Hydrodynamics performance and tray efficiency analysis of the novel vertical spray packing tray

Column setup has been widely utilized in the petroleum and chemistry industries. However, with the fast progress of industries and the increasingly serious energy shortage, designing a new column setup with better performance and higher capacity becomes more urgent. In order to improve column's capacity and expand operating condition, a new type of column tray named novel vertical spray packing (NVSP) tray was designed and experimented. The performances of the novel tray, including pressure drop, weeping, entrainment and tray efficiency, were tested in a plexiglass column. In addition, performances of the novel tray were compared with that of the sieve tray and the Glitsch V1 valve tray. Based on the experiment data, the mathematical correlations of pressure drop, weeping and entrainment for the novel tray were established by regression analysis method. A fundamental model of dry pressure drop of the novel tray was promoted at the form of sum mode. The results indicate that the novel tray has wider operating condition and better performance.     

Hydrodynamics and mass transfer in a novel multi-airlifting membrane bioreactor

A novel multiple-airlifting membrane bioreactor is built with four sintered stainless steel tubular filters as the risers and downcomers. This work investigates the hydrodynamics including gas holdup, liquid velocity, liquid circulation and mixing times by aerating different number of risers (one to three) at superficial gas velocities of 0.02-0.07 m/s The mass transfer phenomena, including oxygen mass transfer (k_La) and effective molecular diffusivity of lactic and acetic acids through the walls of tubular filters, are also investigated. It is found that gas holdup in individual risers increases linearly with the superficial gas velocity, and performs independently under multiple-airlifting conditions. The vessel-based gas holdup and liquid velocity in downcomer(s) increase with aeration rate of individual risers as well as the number of risers. The liquid velocity in downcomers reaches an upper limit (about 0.6 m/s), because of flow resistance or energy loss of liquid circulation. The oxygen mass transfer coefficient (k_La) is primarily affected by gas holdup and the number of risers, and to some extent influenced by liquid velocity. The novel airlifter configuration results in good liquid mixing in the bioreactor that quickly reaches new steady state in response to a sudden pH change from acid addition.     

导向筛板-导向浮阀塔板流体力学及传质性能

设计了一种高分离效率、高操作弹性的新型导向筛板-导向浮阀塔板(FGS-VT)。并在直径为600 mm的有机玻璃塔内,以空气-水-氧气为物系,测定了3种结构不同的FGS-VT的流体力学性能和传质性能,包括干板压降、湿板压降、漏液量、雾沫夹带率和塔板效率等。通过与筛孔、导向孔大小和排布方式相当的导向筛板在相同条件下的实验数据对比得出结论,带有14个浮阀的导向筛板-导向浮阀(FGS-VT-14-8)具有更低的干板压降和湿板压降,更大的操作弹性(更低的漏液和雾沫夹带)和更高的塔板效率。     

Hydrodynamics and mass transfer in gas-liquid flow through static mixers

The objective of this study was to characterize the two-phase flow hydrodynamic behaviour and mass transfer in a static mixer in a horizontal pipe. Different arrangements of elements of the static mixer were tested and their performances compared. The pressure drop, bubble diameters and mass transfer coefficient were measured. The influence of operating conditions was also studied. A different correlations are proposed and compared with other correlations found in the literature.     

Hydrodynamics and volumetric gas-liquid mass transfer coefficient of a stirred vessel equipped with a gas-inducing impeller

Hydrodynamic and mass transfer characteristics of a gas-liquid stirred tank provided with a radial gas-inducing turbine were studied. The effect of the rotation speed and the liquid submergence on global hydrodynamic and mass transfer parameters such as the critical impeller speed, the induced gas flow rate, the gas holdup, the power consumption and the volumetric gas-liquid mass transfer coefficient were investigated. The experiments are mainly conducted with air-water system. In the case of critical impeller speed determination, two liquid viscosities have been used. The volumetric gas-liquid mass transfer coefficient k_La has been obtained by two different techniques. The gas holdup, the induced gas rate and the volumetric gas-liquid mass transfer coefficient are increasing functions with the rotation speed and decreasing ones with the liquid submergence. The effects of these operating parameters on the measured global parameters have been taken into account by introducing the dimensionless modified Froude number and correlations have been proposed for this type of impeller.     

Hydrodynamics and mass transfer in a packed column: Case of toluene absorption with a viscous absorbent

Volatile organic compounds (VOCs) cause nuisance to humans and the environment. Recent legislation encourages industrialists to set up equipment for treating their VOC-loaded gaseous effluents. This piece of research studies the absorption process, using a viscous organic absorbent (di(2-ethylhexyl) adipate=DEHA) to treat a toluene-loaded vent gas, in terms of hydrodynamics and mass transfer. It is shown that DEHA does not lead to an excessive pressure drop. Correlations predicting hydrodynamic parameters from previous literature are summarised and tested against experimental results. It is shown that acceptable prediction accuracy can be achieved for counter-current pressure drop and liquid hold-up. Treatment efficiency for the toluene-loaded vent gas is shown to be very good. Calculation of mass transfer constants (k_La) enables to test literature correlations against the experimental results. The mass transfer is supposed to be limited by the liquid-side resistance. Our experimental results showed that the k_La of the system depends on the liquid velocity but also on the gas velocity. This behaviour has also been observed by the few authors who have used viscous fluids in their experiments, but is contrary to all the authors who have work on low-viscosity fluids. It is therefore clear that the influence of viscosity on the phenomenon is considerable. Not one current correlation is currently accurate in the case of a viscous absorbent.     

Hydrodynamics and mass transfer in bubble column: Influence of liquid phase surface tension

According to literature, few experiments are performed in organic solvents which are mostly used in commercial gas-liquid reactors. However, it is commonly accepted that data obtained in aqueous solution allow to predict the surface tension effects, and to model the behaviour of organic solvents. In this work, we examine the validity of this approximation.In this objective, the flows observed in two pure media having similar viscosity but different surface tension—respectively, water (reference) and cyclohexane (solvent)—are successively compared at two scales: in a bubble column and in bubble plumes.In bubble plumes, as expected, the mean bubble size is smaller in the medium having the smallest surface tension (cyclohexane), but for this medium the destabilisation of flow is observed to occur at smaller gas velocity, due to break-up and coalescence phenomena. In bubble column, these phenomena induce the bubbling transition regime at lower gas velocity, whatever the operating conditions for liquid phase: batch or continuous. Consequently, when the two media are used at similar gas superficial velocity, but in different hydrodynamic regimes, greater gas hold-up and smaller bubble diameter can be observed in water; the interfacial area is then not always higher in cyclohexane.This result differs from the behaviour observed in the literature for aqueous solutions. The analysis of bubble plumes in aqueous solutions of butanol shows that this difference is due to a fundamental difference in coalescent behaviour between pure solvents and aqueous mixtures: the surface tension effect is less important in pure liquid than in aqueous solutions, because of the specific behaviour of surfactants.It is then still difficult to predict a priori the bubbling regime or the flow characteristics for a given medium, and all the more to choose an appropriate liquid as a model for industrial solvents.     

Hydrodynamics and mass transfer in carbon-nanofiber/graphite-felt composite under two phase flow conditions

A carbon nanofiber (CNF)/graphite felt composite was synthesized by growing CNFs on the surface of graphite fibers and was used as the packing of a fixed bed reactor under two phase flow conditions. The pressure drop, axial dispersion and mass transfer in the liquid were studied by experiment and by piston dispersion exchange (PDE) model. It was shown that the pressure drop and total liquid up could be predicted by the slit model in an acceptable accuracy. The axial dispersion in the liquid phase in the composite and the mass transfer between the dynamic and static liquid are higher than in the packed bed of solid particles owing to the porous and fluffy CNF layer on the carbon felt fiber.     

新型垂直板规整填料流体力学及传质性能

采用氧解吸实验,在直径190 mm的有机玻璃塔内,液相喷淋密度10～38 m³·m^-2·h^-1,F因子0.2～3.2 m·s^-1·（kg·m^-3）^0.5的实验条件下测定了一种新型垂直板规整填料的流体力学及传质性能。实验结果表明：垂直板填料的操作压降及传质性能均显著优于商业波纹填料。通过与几种经改进的250型波纹填料相比发现,两者泛点F因子整体上相当;在较高液体喷淋密度下,垂直板填料传质性能及压降均高于改进250型波纹填料;在低喷淋密度下,垂直板填料可实现压降低于改进250型波纹填料,而两者传质性能相当。此外,对填料结构改进对其性能的影响进行了单因素考察。     

Rise velocities and gas-liquid mass transfer of bubbles in organic solutions

Bubble size, shape, rise velocity and liquid side mass transfer coefficient have been experimentally determined for bubbles rising in organic systems, consisting of single or mutually soluble components, namely: alkanes (n-dodecane, n-hexadecane), alcohols (ethanol, 1-butanol, 1-octanol) and mixtures thereof. For pure solvents (alkanes and alcohols alike), it was found that the bubbles are non-spherical, and that both the rise velocity and the mass transfer coefficient are close to those expected for bubbles with a mobile surface.For alkane-alcohol solutions, on the other hand, the bubbles become almost spherical, and their rise velocity and mass transfer coefficient decrease, taking values intermediate between those of rigid bubbles and bubbles with a mobile surface. Trace concentrations of either alkane in alcohol or alcohol in alkane are enough for this effect to be observed. The bubbles, however, never become completely rigid in the whole range of concentrations between pure alkane and pure alcohol.Use of Higbie's equation with experimental value of slip velocity to calculate the mass transfer coefficient, k_L, (system n-dodecane/1-octanol) yields somewhat high predictions of k_L, but follows the trend of experimental k_L with concentration for most of the concentration range. However, for very small concentrations of either component, Higbie's equation gives completely wrong results, both in magnitude and in trend. The reason for this behaviour is unknown.     

Hydrodynamic and mass transfer performance of a new aero-ejector with its application to VOC abatement

The aero-ejector, an in-house developed gas-liquid contactor, ensures an improved gas-liquid contact, favorable to a high mass transfer in a small volume: its transfer capacity enables the elimination of 90% of pollutants from gaseous effluents in a single treatment. Through its characteristics, its use as a transfer device into a treatment process has distinct advantages. However, such an application needs modifications to make the contactor suitable for use in an industrial context (efficiency, compactness and low pressure drop). The aim of this research is to improve the contactor geometry in order to enhance its performances. Modifications have resulted in an energy improvement since an inlet gaseous pressure of was reached for a Q_G/Q_L ratio in excess of 10 and with a small loss of transfer efficiency. The study of the effect of operating parameters has identified a sizing criterion, the “useful volume”. This can be used to determine an optimal configuration for the gas-liquid contactor taking into account constraints such as pollutant solubility, pressure drop or compactness.     

Hydrodynamics of spray column for enzymatic reactions of oil

The hydrodynamic characteristics of a spray column for oil–water system have been investigated in the present work in a column of 5 cm inner diameter and 250 cm height, operated in a semi batch manner. The effect of dispersed phase flow rate and nozzle diameter on different hydrodynamic parameters such as drop diameter, dispersed phase hold up, terminal rise velocity and jetting velocity has been studied. It has been observed that the drop diameter, dispersed phase hold up, terminal rise velocity and jetting velocity increase with an increase in nozzle diameter. Also, dispersed phase hold up increases with dispersed phase velocity whereas terminal rise velocity and drop diameter show a marginal dependency. Correlations have been developed, using nonlinear regression, for the prediction of drop diameter, dispersed phase hold up, terminal rise velocity and jetting velocity.     

塔板最新研究和展望

综述了板式塔板研究的最新进展及其相关的工业化情况,同时根据塔板结构简图介绍了各个塔板的原理和特点,对其传质和流体力学性能进行了简要的分析,讨论了塔板的发展前景。     

Hydrodynamics and mass transfer study of aliphatic alcohols in airlift reactors

Gas holdup and gas–liquid mass transfer coefficient were considered in an external airlift reactor. Air was sparged through some aliphatic alcohols (methanol, ethanol, n-propanol, and n-butanol) with different concentrations (0–1%, v/v). It was observed that gas holdup and mass transfer coefficient increased with increasing the number of carbons in alcohols. Furthermore, an increment in alcohols concentration increased gas holdup and mass transfer coefficient. The same behavior was observed in external and internal loop airlift reactors although gas holdup and mass transfer coefficient values were less than those of internal airlift reactor. According to the experiments, two correlations for gas holdup and mass transfer were developed.     

新型固定阀塔板的流体力学和传质性能研究

提供了一种阀盖两侧具有向下弯曲折边的新型固定阀。在内径为500mm的有机玻璃塔内,以空气水为物系,研究了其流体力学性能;在内径为300mm的不锈钢塔内,以乙醇水为物系,常压全回流情况下,研究了其传质性能。研究结果表明:新型固定阀塔板的板压降略高于筛孔塔板,比F1 浮阀塔板小得多,雾沫夹带量小,雾沫夹带液泛点阀(筛)孔动能因子均比筛孔塔板、F1 浮阀塔板大,漏液量较小,漏液点阀(筛)孔动能因子比筛孔塔板低,比F1 浮阀塔板高,传质效率与F1 浮阀塔板相当。     

Comparison of Hydrodynamics and Mass Transfer in Airlift and Bubble Column Reactors Using CFD

Computational Fluid Dynamics (CFD) is used to compare the hydrodynamics and mass transfer of an internal airlift reactor with that of a bubble column reactor, operating with an air/water system in the homogeneous bubble flow regime. The liquid circulation velocities are significantly higher in the airlift configuration than in bubble columns, leading to significantly lower gas holdups. Within the riser of the airlift, the gas and liquid phases are virtually in plug flow, whereas in bubble columns the gas and liquid phases follow parabolic velocity distributions. When compared at the same superficial gas velocity, the volumetric mass transfer coefficient, k_La, for an airlift is significantly lower than that for a bubble column. However, when the results are compared at the same values of gas holdup, the values of k_La are practically identical.     

Performance and applications of flow-guided sieve trays for distillation of highly viscous mixtures

With a particular focus on the distillation of highly viscous or self-polymerized mixtures, this study reports the hydrodynamic and mass transfer performance of two flow-guided sieve trays, including their pressure drop, entrainment, weeping and tray efficiency, obtained experimentally with an air-water/oxygen system in a Φ600 mm plexiglass column. The results show that the 8 mm hole flow-guided sieve tray tested shows better characteristics than the 7 mm flow-guided hole tray in terms of pressure drop and mass transfer. Then we present practical industrial examples of applications of the flow guided trays for distillation of viscous mixtures, i.e., the separation of vinyl acetate (VAC) from a polyvinyl acetate (PVAC) polymer solution with dynamic viscosity μ=50,000 mPas, the separation of highly unsaturated C5 mixtures by extractive distillation, and the distillation of thick, condensed and highly viscous fermentation mixtures made from fermented mash. It is demonstrated that flow-guided sieve trays with relatively large holes are an excellent candidate for distillation of mixtures with suspended solids, or concentrated/self-polymerized polymer solutions.     

Effect of bubble contamination on rise velocity and mass transfer

An apparatus where individual bubbles are kept stationary in a downward liquid flow was adapted to simultaneously (i) follow mass transfer to/from a single bubble as it inevitably gets contaminated; (ii) follow its shape; and (iii) periodically measure its terminal velocity. This apparatus allows bubbles to be monitored for much longer periods of time than does the monitoring of rising bubbles. Thus, the effect of trace contaminants on bubbles of low solubility gases, like air, may be studied.Experiments were done with air bubbles of 1-5 mm initial equivalent diameter in a water stream. The partial pressure of air in the liquid could be manipulated, allowing bubbles to be either dissolving or kept at an approximately constant diameter.Both drag coefficient and gas-liquid mass transfer results were interpreted in terms of bubble contamination kinetics using a simplified stagnant cap model. Drag coefficient was calculated from stagnant cap size using an adaptation of Sadhal and Johnson's model (J. Fluid Mech. 126 (1983) 237).Gas-liquid mass transfer modelling assumed two mass transfer coefficients, one for the clean front of the bubble, the other for the stagnant cap. Adjusted values of these coefficients are consistent with theoretical predictions from Higbie's and Frössling's equations, respectively.     

Influence of Pressure on the Hydrodynamics and Mass Transfer Parameters of an Agitated Bubble Reactor

The present study deals with the pressure effects on the hydrodynamic flow and mass transfer within an agitated bubble reactor operated at pressures between 10⁵ and 100 × 10⁵ Pa. In order to clarify the flow behavior within the reactor, liquid phase residence time distributions (RTD) for different operating pressures and gas velocities ranging between 0.005 m/s and 0.03 m/s are determined experimentally by the tracer method for which a KCl solution is used as a tracer. The result of the analysis of the liquid‐phase RTD curves justifies the tank‐in‐series model flow for the operating pressure range. Good agreement is obtained between theoretical and experimental results assuming the reactor is operating as perfectly mixed. Two parameters characterizing the mass transfer are identified and investigated in respect to pressure: the gas‐liquid interfacial area and volumetric liquid‐side mass transfer coefficient. The chemical absorption method is used. For a given gas mass flow rate, the interfacial area as well as the volumetric liquid mass transfer coefficient decrease with increasing operating pressure. However, for a given pressure, a and k_La increase with increasing gas mass flow rates. The mass transfer coefficient k_L is independent of pressure.     

Oxygen mass transfer and hydrodynamics in a multi-phase airlift bioscrubber system

The addition of select polymer beads to stirred tank bioscrubber systems has been shown to greatly enhance the removal and treatment of toxic VOCs via the capture and sequestration of poorly soluble compounds such as benzene, and the release of these materials, based on equilibrium partitioning, to microorganisms in the aqueous phase. In this study, oxygen volumetric mass transfer coefficients were determined for an 11 L airlift vessel containing tap water alone, tap water with Nylon 6,6 polymer beads (10% v/v), and tap water with silicone rubber beads (10% v/v), over various inlet gas flow rates, with the aim of initially characterizing a low-energy pneumatically agitated reactor (concentric tube airlift). In addition, oxygen transfer rates into the airlift with and without polymers with high oxygen affinity were determined. To further characterize this reactor system, a residence time distribution analysis was completed to determine hydrodynamic parameters including the Peclet number (Pe), circulation time (t_c) and mixing time (t_m) over various gas flow rates for the airlift containing tap water with and without silicone rubber. It was found that the addition of silicone rubber beads, which has a high affinity for oxygen, reduced the measured volumetric mass transfer coefficient relative to a system without polymers due to oxygen sorption during the dynamic period of testing, but increased the overall amount of oxygen that was transferred to the system during the dynamic period. The addition of Nylon 6,6, which has very low oxygen uptake, allowed for estimation of the physical effect of solids addition on gas-liquid mass transfer and it was found that there was no effect on the measured volumetric mass transfer coefficient relative to a system without polymers. However, hydrodynamic parameters revealed that the addition of silicone rubber into an airlift vessel improves liquid phase mixing. This investigation has defined key operational features of a low-energy three-phase airlift bioscrubber system for the treatment of toxic VOC substrates.