Temperature‐Dependent Phase Transitions in the Lead‐Free Piezoceramics (1 – x – y)(Bi1/2Na1/2)TiO3–xBaTiO3–y(K0.5Na0.5)NbO3 Observed by in situ Transmission Electron Microscopy and Dielectric Measurements

Lead‐free piezoelectric (1 – x – y)(Bi_1/2Na_1/2)TiO₃–xBaTiO₃–y(K_0.5Na_0.5)NbO₃ (BNT–BT–KNN) ceramics were examined in situ under increasing temperature in the transmission electron microscope. Changing superstructure reflections indicate a transition from rhombohedral to tetragonal to cubic phase with broad coexistence regions. The additional evolution of the microstructure in combination with dielectric measurements leads to a model of two relaxor‐type phase evolutions with temperature.     

Properties and structures of nonstoichiometric (K,Na)NbO3‐based lead‐free ceramics

The 0.968[(K_0.48Na_0.52)]Nb_0.95+xSb_0.05O₃–0.032(Bi_0.5Na_0.5)ZrO₃ [KNN_xS–BNZ] lead‐free ceramics with nonstoichiometric niobium ion were fabricated via conventional solid‐state sintering technique and their piezoelectric, dielectric and ferroelectric properties were investigated. When x = 0.010, enhanced piezoelectric properties (d₃₃ ≈ 421 pC/N and k_p ≈ 0.47) were obtained due to the construction of rhombohendral—tetragonal phase boundary near room temperature. The KNN_xS–BNZ ceramics possesses enhanced Curie temperature (T_c) with improved piezoelectric constant. A large d₃₃ of ~421 pC/N and a high T_c ~256°C can be simultaneously induced in the ceramics with x = 0.010. Especially, good thermal stability was observed in a broad temperature range. The results indicated that our work could benefit development of KNN‐based ceramics and widen their application range.     

The Relationship Between Phase Structure and Electrical Properties in (1 − x)(Bi0.5Na0.5TiO3–Ba0.5K0.5TiO3–BaTiO3)‐ xK0.5Na0.5NbO3 Quaternary Lead‐Free Piezoelectric Ceramics

(1 ? x)(0.85Bi_0.5Na_0.5TiO₃–0.11Ba_0.5K_0.5TiO₃–0.04BaTiO₃)‐ xK_0.5Na_0.5NbO₃ lead‐free piezoelectric ceramics with x = 0.00, 0.02, 0.03, 0.04, 0.05, and 0.10 were prepared by a conventional solid state method. A coexistence of rhombohedral (R) and tetragonal (T) phases was found in the system, which tended to evolve into pseudocubic symmetry when x increases. The x = 0.04 sample exhibited improved electrical properties: the dielectric constant ε_r = 1900 with the low loss tangents 0.06, the S_max/E_max of ~400 and ~460 pm/V under unipolar and bipolar electric field, respectively. Meanwhile, piezoelectric constant d₃₃ still maintained ~160 pC/N. These could be owed to the formation of polar nanoregions for relaxor phase.     

Effects of Bi0.5Na0.5HfO3 addition on the phase structure and piezoelectric properties of (K,Na)NbO3‐based ceramics

Lead‐free perovskite (1‐x)(K_0.48Na_0.48Li_0.04)Nb_0.95Sb_0.05O₃‐x(Bi_0.5Na_0.5)HfO₃ piezoelectric ceramics were prepared by a traditional ceramic fabrication method. An investigation was conducted to assess the effects of (Bi_0.5Na_0.5)HfO₃ content on the crystal structure, microstructure, phase‐transition temperatures, and piezoelectric properties of the ceramics. The X‐ray diffraction results, combined with the temperature dependence of dielectric properties, revealed that the ceramics experienced a structural transition from an orthorhombic phase to a tetragonal phase with the addition of (Bi_0.5Na_0.5)HfO₃, and a coexistence of orthorhombic and tetragonal phases was identified in the composition range of 0.005≤x≤0.015. An obviously improved piezoelectric activity was obtained for the ceramics with compositions near the orthorhombic‐tetragonal phase boundary, among which the composition x=0.005 exhibited the maximum values of piezoelectric constant d₃₃, and planar and thickness electromechanical coupling coefficients (k_p and k_t) of 246 pC/N, 0.435, and 0.554, respectively. Furthermore, the Curie temperature of the ceramics was found decreasing with the increase in (Bi_0.5Na_0.5)HfO₃ content, but still maintaining above 300°C for the phase boundary compositions. These results indicate that the ceramics are promising lead‐free candidate materials for piezoelectric applications.     

Orthorhombic‐pseudocubic phase transition and piezoelectric properties of (Na0.5K0.5)(Nb1−xSbx)‐SrZrO3 ceramics

0.96(Na_0.5K_0.5)(Nb_1?xSb_x)‐0.04SrZrO₃ ceramics with 0.0≤x≤0.06 were well sintered at 1060°C for 6 hours without a secondary phase. Orthorhombic‐tetragonal transition temperature (T_O‐T) and Curie temperature (T_C) decreased with the addition of Sb₂O₅. The decrease in T_C was considerable compared to that in T_O‐T, and thus the tetragonal phase zone disappeared when x exceeded 0.03. Therefore, a broad peak for orthorhombic‐pseudocubic transition as opposed to that for orthorhombic‐tetragonal transition appeared at 115°C‐78.2°C for specimens with 0.04≤x≤0.06. An orthorhombic structure was observed for specimens with x≤0.03. However, the polymorphic phase boundary structure containing orthorhombic and pseudocubic structures was formed for the specimens 0.04≤x≤0.06. Furthermore, a specimen with x=0.055 exhibited a large piezoelectric strain constant of 325 pC/N, indicating that the coexistence of orthorhombic and pseudocubic structures could improve the piezoelectric properties of (Na_0.5K_0.5)NbO₃‐based lead‐free piezoelectric ceramics.     

Phase-composition dependent domain responses in (K0.5Na0.5)NbO3-based piezoceramics

Lead-free (K_0.5Na_0.5)NbO₃-based (KNN) piezoceramics featuring a polymorphic phase boundary (PPB) between the orthorhombic and tetragonal phases at room temperature are reported to possess high piezoelectric properties but with inferior cycling stability, while the ceramics with a single tetragonal phase show improved cycling stability but with lower piezoelectric coefficients. In this work, electric biasing in-situ transmission electron microscopy (TEM) study is conducted on two KNN-based compositions, which are respectively at and off PPB. Our observations reveal the distinctive domain responses in these two ceramics under cyclic fields. The higher domain wall density in the poled KNN at PPB contributes to the high piezoelectric properties. Upon cycling, however, a new microstructure feature, “domain intersection”, is directly observed in this PPB composition. In comparison, the off-PPB KNN ceramic develops large domains during poling, which experience much less extent of disruption during cycling. Our comparative study provides the basis for understanding the relation between phase composition and piezoelectric performance.     

Orientation dependence of electric field induced phase transitions in lead-free (Na0.5Bi0.5)TiO3-based single crystals

The orientation dependence of the electric field induced strain and phase transitions in 0.92(Na_0.5Bi_0.5)TiO₃–0.06BaTiO₃–0.02(K_0.5Na_0.5)NbO₃ (NBT–6BT–2KNN) single crystals has been investigated. The evolution of Raman spectra with electric field reveals that a tetragonal ferroelectric phase is initially induced at E = 14 kV/cm and completed above E = 25 kV/cm for [001] oriented single crystals. When the electric field is applied along [111] direction, a partial phase transition from pseudocubic to rhombohedral structure is triggered at E = 19 kV/cm, which is higher than that for inducing tetragonal ferroelectric phase along [001] direction. Both field-induced phase structures and stability of NBT–6BT–2KNN single crystal are strongly associated with the crystallographic orientations. These results provide a better understanding to the field-induced macroscopic strain in lead-free NBT-based ferroelectrics.     

Compositional inhomogeneity and segregation in (K0.5Na0.5)NbO3 ceramics

In this report, the effects of the calcination temperature of (K_0.5Na_0.5)NbO₃ (KNN) powder on the sintering and piezoelectric properties of KNN ceramics have been investigated. KNN powders are synthesized via the solid-state approach. Scanning electron microscopy and X-ray diffraction characterizations indicate that the incomplete reaction at 700 °C and 750 °C calcination results in the compositional inhomogeneity of the K-rich and Na-rich phases while the orthorhombic single phase is obtained after calcination at 900 °C. During the sintering, the presence of the liquid K-rich phase due to the lower melting point has a significant impact on the densification, the abnormal grain growth and the deteriorated piezoelectric properties. From the standpoint of piezoelectric properties, the optimal calcination temperature obtained for KNN ceramics calcined at this temperature is determined to be 800 °C, with piezoelectric constant d₃₃=128.3 pC/N, planar electromechanical coupling coefficient k_p=32.2%, mechanical quality factor Q_m=88, and dielectric loss tan δ=2.1%.     

Effect of BiMeO3 on the Phase Structure,Ferroelectric Stability,and Properties of Lead‐Free Bi0.5(Na0.80K0.20)0.5TiO3 Ceramics

The effects of BiMeO₃ (Me = Fe, Sc, Mn, Al) addition on the phase transition and electrical properties of Bi_0.5(Na_0.80K_0.20)_0.5TiO₃ (BNKT20) lead‐free piezoceramics were systematically investigated. Results showed that addition of BiFeO₃ into BNKT20 induces a phase transition from tetragonal–rhombohedral coexisted phases to a tetragonal phase with the observation of enhanced piezoelectric properties (d₃₃ = 150 pC/N for 0.02BiFeO₃). BiScO₃, BiMnO₃, and BiAlO₃ substitutions into BNKT20 induce a phase transition from coexistence of ferroelectric tetragonal and rhombohedral to a relaxor pseudocubic with a significant disruption of the long‐range ferroelectric order, and correspondingly adjusts the ferroelectric–relaxor transition point T_F–R to room temperature. Accordingly, large accompanying normalized strains of 0.34%–0.36% are obtained near the ferroelectric–relaxor phase boundary, and the mergence of large strain response can be ascribed to a reversible field‐induced ergodic relaxor‐to‐ferroelectric phase transformation. Moreover, our study also revealed that the composition located at the ferroelectric–relaxor phase boundary where the strain response is consistently derivable shifts to a BNKT20‐rich composition as the tolerance factor t of the end‐member BiMeO₃ increases, and this relationship is expected to provide a guideline for designing high‐performance (Bi_0.5Na_0.5)TiO₃‐based materials by searching the ferroelectric–relaxor phase boundary.     

Impedance Spectroscopy of (Bi1/2Na1/2)TiO3–BaTiO3 Ceramics Modified with (K0.5Na0.5)NbO3

The electrical and dielectric properties of (1 ? x)(0.94Bi_1/2Na_1/2TiO₃–0.06BaTiO₃)–x(K_0.5Na_0.5NbO₃) with x = 0, 0.03, 0.09, 0.18 have been investigated by impedance spectroscopy over a wide temperature range. The dc conductivity of the ceramics follows the Arrhenius law with an activation energy ranging from ~1.20 to 1.50 eV. Measurements under different atmospheres show the materials exhibit n‐type semiconducting behavior at elevated temperatures. The presence of a highly polarizable phase for all compositions is revealed by electric modulus (M″) spectra. The Burns temperature decreases with increasing KNN content. The change in temperature‐dependent permittivity with composition is explained by the difference in thermal evolution of polar nanoregions induced by the addition of KNN.     

Domain Structure of Poled (K0.50Na0.50)1−xLixNbO3 Ceramics with Different Stabilities

Domain structure of several poled (K_0.50Na_0.50)_1?xLi_xNbO₃ ceramics (with chemical compositions of x = 0.03, 0.065, and 0.08, respectively) was investigated by means of observing the domain patterns with an acid‐etching technique. Among the three ceramics, the one with x = 0.03 is of orthorhombic phase and the other two are of tetragonal phase at room temperature. It was found that these ceramics possess distinctly different features of domain patterns and show a large difference in the time‐aging stability of piezoelectric properties. For the ceramic with x = 0.03, domain patterns consist of simply one single set or a few sets of parallel stripes inside the polycrystalline grains. In contrast, for those with x = 0.065 or 0.08, herringbone‐type patterns and a large number of watermarks are additionally observed. Furthermore, the ceramic with x = 0.03 was confirmed to have a much better time‐aging stability of piezoelectric properties than the other two. The results indicate that domain structure is more stable in orthorhombic phase than in tetragonal phase.     

Structure,Ferroelectric, Piezoelectric,and Ferromagnetic Properties of BiFeO3‐BaTiO3‐Bi0.5Na0.5TiO3 Lead‐Free Multiferroic Ceramics

Lead‐free multiferroic ceramics of BiFeO₃‐BaTiO₃‐Bi_0.5Na_0.5TiO₃ have been prepared by a conventional ceramic technique. The microstructure, multiferroic, and piezoelectric properties of the ceramics have been studied. The ceramics sintered at 1000°C for 2 h possess a pure perovskite structure and a morphotropic phase boundary of rhombohedral and tetragonal phases is formed at x = 0.02. After the addition of Bi_0.5Na_0.5TiO₃, two dielectric anomalies are observed at high temperatures (T_m ~ 510°C–570°C and T₂ ~ 720°C). The phase transition around T_m becomes wider gradually with increasing x. The ferroelectricity, piezoelectricity, and ferromagnetism of the ceramics are significantly improved after the addition of Bi_0.5Na_0.5TiO₃. High resistivity (~1.3 × 10⁹ Ω·cm), strong ferroelectricity (P_r = 27.4 μC/cm²), good piezoelectricity (d₃₃ =140 pC/N, k_p = 31.4%), and weak magnetic properties (M_r =0.19 emu/g) are observed.     

The NbO6 octahedral distortion and phase structural transition of Eu3+‐doped K0.5Na0.5NbO3–xLiNbO3 ferroelectric ceramics

A small quantity of Eu³⁺ ions were doped in the lead‐free ferroelectric K_0.5Na_0.5NbO₃–xLiNbO₃ (KNN–xLN, 0 ≤ x ≤ 0.08) ceramics to investigate the NbO₆ octahedral distortion induced by the increasing LN content. In addition, the phase structure, ferroelectric, and photoluminescence properties of K_0.5Na_0.5NbO₃–xLiNbO₃:0.006Eu³⁺ (KNN–xLN:0.006Eu³⁺) lead‐free piezoelectric ceramics were characterized. All the X‐ray diffraction, Raman spectra, dielectric constant vs temperature measurements and the photoluminescence of Eu³⁺ ions demonstrated that the prepared ceramics undergo a polymorphic phase transition (PPT, from orthorhombic to tetragonal phase transformation) with the rising LN content, and the PPT region locates at 0.05 ≤ x ≤ 0.06. The ferroelectric properties, Raman intensity ratios and photoluminescence intensity ratios show similar variations with the increasing LN content, all with a maximum value achieved at the PPT region. We believe that the close relationship among the ferroelectric properties, Raman intensity ratios, and photoluminescence intensity ratios is caused by the NbO₆ octahedral distortion. The photoluminescence of Eu³⁺ ion was discussed basing on the crystal‐symmetry principle and Judd‐Ofelt theory.     

Piezoelectric properties of (Na0.5K0.5)(Nb1‐xSbx)O3‐SrTiO3 ceramics with tetragonal‐pseudocubic PPB structure

CuO‐added 0.96(Na_0.5K_0.5)(Nb_1‐xSb_x)O₃‐0.04SrTiO₃ ceramics sintered at the low temperature of 960°C for 10 hours showed dense microstructures and high relative densities. The specimens with 0.0 ≤  x ≤ 0.04 had orthorhombic‐tetragonal polymorphic phase boundary (PPB) structure. Tetragonal‐pseudocubic PPB structure was observed in specimens with 0.05 ≤  x ≤ 0.07, while the specimen with x = 0.08 has a pseudocubic structure. The structural variation in the specimens is explained by the decreases in the orthorhombic‐tetragonal transition temperature and Curie temperature with the addition of Sb⁵⁺ ions. The specimens with 0.05 ≤  x ≤ 0.07, which have tetragonal‐pseudocubic PPB structure, had large electric field‐induced strains of 0.14%‐0.016%. Moreover, these specimens also showed increased d₃₃ values between 280 pC/N and 358 pC/N. In particular, the specimen with x = 0.055 showed particularly enhanced piezoelectric properties: d₃₃ of 358 pC/N, k_p of 0.45, and the electric field‐induced strain of 0.16% at 4.5 kV/mm.     

Preparation and Electric Properties of Bi0.5Na0.5TiO3–Bi(Al0.5Ga0.5)O3 Lead‐Free Piezoceramics

A new lead‐free BNT‐based piezoelectric ceramics of (1 ? x)Bi_0.5Na_0.5TiO₃–xBi(Al_0.5Ga_0.5)O₃ (x = 0, 0.02, 0.03, 0.04, and 0.05) were synthesized using a conventional ceramic fabrication method. Their structures and electrical properties were investigated. All the samples show a typical ferroelectric P(E) loops and S(E) curves at room temperature. The optimal properties are obtained at the composition of the x = 0.03. The substitution of Bi(Al_0.5Ga_0.5)O₃ enhances piezoelectric constant and increases Curie temperature from 58 pC/N and 310°C of pure BNT to 93 pC/N and 325°C of the x = 0.03. The temperature‐dependent P(E) loops and S(E) curves of 0.97BNT–0.03BAG indicate that phase transition from ferroelectric to antiferroelectric takes place over a very wide temperature region from 80°C to 180°C. The results show that the introduction of BAG improves the electrical properties of BNT.     

Strong Red Emissions in Pr3+‐Doped (K0.5Na0.5)NbO3–CaTiO3 Diphase Ceramics

The photoluminescence and temperature sensing properties based on down‐shifting emission of Pr³⁺‐doped (K_0.5Na_0.5)NbO₃–yCaTiO₃ (KNN: yCT) diphasic materials were systematically investigated. Under 447‐nm excitation, Pr³⁺‐doped KNN: yCT samples exhibited significantly enhanced red emission at 603 nm assigned to ¹D₂→³H₄ transitions of Pr³⁺ ions. The red emission intensities reached the optimum value with y = 0.05 near the polymorphic phase transition region. The origin of the enhanced red emission is mainly ascribed to the doping‐induced lattice symmetry change. The energy level transitions from the typical f–f transitions to the valence‐to‐conduction transitions were observed as CaTiO₃ concentration increases above a critical concentration of y = 0.05. Furthermore, the sample with y = 0.05 also possessed excellent temperature response properties in a wide temperature range 300–473 K and the maximum sensing sensitivity was 0.016 K^?1. The Pr³⁺‐doped (K_0.5Na_0.5)NbO₃–yCaTiO₃ red emission materials with admirable intrinsic piezoelectric properties may have important technological promise in novel multifunctional devices.     

Phase transition behavior and electrical properties of (1 − x)Bi0.5Na0.5TiO3–x(Na0.53K0.44Li0.04)(Nb0.88Sb0.08Ta0.04)O3 lead-free ceramics

(1 ? x)Bi_0.5Na_0.5TiO₃–x(Na_0.53K_0.44Li_0.04)(Nb_0.88Sb_0.08Ta_0.04)O₃ (BNT–xNKLNST) with x = 0–0.10 lead-free piezoelectric ceramics were prepared by a solid state method, and the structure and electrical properties were investigated in this study. It is found that a morphotropic phase boundary (MPB) of rhombohedral (R) and tetragonal (T) phase exists in the range of 0.03 ≤ x ≤ 0.05 and the structure changes to paraelectric phase when x > 0.07. The samples with x = 0.05 exhibit improved electrical properties owing to the formation of MPB, which are as follows: piezoelectric constant d₃₃ = 120 pC/N, remnant polarization P_r = 39.4 μC/cm² and coercive field E_c = 3.6 kV/mm. These results indicate that the enhanced piezoelectric properties for BNT can be achieved by forming the coexistence of R and T phase.     

Dielectric,ferroelectric and field-induced strain behavior of K0.5Na0.5NbO3-modified Bi0.5(Na0.78K0.22)0.5TiO3 lead-free ceramics

Lead-free piezoelectric (1 ? x)Bi_0.5(Na_0.78K_0.22)_0.5TiO₃–xK_0.5Na_0.5NbO₃ (BNKT–xKNN, x = 0–0.10) ceramics were synthesized using a conventional, solid-state reaction method. The effect of KNN addition on BNKT ceramics was investigated through X-ray diffraction (XRD), dielectric, ferroelectric and electric field-induced strain characterizations. XRD revealed a pure perovskite phase with tetragonal symmetry in the studied composition range. As the KNN content increased, the depolarization temperature (T_d) as well as maximum dielectric constant (?_m) decreased. The addition of KNN destabilized the ferroelectric order of BNKT ceramics exhibiting a pinched-type hysteresis loop with low remnant polarization (11 μC/cm²) and small piezoelectric constant (27 pC/N) at 3 mol% KNN. As a result, at x = 0.03 a significant enhancement of 0.22% was observed in the electric field-induced strain, which corresponds to a normalized strain (S_max/E_max) of ～434 pm/V. This enhancement is attributed to the coexistence of ferroelectric and non-polar phases at room temperature.     

Dielectric Properties and Impedance Analysis of K0.5Na0.5NbO3–Ba2NaNb5O15 Ceramics with Good Dielectric Temperature Stability

(1?x)(K_0.5Na_0.5)NbO₃–xBa₂NaNb₅O₁₅ [(1?x)KNN–xBNN, 0 ≤ x ≤0.1] ceramics were prepared by solid‐state reaction method. X‐ray diffraction analysis of the ceramics revealed that the crystal structure changed from orthorhombic to rhombohedral with increasing BNN content. Dielectric measurement showed that the ceramics exhibited good dielectric temperature stability over a wide temperature range. Basic mechanisms of the conduction and relaxation processes have been investigated using impedance spectroscopy analyses. It was concluded that the conduction and relaxation processes were thermally activated and oxygen vacancies were the possible ionic charge carriers at higher temperatures.     

Temperature‐Insensitive High Strain in Lead‐Free Bi0.5(Na0.84K0.16)0.5TiO3–0.04SrTiO3 Ceramics for Actuator Applications

Lead‐free piezoelectric ceramics, 0.96[{Bi_0.5 (Na_0.84K_0.16)_0.5}_1?xLi_x(Ti_1?yNb_y)O₃]–0.04SrTiO₃ (BNKLiTN–ST) with x, y = 0–0.030, were synthesized by solid‐state reaction method. X‐ray diffraction patterns indicated that Li and Nb successfully diffused into the BNKT–ST lattice and formed a pure perovskite structure with x, y ≤ 0.025. Increasing the Li and Nb contents (x, y = 0.020) induced a phase transformation from the coexistent rhombohedral–tetragonal phases for pure BNKT–ST ceramics to a pseudocubic phase, resulting in degradation of the remnant polarization and coercive field. However, the field‐induced strain was markedly enhanced at x, y = 0.020, giving rise to a giant dynamic piezoelectric constant (d₃₃* = S_max/E_max = 800 pm/V). Furthermore, the temperature dependence of the field‐induced strain response showed temperature‐insensitivity up to 120°C. To explore its potential for device applications, a 10‐layered stack‐type multilayer actuator was fabricated from the optimal composition (x, y = 0.020). This actuator showed a large S_max/E_max of 600 pm/V at a relatively low driving field of 4.5 kV/mm suggesting highly promising results in lead‐free BNT‐based ceramics.