Cogent and Energy Efficient Authentication Protocol for WSN in IoT

Given the accelerating development of Internet of things (IoT), a secure and robust authentication mechanism is urgently required as a critical architectural component. The IoT has improved the quality of everyday life for numerous people in many ways. Owing to the predominantly wireless nature of the IoT, connected devices are more vulnerable to security threats compared to wired networks. User authentication is thus of utmost importance in terms of security on the IoT. Several authentication protocols have been proposed in recent years, but most prior schemes do not provide sufficient security for these wireless networks. To overcome the limitations of previous schemes, we propose an efficient and lightweight authentication scheme called the Cogent Biometric-Based Authentication Scheme (COBBAS). The proposed scheme is based on biometric data, and uses lightweight operations to enhance the efficiency of the network in terms of time, storage, and battery consumption. A formal security analysis of COBBAS using Burrows–Abadi–Needham logic proves that the proposed protocol provides secure mutual authentication. Formal security verification using the Automated Validation of Internet Security Protocols and Applications tool shows that the proposed protocol is safe against man-in-the-middle and replay attacks. Informal security analysis further shows that COBBAS protects wireless sensor networks against several security attacks such as password guessing, impersonation, stolen verifier attacks, denial-of-service attacks, and errors in biometric recognition. This protocol also provides user anonymity, confidentiality, integrity, and biometric recovery in acceptable time with reasonable computational cost.     

An End-to-End Authentication Scheme for Healthcare IoT Systems Using WMSN

The healthcare internet of things (IoT) system has dramatically reshaped this important industry sector. This system employs the latest technology of IoT and wireless medical sensor networks to support the reliable connection of patients and healthcare providers. The goal is the remote monitoring of a patient’s physiological data by physicians. Moreover, this system can reduce the number and expenses of healthcare centers, make up for the shortage of healthcare centers in remote areas, enable consultation with expert physicians around the world, and increase the health awareness of communities. The major challenges that affect the rapid deployment and widespread acceptance of such a system are the weaknesses in the authentication process, which should maintain the privacy of patients, and the integrity of remote medical instructions. Current research results indicate the need of a flexible authentication scheme. This study proposes a scheme with enhanced security for healthcare IoT systems, called an end-to-end authentication scheme for healthcare IoT systems, that is, an E2EA. The proposed scheme supports security services such as a strong and flexible authentication process, simultaneous anonymity of the patient and physician, and perfect forward secrecy services. A security analysis based on formal and informal methods demonstrates that the proposed scheme can resist numerous security-related attacks. A comparison with related authentication schemes shows that the proposed scheme is efficient in terms of communication, computation, and storage, and therefore cannot only offer attractive security services but can reasonably be applied to healthcare IoT systems.     

Secure Multifactor Remote Access User Authentication Framework for IoT Networks

The term IoT refers to the interconnection and exchange of data among devices/sensors. IoT devices are often small, low cost, and have limited resources. The IoT issues and challenges are growing increasingly. Security and privacy issues are among the most important concerns in IoT applications, such as smart buildings. Remote cybersecurity attacks are the attacks which do not require physical access to the IoT networks, where the attacker can remotely access and communicate with the IoT devices through a wireless communication channel. Thus, remote cybersecurity attacks are a significant threat. Emerging applications in smart environments such as smart buildings require remote access for both users and resources. Since the user/building communication channel is insecure, a lightweight and secure authentication protocol is required. In this paper, we propose a new secure remote user mutual authentication protocol based on transitory identities and multi-factor authentication for IoT smart building environment. The protocol ensures that only legitimate users can authenticate with smart building controllers in an anonymous, unlinkable, and untraceable manner. The protocol also avoids clock synchronization problem and can resist quantum computing attacks. The security of the protocol is evaluated using two different methods: (1) informal analysis; (2) model check using the automated validation of internet security protocols and applications (AVISPA) toolkit. The communication overhead and computational cost of the proposed are analyzed. The security and performance analysis show that our protocol is secure and efficient.     

Hyper Elliptic Curve Based Certificateless Signcryption Scheme for Secure IIoT Communications

Industrial internet of things (IIoT) is the usage of internet of things (IoT) devices and applications for the purpose of sensing, processing and communicating real-time events in the industrial system to reduce the unnecessary operational cost and enhance manufacturing and other industrial-related processes to attain more profits. However, such IoT based smart industries need internet connectivity and interoperability which makes them susceptible to numerous cyber-attacks due to the scarcity of computational resources of IoT devices and communication over insecure wireless channels. Therefore, this necessitates the design of an efficient security mechanism for IIoT environment. In this paper, we propose a hyperelliptic curve cryptography (HECC) based IIoT Certificateless Signcryption (IIoT-CS) scheme, with the aim of improving security while lowering computational and communication overhead in IIoT environment. HECC with 80-bit smaller key and parameters sizes offers similar security as elliptic curve cryptography (ECC) with 160-bit long key and parameters sizes. We assessed the IIoT-CS scheme security by applying formal and informal security evaluation techniques. We used Real or Random (RoR) model and the widely used automated validation of internet security protocols and applications (AVISPA) simulation tool for formal security analysis and proved that the IIoT-CS scheme provides resistance to various attacks. Our proposed IIoT-CS scheme is relatively less expensive compared to the current state-of-the-art in terms of computational cost and communication overhead. Furthermore, the IIoT-CS scheme is 31.25% and 51.31% more efficient in computational cost and communication overhead, respectively, compared to the most recent protocol.     

Robust Cluster-Based Routing Protocol for IoT-Assisted Smart Devices in WSN

The Internet of Things (IoT) is gaining attention because of its broad applicability, especially by integrating smart devices for massive communication during sensing tasks. IoT-assisted Wireless Sensor Networks (WSN) are suitable for various applications like industrial monitoring, agriculture, and transportation. In this regard, routing is challenging to find an efficient path using smart devices for transmitting the packets towards big data repositories while ensuring efficient energy utilization. This paper presents the Robust Cluster Based Routing Protocol (RCBRP) to identify the routing paths where less energy is consumed to enhances the network lifespan. The scheme is presented in six phases to explore flow and communication. We propose the two algorithms: i) energy-efficient clustering and routing algorithm and ii) distance and energy consumption calculation algorithm. The scheme consumes less energy and balances the load by clustering the smart devices. Our work is validated through extensive simulation using Matlab. Results elucidate the dominance of the proposed scheme is compared to counterparts in terms of energy consumption, the number of packets received at BS and the number of active and dead nodes. In the future, we shall consider edge computing to analyze the performance of robust clustering.     

Lightweight Authentication Protocol Based on Physical Unclonable Function

In the emerging Industrial Internet of Things (IIoT), authentication problems have become an urgent issue for massive resource-constrained devices because traditional costly security mechanisms are not suitable for them. The security protocol designed for resource-constrained systems should not only be secure but also efficient in terms of usage of energy, storage, and processing. Although recently many lightweight schemes have been proposed, to the best of our knowledge, they are unable to address the problem of privacy preservation with the resistance of Denial of Service (DoS) attacks in a practical way. In this paper, we propose a lightweight authentication protocol based on the Physically Unclonable Function (PUF) to overcome the limitations of existing schemes. The protocol provides an ingenious authentication and synchronization mechanism to solve the contradictions amount forward secrecy, DoS attacks, and resource-constrained. The performance analysis and comparison show that the proposed scheme can better improve the authentication security and efficiency for resource-constrained systems in IIoT.     

Hybrid Grey Wolf and Dipper Throated Optimization in Network Intrusion Detection Systems

The Internet of Things (IoT) is a modern approach that enables connection with a wide variety of devices remotely. Due to the resource constraints and open nature of IoT nodes, the routing protocol for low power and lossy (RPL) networks may be vulnerable to several routing attacks. That’s why a network intrusion detection system (NIDS) is needed to guard against routing assaults on RPL-based IoT networks. The imbalance between the false and valid attacks in the training set degrades the performance of machine learning employed to detect network attacks. Therefore, we propose in this paper a novel approach to balance the dataset classes based on metaheuristic optimization applied to locality-sensitive hashing and synthetic minority oversampling technique (LSH-SMOTE). The proposed optimization approach is based on a new hybrid between the grey wolf and dipper throated optimization algorithms. To prove the effectiveness of the proposed approach, a set of experiments were conducted to evaluate the performance of NIDS for three cases, namely, detection without dataset balancing, detection with SMOTE balancing, and detection with the proposed optimized LSH-SOMTE balancing. Experimental results showed that the proposed approach outperforms the other approaches and could boost the detection accuracy. In addition, a statistical analysis is performed to study the significance and stability of the proposed approach. The conducted experiments include seven different types of attack cases in the RPL-NIDS17 dataset. Based on the proposed approach, the achieved accuracy is (98.1%), sensitivity is (97.8%), and specificity is (98.8%).     

An Access Control Scheme Using Heterogeneous Signcryption for IoT Environments

When the Wireless Sensor Network (WSN) is combined with the Internet of Things (IoT), it can be employed in a wide range of applications, such as agriculture, industry 4.0, health care, smart homes, among others. Accessing the big data generated by these applications in Cloud Servers (CSs), requires higher levels of authenticity and confidentiality during communication conducted through the Internet. Signcryption is one of the most promising approaches nowadays for overcoming such obstacles, due to its combined nature, i.e., signature and encryption. A number of researchers have developed schemes to address issues related to access control in the IoT literature, however, the majority of these schemes are based on homogeneous nature. This will be neither adequate nor practical for heterogeneous IoT environments. In addition, these schemes are based on bilinear pairing and elliptic curve cryptography, which further requires additional processing time and more communication overheads that is inappropriate for real-time communication. Consequently, this paper aims to solve the above-discussed issues, we proposed an access control scheme for IoT environments using heterogeneous signcryption scheme with the efficiency and security hardiness of hyperelliptic curve. Besides the security services such as replay attack prevention, confidentiality, integrity, unforgeability, non-repudiations, and forward secrecy, the proposed scheme has very low computational and communication costs, when it is compared to existing schemes. This is primarily because of hyperelliptic curve lighter nature of key and other parameters. The AVISPA tool is used to simulate the security requirements of our proposed scheme and the results were under two backbends (Constraint Logic-based Attack Searcher (CL-b-AtSER) and On-the-Fly Model Checker (ON-t-FL-MCR)) proved to be SAFE when the presented scheme is coded in HLPSL language. This scheme was proven to be capable of preventing a variety of attacks, including confidentiality, integrity, unforgeability, non-repudiation, forward secrecy, and replay attacks.

     

基于多跳双向认证的802.16Mesh网络SA管理机制

IEEE802.16-2004无线城域网(wireless-MAN)标准支持的多跳(Mesh)网络是一种树状网络和adhoc网络结合的新型网络.针对Mesh中使用的单跳单向认证SA(安全关联)管理机制安全和效率上的缺陷,提出了一种和次优修正路由结合的多跳双向认证SA管理机制.与单跳单向机制相比,该机制是前向安全的,对中间节点的攻击具有强安全性,同时减少了系统开销和传输时延.在按需路由建立前使用修正路由传递管理信息可减少服务流建立时延.安全性分析证明了多跳双向机制的安全性,性能比较说明了在效率上的优势.     

Multi-Attack Intrusion Detection System for Software-Defined Internet of Things Network

Currently, the Internet of Things (IoT) is revolutionizing communication technology by facilitating the sharing of information between different physical devices connected to a network. To improve control, customization, flexibility, and reduce network maintenance costs, a new Software-Defined Network (SDN) technology must be used in this infrastructure. Despite the various advantages of combining SDN and IoT, this environment is more vulnerable to various attacks due to the centralization of control. Most methods to ensure IoT security are designed to detect Distributed Denial-of-Service (DDoS) attacks, but they often lack mechanisms to mitigate their severity. This paper proposes a Multi-Attack Intrusion Detection System (MAIDS) for Software-Defined IoT Networks (SDN-IoT). The proposed scheme uses two machine-learning algorithms to improve detection efficiency and provide a mechanism to prevent false alarms. First, a comparative analysis of the most commonly used machine-learning algorithms to secure the SDN was performed on two datasets: the Network Security Laboratory Knowledge Discovery in Databases (NSL-KDD) and the Canadian Institute for Cybersecurity Intrusion Detection Systems (CICIDS2017), to select the most suitable algorithms for the proposed scheme and for securing SDN-IoT systems. The algorithms evaluated include Extreme Gradient Boosting (XGBoost), K-Nearest Neighbor (KNN), Random Forest (RF), Support Vector Machine (SVM), and Logistic Regression (LR). Second, an algorithm for selecting the best dataset for machine learning in Intrusion Detection Systems (IDS) was developed to enable effective comparison between the datasets used in the development of the security scheme. The results showed that XGBoost and RF are the best algorithms to ensure the security of SDN-IoT and to be applied in the proposed security system, with average accuracies of 99.88% and 99.89%, respectively. Furthermore, the proposed security scheme reduced the false alarm rate by 33.23%, which is a significant improvement over prevalent schemes. Finally, tests of the algorithm for dataset selection showed that the rates of false positives and false negatives were reduced when the XGBoost and RF algorithms were trained on the CICIDS2017 dataset, making it the best for IDS compared to the NSL-KDD dataset.     

Two-Stage High-Efficiency Encryption Key Update Scheme for LoRaWAN Based IoT Environment

Secure data communication is an essential requirement for an Internet of Things (IoT) system. Especially in Industrial Internet of Things (IIoT) and Internet of Medical Things (IoMT) systems, when important data are hacked, it may induce property loss or life hazard. Even though many IoT-related communication protocols are equipped with secure policies, they still have some security weaknesses in their IoT systems. LoRaWAN is one of the low power wide-area network protocols, and it adopts Advanced Encryption Standard (AES) to provide message integrity and confidentiality. However, LoRaWAN's encryption key update scheme can be further improved. In this paper, a Two-stage High-efficiency LoRaWAN encryption key Update Scheme (THUS for short) is proposed to update LoRaWAN's root keys and session keys in a secure and efficient way. The THUS consists of two stages, i.e., the Root Key Update (RKU) stage and the Session Key Update (SKU) stage, and with different update frequencies, the RKU and SKU provide higher security level than the normal LoRaWAN specification does. A modified AES encryption/decryption process is also utilized in the THUS for enhancing the security of the THUS. The security analyses demonstrate that the THUS not only protects important parameter during key update stages, but also satisfies confidentiality, integrity, and mutual authentication. Moreover, The THUS can further resist replay and eavesdropping attacks.     

Continuous Mobile User Authentication Using a Hybrid CNN-Bi-LSTM Approach

Internet of Things (IoT) devices incorporate a large amount of data in several fields, including those of medicine, business, and engineering. User authentication is paramount in the IoT era to assure connected devices’ security. However, traditional authentication methods and conventional biometrics-based authentication approaches such as face recognition, fingerprints, and password are vulnerable to various attacks, including smudge attacks, heat attacks, and shoulder surfing attacks. Behavioral biometrics is introduced by the powerful sensing capabilities of IoT devices such as smart wearables and smartphones, enabling continuous authentication. Artificial Intelligence (AI)-based approaches introduce a bright future in refining large amounts of homogeneous biometric data to provide innovative user authentication solutions. This paper presents a new continuous passive authentication approach capable of learning the signatures of IoT users utilizing smartphone sensors such as a gyroscope, magnetometer, and accelerometer to recognize users by their physical activities. This approach integrates the convolutional neural network (CNN) and recurrent neural network (RNN) models to learn signatures of human activities from different users. A series of experiments are conducted using the MotionSense dataset to validate the effectiveness of the proposed method. Our technique offers a competitive verification accuracy equal to 98.4%. We compared the proposed method with several conventional machine learning and CNN models and found that our proposed model achieves higher identification accuracy than the recently developed verification systems. The high accuracy achieved by the proposed method proves its effectiveness in recognizing IoT users passively through their physical activity patterns.     

SIMAD: Secure Intelligent Method for IoT-Fog Environments Attacks Detection

The Internet of Thing IoT paradigm has emerged in numerous domains and it has achieved an exponential progress. Nevertheless, alongside this advancement, IoT networks are facing an ever-increasing rate of security risks because of the continuous and rapid changes in network environments. In order to overcome these security challenges, the fog system has delivered a powerful environment that provides additional resources for a more improved data security. However, because of the emerging of various breaches, several attacks are ceaselessly emerging in IoT and Fog environment. Consequently, the new emerging applications in IoT-Fog environment still require novel, distributed, and intelligent security models, controls, and decisions. In addition, the ever-evolving hacking techniques and methods and the expanded risks surfaces have demonstrated the importance of attacks detection systems. This proves that even advanced solutions face difficulties in discovering and recognizing these small variations of attacks. In fact, to address the above problems, Artificial Intelligence (AI) methods could be applied on the millions of terabytes of collected information to enhance and optimize the processes of IoT and fog systems. In this respect, this research is designed to adopt a new security scheme supported by an advanced machine learning algorithm to ensure an intelligent distributed attacks detection and a monitoring process that detects malicious attacks and updates threats signature databases in IoT-Fog environments. We evaluated the performance of our distributed approach with the application of certain machine learning mechanisms. The experiments show that the proposed scheme, applied with the Random Forest (RF) is more efficient and provides better accuracy (99.50%), better scalability, and lower false alert rates. In this regard, the distribution character of our method brings about faster detection and better learning.     

A Dual-Chaining Watermark Scheme for Data Integrity Protection in Internet of Things

Chaining watermark is an effective way to verify the integrity of streaming data in wireless network environment, especially in resource-constrained sensor networks, such as the perception layer of Internet of Things applications. However, in all existing single chaining watermark schemes, how to ensure the synchronization between the data sender and the receiver is still an unsolved problem. Once the synchronization points are attacked by the adversary, existing data integrity authentication schemes are difficult to work properly, and the false negative rate might be up to 50 percent. And the additional fixed group delimiters not only increase the data size, but are also easily detected by adversaries. In this paper, we propose an effective dual-chaining watermark scheme, called DCW, for data integrity protection in smart campus IoT applications. The proposed DCW scheme has the following three characteristics: (1) In order to authenticate the integrity of the data, fragile watermarks are generated and embedded into the data in a chaining way using dynamic grouping; (2) Instead of additional fixed group delimiters, chained watermark delimiters are proposed to synchronize the both transmission sides in case of the synchronization points are tampered; (3) To achieve lossless integrity authentication, a reversible watermarking technique is applied. The experimental results and security analysis can prove that the proposed DCW scheme is able to effectively authenticate the integrity of the data with free distortion at low cost in our smart meteorological Internet of Things system.     

An Efficient Internet Traffic Classification System Using Deep Learning for IoT

Internet of Things (IoT) defines a network of devices connected to the internet and sharing a massive amount of data between each other and a central location. These IoT devices are connected to a network therefore prone to attacks. Various management tasks and network operations such as security, intrusion detection, Quality-of-Service provisioning, performance monitoring, resource provisioning, and traffic engineering require traffic classification. Due to the ineffectiveness of traditional classification schemes, such as port-based and payload-based methods, researchers proposed machine learning-based traffic classification systems based on shallow neural networks. Furthermore, machine learning-based models incline to misclassify internet traffic due to improper feature selection. In this research, an efficient multilayer deep learning based classification system is presented to overcome these challenges that can classify internet traffic. To examine the performance of the proposed technique, Moore-dataset is used for training the classifier. The proposed scheme takes the pre-processed data and extracts the flow features using a deep neural network (DNN). In particular, the maximum entropy classifier is used to classify the internet traffic. The experimental results show that the proposed hybrid deep learning algorithm is effective and achieved high accuracy for internet traffic classification, i.e., 99.23%. Furthermore, the proposed algorithm achieved the highest accuracy compared to the support vector machine (SVM) based classification technique and k-nearest neighbours (KNNs) based classification technique.     

LOA-RPL: Novel Energy-Efficient Routing Protocol for the Internet of Things Using Lion Optimization Algorithm to Maximize Network Lifetime

Energy conservation is a significant task in the Internet of Things (IoT) because IoT involves highly resource-constrained devices. Clustering is an effective technique for saving energy by reducing duplicate data. In a clustering protocol, the selection of a cluster head (CH) plays a key role in prolonging the lifetime of a network. However, most cluster-based protocols, including routing protocols for low-power and lossy networks (RPLs), have used fuzzy logic and probabilistic approaches to select the CH node. Consequently, early battery depletion is produced near the sink. To overcome this issue, a lion optimization algorithm (LOA) for selecting CH in RPL is proposed in this study. LOA-RPL comprises three processes: cluster formation, CH selection, and route establishment. A cluster is formed using the Euclidean distance. CH selection is performed using LOA. Route establishment is implemented using residual energy information. An extensive simulation is conducted in the network simulator ns-3 on various parameters, such as network lifetime, power consumption, packet delivery ratio (PDR), and throughput. The performance of LOA-RPL is also compared with those of RPL, fuzzy rule-based energy-efficient clustering and immune-inspired routing (FEEC-IIR), and the routing scheme for IoT that uses shuffled frog-leaping optimization algorithm (RISA-RPL). The performance evaluation metrics used in this study are network lifetime, power consumption, PDR, and throughput. The proposed LOA-RPL increases network lifetime by 20% and PDR by 5%–10% compared with RPL, FEEC-IIR, and RISA-RPL. LOA-RPL is also highly energy-efficient compared with other similar routing protocols.     

DHT系统的安全性优化方法研究

对分布式哈希表(DHT)系统的安全脆弱性问题进行了研究,提出了多种安全性优化策略,并给出了一个原型系统。进行了真实网络实验,实验数据表明,现有DHT网络易受索引毒害和路由污染攻击,产生的错误查询结果甚至会引发更大规模的网络安全事件。通过改进一个个DHT系统的节点ID生成机制、路由表更新机制和搜索路径选择机制,从系统运行的各个阶段提升其安全场,抵御攻击者共谋。基于上述方法设计的原型系统在保证平均查询跳数增加不到1跳的情况下,在共谋攻击节点占比60%的网络中,将系统查询成功率保持在65%以上,其方法适用于各种分布式哈希表结构,具有重要的实际应用前景。     

Design of a robust and secure digital signature scheme for image authentication over wireless channels

The introduction of 3G wireless communication systems, together with the invasive distribution of digital images and the growing concern on their originality triggers an emergent need of authenticating images received by unreliable channels, such as public Internet and wireless networks. To meet this need, a content-based image authentication scheme that is suitable for an insecure network and robust to transmission errors is proposed. The proposed scheme exploits the scalability of a structural digital signature in order to achieve a good trade off between security and image transfer for networked image applications. In this scheme, multi-scale features are used to make digital signatures robust to image degradations and keydependent parametric wavelet filters are employed to improve the security against forgery attacks. This scheme is also able to distinguish tampering areas in the attacked image. Experimental results show the robustness and validity of the proposed scheme.     

Anomaly Detection for Internet of Things Cyberattacks

The Internet of Things (IoT) has been deployed in diverse critical sectors with the aim of improving quality of service and facilitating human lives. The IoT revolution has redefined digital services in different domains by improving efficiency, productivity, and cost-effectiveness. Many service providers have adapted IoT systems or plan to integrate them as integral parts of their systems’ operation; however, IoT security issues remain a significant challenge. To minimize the risk of cyberattacks on IoT networks, anomaly detection based on machine learning can be an effective security solution to overcome a wide range of IoT cyberattacks. Although various detection techniques have been proposed in the literature, existing detection methods address limited cyberattacks and utilize outdated datasets for evaluations. In this paper, we propose an intelligent, effective, and lightweight detection approach to detect several IoT attacks. Our proposed model includes a collaborative feature selection method that selects the best distinctive features and eliminates unnecessary features to build an effective and efficient detection model. In the detection phase, we also proposed an ensemble of learning techniques to improve classification for predicting several different types of IoT attacks. The experimental results show that our proposed method can effectively and efficiently predict several IoT attacks with a higher accuracy rate of 99.984%, a precision rate of 99.982%, a recall rate of 99.984%, and an F1-score of 99.983%.     

ESAP: Efficient and secure authentication protocol for roaming user in mobile communication networks

The Global System for Mobile communication (GSM) network is proposed to mitigate the security problems and vulnerabilities observed in the mobile telecommunication system. However, the GSM network is vulnerable to different kinds of attacks such as redirection attack, impersonation attack and Man in-the Middle (MiTM) attack. The possibility of these attacks makes the wireless mobile system vulnerable to fraudulent access and eavesdropping. Different authentication protocols of GSM were proposed to overcome the drawbacks but many of them lead to network signalling overload and increases the call set-up time. In this paper, an efficient and secure authentication and key agreement protocol (ESAP-AKA) is proposed to overcome the flaws of existing authentication protocol for roaming users in the GSM network. The formal verification of the proposed protocol is presented by BAN logic and the security analysis is shown using the AVISPA tool. The security analysis shows that the proposed protocol avoids the different possible attacks on the communication network. The performance analysis based on the fluid flow mobility model shows that the proposed protocol reduces the communication overhead of the network by reducing a number of messages. On an average, the protocol reduces 60% of network signalling congestion overhead as compared with other existing GSM-AKA protocols. Moreover, the protocol not only removes the drawbacks of existing protocols but also accomplishes the needs of roaming users.