Unusual magnetic and transport properties of the CMR Pr<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ca<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3−<Emphasis Type="Italic">y</Emphasis></Subscript> system

The substituted nonstoichiometric perovskite Pr_1−x Ca _x MnO_3−y compounds have been synthesized by a standard combustion technique, which show uniphase solid solutions. The all samples of the Pr_1−x Ca _x MnO_3−y system show an orthorhombic crystal system and the cell volumes are decreased with increasing the larger amounts of substituted atoms or the increasing x values. The mixed valence of Mn ions is identified by the XAS (XANES/EXAFS) spectroscopy and the amounts of Mn⁴⁺ ions are determined by an iodometric titration method. Nonstoichiometric chemical formulas of the Pr_1−x Ca _x Mn_1−τ³⁺Mn_τ⁴⁺O_3−y compounds have been obviously formulated. Magnetic properties are investigated by SQUID and thus the Pr_1−x Ca _x MnO_3−y (x = 0.4, 0.6, and 0.8) compounds show the transition from antiferromagnetic state to paramagnetic state. The Pr_1−x Ca _x MnO_3−y (x = 0.0, 0.2, and 1.0) compounds show the transition from ferromagnetic state to paramagnetic state. The facts that Mn⁴⁺ contents play important roles in the magnetic ordering have been found out. The transport properties have been studied by the DC electrical conductivity measurement under magnetic fields of 0 G and 3 kG. Maximum and minimum MR ratios are 1016% of the Pr_0.6Ca_0.4MnO_2.846, and −77.5% of the PrMnO_3.021 compound, respectively.     

Enhanced Superconducting Properties of Air-Processed GdBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript> Single Domains with BaCO<Subscript>3</Subscript>/BaCuO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript> Addition

Single domain GdBa₂Cu_7-δ (Gd123) bulk superconductors were fabricated in air by top-seeding melt-texture growth. Performance of the air-processed Gd123 was successfully enhanced by addition of both BaCO₃ and BaCuO_2−x , which suppress the formation of Gd_1+x Ba_2−x Cu₃O_7-δ solid solutions. The optimum doping amount ranges from 0.05 to 0.15, M BaCO₃ and 0.05 to 0.1, M BaCuO_2−x per molar Gd123. The distribution of the second phase particles was observed by scanning electron microscopy. A narrow band formed by Gd₂BaCuO₅ particle concentration appeared around the seeding zone in both a–b plane and c-growth sector in Gd123 single grain. Trapped magnetic field density reached 0.67, T for sample with 24 mm in diameter and 8, mm in thickness and a high critical current density J _c up to 91,200, A/cm² was achieved at 77, K under self-field.     

Study of structure and properties of ZnO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Glasses of the ternary system ZnO–Bi₂O₃–P₂O₅ were prepared and studied in two compositional series 50ZnO–xBi₂O₃–(50 − x)P₂O₅ and (50 − y)ZnO–yBi₂O₃–50P₂O₅. Two distinct glass-forming regions were found in the 50ZnO–xBi₂O₃–(50 − x)P₂O₅ glass series with x = 0–10 and 20–35 mol.% Bi₂O₃. All prepared Bi₂O₃-containing glasses reveal a high chemical durability. Small additions of Bi₂O₃ (∼5 mol.%) improve thermal stability of glasses. All glasses crystallize on heating within the temperature range of 505–583 °C. Structural studies by Raman and ³¹P MAS NMR spectroscopies showed the rapid depolymerisation of phosphate chains within the first region with x = 0–15 and the presence of isolated Q⁰ phosphate units within the second region with x = 20–35. Raman studies showed that bismuth is incorporated in the glass structure in BiO₆ units and their vibrational bands were observed within the spectral region of 350–700 cm⁻¹. The evolution of properties and the spectroscopic data are both in accordance with a network former effect of Bi₂O₃.     

Electrical properties of V<Subscript>2</Subscript>O<Subscript>5</Subscript>-CaO-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses exhibiting majority charge carrier reversal

The thermoelectric power and d.c electrical conductivity of x V₂O₅⋅40CaO⋅(60−x)P₂O₅ (10 ≤ x ≤ 30) glasses were measured. The Seebeck coefficient (Q) varied from +88 μ V K⁻¹ to −93 μV K⁻¹ as a function of V₂O₅ mol%. Glasses with 10 and 15 mol% V₂O₅ exhibited p-type conduction and glasses with 25 and 30 mol% V₂O₅ exhibited n-type conduction. The majority charge carrier reversal occurred at x = 20 mol% V₂O₅. The variation of Q was interpreted in terms of the variation in vanadium ion ratio (V^{5 +}/V^{4 +}). d.c electrical conduction in x V₂O₅⋅40CaO⋅(60−x)P₂O₅ (10 ≤ x ≤ 30) glasses was studied in the temperature range of 150 to 480 K. All the glass compositions exhibited a cross over from small polaron hopping (SPH) to variable range hopping (VRH) conduction mechanism. Mott parameter analysis of the low temperature data gave values for the density of states at Fermi level N (E_F) between 1.7 × 10²⁶ and 3.9 × 10²⁶ m⁻³ eV⁻¹ at 230 K and hopping distance for VRH (R_VRH) between 3.8 × 10⁻⁹m to 3.4 × 10⁻⁹ m. The disorder energy was found to vary between 0.02 and 0.03 eV. N (E_F) and R_VRH exhibit an interesting composition dependence.     

Synthesis and structural studies of Na<Subscript>2</Subscript>O-ZnO-ZnF<Subscript>2</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> oxyfluoride glasses

This paper describes the synthesis and spectroscopic studies of the glass system, 20Na₂O-(20-x) ZnO-xZnF₂-60B₂O₃(x = 0, 5, 10, 15, 20), prepared by melt quenching method. The analyses of DSC and XRD did not show the crystallinity of the glass sample. ¹¹B MAS-NMR shows the presence of sharp peak around −14 ppm. From the IR studies, the broadening of the peak around 1200–1400 and 800–1100 cm⁻¹ shows the presence of mixed linkages like B-O-B, B-O-Zn in the network.     

Low-field Magnetoresistance,Specific Heat and Magnetocaloric Effect in Sr Substituted Pr<Subscript>0.7</Subscript>Ca<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript>

We investigate the effect of ionic size variation on the electrical and thermodynamic properties in a series of Pr_0.7Ca_0.3−x Sr _x MnO₃ (PCSMO) samples. The increase in Sr content results in an increase of the unit cell volume, as a bigger Sr²⁺ ion replaces the smaller Ca²⁺ ions. Resistivity measurements show that the increase in the Sr content also results in the induction of a metal–insulator transition (T _MI), which increases with increasing Sr content. The activation energy (E _a), calculated from the resistivity data, decreases with increasing Sr content confirming the metallic character. The effect of the magnetic field on resistivity and specific heat has also been studied.     

Study of gel grown mixed crystals of Ba<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Ca<Subscript>(1−<Emphasis Type="Italic">x</Emphasis>)</Subscript>(IO<Subscript>3</Subscript>)<Subscript>4</Subscript>

The growth of mixed crystals of Ba _x Ca_1−x (IO₃)₄ were carried out with simple gel method. The effect of various parameters such as pH of gel solution, gel concentration, gel setting time, concentration of reactants on the growth was studied. Crystals having different morphologies and habits were obtained. The grown crystals were characterized by XRD, FT-IR, EDAX, TGA, DTA and DSC.     

Superprotonic CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript>-CsHSO<Subscript>4</Subscript> solid solutions

We have performed partial HSO₄⁻ substitution in CsH₂PO₄ and studied the associated structural changes and the proton conductivity of the resultant (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions in the range x = 0.01–0.3. The results indicate that, at room temperature, the solid solutions are disordered. In the range x = 0.01–0.1, they are isostructural with the low-temperature phase of CsH₂PO₄ (sp. gr. P2₁/m), and their unit-cell parameters increase with x, whereas in the range x = 0.15–0.3 the solid solutions are isostructural with the high-temperature, cubic phase of CsH₂PO₄ (Pm3m), and their unit-cell parameter decreases. The conductivity of the (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions with x ≤ 0.3 depends significantly on their composition and increases at low temperatures by up to four orders of magnitude, approaching that of the superionic phase of CsH₂PO₄ in the range x = 0.15–0.3 because of the hydrogen bond weakening and increased proton mobility. The conductivity of the superionic phase decreases with increasing x by no more than a factor of 1.5–2, and the superionic phase transition, which occurs at 231°C in CsH₂PO₄, shifts to lower temperatures and disappears for x ≥ 0.15. The activation energy for low-temperature conduction decreases with increasing x: from 0.9 eV in CsH₂PO₄ to 0.48 eV at x = 0.1.     

Studies on a.c. properties of Ca<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Sr<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>TiO<Subscript>3</Subscript> perovskites

A.c. measurements were preformed on bulk samples of Ca_1−x Sr _x TiO₃ (CST) perovskites with x = 0, 0.1 and 0.5 as a function of temperature range 300–450 K and frequency range 10³–10⁵ Hz . The experimental results indicate that the a.c. conductivity σ_a.c.(ω), dielectric constant ε′ and dielectric loss ε′′ depend on the temperature and frequency. The a.c. conductivity as a function of frequency is well described by a power law Aω ^S with s the frequency exponent. The obtained values of s > 1 decrease with increasing temperature. The present results are compared to the principal theories that describe the universal dielectric response (UDR) behavior.     

Synthesis of Ba<Subscript>3</Subscript>ZnNb<Subscript>2</Subscript>O<Subscript>9</Subscript>−Sr<Subscript>3</Subscript>ZnNb<Subscript>2</Subscript>O<Subscript>9</Subscript> solid solution and their dielectric properties

Oxides of the type, Ba_3-xSr_xZnNb₂O₉ (0 ≤x ≤3), were synthesized by the solid state route. Oxides calcined at 1000°C show single cubic phase for all the compositions. The cubic lattice parameter (a) decreases with increase in Sr concentration from 4.0938(2) forx = 0 to 4.0067(2) forx = 3. Scanning electron micrographs show maximum grain size for thex = 1 composition (∼ 2 μm) at 1200°C. Disks sintered at 1200°C show dielectric constant variation between 28 and 40 (at 500 kHz) for different values of x with the maximum dielectric constant atx = 1.     

Synthesis and photoluminescence properties of LiEu(W,Mo)<Subscript>2</Subscript>O<Subscript>8</Subscript>:Bi<Superscript>3+</Superscript> red-emitting phosphor for white-LEDs

LiEu_1−x (W_2−y Mo _y )O₈:xBi³⁺ series red-emitting phosphors were synthesized by solid state reaction. The structure, morphology, and photoluminescent properties of phosphors were studied by X-ray powder diffraction, scanning electron microscopy, and photoluminescence spectrum, respectively. X-ray powder diffraction analysis showed that the as-obtained phosphors belong to the scheelite structure. The average particle size of the investigated phosphor was about 8 μm. The excitation spectrum exhibits a charge-transfer broad band along with some sharp peaks from the typical 4f–4f transitions of Eu³⁺. Under excitation of UV, near-UV, or blue light, these phosphors showed strong red emission at 615 nm due to ⁵D₀–⁷F₂ transition of Eu³⁺. The incorporation of Mo⁶⁺ into LiEuW₂O₈:Bi³⁺ could induce red-shift of the charge-transfer broad band and a remarkable increase of photoluminescence. The highest red-emission intensity was observed with LiEu_0.80Mo₂O₈:0.20Bi³⁺. Compared with the commercial red-emitting phosphor, Y₂O₂S:Eu³⁺, the emission intensity of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor is much stronger than that of Y₂O₂S:Eu³⁺ and its chromaticity coordinates are closer to the standard values than that of the commercial phosphor. The optical properties of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor make it attractive for the application in white-light-emitting diodes (LEDs), in particular for near-UV InGaN-based white-LEDs.     

Phase developments and dielectric responses of barium substituted four-layer CaBi<Subscript>4</Subscript>Ti<Subscript>4</Subscript>O<Subscript>15</Subscript> Aurivillius

In this paper, mixed Ca–Ba oxide Ca_1 − x Ba _x Bi₄Ti₄O₁₅ (CBBT) ceramics, fabricated by the improved traditional ceramics process were investigated by doping concentrations of Ba ion up to x =\emph{x} {=} 0·9 (in steps of 0·1). At room temperature, an orthorhombic crystal system was confirmed using XRD, and their parameter was obtained using the Rietveld method. Dielectric properties and phase transitions were studied and are explained in terms of lattice response of these ceramics. A shift in ferroelectric–paraelectric phase transition (T_C\emph{T}_{C}) to lower temperatures and a corresponding decrease in permittivity peak with increasing concentration of Ba^2 + are also observed. The ferroelectric–paraelectric phase transition of CBBT compounds is of normal type in nature, differing from the relaxor characteristic of BBT. The decrease of orthorhombicity in the lattice structure by the larger Ba^2 + ion incorporation, indicating an approach of a and b, results in lower Curie temperature. Appearance of anomalous loss peaks of Ba-rich compounds at 530°C reveals a phase transition development trend from ferroelectric orthorhombic structure to the paraelectric orthorhombic structure. Relationship of polarization with lattice response is discussed.     

Morphology and conductivity studies of a new solid polymer electrolyte: (PEG)<Subscript>x</Subscript>LiClO<Subscript>4</Subscript>

A new solid polymer electrolyte, (PEG)_xLiClO₄, consisting of poly(ethylene)glycol of molecular weight 2000 and LiClO₄ was prepared and characterized using XRD, IR, SEM, DSC, NMR and impedance spectroscopy techniques. XRD and IR results show the formation of the polymer-salt complex. The samples with higher salt concentration are softer, less opaque and less smooth compared to the low salt concentration samples. DSC studies show an increase in the glass transition temperature and a decrease in the degree of crystallinity with increase in the salt concentration. Melting temperature of SPEs is lower than the pure PEG 2000. Room temperature¹H and⁷Li NMR studies were also carried out for the (PEG)_xLiClO₄ system. The¹H linewidth decreases as salt concentration increases in a similar way to the decrease in the crystalline fraction and reaches a minimum at aroundx = 46 and then increases.⁷Li linewidth was found to decrease first and then to slightly increase after reaching a minimum atx = 46 signifying the highest mobility of Li ions for this composition. Room temperature conductivity first increases with salt concentration and reaches a maximum value (σ = 7.3 × 10⁻⁷ S/cm) atx = 46 and subsequently decreases. The temperature dependence of the conductivity can be fitted to the Arrhenius and the VTF equations in different temperature ranges. The ionic conductivity reaches a high value of ∼10 ⁻⁴S/cm close to the melting temperature.     

Investigation on Electrical and Magnetic Properties of Gd-doped BiFeO<Subscript>3</Subscript>

Multiferroic ceramic samples of Bi_1−x Gd _x FeO₃ (x=0, 0.05, 0.1 and 0.15) have been prepared by rapid liquid-phase sintering technique. The effect of Gd substitution on ferroelectric and magnetic properties of Bi_1−x Gd _x FeO₃ ceramics has been investigated. The results of X-ray diffraction (XRD) patterns show that the single-phase BiFeO₃ sample has a rhombohedral structure and Gd³⁺ substitution for Bi³⁺ has not affected its structure. Experimental results suggest that for Bi_1−x Gd _x FeO₃ system, the ferroelectric and magnetic properties of BiFeO₃ are improved by Gd doping and the loop area increases with the Gd content. When x=0.15, saturated ferroelectric hysteresis loop is observed at room temperature with the maximal 2Pr=1.62 μC/cm², which is about 578.6% higher than that of BiFeO₃.     

Spectroscopic studies of TeO<Subscript>2</Subscript>–ZnO–Er<Subscript>2</Subscript>O<Subscript>3</Subscript> glass system

Series of glass based on the (80 − x)TeO₂–20ZnO–(x)Er₂O₃ system (0.5 mol% ≤ x ≤ 2.5 mol%) has successfully been made by melt quenching technique. The optical properties of glass have been investigated by means of IR and Raman spectroscopy. It is observed that as the Er₂O₃ content is being increased, the sharp IR absorption peaks are consistently shifted from 650 to 672 cm⁻¹ while the Raman shift intensity around 640–670 cm⁻¹ is decreases but increases around 720–740 cm⁻¹. It is found out that both phenomenons are related to the structural changes between the stretching vibration mode of TeO₄ tbp and TeO₃ tp, and bending vibration mode of Te–O bonds in the glass linkages.     

Effects of Nd-substitution on microstructures and dielectric characteristics of CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> ceramics

Ca_1−3x/2Nd _x Cu₃Ti₄O₁₂ (x = 0, 0.1, 0.2) ceramics were prepared by a solid state reaction process, and single-phased structures were obtained for all the compositions. The dielectric characteristics of pure and Nd-substituted CaCu₃Ti₄O₁₂ ceramics were investigated together with the microstructures. The mixed-valent structures of Cu⁺/Cu²⁺ and Ti³⁺/Ti⁴⁺ in the present ceramics were confirmed by X-ray photoelectron analysis. The dielectric relaxation in the low temperature range was examined in detail and the variation of dielectric constant and dielectric loss was attributed to the modification mixed-valent structures.     

Synthesis and luminescence properties of Eu<Superscript>2+</Superscript>-doped Li<Subscript>2</Subscript>SrSiO<Subscript>4</Subscript>

We have studied the luminescence spectra of Li₂Sr_{1 − x} Eu _x SiO₄ (x = 0.0001–0.01) solid solutions prepared by solid-state reactions and a sol-gel process in a reducing atmosphere. The spectra show a broad band in the range 500–700 nm, centered at 578 nm, which is due to the 4f ⁶5d → 4f ⁷ transition. The luminescence excitation spectrum shows, in addition to bands due to Eu²⁺ 4f ⁷ → 4f ⁶5d transitions, a strong band centered at 174 nm, attributable to absorption in the SiO₄⁴⁻ group.     

Synthesis and properties of AgTi<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-based NASICON-type phosphates doped with Nb<Superscript>5+</Superscript>, Zr<Superscript>4+</Superscript>, and Ga<Superscript>3+</Superscript>

We have synthesized materials based on a silver titanium phosphate with partial substitution of tri-, tetra-, or pentavalent cations for titanium: Ag_1±x Ti_2−x M _x (PO₄)₃ (M = Nb⁵⁺, Ga³⁺) and AgTi_2−x Zr _x (PO₄)₃. The materials have been characterized by X-ray diffraction and impedance spectroscopy and have been shown to have small thermal expansion coefficients. Their ionic conductivity has been determined. Silver ions in these materials are difficult to replace with protons.     

Crystal structure and resistivity studies on PrBa2 −x Pr x Cu3O7 −y oxide system

The compound PrBa₂Cu₃O_{7 −y} is not superconducting while most other RBa₂Cu₃O_{7 −y} (R=rare earth) compounds exhibit superconductivity in the 90K range. The system PrBa_{2 −x} Pr _x Cu₃O_{7 −x} has been prepared to study the effect of excess Pr at the Ba site on the structure, resistivity and magnetic behaviour of this system. It is observed that single-phase compounds in the above series form forx=0·8—that is up to the composition Pr_1·8Ba_1·2Cu₃O_{7 −y} . While stoichiometric PrBa₂Cu₃O_{7 −y} is orthorhombic, the compounds with excess Pr show tetragonal structure. Four-probe dc resistivity measurements show that all the single-phase compounds in the above series do not exhibit superconductivity and are semiconducting down to 12 K. Magnetic susceptibility measurements reveal deviation from Curie-Weiss behaviour starting at a characteristic temperature, which is taken to be the ordering temperature (T _N ) of the Pr moments. BothT _N and overall resistivity decrease with increasingx and may have a common origin.     

Phase,microstructural characterization and dielectric properties of Ca-substituted Sr<Subscript>5</Subscript>Nb<Subscript>4</Subscript>TiO<Subscript>17</Subscript> ceramics

The effect of Ca substitution for Sr on the phase, microstructure and microwave dielectric properties of the Sr_5−x Ca _x Nb₄TiO₁₇ composition series was investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), an LCR meter, and vector network analyzer. Below 1450 °C, Sr_5−x Ca _x Nb₄TiO₁₇ (x = 1, 2, 3, or 4) compositions formed single-phase Sr₄CaNb₄TiO₁₇, Sr₃Ca₂Nb₄TiO₁₇, Sr₂Ca₃Nb₄TiO₁₇, and SrCa₄Nb₄TiO₁₇ ceramics, respectively. At x = 0 and 5, Sr₅Nb₄TiO₁₇ and Ca₅Nb₄TiO₁₇ formed, but along with Sr₂Nb₂O₇ (at x = 0) and CaNbO₃ and CaNb₂O₆ (at x = 5) secondary phases. Above 1450 °C, all the compositions formed two-phase ceramics. At low frequencies, a phase transition was observed in the composition Sr₅Nb₄TiO₁₇. The substitution of Ca for Sr enabled processing of highly dense Sr₂Ca₃Nb₄TiO₁₇, with ε_r ~ 53.4, τ_f ~ −6.5 ppm/°C and Q _u  × f _o  ~ 1166 GHz. Further investigations are required to improve the quality factor of these ceramics for possible microwave applications.