Computational‐budget‐driven automated microwave design optimization using variable‐fidelity electromagnetic simulations

A robust technique for microwave design optimization is presented. It is based on variable‐fidelity electromagnetic (EM) simulations where the approximate optimum of the “coarser” model becomes an initial design for finding the optimum of the “finer” one. The algorithm automatically switches between the models of different fidelity taking into account the computational budget assumed for the design process. Additional mechanisms enhancing the algorithm include: frequency scaling to reduce the misalignment between the models of different fidelity, as well as the local response surface approximation to reduce the number of EM simulations. The presented technique is particularly suitable for problems where simulation‐driven design is the only option, for example, for wideband antennas and dielectric resonator filters. Our method is demonstrated using two filters and one antenna example. In all cases, the optimal design is obtained at a low computational cost corresponding to a few high‐fidelity simulations of the structure. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Efficient multi‐fidelity design optimization of microwave filters using adjoint sensitivity

A simple and robust algorithm for computationally efficient design optimization of microwave filters is presented. Our approach exploits a trust‐region (TR)‐based algorithm that utilizes linear approximation of the filter response obtained using adjoint sensitivity. The algorithm is sequentially executed on a family of electromagnetic (EM)‐simulated models of different fidelities, starting from a coarse‐discretization one, and ending at the original, high‐fidelity filter model to be optimized. Switching between the models is determined using suitably defined convergence criteria. This arrangement allows for substantial cost reduction of the initial stages of the optimization process without compromising the accuracy and resolution of the final design. The performance of our technique is illustrated through the design of a fifth‐order waveguide filter and a coupled iris waveguide filter. We also demonstrate that the multi‐fidelity approach allows for considerable computational savings compared to TR‐based optimization of the high‐fidelity EM model (also utilizing adjoint sensitivity). © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:178–183, 2015.     

Fast simulation‐driven antenna design using response‐feature surrogates

In this article, a computationally efficient procedure for electromagnetic (EM)‐simulation‐driven design of antennas is presented. Our methodology is based on local approximation models of the antenna response, established using a set of suitably selected characteristic features rather than the entire response (such as reflection versus frequency). The approximation model is utilized to verify the level of satisfying/violating given performance requirements, and to guide the optimization process towards a better design. By exploiting the fact that the dependence of the response features on the designable parameters of the antenna of interest is simple (close to linear or quadratic), the feature‐based optimization converges faster than conventional optimization of frequency‐based EM‐simulated responses. In order to further speed up the design, coarse‐discretization simulations are utilized to estimate the feature gradients with respect to adjustable parameters of the problem at hand. The optimization algorithm is embedded in the trust‐region framework for safeguarding convergence. The proposed technique is demonstrated using two antenna examples. In both the cases, the optimum design is obtained at the computational cost corresponding to a few high‐fidelity EM antenna simulations. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:394–402, 2015.     

Surrogate modeling of impedance matching transformers by means of variable‐fidelity electromagnetic simulations and nested cokriging

Accurate performance evaluation of microwave components can be carried out using full‐wave electromagnetic (EM) simulation tools, routinely employed for circuit verification but also in the design process itself. Unfortunately, the computational cost of EM‐driven design may be high. This is especially pertinent to tasks entailing considerable number of simulations (eg, parametric optimization, statistical analysis). A possible way of alleviating these difficulties is utilization of fast replacement models, also referred to as surrogates. Notwithstanding, conventional modeling methods exhibit serious limitations when it comes to handling microwave components. The principal challenges include large number of geometry and material parameters, highly nonlinear characteristics, as well as the necessity of covering wide ranges of operating conditions. The latter is mandatory from the point of view of the surrogate model utility. This article presents a novel modeling approach that incorporates variable‐fidelity EM simulations into the recently reported nested kriging framework. A combination of domain confinement due to nested kriging, and low‐/high‐fidelity EM data blending through cokriging, enables the construction of reliable surrogates at a fraction of cost required by single‐fidelity nested kriging. Our technique is validated using a three‐section miniaturized impedance matching transformer with its surrogate model rendered over wide range of operating frequencies. Comprehensive benchmarking demonstrates superiority of the proposed method over both conventional models and nested kriging.     

Multifidelity surrogate modeling based on radial basis functions

Multiple models of a physical phenomenon are sometimes available with different levels of approximation. The high fidelity model is more computationally demanding than the coarse approximation. In this context, including information from the lower fidelity model to build a surrogate model is desirable. Here, the study focuses on the design of a miniaturized photoacoustic gas sensor which involves two numerical models. First, a multifidelity metamodeling method based on Radial Basis Function, the co-RBF, is proposed. This surrogate model is compared with the classical co-kriging method on two analytical benchmarks and on the photoacoustic gas sensor. Then an extension to the multifidelity framework of an already existing RBF-based optimization algorithm is applied to optimize the sensor efficiency. The co-RBF method does not bring better results than co-kriging but can be considered as an alternative for multifidelity metamodeling.     

Surrogate‐assisted EM‐driven miniaturization of wideband microwave couplers by means of co‐simulation low‐fidelity models

This article proposes a methodology for rapid design optimization of miniaturized wideband couplers. More specifically, a class of circuits is considered, in which conventional transmission lines are replaced by their abbreviated counterparts referred to as slow‐wave compact cells. Our focus is on explicit reduction of the structure size as well as on reducing the CPU cost of the design process. For the sake of computational feasibility, a surrogate‐based optimization paradigm involving a co‐simulation low‐fidelity model is used. The latter is a fundamental component of the proposed technique. The low‐fidelity model represents cascaded slow‐wave cells replacing the low‐impedance lines of the original coupler circuit. It is implemented in a circuit simulator (here, ADS) and consists of duplicated compact cell EM simulation data as well as circuit theory‐based feeding line models. Our primary optimization routine is a trust‐region‐embedded gradient search algorithm. To further reduce the design cost, the system response Jacobian is estimated at the level of the low‐fidelity model, which is sufficient due to good correlation between the low‐ and high‐fidelity models. The coupler is explicitly optimized for size reduction, whereas electrical performance parameters are controlled using a penalty function approach. The presented methodology is demonstrated through the design of a 1‐GHz wideband microstrip branch‐line coupler. Numerical results are supported by experimental validation of the fabricated coupler prototype.     

Response correction techniques for surrogate‐based design optimization of microwave structures

Simulation‐based optimization has become an important design tool in microwave engineering. However, using electromagnetic (EM) solvers in the design process is a challenging task, primarily due to a high‐computational cost of an accurate EM simulation. In this article, we present a review of EM‐based design optimization techniques exploiting response‐corrected physically based low‐fidelity models. The surrogate models created through such a correction can be used to yield a reasonable approximation of the optimal design of the computationally expensive structure under consideration (high‐fidelity model). Several approaches using this idea are reviewed including output space mapping, manifold mapping, adaptive response correction, and shape‐preserving response prediction. A common feature of these methods is that they are easy to implement and computationally efficient. Application examples are provided. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

EM‐simulation‐driven design optimization of compact microwave structures using multi‐fidelity simulation models and adjoint sensitivities

Reliable design of miniaturized microwave structures requires utilization of full‐wave electromagnetic (EM) simulation models because other types of representations such as analytical or equivalent circuit models are of insufficient accuracy. This is primarily due to considerable cross‐coupling effects in tightly arranged layouts of compact circuits. Unfortunately, high computational cost of accurate EM analysis makes the dimension adjustment process challenging, particularly for traditional methods based on parameter sweeps, but also for conventional numerical optimization techniques. In this article, low‐cost simulation‐driven designs of compact structures were demonstrated using gradient search with adjoint sensitivities as well as multi‐fidelity EM simulation models. The optimization process was arranged sequentially, with the largest steps taken at the level of coarse‐discretization models. Subsequent fine tuning was realized with the models of higher fidelity. Switching between the models was realized by means of adaptively controlled termination conditions. This allowed for considerable reduction of the design cost compared with single‐level optimization. The approach was illustrated using a compact microstrip rat‐race coupler with two cases considered, that is, (i) bandwidth enhancement, and (ii) minimization of the structure size. In both cases, the optimization cost corresponded to a few high‐fidelity EM simulations of the coupler structure. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:442–448, 2016.     

Fast simulation‐driven feature‐based design optimization of compact dual‐band microstrip branch‐line coupler

Design of miniaturized microwave components is a challenging task. On one hand, due to considerable electromagnetic (EM) cross‐couplings in highly compressed layouts full‐wave EM analysis is necessary for accurate evaluation of the structure performance. Conversely, high‐fidelity EM simulation is computationally expensive so that automated determination of the structure dimensions may be prohibitive when using conventional numerical optimization routines. In this article, computationally efficient simulation‐driven design of a miniaturized dual‐band microstrip branch‐line coupler is presented. The optimization methodology relies on suitably extracted features of a highly nonlinear response of the coupler structure under design. The design objectives are formulated in terms of the feature point locations, and the optimization is carried out iteratively with the linear model of the features utilized as a fast predictor. The entire process is embedded in the trust‐region framework as convergence safeguard. Owing to only slightly nonlinear dependence of the features on the geometry parameters of the circuit at hand, the optimized design satisfying prescribed performance requirements is obtained at the low computational cost of only 24 high‐fidelity EM simulations of the structure. Experimental validation of the fabricated coupler prototype is also provided. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:13–20, 2016.     

Phase‐spacing optimization of linear microstrip antenna arrays using simulation‐based surrogate superposition models

A technique for simulation‐driven optimization of the phase excitation tapers and spacings for linear arrays of microstrip patch antennas is presented. Our technique exploits two models of the array under optimization: an analytical model which is based on the array factor, as well as an electromagnetic (EM) simulation‐based surrogate model of the entire array. The former is used to provide initial designs which meet the design requirements imposed on the radiation response. The latter is used for tuning of the array radiation response while controlling the array reflection response as well as for validation of the final design. Furthermore, the simulation‐based surrogate model allows for subsequent evaluation of the array responses in the beam scanning operation at negligible computational costs. The simulation‐based surrogate model is constructed with a superposition of simulated radiation and reflection responses of the array under design with only one radiator active at a time. Low computational cost of the surrogate model is ensured by the EM‐simulation data computed with coarse meshes. Reliability of the model is achieved by means of suitable correction carried out with respect to the high‐fidelity array model. The correction is performed iteratively in the optimization process. Performance, numerical efficiency, and accuracy of the technique is demonstrated with radiation pattern synthesis of linear arrays comprising 32 microstrip patch antennas by phase‐spacing optimization. Properties of the optimal designs in the beam scanning operation are then studied using the superposition models and compared to suitably selected reference designs. The proposed technique is versatile as it also can be applied for simulation‐based optimization of antenna arrays comprising other types of individually fed elements. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:536–547, 2015.     

Low‐cost multiband compact branch‐line coupler design using response features and automated EM model fidelity adjustment

Design closure of compact microwave components is a challenging problem because of significant electromagnetic (EM) cross‐couplings in densely arranged layouts. A separate issue is a large number of designable parameters resulting from replacement of conventional transmission line sections by compact microstrip resonant cells. This increases complexity of the design optimization problem and requires employment of expensive high‐fidelity EM analysis for reliable performance evaluation of the structure at hand. Consequently, neither conventional numerical optimization algorithms nor interactive approaches (e.g., experience‐driven parameters sweeps) are capable of identifying optimum designs in reasonable timeframes. Here, we discuss application of feature‐based optimization for fast design optimization of dual‐ and multiband compact couplers. On one hand, design of such components is difficult because of multiple objectives (achieving equal power split and good matching and port isolation for all frequency bands of interest). On the other hand, because of well‐defined shapes of the S‐parameter responses for this class of components, feature‐based optimization seems to be well suited to control multiple figures of interest as demonstrated in this work. Two‐level EM modeling is used for further design cost reduction. More importantly, we develop a procedure for automated determination of the low‐fidelity EM model coarseness that allows us to find the fastest possible model that still ensures sufficient correlation with its high‐fidelity counterpart, which is critical for robustness of the optimization process. Our approach is illustrated using two dual‐band compact couplers. Experimental validation is also provided.     

Expedited simulation‐driven design optimization of UWB antennas by means of response features

In this work, a method for fast design optimization of broadband antennas is considered. The approach is based on a feature‐based optimization (FBO) concept where reflection characteristics of the structure at hand are formulated in terms of suitably defined feature points. Redefinition of the design problem allows for reducing the design optimization cost, because the dependence of feature point coordinates on antenna dimensions is less nonlinear than for the original frequency characteristics (here, S‐parameters). This results in faster convergence of the optimization algorithm. The cost of the design process is further reduced using variable‐fidelity electromagnetic (EM) simulation models. In case of UWB antennas, the feature points are defined, among others, as the levels of the reflection characteristic at its local in‐band maxima, as well as location of the frequency point which corresponds to acceptable reflection around the lower corner frequency within the UWB band. Also, the number of characteristic points depends on antenna topology and its dimensions. Performance of FBO‐based design optimization is demonstrated using two examples of planar UWB antennas. Moreover, the computational cost of the approach is compared with conventional optimization driven by a pattern search algorithm. Experimental validation of the numerical results is also provided.     

Recent advances in rapid multiobjective optimization of expensive simulation models in microwave and antenna engineering by Pareto front exploration

Practical engineering design problems are inherently multiobjective, that is, require simultaneous control of several (and often conflicting) criteria. In many situations, genuine multiobjective optimization is required to acquire comprehensive information about the system of interest. The most popular solution techniques are population‐based metaheuristics, however, they are not practical for handling expensive electromagnetic (EM)‐simulation models in microwave and antenna engineering. A workaround is to use auxiliary response surface approximation surrogates but it is challenging for higher‐dimensional problems. Recently, a deterministic approach has been proposed for expedited multiobjective design optimization of expensive models in computational EMs. The method relies on variable‐fidelity EM simulations, tracking the Pareto front geometry, as well as response correction. The algorithm sequentially generates Pareto‐optimal designs using a series of constrained single‐objective optimizations. The previously obtained design is used as a starting point for the next iteration. In this work, we review this technique and its modification based on space mapping surrogates. We also propose new variations exploiting adjoint sensitivities, as well as response features, which can be attractive depending on availability of derivatives or the characteristics of the system responses that need to be handled. We also discuss several case studies involving various antenna and microwave components.     

Reduced‐cost microwave filter modeling using a two‐stage Gaussian process regression approach

A technique for the reduced‐cost modeling of microwave filters is presented. Our approach exploits variable‐fidelity electromagnetic (EM) simulations, and Gaussian process regression (GPR) carried out in two stages. In the first stage of the modeling process, a mapping between EM simulation filter models of low and high fidelity is established. The mapping is subsequently used in the second stage, making it possible for the final surrogate model to be constructed from training data obtained using only a fraction of the number of high‐fidelity simulations normally required. As demonstrated using three examples of microstrip filters, the proposed technique allows us to reduce substantially (by up to 80%) the central processing unit (CPU) cost of the filter model setup, as compared to conventional (single‐stage) GPR—the benchmark modeling method in this study. This is achieved without degrading the model generalization capability. The reliability of the two‐stage modeling method is demonstrated through the successful application of the surrogates to surrogate‐based filter design optimization. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:453–462, 2015.     

Some considerations regarding the use of multi-fidelity Kriging in the construction of surrogate models

Surrogate models or metamodels are commonly used to exploit expensive computational simulations within a design optimization framework. The application of multi-fidelity surrogate modeling approaches has recently been gaining ground due to the potential for further reductions in simulation effort over single fidelity approaches. However, given a black box problem when exactly should a designer select a multi-fidelity approach over a single fidelity approach and vice versa? Using a series of analytical test functions and engineering design examples from the literature, the following paper illustrates the potential pitfalls of choosing one technique over the other without a careful consideration of the optimization problem at hand. These examples are then used to define and validate a set of guidelines for the creation of a multi-fidelity Kriging model. The resulting guidelines state that the different fidelity functions should be well correlated, that the amount of low fidelity data in the model should be greater than the amount of high fidelity data and that more than 10 % and less than 80 % of the total simulation budget should be spent on low fidelity simulations in order for the resulting multi-fidelity model to perform better than the equivalent costing high fidelity model.     

Constrained multifidelity optimization using model calibration

Multifidelity optimization approaches seek to bring higher-fidelity analyses earlier into the design process by using performance estimates from lower-fidelity models to accelerate convergence towards the optimum of a high-fidelity design problem. Current multifidelity optimization methods generally fall into two broad categories: provably convergent methods that use either the high-fidelity gradient or a high-fidelity pattern-search, and heuristic model calibration approaches, such as interpolating high-fidelity data or adding a Kriging error model to a lower-fidelity function. This paper presents a multifidelity optimization method that bridges these two ideas; our method iteratively calibrates lower-fidelity information to the high-fidelity function in order to find an optimum of the high-fidelity design problem. The algorithm developed minimizes a high-fidelity objective function subject to a high-fidelity constraint and other simple constraints. The algorithm never computes the gradient of a high-fidelity function; however, it achieves first-order optimality using sensitivity information from the calibrated low-fidelity models, which are constructed to have negligible error in a neighborhood around the solution. The method is demonstrated for aerodynamic shape optimization and shows at least an 80% reduction in the number of high-fidelity analyses compared other single-fidelity derivative-free and sequential quadratic programming methods. The method uses approximately the same number of high-fidelity analyses as a multifidelity trust-region algorithm that estimates the high-fidelity gradient using finite differences.     

An efficient metamodel-based multi-objective multidisciplinary design optimization framework

This paper presents an efficient metamodel-based multi-objective multidisciplinary design optimization (MDO) architecture for solving multi-objective high fidelity MDO problems. One of the important features of the proposed method is the development of an efficient surrogate model-based multi-objective particle swarm optimization (EMOPSO) algorithm, which is integrated with a computationally efficient metamodel-based MDO architecture. The proposed EMOPSO algorithm is based on sorted Pareto front crowding distance, utilizing star topology. In addition, a constraint-handling mechanism in non-domination appointment and fuzzy logic is also introduced to overcome feasibility complexity and rapid identification of optimum design point on the Pareto front. The proposed algorithm is implemented on a metamodel-based collaborative optimization architecture. The proposed method is evaluated and compared with existing multi-objective optimization algorithms such as multi-objective particle swarm optimization (MOPSO) and non-dominated sorting genetic algorithm II (NSGA-II), using a number of well-known benchmark problems. One of the important results observed is that the proposed EMOPSO algorithm provides high diversity with fast convergence speed as compared to other algorithms. The proposed method is also applied to a multi-objective collaborative optimization of unmanned aerial vehicle wing based on high fidelity models involving structures and aerodynamics disciplines. The results obtained show that the proposed method provides an effective way of solving multi-objective multidisciplinary design optimization problem using high fidelity models.     

Rapid design and size reduction of microwave couplers using variable‐fidelity EM‐driven optimization

In this article, fast electromagnetic (EM) simulation‐driven design optimization of compact microwave couplers is addressed. The main focus is on explicit reduction of the circuit footprint. Our methodology relies on the penalty function approach, which allows us to minimize the circuit area while ensuring equal power split between the output ports and providing a sufficient bandwidth with respect to the return loss and isolation around the operating frequency. Computational efficiency of the design process is achieved by exploiting variable‐fidelity EM simulations, local response surface approximation models, as well as suitable response correction techniques for design tuning. The technique described in this work is demonstrated using two examples of compact rat‐race couplers. The size‐reduction‐oriented designs are compared with performance‐oriented ones to illustrate available design trade‐offs. Final design solutions of the former case illustrate ～92% of miniaturization for both coupler examples (with corresponding fractional bandwidths of 16%). Alternative design solutions pertaining to the latter case show a lesser size reduction (～90% for both examples), but present a much wider bandwidths (～25% for both couplers). The overall computational cost of the design procedure corresponds to about 20 and 10 high‐fidelity coupler simulations for the first and second design example, respectively. Numerical results are also validated experimentally. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:27–35, 2016.     

Operation allocation in automated manufacturing system using GA-based approach with multifidelity models

The scheduling problem in manufacturing is considered as among the toughest to solve. The basic drawback of many proposed methods has been the huge amount of computation time for simulation. This paper proposes a framework to solve the operation allocation problem in automated manufacturing systems using the concept of multifidelity. The concept of multifidelity has been proposed by several researchers in order to reduce the computation time for simulation. In this paper, a GA-based heuristic procedure will be developed along with the multifidelity approach to solve a typical manufacturing scheduling problem. Four different fidelity models have been defined on which experimentation is carried out. The proposed method has been tested on a sample dataset and the results have been analysed to choose the fidelity model which best describes the scenario.     

A multifidelity approach for the construction of explicit decision boundaries: application to aeroelasticity

This paper presents a multifidelity approach for the construction of explicit decision boundaries (constraints or limit-state functions) using support vector machines. A lower fidelity model is used to select specific samples to construct the decision boundary corresponding to a higher fidelity model. This selection is based on two schemes. The first scheme selects samples within an envelope constructed from the lower fidelity model. The second technique is based on the detection of regions of inconsistencies between the lower and the higher fidelity decision boundaries. The approach is applied to analytical examples as well as an aeroelasticity problem for the construction of a nonlinear flutter boundary.