硬夹杂对位错的排斥, 减弱软夹杂对位错的吸引; 对于软夹杂, 在界面附近位错存在一个不稳定的平衡位置; 在基体和夹杂的界面上, 像力迅速增大; 当夹杂的剪切模量远小于基体时, 界面附近不会出现位错的平衡位置。     

位错与含裂纹非理想界面圆形夹杂的干涉效应

研究了基体中任意位置的螺型位错与含裂纹非理想界面圆形弹性夹杂的干涉力学问题。运用复变函数的解析延拓技术与奇性主部分析方法,获得了该问题复势函数的一般解答。作为典型例子,求出了非理想圆形界面含一条裂纹时基体和夹杂区域复势函数的封闭形式解。计算了作用在螺型位错上的位错力。讨论了含裂纹的非理想界面以及材料失配对位错力的影响规律。结果表明:与含裂纹理想界面相比,非理想界面对位错力的影响更大,对位错的捕获能力更强。硬夹杂时,可能存在非稳定平衡点,使得非理想界面、界面裂纹和夹杂对位错的作用力为零;软夹杂时,非理想界面、界面裂纹和夹杂则始终吸引位错。     

无限长条板中弹性与粘弹性界面裂纹尖端场

研究无限长条板中粘弹性-弹性界面Griffith裂纹在 Ⅰ 型突加载荷作用下,裂纹尖端动态应力强度因子的时间响应。利用积分变换方法、Fourier和Laplace变换,分别推导出了弹性和粘弹性问题的控制方程组;引入位错密度函数,并结合边界条件,导出了反映裂纹尖端奇异性的Cauchy型奇异积分方程组,运用Chebyshev正交多项式化奇异积分方程组为代数方程组,用配点法进行求解;最后用Laplace积分变换数值反演方法,将拉氏域内的解反演到时间域内,求得动态应力强度因子的时间响应,并对材料参数的影响进行了分析。结果表明,剪切松弛参量对 Ⅰ 型动应力强度因子的影响小于对 Ⅱ 型的影响,而膨胀松弛参量对 Ⅰ 型动应力强度因子的影响大于对 Ⅱ 型的影响。      

The Interaction between a Piezoelectric Screw Dislocation Dipole and an Elliptic Blunt Crack in Elliptical Inhomogeneity

The interaction problem of a piezoelectric screw dislocation dipole with a confocal elliptic blunt crack in elliptical inhomogeneity subjected to remote anti-plane stress field and in-plane electric field is investigated by using the complex method of elasticity. The exact closed-form solutions of a series of quantities, such as singularity stress field, image force and image torque acting on the center of screw dislocation dipole, stress intensity factor and electric displacement intensity factor of crack tip, energy release rate, and generalized strain energy density are obtained. Then the influence laws of remote load, the dip angle of dislocation dipole, the size of blunt crack, and the material constants on the quantities are analyzed. The numerical results show that the image force, image torque, stress intensity factor, and electric displacement intensity factor make periodic variation as the dip angle of dislocation dipole; the energy release rate of crack tip is negative when subjected to pure electric field, however, it can be positive or negative when subjected to the combined action of mechanical field and electric field; the sharp crack is not easy to expand in some combined action of mechanical field and electric field.     

Screw dislocations interacting with a partially debonded interface in cylindrically anisotropic composites

Interaction between screw dislocations and a partially debonded interface in cylindrically anisotropic composites subjected to uniform stress at infinity is investigated in this paper. Using Muskhelishvili’s complex variable method, the closed forms of complex potentials are obtained for a screw dislocation and a screw dislocation dipole located inside either matrix or inhomogeneity. Explicit expressions of stress intensity factors at the crack tips, image forces and image torques acting on dislocation or the center of dipole are provided. The results show that the crack and dislocation geometry combination plays an important role in the interaction between screw dislocations and interface crack. Furthermore, it is found that the anisotropy of solids may change the shielding and anti-shielding effects arising from screw dislocations and the equilibrium position of screw dislocations. The presented solutions are valid for anisotropic, orthotropic or isotropic composites and can be reduced to some novel or previously known results.     

On the interaction between a generalized screw dislocation and circular-arc interfacial rigid lines in magnetoelectroelastic solids

The interaction of a generalized screw dislocation, which is located inside either the inclusion or the matrix, with circular-arc interfacial rigid lines under remote antiplane shear stresses, in-plane electric and magnetic loads in linear magnetoelectroelastic materials is dealt with. By using the complex variable method, the general solutions of the physical problem are presented in this paper. The closed-form solutions for stresses, electric displacement fields and magnetic induction fields are derived explicitly for the interface with a finite rigid line. The image forces acting on the generalized screw dislocation are then calculated by using the generalized Peach–Koehler formula. The influence of the length and the location of the rigid line as well as the material mismatch on the image force is evaluated. Numerical computations and discussions show that, when the length or the position of the interfacial rigid line achieves a critical value, the image force on the dislocation changes its direction due to the existence of the rigid line. In addition, the soft inclusion can repel the dislocation in magnetoelectroelastic materials owing to their intrinsic magnetoelectromechanical coupling behavior.     

Screw Dislocation Interacting with an Interfacial Edge Crack between Two Bonded Dissimilar Piezoelectric Wedges

This letter is concerned with an interfacial edge crack in a piezoelectric bimaterial wedge interacting with a screw dislocation under antiplane mechanical and in-plane electric loading. In addition to a discontinuous electric potential across the slip plane, the dislocation is subjected to a line-force and a line-charge at the tip. The out-of-plane displacement and electric potentials are obtained in closed-form based on conformal mapping technique and the solution for the screw dislocation in an infinite piezoelectric bimaterial with a semi-infinite interfacial crack. The intensity factors (IFs) and energy release rate (EER) are obtained explicitly. These solutions can be used as a base for constructing solutions for arbitrary coupled antiplane mechanical and in-plane electrical loadings.     

On the interaction between a screw dislocation and a circular coated inclusion with interfacial cracks

Summary The problem of the elastic interaction between a screw dislocation, which is located at an arbitrary point inside either the matrix or the inclusion, and a circular coated inclusion with interfacial cracks is dealt with. An efficient and concise method for a complex multiply connected region is developed, in terms of which the general solutions to the problem are derived. As an illustrative example, explicit series form solutions for complex potentials are presented in the case of one interfacial crack. Based on the complex potentials, image forces on the screw dislocation are then calculated using the Peach-Koehler formula. The equilibrium position of the dislocation is discussed in detail for various crack geometries, coating layer thicknesses and material constant combinations. It is shown that the influence of interfacial cracks on the motion of the dislocation near the coated inclusion is significant. The present solutions contain a number of previously known results as special cases.     

A piezoelectric screw dislocation in a three-phase composite cylinder model with an imperfect interface

The electroelastic coupling interaction between a piezoelectric screw dislocation and the embedded circular cross-section inclusions with imperfect interfaces in piezoelectric solids is investigated by using a three-phase composite cylinder model. By means of a complex variable technique, the explicit solutions of electroelastic fields are obtained. With the aid of the Peach-Koehler formula, the explicit expression for the image force exerted on the piezoelectric screw dislocation is derived. The image force on the dislocation and its equilibrium positions near one of the inclusions are discussed for variable parameters (interface imperfection and material electroelastic dissimilarity) and the influence of nearby inclusions is also considered. The results show that when compared with the previous solution (the perfect interface), more equilibrium positions of the screw dislocation in the matrix may be available due to the effect of the interface imperfection when the dislocation is close to the electroelastic stiff inclusion. It is also found that the magnitude of the image force exerted on the piezoelectric screw dislocation produced by multiply inclusions is always smaller than that produced by a single inclusion and the impact of nearby inclusions on the mobility of the screw dislocation is very important.