Synthesis and photoluminescence of ZnO nanowires/nanorods

We report growth of ZnO nanowires on various substrates using a vapour phase transport method and show that the growth mechanism is vapour-liquid-solid growth. We present photoluminescence data for samples grown on a-plane sapphire at room and low temperatures indicating that the optical quality of these structures is potentially excellent, with intense emission and narrow bound exciton linewidths. The intensity decays rapidly with increasing temperature, indicating a strong temperature-activated non-radiative mechanism whose origin is unclear. We observe a high energy excitonic emission close to the band edge which we assign to the “surface” exciton in ZnO at ∼3.368 eV. This assignment is consistent with the large surface to volume ratio of the nanowire systems under consideration and also indicates that this large ratio has a significant effect on the luminescence even at low temperatures. These surface effects may also be responsible for the rapid decay of the luminescence with increasing temperature via a temperature-activated surface recombination. The nanowire systems appear to offer the prospect of extremely efficient excitonic emission for device applications, and we note that one of the important aspects of achieving this potential will be control of the surface effects via passivation or other means.     

Fabrication of flower-like ZnO microstructures from ZnO nanorods and their photoluminescence properties

In the present work, we reported a novel method for the synthesis of well-dispersed flower-like ZnO microstructures derived from highly regulated, well-dispersed ZnO nanorods by using low temperature (100 °C) hydrothermal process and without using any additional surfactant, organic solvents or catalytic agent. The phase and structural analysis were carried out by X-ray diffraction (XRD) which confirms the high crystal quality of ZnO with hexagonal (wurtzite-type) crystal structure. The morphological and structural analyses were carried out by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) which indicate the formation of well-dispersed ZnO nanorods as well as flower-like ZnO. It has been shown that flower-like ZnO is made up of dozen of ZnO nanorods building block units. The high resolution transmission electron microscopy (HRTEM) and their corresponding selected area electron diffraction (SAED) pattern show that both ZnO nanorods and flower-like ZnO microstructures are single crystalline in nature and preferentially grow along [0 0 0 1] direction. Their optical property was characterized by photoluminescence spectroscopy; shows ZnO nanorods have only violet emission and no other emission while flower-like ZnO microstructures have a weak violet emission and a strong visible emission. A plausible growth mechanism of ZnO nanorods as well as flower-like ZnO microstructures has been given.     

Tuning photoluminescence properties of ZnO nanorods via surface modification

Zinc oxide (ZnO) is a versatile material that has been used in photocatalysis, solar cells, chemical sensors, and piezoelectric transducers. All these are directly related to its surface properties. Here ZnO nanorod arrays were successfully synthesized by electrochemical deposition method, the surface of which was modified by dopamine, a robust anchor. Compared with pristine ZnO sample, the surface modification can greatly enhance the ultraviolet and visible-light photoluminescence. This is due to the formation of polydopamine on the nanorod surface, which may act as a dye that can be photoexcited. The resultant photogenerated electrons can inject into the conduction band of ZnO and take part in the luminescent process. These results may provide a foundation for real applications of ZnO nanomaterials in optoelectronic devices and, especially, for the applications in biological field as both the dopamine and ZnO are biocompatible materials.     

Solvothermal synthesis of hexagonal ZnO nanorods and their photoluminescence properties

Pure hexagonal ZnO nanorods were synthesized by low-temperature (90 °C) solvothermal treatment of zinc acetate in 40-80 wt.% hydrazine hydrate aqueous solutions. The products were characterized by means of powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electronic microscopy (TEM), selected area electron diffraction (SAED), and room temperature photoluminescence (RTPL) spectra. They show a strong UV emission at around 380 nm upon excitation at 360 nm using a Xe lamp at room temperature. The influence on the quality of the nanorods was investigated while the content of the solvent changed. The as-synthesized ZnO nanorods are promising materials for nanoscale optoelectronic devices due to their excellent UV emission properties.     

Preparation of Cu–Zn/ZnO core–shell nanocomposite by surface modification and precipitation process in aqueous solution and its photoluminescence properties

A novel core–shell structure material, Cu–Zn/ZnO, was prepared by a surface modification precipitation process in aqueous solution at low temperature. A nucleation and crystal growth model for this structure was proposed. The resultant nanocomposites were characterized by X-ray diffraction, transmission electron microscope, field emission scanning electron microscope and photoluminescence spectroscope. Results showed that 20–50 nm thick ZnO shell was obtained on the surface of Cu–Zn nanopowders directly in the aqueous solution at 40 °C during the precipitation process and as-synthesized materials have a strong ultraviolet luminescence peak around 379–390 nm, but no usual defect-related emissions in visible range. The quantum confinement effect of ZnO nanocrystals, the presence of Cu and Zn atoms and absence of defects in ZnO layer are believed responsible for the characteristics of the photoluminescence spectra.     

Low-temperature growth of well-aligned ZnO nanorods/nanowires on flexible graphite sheet and their photoluminescence properties

We have grown large-scale well-aligned ZnO nanorods/nanowires on commercial flexible graphite sheet (FGS) at low temperature via chemical vapor deposition method. The products were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. The effects of the growth temperature and oxygen flow rate on the morphology of ZnO nanostructures have been investigated. The growth mechanism of ZnO is found to be a self-catalytic vapor–solid process assisted by the immiscibility of ZnO with graphite. The as-grown ZnO/FGS products show strong green emission and their photoluminescence properties can be tuned by changing growth condition or annealing treatment.     

Photoluminescence properties of single crystalline ZnO/CdS core/shell one-dimensional nanostructures

ZnO/CdS core/shell one-dimensional nanostructures were synthesized using ZnO nanorod arrays as templates, which were fabricated by a vapor transport process. CdS shells with various thicknesses were epitaxially grown on the ZnO nanorod arrays by metal organic chemical vapor deposition. Selected area electron diffraction measurement revealed that both ZnO cores and CdS shells were single crystalline growing along the c-axis. The photoluminescence properties of the ZnO/CdS core/shell nanostructures were also varied with different CdS shell thicknesses. A carrier transition process from ZnO to CdS was assumed to induce the enhancement of CdS photoluminescence.     

Langmuir-Blodgett films of gold/silica core/shell nanorods

We report the preparation of Langmuir- and Langmuir-Blodgett films of mesoporous silica coated gold nanorods. The silica coating on the gold nanorods was found to prevent the aggregation of the plasmonic particles trapped at the air/water interface. Due to the small aspect ratio of the gold core and the presence of the silica shell, the orientational alignment of the nanorods in the Langmuir-Blodgett film is hindered. After particle deposition, no plasmon coupling was observed, which enables the design of the resulting film's optical property at the particle level. By using mesoporous silica as the shell material, the accessibility of the metal core's surface is preserved. Organic dye (Rhodamine 6G) was found to be able to penetrate into the mesoporous shell of the gold nanorods, resulting in a red shift of the longitudinal plasmon mode.     

Structural and optical properties of individual GaP/ZnO core–shell nanowires

Structural and optical properties of ZnO–GaP core–shell nanowires were studied by means of electron microscopy and microphotoluminescence. A thin ZnO shell layer was deposited by RF sputtering on GaP nanowires, which were grown on GaP (111)B substrates under vapour–liquid–solid mode by MOVPE. The SEM and TEM characterization showed that the ZnO shells fully covered the surface of the NWs from top to bottom. Each GaP NW core is composed of many well-defined twinned segments with the planes of twinning oriented in perpendicular to the growth direction. This was contradicted in kinked GaP NWs: their growth direction was initially perpendicular to the twinning planes, but once the NW had kinked, it changed to lie within the twinning planes. The ZnO shell deposited on the GaP core has a columnar morphology. The columns are inclined at a positive angle close to 70° with respect to the GaP growth axis. All observed columns were tilted at this angle to the growth direction. Micro-photoluminescence study showed that thermal annealing improved the quality of the ZnO crystallographic structure; the annealing made observable the photoluminescence peak related to the band-to-band transition in ZnO.     

Zero-phonon linewidth in CdSe/ZnS core/shell nanorods

High-resolution spectral hole-burning studies of CdSe/ZnS core/shell nanorods reveal a sharp zero-phonon line, with a line width dependent on the measurement time scale. The zero-phonon line width is attributed to contributions from radiative decay, spectral diffusion induced by surface electric field fluctuations, and phonon-assisted migration of excitons localized in the nanorods. A decoherence rate as small as 4.5 GHz has been observed, when the effects of spectral diffusion are suppressed in the spectral hole-burning measurement. Comparison between zero-phonon line widths in nanorods and spherical nanocrystals also elucidates important differences in the decoherence process between the one- and zero-dimensional nanostructures.     

Comparison of optical properties of Si and ZnO/CdTe core/shell nanowire arrays

The systematic computations of the short-circuit current density have been performed for Si and ZnO/CdTe core shell nanowire arrays of 1 μm height in order to optimize the structural morphology in terms of nanowire diameter and period. It is found that the best structural configuration for Si leading to the ideal short-circuit current density of 19.6 mA/cm² is achieved for a nanowire diameter and period of 315 nm and 350 nm, respectively. In case of ZnO/CdTe, the ideal short circuit current density is of 24.0 mA/cm², the nanowire diameter and period is of 210 nm and 350 nm, respectively. It is shown that the optimal configuration is more compact in the case of Si nanowire arrays than in the case of ZnO/CdTe nanowire arrays. Since Si has a smaller absorption coefficient than CdTe, a larger amount of material is needed and thus more compact nanowire arrays are required. It is also revealed that core–shell nanowire arrays made of ZnO/CdTe more efficiently absorb light than that of Si, making this device a good candidate for the next generation of nanostructured solar cells.     

Surface-enhanced Raman scattering inside Au@Ag core/shell nanorods

The design and synthesis of plasmonic nanoparticles with Raman-active molecules embedded inside them are of significant interest for sensing and imaging applications.However,direct synthesis of such nanostructures with controllable shape,size,and plasmonic properties remains extremely challenging.Here we report on the preparation of uniform Au@Ag core/shell nanorods with controllable Ag shells of 1 to 25 nm in thickness.1,4-Aminothiophenol (4-ATP) molecules,used as the Raman reporters,were located between the Au core and the Ag shell.Successful embedding of reporter molecules inside the core/shell nanoparticles was confirmed by the absence of selective oxidation of the amino groups,as measured by Raman spectroscopy.The dependence of Raman intensity on the location of the reporter molecules in the inside and outside of the nanorods was studied.The molecules in the interior showed strong and uniform Raman intensity,at least an order of magnitude higher than that of the molecules on the nanoparticle surface.In contrast to the usual surface-functionalized Raman tags,aggregation and clustering of nanoparticles with embedded molecules decreased the surface-enhanced Raman scattering (SERS) signal.The findings from this study provide the basis for a novel detection technique of low analyte concentration utilizing the high SERS response of molecules inside the core/shell metal nanostructures.As an example,we show robust SERS detection of thiram fungicide as low as 10-9 M in solutions.     

Preparation and photoluminescence properties of Eu-doped Ga2O3 nanorods

GaOOH:Eu³⁺ nanorods with different aspect ratios were prepared by hydrothermal method at 140 °C. - and β-Ga₂O₃:Eu³⁺ were converted from as-prepared GaOOH:Eu³⁺ particles by calcination at 500 and 850 °C, respectively. The products were characterized with X-ray diffraction (XRD), transmission electron microscope (TEM) and photoluminescence (PL). Results show that solution pH values play a key role in the formation of the GaOOH:Eu³⁺ powders with different morphologies and - and β-Ga₂:Eu³⁺ inherit the morphology of GaOOH:Eu³⁺ exactly. The photoluminescence characteristics of β-Ga₂O₃:Eu³⁺ were also investigated. Experimental results reveal that the color purity of β-Ga₂O₃:Eu³⁺ nanorods with high aspect ratio is enhanced in comparison with β-Ga₂O₃:Eu³⁺ nanorods with low aspect ratio.     

Synthesis and photoluminescence properties of aligned Zn2GeO4 coated ZnO nanorods and Ge doped ZnO nanocombs

Aligned Zn₂GeO₄ coated ZnO nanorods and Ge doped ZnO nanocombs were synthesized on a silicon substrate by a simple thermal evaporation method. The structure and morphology of the as-synthesized nanostructure were characterized using scanning electron microscopy and transmission electron microscopy. The growth of aligned Zn₂GeO₄ coated ZnO nanorods and Ge doped ZnO nanocombs follows a vapor-solid (VS) process. Photoluminescence properties were also investigated at room temperature. The photoluminescence spectrum reveals the nanostructures have a sharp ultraviolet luminescence peak centered at 382 nm and a broad green luminescence peak centered at about 494 nm.     

CTAB-assisted hydrothermal synthesis of single-crystalline copper-doped ZnO nanorods and investigation of their photoluminescence properties

A simple CTAB-assisted hydrothermal synthesis of undoped and copper-doped ZnO nanorods is reported. The phase and structural analysis carried out by X-ray diffraction, shows the formation of hexagonal wurtzite structure of ZnO. Morphology of the ZnO nanorods was investigated by electron microscopy techniques which showed the formation of well dispersed regular shape ZnO nanorods of 100 ± 10 nm in diameter and 900 ± 100 nm in length. However, size of the copper doped ZnO nanorod slightly increased with increasing copper concentration. Furthermore, the selected area electron diffraction pattern and high resolution transmission electron microscopy reveal that both the undoped and copper doped ZnO nanorods were single crystalline in nature and preferentially grew up along [0001] direction. Optical property was investigated by photoluminescence spectroscopy. The effects of copper doping on the photoluminescence property of ZnO nanorods were investigated.     

Preparation and characterization of ZnO/ZnS core/shell nanocomposites through a simple chemical method

In this paper, we reported the preparation of ZnO/ZnS core/shell nanocomposites by sulfidation of ZnO nanostructures via a simple hydrothermal method. The precursors of bare ZnO nanoparticles and ZnO nanorods were synthesized by a surfactant-assisted hydrothermal growth. The structural, morphological, and element compositional analysis of bare ZnO nanostructures and ZnO/ZnS core/shell nanocomposites were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy techniques. The XRD results indicated that the phase of bare ZnO nanoparticles and ZnO nanorods was wurtzite structure, and the phase of coated ZnS nanoparticles on the surface of bare ZnO nanostructures was sphalerite structure with the size of about 8 nm. Photoluminescence measurement was carried out, and the PL spectra of ZnO/ZnS core/shell nanocomposites revealed an enhanced UV emission and a passivated orange emission compared to that of bare ZnO nanostructures. In addition, the growth mechanism of ZnO/ZnS core/shell nanostructures through hydrothermal method was preliminarily discussed.     

Solvothermal synthesis and photoluminescence properties of ZnO nanorods and nanorod assemblies from ZnO2 nanoparticles

Without the use of any extra surfactant or template, hexagonal phase ZnO crystallites consisting of individual nanorods or nanorod assemblies were synthesized simply by solvothermal treatment of several nanometer ZnO₂ nanoparticles in three different solvents (including ethanol, 80 wt.% hydrazine hydrate aqueous solution and ethylenediamine) at 150 °C for 24 h. The structures and optical properties of the resultant products were characterized by means of X-ray powder diffraction (XRD), scanning electron microscope (SEM), and room temperature photoluminescence (RTPL) spectra. The RTPL spectra of the resultant products all showed a much stronger ultraviolet bandgap emission peaking at around 387 nm and a weaker emission associated with the defect level. The as-synthesized ZnO crystallites are promising materials for the optoelectronic devices due to their excellent UV emission properties.     

CdS/ZnO核壳结构纳米微粒的合成及其发射光谱研究

采用单分子前驱体热分解的方法合成了单分散CdS纳米晶,以CdS纳米晶作为核,在CTAB辅助下,对其表面进行修饰,荧光光谱表明CdS/ZnO核壳结构被成功合成。考查了温度对包覆的影响,结果表明,随着温度的升高晶体结晶越好,包覆越来越完全,ZnO包覆在CdS纳米晶的表面而掩盖了CdS纳米晶的缺陷,使得缺陷发光减弱而带隙发光增强。     

纳米碳管/氧化锌异质结构的合成及发光性质

以纳米碳管（CNTs）为基体、铜为催化剂,采用催化碳热还原方法直接合成出具有异质结构的纳米碳管/氧化锌（CNT/ZnO）复合材料。利用扫描电镜、透射电镜及X射线衍射等手段研究了异质结构CNT/ZnO复合材料的形态和结构。发现氧化锌纳米线在纳米碳管表面的生长过程遵循催化剂诱导的汽-液-固（VLS）机制;氧化锌纳米线与铜催化剂和纳米碳管之间分别存在明显的界面,并且氧化锌纳米线与纳米碳管均保持了规整的晶体结构。同时也发现在大直径纳米碳管上易于形成高密的氧化锌纳米线;随沉积温度的升高ZnO的形态由线到棒最后形成颗粒。异质结构CNT/ZnO复合材料的诱导发光性能不同于氧化锌纳米线和纳米碳管,在蓝光区域的发光强度远大于紫外发光强度。     

ZnO:Sb3+纳米粉的制备及发光性能的研究

采用共沉淀法制备了六方纤锌矿结构的Sb3+掺杂ZnO纳米荧光粉,并系统研究了不同Sb3+掺杂浓度、不同煅烧温度和时间对其发光性能的影响.借助于XRD、SEM、荧光光度计等测试手段对粉体的相组成、形貌及其光致发光性能进行了表征.结果表明:掺杂Sb3+样品的粒度小于未掺杂样品的粒度,当Sb3+掺杂浓度小于3％时,ZnO:S...