Electrosynthesis of β-methylpentadecanedioic acid dimethyl ester

β-Methylpentadecanedioic acid dimethyl ester ( I ) was synthesized electrochemically by Kolbe reaction using β-methylglutaric acid monomethyl ester ( II ) and α,ω-dodecanedioic acid monomethyl ester (III) as starting materials in MeOH solution. Electrolysis was carried out ofr about 4–5 h, when solution pH ≥ 7, followed by extraction with petroleum ether and distillation to obtain a colourless oily product ( I ) The minimum production cost occurred when the mole ration of II to III was 1:1·38 and unreacted III could be recovered. The product synthesized ( I ) completely met the requirement of artificially synthesized musk.     

Photosensitive polymers: Synthesis,characterization, and photocrosslinking properties of polymers with pendant α,β-unsaturated ketone moiety

Acrylate and methacrylate monomers with the photodimerizable α,β-unsaturated ketone moiety, such as 4-cinnamoylphenyl, 4-(4-methoxycinnamoyl)phenyl, 4-(4-nitrocinnamoyl)phenyl, or 4-(4-chlorocinnamoyl)phenyl, were prepared and homopolymerized using benzoyl peroxide as the initiator at 70°C in methyl ethyl ketone. The poly(meth)acrylates were characterized by ultraviolet, infrared, ¹H-nuclear magnetic resonance (NMR), and ¹³C-NMR spectra, and gel permeation chromatography. Their thermal properties were studied by thermogravimetric analyses in air and nitrogen, and differential scanning calorimetry. The photocrosslinking properties of the polymers were investigated as thin films and in solution in the presence and absence of sensitizer. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 2111–2120, 1998     

Ruthenium(II)‐Catalyzed Protocol for Preparation of Diverse α,β‐ and β,β‐Dihaloenones from Diazodicarbonyls

Efficient one‐step syntheses of α,β‐ and β,β‐dihaloenones were achieved by ruthenium(II)‐catalyzed reactions between cyclic or acyclic diazodicarbonyl compounds and oxalyl chloride or oxalyl bromide in moderate to good yields. This methodology offers several significant advantages, which include ease of handling, mild reaction conditions, one‐step reaction, and the use of an effective and non‐toxic catalyst. The synthesized compounds were further transformed into highly functionalized novel molecules bearing aromatic rings on the enone moiety using the Suzuki reaction.

     

Stereoelective polymerization of β-butyrolactone

Racemic β-butyrolactone was polymerized using chiral initiators obtained from the reaction of organometallic derivatives (ZnEt₂, CdMe₂, AlEt₃) with R(−) 3,3 dimethyl-1,2 butanediol. With the zinc initiator, R(+) enantiomer is preferentially incorporated in the polymer chain with a stereoelectivity ratio r_R equal to 1.6. Crude polymer was fractionated into a crystalline, predominantly isotactic, part and an amorphous heterotactic part, both optically active. Sites of different stereospecificities, present in the initiator, are all active for the stereoelective polymerization. With the cadmium initiator, S(−) enantiomer is preferentially polymerized (r_s = 1.01), extending homosteric-antisteric rules previously established for thiiranes. Aluminium initiator leads to an homosteric process (r_R = 1.1). Chiroptical properties (o.r.d. and c.d.) of polymers prepared with zinc initiator show a predominance of R-configurational units, indicating that ring-opening occurs by O-acyl cleavage with retention of configuration.     

Synthesis of bulk and alumina-supported γ-Mo2N catalysts by a single-step complex decomposition method

A single-step complex decomposition method for the synthesis of bulk and alumina-supported γ-Mo₂N catalysts is described. The complex precursor (HMT)₂(NH₄)₄Mo₇O₂₄·2H₂O (HMT: hexamethylenetetramine) is converted to γ-Mo₂N under a flow of Ar in a temperature range of 823–1023 K. Furthermore, decomposition of the precursor in a NH₃ flow forms γ-Mo₂N in a temperature range of 723–923 K. Compared with direct decomposition of the precursor in Ar, the reaction in NH₃ shows obvious advantages that the nitride forms at a lower temperature. In addition, alumina-supported γ-Mo₂N catalysts with different nitride loadings can be prepared from the alumina-supported complex precursor in the Ar or NH₃ flow. The resultant catalysts exhibit good dibenzothiophene HDS activities, which are similar to the γ-Mo₂N/γ-Al₂O₃ prepared by traditional TPR method. The catalyst prepared by decomposition in an Ar flow exhibits highest activity. It proves that such a single-step complex decomposition method possesses the potential to be a general route for the preparation of molybdenum nitride catalysts.     

Effect of Processing Variables on the Solution Characteristics of γ-Glycidoxypropyltrimethoxysilane (γ-GPS)

The effects of the hydrolysis and condensation processes on the molecular structure of γ-glycidoxypropyltrimethoxysilane (γ-GPS) in aqueous solutions were investigated using Fourier-transform nuclear magnetic resonance (FT-NMR) spectroscopy and FT-Raman spectroscopy. Hydrolysis was characterized by monitoring the production of methanol and the decrease in concentration of SiOCH₃ groups in 1% solutions of deuterium oxide using proton NMR. The production of methanol and loss of methoxy groups in 25% solutions of γ-GPS in water was characterized using Raman spectroscopy. Hydrolysis was found to be a very rapid process, whose rate could be increased or decreased by altering the pH of the solution. NMR spectroscopy showed that hydrolysis was complete in a 1% γ-GPS solution in deuterium oxide after 34 minutes. Raman spectroscopy also showed hydrolysis to be rapid and complete in a 25% solution of γ-GPS in water after 1 hour. Condensation, on the other hand, took a relatively long time to occur. In the NMR spectra, condensation was observed by the broadening of peaks due to the protons on the carbon atom adjacent to the silicon atom. In the Raman spectra, condensation was characterized by the disappearance of the SiOH band near 725 cm^-1 and the development of an SiOSi band near 600 cm^-1. In addition to the proton NMR, Si-29 NMR was used to characterize the silane in 10% solutions of γ-GPS in water. The Si-29 NMR showed oligomer growth with respect to time. The oligomer growth was correlated with mechanical test results.     

Synthesis and characterization of polyimide‐γ‐Fe2O3 nanocomposites

Novel polyimide‐γ‐Fe₂O₃ hybrid nanocomposite films (PI/γ‐Fe₂O₃) has been developed from the poly(amic acid) salt of oxydianiline with different weight percentages (5, 10, 15 wt %) of γ‐Fe₂O₃ using tetrahydrofuran (THF) and N,N‐dimethylacetamide (DMAc) as aprotic solvents. The prepared polyimide‐γ‐Fe₂O₃ nanocomposite films were characterized for their structure, morphology, and thermal behavior employing Fourier transform infrared spectroscopy (FTIR), scanning electron micrograph (SEM), transmission electron micrograph (TEM), X‐ray diffraction (XRD), ¹³C‐NMR, and thermal analysis (TGA/DSC) techniques. These studies showed the homogenous dispersion of γ‐Fe₂O₃ in the polyimide matrix with an increase in the thermal stability of the composite films on γ‐Fe₂O₃ loadings. Magnetization measurements (magnetic hysteresis traces) have shown very high values of coercive force indicating their possible use in memory devices and in other related applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 834–840, 2007     

Imprinted β‐cyclodextrin polymers using naringin as template

The objective of this study was to identify a kind of molecular imprinting polymer (MIP) which was suitable for recognizing naringin (NG) in aqueous medium. Based on two crosslinkers (hexamethylene diisocyanate and epichlorohydrin) and two polymerization methods (solution polymerization and emulsion polymerization), four non‐covalent naringin‐β‐cyclodextrine (NG‐β‐CD) imprinted polymers were prepared by using β‐CD as a functional monomer and NG as a template molecule. The binding property and selectivity were evaluated by equilibrium binding experiments. These demonstrated that all the sites in the MIPs show good selective binding ability for NG from naringin dihydrochalcone, a structurally similar molecule. Of the four MIPs, rod‐like 3# MIP which was prepared by emulsion polymerization using hexamethylene diisocyanate as crosslinker exhibited the highest selectivity, its imprinting factor α being 1.53. Scatchard analysis of 3# MIP suggests that there are two classes of binding sites during the MIP's recognition of NG. Additionally, the 3# MIP could be used at least five times without any loss in sorption capacity. Copyright © 2011 Society of Chemical Industry     

A comparison between β- and USY-zeolite-based hydrocracking catalysts

Two series of zeolite-based hydrocracking catalysts were prepared to study the effects of the support type, preparation method and metal loading on catalyst properties and hydrocracking activity for hydrotreated vacuum gas oil (HT-VGO). The support used was γ-Al₂O₃ and β-zeolite in the first series and γ-Al₂O₃ and USY-zeolite in the second series. Nickel and tungsten were loaded as active metals on these supports. The prepared catalysts were characterized as to their surface area, pore volume, thermal stability, reducibility and acidity characteristics. The characterization results revealed that catalysts displayed significant differences in properties dependent on the preparation method and the type of support used. Catalysts from both series showed promising results for HT-VGO hydrocracking in the batch reactor. A correlation exists between the reducibility of oxidic form and the hydrogenation activity of the sulfided form of the catalysts. The higher the reducibility, the higher the hydrogenation activity. Catalysts prepared on mixed supports gave higher amounts of saturates.     

Negative effect of stretching on the development of β‐phase in β‐nucleated isotactic polypropylene

On the premise that shear in the slit die of an extruder was minimized as far as possible, β‐nucleated isotactic polypropylene (iPP) was extruded. Simultaneously, once the extrudate (in the melt state) left the die exit, it was stretched at various stretching rates (SRs). For iPP with a low content of β‐nucleating agent (β‐NA), the crystallinity of β‐phase (X_β) initially increases with increasing SR, and then decreases slightly with further increase in SR. However, for iPP containing a higher content of β‐NA, with increasing SR, X_β decreases monotonically, indicating a negative effect of SR on β‐phase formation. Small‐angle X‐ray scattering and polarized optical microscopy experiments reveal that, when SR is less than 30 cm min^?1, the increasing amount of row nuclei induced by increasing SR is mainly responsible for the increase of X_β. In contrast, when SR exceeds 30 cm min^?1, the overgrowth of shish structures unexpectedly restrains the development of β‐phase, and spatial confinement is considered as a better explanation for the suppression of β‐phase. Copyright © 2011 Society of Chemical Industry     

β‐Polypropylene/wood flour composites: Effects of specific β‐nucleation and coupling agent on mechanical behavior

Polypropylene/wood flour composites were prepared by melt compounding. To improve their mechanical performance, the matrix polypropylene was modified with a specific nucleation agent based on an amide of dicarboxylic acid, which promotes crystallization predominantly in the β‐phase. The resulting material was used as a matrix for composites containing 10%, 20%, and 30% of wood flour. Uniform dispersion of the filler and improved interfacial adhesion was ensured by compatibilization with a small amount of maleic anhydride‐grafted polypropylene. A beneficial effect of application of the nucleation agent together with a compatibilizer on the resulting mechanical behavior was shown. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 506–511, 2007     

Desulfurization of commercial fuels by π-complexation: Monolayer CuCl/γ-Al2O3

Monolayer CuCl/γ-Al₂O₃ sorbent was studied for desulfurization of a commercial jet fuel (364.3 ppmw S) and a commercial diesel (140 ppmw S). The sorbent was prepared by means of spontaneous monolayer dispersion methods. Deep desulfurization (sulfur levels of <1 ppmw) was accomplished with this sorbent using a fixed-bed adsorber. The CuCl/γ-Al₂O₃ sorbent was capable of removing 6.4 and 11.2 mg of sulfur per gram for jet fuel at breakthrough (at <1 ppmw S) and saturation, respectively. The same sorbent was capable of removing 0.94 and 1.8 mg of sulfur per gram for BP diesel at breakthrough and saturation, respectively. The difference in sulfur capacities for jet fuel and diesel was apparently caused by the difference in concentrations of strongly binding compounds, such as nitrogen heterocycles, heavy (polynuclear) aromatics and fuel additives. In comparison with CuCl/γ-Al₂O₃, Cu(I)Y zeolite has higher sulfur capacities but is less stable and can be easily oxidized to Cu(II)Y by fuel additives (such as oxygenates) and moisture and consequently loses π-complexation ability. However, all these cuprous π-complexation sorbents selectively adsorb thiophenic compounds over aromatics and olefins (as predicted by the high separation factors), which resulted in the observed desulfurization capability. A feasibility study is shown for efficient regeneration of CuCl/γ-Al₂O₃ using ultrasound at ambient temperature. Possible problems associated with desulfurization using π-complexation sorbents for commercial fuels are discussed.     

Electrochemical synthesis and characterization of poly[3-(ω-bromoalkyl)thiophene]s

A novel series of functionalized polythiophenes incorporating 3-(ω-bromoalkyl) pendants are synthesized by electrochemical polymerization. The effect of the solvent on the electrosynthesis is investigated. The polymeric films are characterized using cyclic voltammetry, FT-IR, AFM and SEM microscopy. The poly[3-(6-bromohexyl)thiophene] film cast on GC or ITO electrode surface is compared with a sample obtained by a chemical method.     

Organocatalytic Enantioselective Michael Reaction of Malononitrile with β,β‐Disubstituted Nitroalkenes

We have developed and optimized an enantioselective Michael reaction of malononitrile with β,β‐disubstituted nitroalkenes. This reaction was catalyzed by a cinchona alkaloid derived thiourea catalyst, producing products of high yields (up to 98 %) and stereoselectivities (up to 93 % ee). One of the adducts was used as an intermediate for the synthesis of dihydropyrrole derivative bearing a synthetically valuable quaternary chiral center.

     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Structural characterization of α‐ and β‐nucleated isotactic polypropylene

Modification of isotactic polypropylene (iPP) with two nucleation agents, namely 1,3:24‐bis(3,4‐dimethylobenzylideno) sorbitol (DMDBS) (α‐nucleator) and N, N′‐dicyclohexylo‐2,6‐naphthaleno dicarboxy amide (NJ) (β‐nucleator), leads to significant changes of the structure, morphology and properties. Both nucleating agents cause an increase in the crystallization temperature. The efficiency determined in a self‐nucleation test is 73.4 % for DMDBS and 55.9 % for NJ. The modification with NJ induces the creation of the hexagonal β‐form of iPP. The addition of DMDBS lowers the haze of iPP while the presence of NJ increases the haze. Copyright © 2004 Society of Chemical Industry     

Chemoenzymatic Preparation of Enantiopure Homoadamantyl β‐Amino Acid and β‐Lactam Derivatives

Racemic cis‐10‐azatetracyclo[7.2.0.1^2,6.1^4,8]tridecan‐11‐one was prepared from homoadamant‐4‐ene by chlorosulfonyl isocyanate addition. The transformation of the β‐lactam to the corresponding β‐amino ester followed by Candida antarctica lipase A‐catalyzed enantioselective (E>>200) N‐acylation with 2,2,2‐trifluoroethyl butanoate afforded methyl (1R,4R,5S,8S)‐5‐aminotricyclo[4.3.1.1^3,8]undecane‐4‐carboxylate and the (1S,4S,5R,8R)‐butanamide with>99% ee at 50% conversion. Alternatively, transformation of the β‐lactam to the corresponding N‐hydroxymethyl‐β‐lactam and the following Pseudomonas cepacia (currently Burkholderia cepacia) lipase‐catalyzed enantioseletive O‐acylation provided the (1S,4S,6R,9R)‐alcohol (ee=87%) and the corresponding (1R,4R,6S,9S)‐butanoate (ee>99%). In the latter method, competition for the enzyme between the (1R,4R,6S,9S)‐butanoate, 2,2,2‐trifluoroethyl butanoate and the hydrolysis product, butanoic acid, tended to stop the reaction at about 45% conversion and finally gave racemization in the (1S,4S,6R,9R)‐alcohol with time.     

Electrochemical polymerisation of thiophene derivative induced by Lewis acid: Electrosynthesis of poly[(R)-(−)-2-(3′-thienyl)ethyl-(3′,5″-dinitrobenzoyl)-α-phenylglycinate]

Films of poly[(R)-(−)-2-(3′-thienyl)ethyl-(3′,5″-dinitrobenzoyl)-α-phenylglycinate] were deposited on ITO electrodes by potentiodynamic, potentiostatic and galvanostatic methods using a (C₄H₉)₄NBF₄/CH₃CN electrolyte system containing 20% boron trifluoride diethyl etherate. Polymerisation occurred as a charge dependent process at a potential of 1.4 V vs. Ag/Ag⁺(CH₃CN). The surface morphologies of the films so-formed were examined using atomic force microscopy. The film deposited by the galvanostatic method displayed more homogeneous grain geometry and a larger superficial area than those formed by the other methods. Cyclic voltammetry revealed a well defined redox couple at the anodic region, attributable to polymer p-doping, and a poorly defined redox pair at the cathodic region, attributable to the reduction of the nitro group. The polymeric films obtained were yellow in colour (λ_max 425 nm) in the reduced state and light blue (λ_max 745 nm) in the oxidised state.     

Preparation, characterization and deactivation studies of Co–Mo/γ–Al2O3 deoxidizing catalyst

A deoxidizing catalyst was prepared in this paper. Several characterization techniques (XRD, SEM–EDS, TEM, TPD and TPR) were used to study its structure and properties. A normal pressure micro-reactor was built to study its deoxidizing performance. Results show that when inlet O₂ concentration was 0.1%, space velocity was 3000–12 000 h⁻¹ and operation temperature was above 80 °C, the outlet residual O₂ can be as low as 1.0 × 10⁻⁶ (v/v). 300 h continuous operation shows that its deoxidizing activity was stable. Through comparison of the deoxidizing activities for fresh and deactivated catalyst and by simulating the water vapor contents in system, the mechanism of deactivation and reactivation was studied.     

Synthesis,characterization, and corrosion inhibition study of polyaniline‐α‐Fe2O3 nanocomposite

Polyaniline (PANI)‐α‐Fe₂O₃ nanocomposites (NCs) have been synthesized by chemical oxidative in situ polymerization of aniline in presence of α‐Fe₂O₃ nanoparticles at 5°C using (NH₄)₂S₂O₈ as an oxidant in an aqueous solution of sodium dodecylbenzene sulphonic acid (SDBS), as surfactant and dopant under N₂ atmosphere. The room temperature conductivity of NCs decreases and coercive force (H_c) increases with an increase addition of α‐Fe₂O₃ in PANI matrix. The result of FTIR and TGA shows that the interaction between α‐Fe₂O₃ particles and PANI matrix could improve the thermal stability of NCs. NCs demonstrate the superparamagnetic behavior. The performance of PANI and PANI‐α‐Fe₂O₃ NCs as protective coating, against corrosion of 316LN stainless steel in 3.5% NaCl was assessed by potentiodynamic polarization technique. The study shows a good corrosion inhibition effect of both the coatings. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013