Effects of transglutaminase-induced cross-linking on properties of fish gelatin–nanoclay composite film

A nanoclay composite film was produced using warm water fish gelatin as a base material and its physical, mechanical, and molecular weight change properties were observed after treatment with microbial transglutaminase. The viscosity of the MTGase-treated gelatin solution (2% w/w) increased from 86.25 ± 1.77 (0 min) to 243 ± 12.37 cp (80 min). SDS–PAGE results indicated that the molecular weight of fish gelatin solutions increased after treatment with microbial transglutaminase. Tensile strength decreased from 61.60 ± 1.77 (0 min) to 56.42 ± 2.40 MPa (30 min), while E% increased from 13.94 ± 5.09 (0 min) to 15.78 ± 5.97% (30 min) at 2% (w/w) MTGase concentration. The oxygen permeability and water vapour permeability did not change as a function of treatment time at 2% (w/w) MTGase concentration. The incorporation of nanoclay inhibited the increase of oxygen permeability. Film colour values (L, a, and b) did not change, but haze values increased from 5.24 ± 0.40 (0 min) to 6.44 ± 0.94 (50 min). XRD and TEM results suggested that the nanoclay was exfoliated in fish gelatin film.     

Effects of gelatin origin,bovine-hide and tuna-skin,on the properties of compound gelatin–chitosan films

With the purpose to improve the physico-chemical performance of plain gelatin and chitosan films, compound gelatin–chitosan films were prepared. The effect of the gelatin origin (commercial bovine-hide gelatin and laboratory-made tuna-skin gelatin) on the physico-chemical properties of films was studied. The dynamic viscoelastic properties (elastic modulus G′, viscous modulus, G″ and phase angle) of the film-forming solutions upon cooling and subsequent heating revealed that the interactions between gelatin and chitosan were stronger in the blends made with tuna-skin gelatin than in the blends made with bovine-hide gelatin. As a result, the fish gelatin–chitosan films were more water resistant (∼18% water solubility for tuna vs 30% for bovine) and more deformable (∼68% breaking deformation for tuna vs 11% for bovine) than the bovine gelatin–chitosan films. The breaking strength of gelatin–chitosan films, whatever the gelatin origin, was higher than that of plain gelatin films. Bovine gelatin–chitosan films showed a significant lower water vapour permeability (WVP) than the corresponding plain films, whereas tuna gelatin–chitosan ones were only significantly less permeable than plain chitosan film. Complex gelatin–chitosan films behaved at room temperature as rubbery semicrystalline materials. In spite of gelatin–chitosan interactions, all the chitosan-containing films exhibited antimicrobial activity against Staphylococcus aureus, a relevant food poisoning. Mixing gelatin and chitosan may be a means to improve the physico-chemical performance of gelatin and chitosan plain films, especially when using fish gelatin, without altering the antimicrobial properties.     

Comparison of Visible–Near Infrared and Short Wave Infrared hyperspectral imaging for the evaluation of rainbow trout freshness

The freshness of rainbow trout is one of the most important quality parameters to attract customers. Common methods to detect fish freshness are usually subjective to the skill of a quality evaluator and are time consuming and destructive. Therefore, an automatic, nondestructive, accurate and quick method is needed. Hyperspectral imaging has demonstrated its efficiency in the meat and fish industries for quality control purposes. This method is nondestructive, fast and automatic. In this study, two setups for hyperspectral imaging named “Visible–Near Infrared” (Vis–NIR) and “Short Wave Infrared” (SWIR) are used to determine fish freshness. Eighty fresh rainbow trouts were divided into four batches which were separately preserved in ice for 1, 3, 5 and 7 days, respectively. Principle Component Analysis (PCA) and Partial Least Squares-Discriminate Analysis (PLS-DA) were used as unsupervised and supervised techniques for the evaluation of rainbow trout freshness. Results obtained by PCA technique indicated that four classes of samples can be detected using the Vis–NIR mean spectrum by applying a second derivative (D2) preprocessing method. The R_CV² and R_Pre with D2 preprocessing were 0.97 and 0.98 for Vis–NIR and 0.84 and 0.67 for SWIR, respectively. The corresponding values of RMSE_CV and RMSE_Pre were 0.16 and 0.14 in Vis–NIR and 0.44 and 0.76 in SWIR, respectively. Classification model achieved an overall correct classification of 100% and 75% for Vis–NIR and SWIR, respectively. The obtained results using both PCA and PLS-DA methods indicated that the Vis–NIR imaging system performs better than SWIR. Among all applied preprocessing techniques, the second derivative preprocessing achieved the best performance.     

The impact of chitosan film or chitosan/chitosan–epigallocatechin gallate conjugate composite film on the quality changes of Asian sea bass (Lates calcarifer) slices stored in air or under vacuum packaging

Quality and shelf-life of Asian sea bass slices (ASBS) wrapped with chitosan (CS)/CS–epigallocatechin gallate (CE) conjugate composite or CS films and packaged in air or under vacuum during storage at 4 °C were studied. Total viable count was less than permissible limit (6 log·CFU g⁻¹ sample) for ASBS wrapped with CS/CE conjugate composite film under vacuum (ASBS-COMP-VP) after 18 days. Moreover, lower microbial proliferation and volatile base contents were attained in ASBS-COMP-VP sample than other samples during the storage (P < 0.05). At the end of storage, ASBS-COMP-VP sample had lower lipid oxidation than those wrapped with CS film (P < 0.05). Polyunsaturated fatty acid content of ASBS-COMP-VP was retained at higher content at day 18. Therefore, ASBS-COMP-VP had the enhanced shelf-life with high acceptability up to 18 days at 4 °C, while ASBS wrapped with CS film and packaged in air or under vacuum had the shelf-life of 9 and 12 days, respectively.     

Antioxidative properties of a chitosan–glucose Maillard reaction product and its effect on pork qualities during refrigerated storage

The objective of this study was to evaluate the antioxidative properties of a chitosan–glucose Maillard reaction product (CG-MRP), and its effect on pork qualities during refrigerated storage. Chitosan (1%), which was dissolved in acetic acid (1%) with 1.0%, 1.5%, or 2.0% glucose, pH adjusted to 6.0, autoclaved (121 °C, 15 min) and cooled, was prepared. The results showed that the 2,2-dipheny1-1-picrylhydrazy1 (DPPH) radical scavenging activities, ferrous ion chelating abilities, and reducing powers of various CG-MRP solutions were not significantly different. Pork loins soaked in the CG-MRP solutions or deionized water for 10 min and without dipping were stored at 4 °C for 7 days. Little influence was observed on the L∗, a∗, and b∗ colour values of the samples. Dipping in CG-MRP tended to retard the increases in volatile basic nitrogen (VBN) and thiobarbituric acid-reactive substances (TBARS) values, and resulted in lower microbial counts during storage. No detrimental influence on the sensory characteristics was found.     

Fabrication and characterization of exfoliated chitosan–gelatin–montmorillonite nanocomposite nanofibers

Polymeric nanofibers as one of the most known nanotechnology products have huge potential applications in many fields due to their high aspect ratio and porosity, being capable of formation of three-dimensional structures and having great mechanical and biological properties. Chitosan is a natural abundant polymer which has attracted huge interests in biomedical and biological industries due to its biocompatible, biodegradable, and non-toxicity properties. However, electrospinning of chitosan is found to be a great challenge, blending it with other polymers such as gelatin was explored as means to improve the morphological deficiencies of chitosan nanofibers and facilitate its electrospinnability. On the other hand, montmorillonite (MMT) has been attracted great attention due to its remarkable improvement in properties of polymeric composites nanofibers. The main objective of this work was on effect of concretion of gelatin–chitosan blends and MMT on morphology of resulted nanocomposite nanofibers. The x-ray diffraction data demonstrated the exfoliation of MMT layers. The morphology of electrospun chiosan–gelatin–MMT composite nanofibers was characterized using scanning electron microscope (SEM). The miscibility of blend was determined using SEM and Fourier transform infrared spectrometer/attenuated total reflectance.     

The antibacterial activity and antibacterial mechanism of the tea polyphenol liposomes/lysozyme–chitosan gradual sustained release composite coating

To obtain long-lasting preservation materials, the tea polyphenol liposomes (TP-Lips)/lysozyme (LZM)–chitosan (CS) composite coating with the gradual sustained property was prepared by tape casting method. These coatings were characterised, and their physicochemical properties were measured. Meanwhile, the antibacterial mechanisms of coatings were studied using the spoilage bacteria of aquatic products (Shewanella putrefaciens and Pseudomonas fluorescens) as target strains. Compared with CS coating, the incorporation of TP-Lips makes the cracks and granular matter of the coatings increase. Except for the oxygen permeabilities (OP) and carbon dioxide permeabilities (CDP), the rest of the physicochemical properties are decreased, including tensile strength (Ts), elongation at break (EB) and light transmittance (T). Antibacterial mechanisms indicate that TP and LZM have a synergistic antibacterial effect. The slow-release system composed of liposomes and coating prolongs the action time of TP and LZM. Hence, the TP-Lips/LZM-CS coating could be a hopeful material in food preservation field with excellent antibacterial properties.     

The effect of high hydrostatic pressure on the microbiological quality and physical–chemical characteristics of Pumpkin (Cucurbita maxima Duch.) during refrigerated storage

Pumpkins were processed at high hydrostatic pressure (HHP) ranging from 350 to 550 MPa for 0.5 min to 30 min. Two different nonlinear mathematical models were compared to fit the inactivation kinetics. The second model consistently produced better fits to the inactivation data than the first model (Weibull model). According to the inactivation of microorganisms, pumpkin was subjected to 450 MPa/15 min and 550 MPa/10 min. The microbiological and physicochemical changes in pumpkin subjected to (HHP) and thermal-treated (854 °C/5 min) were compared during 4 °C storage. The total plate counts (TPC) treated with thermal processing, 450 MPa/15 min and 550 MPa/10 min were 5.12, 4.02 and 1.71 log₁₀ CFU/g, respectively on the 60th day. The growth of microorganisms caused the increase in ΔE, decrease in hardness in other treatments. Treatment of 550 MPa for 10 min had little effect on color during storage. There were no significant changes in the L^⁎, a^⁎ and b^⁎ values (p > 0.05). The hardness of pumpkin treated with 550 MPa/10 min decreased by 32.28% after 60 days. A greater retention of the original color, Vc and antioxidant capacity and increased total phenols were observed in 550 MPa/10 min-treated samples immediately after processing. During storage, color changed, Vc content, total phenols and the antioxidant activity were decreased. While the soluble solids content (SSC), sugars and pH value of pumpkin with HHP or thermal treatment did not show significant change immediately during 60-day storage. Based on these results, working at 550 MPa for 10 min ensures physicochemical and high standard of sanitation parameters in pumpkin.Industrial relevancePumpkin (Cucurbita maxima Duch.) is one of the popular vegetables, and fresh-cut pumpkin requires strict processing treatment and storage conditions to protect its quality. HHP is one promising novel non-thermal technique and is likely to replace thermal processes. A better knowledge of effects of storage temperature on the quality of HHP-treated pumpkin and its storage time prediction through microbiological quality and physical–chemical characteristics analysis of these changes is necessary. The available data would provide technical support for commercial application of the HHP technique in fresh-cut pumpkin processing.     

The effects of incorporated resveratrol in edible coating based on sodium alginate on the refrigerated trout (Oncorhynchus mykiss) fillets’ sensorial and physicochemical features

Food Science and Biotechnology - The goal of this study was examining the effects of sodium alginate coating (SA) containing resveratrol (R) on enhancement rainbow trout fillets’ shelf-life....     

Effect of homogenization conditions on properties of gelatin–olive oil composite films

Gelatin–olive oil composite films were prepared through emulsification to improve water barrier ability of gelatin-based films. The effects of homogenization conditions of film-forming dispersions (FFD) on lipid droplets distributions in the FFD and films were evaluated and compared. Some selected physical properties, e.g., water vapor permeability (WVP), microstructure of the films were also evaluated. The rotor–stator homogenizer provided a lower energy input and so the largest particles were observed in the related FFD and films. These films exhibited excellent water barrier ability, but poor mechanical resistance, extensibility and transparency. The microfluidizer provided the FFD with lower and narrower particle size distributions, promoting mechanical resistance, extensibility and transparency of the films. The physical properties of the emulsified films were dependent on the special microfluidization pressure or cycle used, e.g., the WVP of the films decreased upon increasing microfluidization pressure or cycle. The present results indicated that the microfluidizer can be used to modulate lipid droplets in the FFD, thus films’ properties.     

Preparation and functional properties of fish gelatin–chitosan blend edible films

With the goal of improving the physico-chemical performance of fish gelatin-based films, composite films were prepared with increasing concentrations of chitosan (Ch) (100G:0Ch, 80G:20Ch, 70G:30Ch, 60G:40Ch and 0G:100Ch, gelatin:Ch), and some of their main physical and functional properties were characterised. The results indicated that the addition of Ch caused significant increase (p < 0.05) in the tensile strength (TS) and elastic modulus, leading to stronger films as compared with gelatin film, but significantly (p < 0.05) decreased the elongation at break. Ch drastically reduced the water vapour permeability (WVP) and solubility of gelatin films, as this decline for the blend film with a 60:40 ratio has been of about 50% (p < 0.05). The light barrier measurements present low values of transparency at 600 nm of the gelatin–chitosan films, indicating that films are very transparent while they have excellent barrier properties against UV light. The structural properties investigated by FTIR and DSC showed a clear interaction between fish gelatin and Ch, forming a new material with enhanced mechanical properties.     

Fabrication and evaluation of physicochemical properties of probiotic edible film based on pectin–alginate–casein composite

The objective of this study was to develop a casein-based edible film for the entrapment of probiotic Enterococcus faecium Rp1. Casein, pectin, sodium alginate and glycerol were used to prepare the film. In this study, the physicochemical and morphological properties of casein-based edible film and its impact on the stability of probiotic were evaluated. Surface morphology and properties of the film were tested using a scanning electron microscope, fluorescence microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Probiotic-incorporated casein-based edible film showed significant improvement in the antimicrobial and antioxidant properties and enhanced the structural, optical and thermal properties. Furthermore, the film was found to be desirable to carry probiotics, with the viability of 10⁷ CFU mL⁻¹ rate up to 30 days of storage at 4 °C. Hence, the current study suggests a probiotic-incorporated casein-based edible film for active packaging of food products.     

Preparation of a barley bran protein–gelatin composite film containing grapefruit seed extract and its application in salmon packaging

The physical properties of a composite film prepared from barley bran protein and gelatin (BBG) were investigated. Tensile strength (TS) and elongation at break (E) values of the BBG film decreased as barley bran protein content increased. TS increased with increasing gelatin content, but E values decreased. The optimal conditions for the preparation of the BBG film were 3 g barley bran protein, 3 g gelatin, and 1 g sorbitol in 100 mL film-forming solution. In order to inhibit the growth of pathogenic bacteria, a BBG film containing grapefruit seed extract (GSE) was prepared. After 15 days of storage, populations of Escherichia coli O157:H7 and Listeria monocytogenes inoculated on salmon packaged with the BBG film containing GSE decreased by 0.53 and 0.50 log CFU/g, respectively, compared to the control. Also, packing salmon with the BBG film containing GSE decreased the peroxide value and thiobarbituric acid value by 23.0% and 23.4%, respectively.