Solving constrained optimization problems with a hybrid particle swarm optimization algorithm

This article presents a particle swarm optimization algorithm for solving general constrained optimization problems. The proposed approach introduces different methods to update the particle's information, as well as the use of a double population and a special shake mechanism designed to avoid premature convergence. It also incorporates a simple constraint-handling technique. Twenty-four constrained optimization problems commonly adopted in the evolutionary optimization literature, as well as some structural optimization problems are adopted to validate the proposed approach. The results obtained by the proposed approach are compared with respect to those generated by algorithms representative of the state of the art in the area.     

Hybridizing evolutionary strategies with continuation methods for solving multi-objective problems

Two techniques for the numerical treatment of multi-objective optimization problems—a continuation method and a particle swarm optimizer—are combined in order to unite their particular advantages. Continuation methods can be applied very efficiently to perform the search along the Pareto set, even for high-dimensional models, but are of local nature. In contrast, many multi-objective particle swarm optimizers tend to have slow convergence, but instead accomplish the ‘global task’ well. An algorithm which combines these two techniques is proposed, some convergence results for continuous models are provided, possible realizations are discussed, and finally some numerical results are presented indicating the strength of this novel approach.     

矿物质粉体对砂浆及混凝土Cl-渗透性的影响

研究了不同水胶比、不同矿物质粉体掺量的砂浆和混凝土，经标准养护至56天、90天时的导电量。在相同水胶比和相同矿物质粉体掺量下，混凝土的导电量远低于砂浆的导电量。含矿物质粉体的砂浆及混凝土的导电量均低于基准砂浆及混凝土的导电量。导电量随水胶比的降低而降低，也随龄期的增长而降低。     

A comparison of swarm intelligence algorithms for structural engineering optimization

This paper compares the performance of three swarm intelligence algorithms for the optimization of hard engineering problems. The algorithms tested were bacterial foraging optimization (BFO), particle swarm optimization (PSO), and artificial bee colony (ABC). Besides the regular BFO, two other variants reported in the literature were also included in the study: adaptive BFO and swarming BFO. Both PSO and ABC were tested using the regular algorithm and variants that include explosion (mass extinction). Three optimization problems of structural engineering were used: minimization of the cost of a welded beam, minimization of the construction cost of a pressure vessel, and minimization of the total weight of a 10‐bar plane truss. All problems are strongly constrained. The algorithms were evaluated using two criteria: quality of solutions and the number of function evaluations. The results show that PSO presented the best balance between these two criteria. For the optimization problems approached in this paper, we can also conclude that the explosion procedure resulted in no significant improvements. Copyright © 2012 John Wiley & Sons, Ltd.     

求解约束优化问题的改进布谷鸟搜索算法

为了提高约束优化问题的求解精度和收敛速度,提出求解约束优化问题的改进布谷鸟搜索算法。首先分析了基本布谷鸟搜索算法全局搜索和局部搜索过程中的不足,对其中全局搜索和局部搜索迭代公式进行重新定义,然后以一定概率在最优解附近进行搜索。对12个标准约束优化问题和4个工程约束优化问题进行测试并与多种算法进行对比,实验结果和统计分析表明所提算法在求解约束优化问题上具有较强的优越性。     

应用蜜蜂繁殖进化型粒子群算法求解车辆路径问题

为了提高粒子群算法求解车辆路径问题时收敛速度和全局搜索能力,将蜜蜂繁殖进化机制与粒子群算法相结合,应用到CVRP问题的求解。该算法中,最优的个体作为蜂王与通过选择机制选择的雄蜂以随机概率进行交叉,增强了最优个体信息的应用能力;同时,随机产生一部分雄蜂种群,并将其与蜂王交叉增加了算法的多样性。实例分析表明该算法具有较好的全局搜索能力,验证了该算法的可行性。     

隔热技术的优化设计方法及其工程验证

本文以大型高温工业炉为实例,对炉体结构传热的物理模型和计算方法进行了深入研究．据此,提出了一种高温工业炉用新型隔热技术和材料热设计的优化方法．经工程实施验证,设计值与实测值相吻合,并取得了十分明显的节能效益．     

Particle swarm optimization for problems with variable number of dimensions

Some real-life optimization problems, apart from dependence on the combination of state variables, also show dependence on the complexity of the model describing the problem. Changing model complexity implies changing the number of decision space dimensions.

A new method called Particle Swarm Optimization for Variable Number of Dimensions is developed here. The well-known particle swarm optimization procedure is modified to handle spaces with a variable number of dimensions within a single run. Some well-known benchmark problems are modified to depend on the number of dimensions. Novel performance metrics are defined in the article to evaluate convergence properties of the method. Some recommendations for setting the optimization are made according to results of the method on the proposed benchmark test suite. The method is compared with conventional swarm strategies able to solve problems with variable number of dimensions.     

A human‐like numerical technique for design of engineering systems

Because of the necessity for considering various creative and engineering design criteria, optimal design of an engineering system results in a highly‐constrained multi‐objective optimization problem. Major numerical approaches to such optimal design are to force the problem into a single objective function by introducing unjustifiable additional parameters and solve it using a single‐objective optimization method. Due to its difference from human design in process, the resulting design often becomes completely different from that by a human designer. This paper presents a novel numerical design approach, which resembles the human design process. Similar to the human design process, the approach consists of two steps: (1) search for the solution space of the highly‐constrained multi‐objective optimization problem and (2) derivation of a final design solution from the solution space. Multi‐objective gradient‐based method with Lagrangian multipliers (MOGM‐LM) and centre‐of‐gravity method (CoGM) are further proposed as numerical methods for each step. The proposed approach was first applied to problems with test functions where the exact solutions are known, and results demonstrate that the proposed approach can find robust solutions, which cannot be found by conventional numerical design approaches. The approach was then applied to two practical design problems. Successful design in both the examples concludes that the proposed approach can be used for various design problems that involve both the creative and engineering design criteria. Copyright © 2005 John Wiley & Sons, Ltd.