共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
OTDR事件分析和故障判断的研究与实现 总被引:2,自引:2,他引:0
随着光通信技术的发展,对光纤在线自动监测系统的需求越来越高,文章提出了一种采用小波分析定位光纤断点及反射事件的方法,并把用这种方法分析出来的事件形成专家事件分析库,来判断故障的位置.这些技术应用在TJTG型光纤在线自动监测系统中的实践表明,减小了测试盲区,提高了事件和故障位置判断的准确性. 相似文献
3.
光时域反射仪(OTDR)测试中,系统链路噪声严重影响测试准确度,尤其是对于0.05~0.2 dB熔接损耗的准确检测,需要提高测试曲线的信噪比。根据OTDR波形特点,在小波阈值去噪的基础上提出一种改进的小波去噪方法,改进阈值利用对数函数的非线性并引入噪声方差,更利于滤除噪声;改进阈值判断函数留下原始数据细节并滤除噪声,且不改变反射事件和非反射事件的波形属性。实际测试表明:测试曲线相对信噪比提升了10 dB以上,去噪后配以曲线平滑滤波和恒虚警(CFAR)检测,准确检测出熔接事件。 相似文献
4.
基于光纤拉断引起菲涅尔反射机理,考虑大型工程结构多处随机裂缝监测的需求,利用普通商用光时域反射计(OTDR)提出了可同时探测多处随机裂缝的多段分布式光纤裂缝监测系统设计方法。该系统由多区段传感光路和传输光路组成,混凝土开裂时光纤被拉断,使用OTDR识别光纤中的菲涅尔反射以确定裂缝位置。其次,分析了影响该系统监测裂缝数目的主要因素为光纤耦合器的耦合比、OTDR的动态范围以及光纤断点处菲涅尔反射峰值。结果表明,该系统对于普通商用OTDR理论上最多可探测到49个断点。在此基础上,设计制作了钢筋混凝土受弯构件裂缝演化规律的多段分布式光纤裂缝监测系统,使用普通商用OTDR成功地监测到受弯构件加载过程中的多个随机裂缝的演化过程,证明了该系统实际应用的可行性和有效性。 相似文献
5.
为了实现对信号和噪声的有效分离,从而对光缆线路中的故障点进行准确定位,避免对故障点的漏判/误判,改善故障的定位精度,文章提出一种对通信光缆线路中的故障点进行定位和检测的方法,基于小波变换模极大值监测信号奇异点的理论,并结合阈值去噪法来对OTDR(光时域反射仪)测试曲线进行去噪。结果表明,该方法能对OTDR测试曲线进行有效去噪,更准确地确定光缆故障点的位置。 相似文献
6.
浅谈OTDR在光缆线路测试中的应用 总被引:1,自引:0,他引:1
随着光缆线路的大量敷设和使用,OTDR的应用越来越广泛。OTDR(Optical Time Do-main Reflectometer,光时域反射仪)是表征光纤传输特性的测试仪器,主要用于测试整个光纤链路的衰减并提供与长度有关的衰减细节,具体表现为探测、定位和测量光纤链路上任何位置的事件(事件是指因光纤链路中熔接、连接器、弯曲等形成的缺陷,其光传输特性的变化可以被测量)。本文首先介绍了OTDR及其工作原理、测试方式和方法,然后着重分析了OTDR测不准的原因及相关改进办法,最后从应用角度介绍了OTDR测试中的几点经验和技巧。 相似文献
7.
8.
9.
10.
杨中文 《光纤与电缆及其应用技术》2014,(2):31-35
介绍了一种基于华为专利技术的PON网络区分分支光纤的方法,该方法可以单独显示分光器后各个分支光纤的OTDR测试曲线,便于准确识别各个分支的光纤衰减事件和反射事件,并探讨这一方法对运营商在ODN网络的工程验收、业务发放、资源管理和故障分责等方面所能够提供的帮助。 相似文献
11.
分析了OTDR工作的理论基础和主要原理,对OTDR中的技术难点进行了阐述,并提出了一种基于小波算法的解决方案,目的是对OTDR信号中的噪声进行滤波和信号中的事件点进行精确定位。经过理论论证和实践数据表明,该方法是一种可行的方案 相似文献
12.
As a fiber sensor,optical time domain reflectometer becomes more and more popular to measure parameters,such as strain and temperature in structural health monitoring(SHM) simultaneously.Since the accuracy of range resolution in optical time domain reflectometer(OTDR) is determined by the pulse width of laser,the range resolution in order of centimeter is achieved by employing of picoseconds lasers which are not commercial.In this paper,to achieve this accuracy with conventional OTDR,Fourier wavelet regular... 相似文献
13.
14.
描述了幻峰及其对OTDR测试光纤线路的影响,重点从理论上分析了OTDR在“最小二乘法”模式下的工 作原理,并对OTDR在“最小二乘法”模式和“两点法”模式下测试光纤接头损耗进行了比较。 相似文献
15.
A novel technique is proposed for measuring the relative-index difference of the fiber links using an optical time-domain reflectometer (OTDR). The material dispersion of the fiber links can be estimated by using this method. Moreover, the chromatic dispersion distribution of a fiber link is successfully estimated by combining this technique with the conventional OTDR technique 相似文献
16.
17.
To improve the range resolution in inexpensive conventional long pulse optical time domain reflectometer (OTDR) for application in structural health monitoring (SHM) and robotic neural network, the Fourier Wavelet Regularized Deconvolution (ForWaRD) based on the adaptive wavelet method is employed. Since Deconvolution is a noise sensitive process, employing the (ForWaRD) method enhances the signal to noise ratio. Simulation for long pulse OTDR system is done and ForWaRD method is employed to improve the resolution of the OTDR system to the order of several centimeters. In this method the resolution is limited by the bandwidth of detector, bandwidth of electronic circuit, and the sampling rate of analog to digital convertor. 相似文献
18.
The measurement of the Raman scattering in a single-mode optical fiber using optical time-domain reflectometry (OTDR) is reported. The OTDR technique makes it possible to determine the power level of the pump and Stokes components along the fiber without cutting it back, and to estimate Raman scattering parameters in a reliable manner. The measurement method is described and experimental results are discussed. It is concluded that the power conversion process to higher Stokes components has been clearly displayed without cutting back the fiber 相似文献
19.
20.
光时域反射仪(OTDR)是通信链路中光纤特性测试的专用仪器,半导体激光器是OTDR的关键元器件,激光器的性能直接影响OTDR的测试距离、测试精度等。为适应OTDR的应用需求,提出并研制了一种非对称分别限制(SCH)激光器,SCH结构可有效提高激光器的输出功率和斜率效率。同时,采用应变多量子阱结构来提高器件的温度特性。研制的1 550nm±20nm工作波长的激光器,其单模尾纤输出功率大于等于60mW(工作电流300mA,25℃),激光器上升/下降时间小于1ns,完全满足OTDR长距离、高精度测试的使用要求。 相似文献