Pickering emulsion polymerization: Preparation of polystyrene/nano-SiO2 composite microspheres with core-shell structure

Polystyrene/nano-SiO₂ composite microspheres (PS/nano-SiO₂) with core-shell structure were successfully synthesized in a Pickering emulsion route using nano-SiO₂ particles as stabilizers, which were organically modified by methacryloxypropyltrimethoxysilane (MPTMS) which containing a reactive CC bond. The products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), fourier transformation infrared spectrum (FTIR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). In addition, bare PS spheres could also be obtained by changing synthetic conditions. It was found that the morphology of the resulting products depends on particle concentration, particle wettability and pH value of particle dispersion. A possible mechanism for the formation of the composites with different morphologies is proposed.     

Oxidization of carbon nanotubes through hydroxyl radical induced by pulsed O2 plasma and its application for O2 reduction in electro-Fenton

The oxidation of carbon nanotubes (CNTs) by hydroxyl radical produced by pulsed O₂ plasma in a gas-liquid hybrid discharge reactor was conducted with the goal of enhancing their solubility and improving the yield of H₂O₂ in electro-Fenton. Data from the characterization experiments showed that oxygen bearing groups (COH, COO, COOH, CO) were formed on the surface of CNTs. The possible mechanism indicated that introduction of oxygen bearing groups onto CNTs could be attributed to the attacks by hydroxyl radical. The oxidized CNTs were easily dispersed in ethanol. The H₂O₂ yield on the original CNTs was 102 mg/L at −0.85 V after 90 min; in contrast, H₂O₂ yield on CNTs-15 reached 146 mg/L under the same conditions, resulting from the enhancement of the accessibility of O₂ on CNTs. In the electro-Fenton, the removal of methyl orange on the original CNTs was around 40%, and it increased to 95% on CNTs-15.     

Electrochemical anticorrosion performance evaluation of Al2O3 coatings deposited by MOCVD on an industrial brass substrate

Alumina (Al₂O₃) coatings of different thickness were deposited on OT59 brass substrate (BS) using the metal organic chemical vapour deposition (MOCVD) technique to evaluate the corrosion performance by EIS measurements. The used precursor was dimethyl-aluminium-isopropoxide. Electrochemical characterizations of the deposited films were performed in a standard very aggressive acidic solution (aerated 1N H₂SO₄ at 25 °C up to 168 h of immersion time) by means of direct current method (Tafel curves) and electrochemical impedance spectroscopy (EIS). The Rutherford backscattering spectroscopy (RBS) indicated that the films are very pure with the correct Al₂O₃ stoichiometry, while the IR absorption spectra showed that the films did not contain any OH groups. The surface film morphology was investigated by atomic force microscopy (AFM) and displayed a globular texture. The films were very smooth, with a maximum root mean square roughness, for example, of 14 nm for a 0.96 μm thick coating. The EIS data confirmed, as expected, that a 2.40 μm Al₂O₃ layer ensures the best corrosion protection after 168 h of immersion in the very acidic environment used.     

A DRIFTS study of the heterogeneous reaction of NO2 with carbonaceous materials at elevated temperature

Commercial carbon black, spark generator soot, Diesel soot from passenger car and high-purity graphite were used for the investigation of the reaction of carbonaceous materials with NO₂ applying diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The occurrence of infrared bands was analyzed as they were depending on the reaction temperature. The focus of interest was particularly on the conversion at an elevated temperature of 400 °C. The formation of oxidation products and the adsorption of NO₂ on the surface of the samples were observed. Infrared bands could be attributed to C(O)OR, RNO₂, and RONO as the main functionalities. The comparison of the results from the different samples revealed that different infrared signals appear when NO₂ is adsorbed either on aliphatic or graphitic domains of soot. However, the formation of characteristic bands for an acidic functional group did not occur. This supports the assumption, made in a prior temperature programmed desorption mass spectroscopy (TPD-MS) study, that this group is a transition state.