Microstrip Lowpass Filter with Very Sharp Transition Band and Wide Stopband

A novel lowpass filter with a very sharp transition band and wide stopband is proposed. The proposed filter is based on T‐shaped patches which are etched in symmetrical structures and folded open stub. To obtain a wide stopband, we have used stub loaded semi‐circle stepped‐impedance structures. By designing the resonator with high inductance and capacitance, a very sharp transition band is achieved. The proposed filter has a 3‐dB cutoff frequency at 2.37 GHz and a 40‐dB rejection at 2.44 GHz. The stopband with an attenuation level better than –13.2 dB is up from 2.4 GHz to 16 GHz, and consequently we have reached the high and wide rejection in stopband with compact size. Good agreements between the simulated and the measured results are presented.     

Wide-stopband microstrip low-pass filter using modified semi-circle patch resonator

In this article, a compact microstrip low-pass filter with elliptic-function response is proposed. To achieve wide stopband, modified semi-circle patch resonator in series with semi-circle stepped impedance resonator is used. The proposed structure achieves a wide stopband and a high selectivity within a small circuit area. The proposed filter has 3-dB cutoff frequency at 1.71?GHz and 20?dB rejection at 2.1?GHz. The stopband with the attenuation level better than ?18.7?dB is from 2.08 up to 16?GHz, and consequently we have reached the high and wide rejection in stopband as well as compact size. The structure is simulated, fabricated and measured. The measured results are in good agreement with the simulated results.     

Compact lowpass filter using stepped impedance hairpin resonator

A novel microwave lowpass filter using a microstrip stepped impedance hairpin resonator is proposed. This filter has the advantages of compact size, easy fabrication, and sharp cutoff frequency response. The filter is useful for many microwave system applications     

基于阶梯阻抗的发夹结构低通滤波器设计

提出一种基于阶梯阻抗发夹谐振器的小型化微波低通滤波嚣,该滤波嚣仅由包含四节微带的阶梯阻抗发夹谐振器构成.设计结果表明,滤波器3dB通带从直流到2.8G,带内反射小于-20dB,带外抑制达到40dB.这种滤波器尺寸小,易制造,且具有陡峭的截止频率响应特性,可用于许多微波系统中.     

Microstrip Lowpass Filter with Very SharpTransition Band Using T‐Shaped,Patch, and Stepped Impedance Resonators

A compact microstrip lowpass filter (LPF) with an elliptic function response is proposed. A high equivalent capacitance and inductance between the structures of the resonator result in the sharp transition band of 0.04 GHz from 4 GHz to 4.04 GHz with an attenuation level of ?3 dB and ?20 dB, respectively. To improve the LPF rejection band, multiple open stubs are connected to the proposed resonator. A filter with a 3‐dB cut‐off frequency at 4 GHz is designed, fabricated, and measured, and agreement between the measured and simulated results is achieved. The results show that a stopband bandwidth of 131% with a suppression level better than ?20 dB is obtained while achieving a compact size with a wide stopband.     

基于阶梯阻抗发夹谐振器的小型低通滤波器

提出一种基于阶梯阻抗发夹谐振器的小型化微波低通滤波器,该滤波器仅由包含一节微带线的阶梯阻抗发夹谐振器构成。设计结果表明,滤波器3dB通带从DC(Direct Current)到2GHz,回波损耗优于10dB,且插入损耗从DC到1.7GHz时优于0.5dB,带外抑制从2.9～4GHz优于20dB。仿真结果和实验结果吻合良好。这种滤波器尺寸小,易制造,且具有陡峭的截止频率响应特性,可应用于许多微波系统中。     

Compact wide stopband lowpass filter using spiral loaded tapered compact microstrip resonator cell

A new spiral loaded tapered compact microstrip resonator cell (SPLT-CMRC) is presented. The addition of spiral stubs to the CMRC creates transmission zeroes in the stopband which extended the stopband of the ?lter. The proposed resonator is used to design a compact lowpass ?lter (LPF) with wide and high rejection in stopband. The fabricated ?lter has a 3 dB cutoff frequency at 8 GHz. The insertion loss in the passband is less than 0.2 dB from DC to 7.2 GHz. The proposed ?lter has wide stopband from 9.47 to 40 GHz with attenuation level of ?20 dB. The demonstrated filter is designed and fabricated. There is a good agreement between the measured and simulated S-parameters.     

一种新颖的开口环地面缺陷结构低通滤波器

提出了一种新颖的具有陡峭边带和宽阻带的小型化低通滤波器.通过把开口谐振环地面缺陷结构(Split-Ring Resonator Defected Ground Structure,SRR DGS)与阶梯阻抗梳状谐振器结合,提高了滤波器的选择特性,同时获得了宽阻带.对所提出的结构作了加工并进行了实物测量,测试结果表明:滤波器选择特性大于160 dB/GHz,在2.98 GHz到8.2 GHz范围内抑制度大于20 dB,而占用面积仅为20×25 mm~2.     

Compact microstrip lowpass filter using shunt open stubs and coupled slots on ground plane

A compact microstrip lowpass filter with prominent cutoff sharpness and very wide stopband is presented. The microstrip lowpass filter is composed of a transmission line with shunt open stubs on the topside of the microstrip structure and coupled slots on the ground plane. The shunt open stub microstrip filter with slots on the ground plane has a wide stopband at high frequency, and the coupled slot on the ground plane has sharp cutoff response at low frequency. The combined characteristics of these structures make for an excellent lowpass filter performance.     

Compact Ultra-Wideband Bandpass Filter With Improved Upper Stopband

In this letter, a design of a compact bandpass filter with wide upper stopband is presented for the ultra-wideband communication systems. The filter structure is composed of a modified square slot-line resonator with parallel microstrip feed lines. Improved upper stopband is obtained by exploiting the frequency dispersive coupling behavior between the feed lines and the resonator. Measurements show that the 20.9 dB upper stopband extends at least up to 20 GHz. Filter occupying area is 0.26lambdag times 0.28g, lambdag being the microstrip line guided wavelength at 6.85 GHz.     

Microstrip Coupled-Line Lowpass Filter with Wide Stopband for RF/Wireless Systems

We present the design of a compact microstrip lowpass filter with a wide stopband which is up to ten times the cutoff frequency. The filter is based on a coupled-line configuration and shunt open stubs. The open stubs create additional transmission zeros, which are used to extend the stopband of the filter without any additional components or cascaded units. A prototype lowpass filter with a 3 dB cutoff frequency of 0.428 GHz and a 15 dB stopband extended up to 4.77 GHz is fabricated to validate the theoretical predictions.     

A novel microstrip lowpass filter with sharp roll-off and ultra-wide stopband using SICMRC

This paper presents a novel microstrip lowpass filter with sharp roll-off and ultra-wide stopband using stepped-impedance resonator and bended transmission line structure. The filter includes stepped-impedance prototype filter and stepped-impedance compact microstrip resonator cells that are combined in one structure. The proposed filter has good specifications such as sharp roll-off, ultra-wide stopband and low insertion loss. The transition band is approximately 0.25 GHz from 1.75 to 2 GHz with corresponding attenuation levels of ?3 and ?40 dB. The attenuation level in the stopband is better than ?20 dB that is achieved from 1.94 to 23 GHz, and the insertion loss in the passband is less than 0.4 dB. The proposed filter is fabricated and measured, and the simulation and measurement results are found to be in good agreement with each other.     

宽阻带阶跃阻抗发夹线带通滤波器设计

提出了新的抑制微带带通滤波器寄生通带的方法。这种方法通过级联阶跃阻抗发夹线谐振器构成的椭圆函数低通滤波器于带通滤波器的输入/输出端,显著改善了后者的阻带抑制特性。本文基于新的等效电路模型,推导出了此类低通滤波器的阻带传输零点位置。设计了L波段宽阻带阶跃阻抗发夹线带通滤波器验证了理论分析和设计过程的正确性。     

Compact microstrip lowpass filter with very sharp roll-off using meandered line resonators

In this paper, a new compact size microstrip lowpass filter (LPF) with a very sharp roll-off is presented to apply in the modern wireless networks. The proposed LPF is designed using the series main resonators with meandered lines based on inductor-capacitor (LC) equivalent circuit analysis. The main goal is to achieve maximum-sharp roll-off by maintaining a wide stopband bandwidth and high return loss (RL). The main resonator of the proposed filter is consisted of two meandered line hairpin resonators (MLHR), and a meandered line T-shaped resonator (MLTR). The designed suppressor is composed of two coupled radial stubs to create a wide stopband. Low return loss in the passband, which has been created by the main resonator, is resolved by the suppressor structure with high return loss. The measured results show a ??3 dB cut-off frequency of 1.93 GHz. The very sharp transition band starts at 1.93 to 1.97 GHz (from ??3 to ??20 dB). The stopband is from 1.97 to 19.9 GHz (with the suppression level of ??20 dB). Also, the total size of the proposed LPF is only 13.3?×?10.1 mm².

     

宽阻带超宽带带通滤波器的设计

提出了一种新型结构的超宽带带通滤波器。这种滤波器结构基于最优的短路支节传输线滤波器,短路支节之间的连接线替换成一种层叠结构的阶跃阻抗发夹线。阶跃阻抗发夹线谐振器的低通滤波性能较好地实现了滤波器的阻带衰减,而对滤波器的通带传输特性影响小。由于阶跃阻抗发夹线的慢波特性,滤波器的尺寸在长度上缩减了23%,其结构更加紧凑。     

一种高滚降宽阻带低通微带滤波器

普通的阶梯阻抗低通滤波器滚降系数一般低于80 dB/GHz,阻带抑制小于20 dB,使其应用受到较大限制;文中首先从理论上分析并设计了具有宽阻带优势的阶梯阻抗滤波器,然后引入扇形短截线结构提高滚降系数,设计了一款通带为0~6 GHz 的高滚降宽阻带的微带低通滤波器。利用ADS 和HFSS分别对滤波器进行了建模、仿真和优化;最后采用RO4003 板材加工并对实物进行了测试。测试结果显示,所设计的滤波器3 dB 截止频率为6.02 GHz,滚降系数为123 dB/ GHz,阻带6.24~20 GHz,阻带抑制大于30 dB。     

Compact lowpass filter using spiral compact microstrip resonant cells

A novel lowpass filter using spiral compact microstrip resonant cells (SCMRCs) for size reduction is presented. Four SCMRC resonators as open stub lines are connected at both sides of an SCMRC resonator so that the port impedance at the lowpass band is matched to 50 /spl Omega/. The proposed lowpass filter has compact circuit size and wide stop-band. A demonstration lowpass filter is designed, fabricated and measured. It shows low insertion loss, flat response in the lowpass band and wide stop-band.     

小型化宽频带宽阻带微带滤波器的设计

目前研究宽频带微带滤波器的文献很多,但普遍不能同时具有宽频带和宽阻带的性能,且带内回波损耗大,带外抑制差。为此,提出了一种新型的宽频带微带滤波器。该滤波器采用在E型阶跃阻抗谐振器( SIR)中引入U型结构的方法,实现其宽频带宽阻带的性能。对滤波器进行仿真、加工与实测,仿真结果与实测结果吻合良好。加工得到的滤波器3 dB带宽为7.1 GHz,低于-20 dB的高频阻带为9.3 GHz,带内回波损耗低于-23.2 dB,实物尺寸为15 mm伊8.5 mm,具有小型化的特点。实测数据表明,提出的滤波器具有良好的性能,在工程领域具有实际的应用价值。     

Miniaturized microstrip lowpass filter using cylindrical-shaped resonators for integrated applications

A novel compact microstrip lowpass filter is presented in this paper. The structure uses stepped impedance and radial patches and it has the ??3 dB cut-off frequency at 4.39 GHz. The proposed lowpass filter has a wide rejection band from 6 to 30 GHz with rejection level more than ??20 dB. It has also other advantages such as: low insertion-loss <?0.1 dB and high return-loss more than 22 dB in 80% of the passband. The circuit size of the presented filter is about 90 mm². Such important advantages make the proposed lowpass filter applicable to be integrated in many high frequency circuits such as power amplifiers, oscillators, couplers and power dividers. It also can block the unwanted video transmitter interference nearby 4 GHz such as implementing between transmitter and antenna. The lowpass filter has simulated and fabricated and a good agreement was seen between the simulation and fabrication results.     

Compact microstrip lowpass filter with wide stopband and sharp roll-off using tapered resonator

In this article, a novel microstrip lowpass filter (LPF) with specifications such as sharp cut-off, wide stopband, low insertion loss and high return loss using tapered resonator is presented. The LPF has cut-off frequency of 1.11 GHz, where unwanted harmonics are suppressed by novel tapered cells. The bandwidth is enhanced, and the size is reduced as compared to the conventional tapered filter. The transition band is approximately 0.29 GHz from 1.11 to 1.4 GHz with corresponding attenuation levels of –3 and –20 dB, respectively. The stopband with greater than –20 dB rejection is from 1.4 to 8.9 GHz, insertion loss in the passband is less than 0.1 dB, return loss is less than –18 dB and the overall size of the filter is 0.12 × 0.073 λ_g. The proposed filter is fabricated and measured. The simulation and measurement results are in good agreement. This LPF is designed for microwave communication applications, especially wireless video transmitters.